stuck in start uo sreen - Mogul, XV6800 General

I have alltel titan I accidentally flash the sprint rom now its stuck on start up screen? I want just want to upgade it to 6.1 rom any suggestion?
Thanks,

Please supply current bootloader, radio, and rom versions

I manage to flash back my phone but not its on verizon rom? the problem is when the phone turn off for battery saving when I press the power buttom to turn on its not turning on even I change the setting for when the device turn off press any key to turn on it will not. Unless I reset the device, any suggestion for this one?
Thanks
Here is the Bootloader Screen:
TITA100
SPL-2.47NocHEM Titan SPL EVT
CPLD-9
ROM VERSION: 2.09.605.8
RADIO VERSION: 1.30.60
Atlast Problem was sold update the thr Radio version from the previous one to 3.35.04 then I flash the ROM. now working smoth

Related

HTC P3300 stuck in boot screen

hi.
i got this p3300 and it doesnt fully turn on.After i press power in remains stuck on the boot screen : the one with the HTC logo and info about the rom:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
I tried to flash rom but it fails at 2 or 3% saying image file corruputed which i think its right because i dont think it was unlocked so you can write any rom you want.
I also tried USPL but that i get "NO devive connected" so i cant unlocked my device to write a proper rom into it.
I did all the above with the device in boot mode (record button+reset).
Any ideea?Pls help.
Thank you!
?
tried flashing with HTC_1.12.405.01_026790_WWE_SHIP says invalid model...
T-Mobile dead loop ?
I have similar problem with my artemis. I have a HTC P3300 from T-Mobile. It started with switching itself out, then it didn't want to boot, then it began to hang on bootscreen and at the moment i cannot start it at all (even the battery is fully charged and it is pluggen in my PC).
I suspect that T-mobile build in a dead loop somewhere in the software or hardware. It looks very suspicious to me that both mdas i had from T-Mobile start to make problems exactly a month or or two after the warranty is expired. and the problems develop in the same way in deteriorating manner.
It could be that the hardware cannot take it anymore and it starts to deteriorate exactly after the second year (handy for two years contracts).
Does anyone similar experiences or anyone solved that problem.
Sorry mates I cannot provide you with any info about my PPC (radio, rom version etc.) because I simply cannot get so far to be able to see that information.
Looking forward hearing from you
Cheerz
Hi, my problem is similar, but I need the ROM in ITAlian.
Information about my cellphone:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
Any ideea how to download this ROM? Pls help.
Thanks, Fernando.
Here the same...any one help?
kappp13 said:
hi.
i got this p3300 and it doesnt fully turn on.After i press power in remains stuck on the boot screen : the one with the HTC logo and info about the rom:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
I tried to flash rom but it fails at 2 or 3% saying image file corruputed which i think its right because i dont think it was unlocked so you can write any rom you want.
I also tried USPL but that i get "NO devive connected" so i cant unlocked my device to write a proper rom into it.
I did all the above with the device in boot mode (record button+reset).
Any ideea?Pls help.
Thank you!
Click to expand...
Click to collapse
Have you tried the CMON USPL? It's on Shady's ROM (the lite one) run this first! Be in Bootloader. Hold the Record Key (left key) and by holding that press Power key to switch on! Then try to Update your ROM

IPL 3.14 makes my ELF battery dried after power-off?

I've been reading on the upgrade to 6.1 with various cooked rom, and decided to go with Tessa 4.5. Since it is required to go with IPL 3.10/SPL 3.10, i went from original ROM and upgrade one step at a time, to 1.17, 2.26 and 2.28, and 3.10 (both IPL and SPL). Then I noticed after 3.10, i cannot boot up. This is before I upgrade to Tessa, just upgrading IPL/SPL.
When in 2.26, everytime upgrade completed, reboot went fine. But after 3.10, it went wrong. I tried to fix it with upgrading IPL only to 3.14.
It still wont boot up after power down.
So I downgrade to IPL/SPL 2.28. The SPL went down, but IPL stays at 3.14, and the problem continues. I can upgrade to Onyx, but everytime I power down, i have to flash with IPL/SPL 2.28 to make the ELF boot up. When I get to the OS, i check my battery is 0%.
Is IPL 3.14 the culprit? If yes, how do I downgrade it? using elf-uspl and/or Rom Utility gives same result: IPL stays at 3.14.
Help?
Update:
i was able to flash with elf-uspl using ipl/spl 2.27/2.28.
Now i have onyx junior with the ipl/spl combination above.
But it is still having problem when I turned off the device. It won't go pass smart mobility, instead it just shut down again. I have to take out the battery, put it back in, then reflash with rom utility (with any spl/ipl below 3.0) then it would restart and go pass smart mobility and enter the OS.
What gives?
Update2:
After trying to downgrade and upgrade, I use the original HTC Touch ROM, Windows 6.0. Still the problem appear. So I decided to go with elf-uspl and get the SPL back to 1.11000 (which was the initial working setup). Then I flashed the IPL to 1.17002.
Now, with IPL 1.17002 and SPL 1.1100, everything went back to normal.
Is this mean I cannot use SPL above my initial setting? Obviously the newer cooked rom won't accept these number, as it needs to have 3.10 minimum?
Update2:
After trying to downgrade and upgrade, I use the original HTC Touch ROM, Windows 6.0. Still the problem appear. So I decided to go with elf-uspl and get the SPL back to 1.11000 (which was the initial working setup). Then I flashed the IPL to 1.17002.
Now, with IPL 1.17002 and SPL 1.1100, everything went back to normal.
Is this mean I cannot use SPL above my initial setting? Obviously the newer cooked rom won't accept these number, as it needs to have 3.10 minimum?
I finally settled with IPL/SPL 1.19 since this is the only setting that would still boot to OS after I Power Off the device. Now looking for Win 6.1 coked rom that would accept these IPL/SPL setting...
Update2:
After trying to downgrade and upgrade, I use the original HTC Touch ROM, Windows 6.0. Still the problem appear. So I decided to go with elf-uspl and get the SPL back to 1.11000 (which was the initial working setup). Then I flashed the IPL to 1.17002.
Now, with IPL 1.17002 and SPL 1.1100, everything went back to normal.
Is this mean I cannot use SPL above my initial setting? Obviously the newer cooked rom won't accept these number, as it needs to have 3.10 minimum?
I finally settled with IPL/SPL 1.19 since this is the only setting that would still boot to OS after I Power Off the device. Now looking for Win 6.1 cooked rom that would accept these IPL/SPL setting...

DE ROM

i have upgrade rom
radio version 1.14.25.24
rom 1.59.841.69(48753) WWE
PROTOCOL 52.64.25.34u
TELSTAR
PRPBLEM IS MY SIGNAL POOR.. EVERTIME MY HTC SEARCHING ONLY. MY NETWORK TO ZERO
HELP .. WHAT I CAN DO..
mayong said:
i have upgrade rom
radio version 1.14.25.24
rom 1.59.841.69(48753) WWE
PROTOCOL 52.64.25.34u
TELSTAR
PRPBLEM IS MY SIGNAL POOR.. EVERTIME MY HTC SEARCHING ONLY. MY NETWORK TO ZERO
HELP .. WHAT I CAN DO..
Click to expand...
Click to collapse
Did you follow this guide? You may find your SPL is incompatible with the rom your using. The first thing you need to do is check what your SPL version currently is. To do this you need to enter bootloader by:
Turn it off.
Hold the volume down button while you press the power on button.
You should see a tri-color screen with some text (This is bootloader).
Fallen Spartan said:
Did you follow this guide? You may find your SPL is incompatible with the rom your using. The first thing you need to do is check what your SPL version currently is. To do this you need to enter bootloader by:
Turn it off.
Hold the volume down button while you press the power on button.
You should ee a tri-color screen with some text (This is bootloader).
Click to expand...
Click to collapse
now i do this i get is my spl is 1.54.000 so how
mayong said:
now i do this i get is my spl is 1.54.000 so how
Click to expand...
Click to collapse
Did you use USPL or HSPL to flash rom or radio?

Green gradient boot screen and phone function not working

Hello folks,
My device is a QTEK A9100.
After updating my rom to one with WM6.5 I noticed that my boot screen now looks like a gradient from green to black like the picture attached.
The problem is that the phone now doesn't activate de radio. It show no signal and when I try to enable the phone in comm manager, it doesn't enable it.
So I decided to go back to WM6.1. Right now I'm using X2H's WM6.1 Manila UI - http://forum.xda-developers.com/showpost.php?p=3459150&postcount=8
Also, the battery light is not staying lit when the usb or power cable are connected and active sync is not detecting the phone. Also the phone less responsive then usual.
IPL/SPL version are shown as follows in the boot screen:
IPL: 2.21.0001
SPL: 2.21.olip
<-- blank line
OS: 6.1.0.0
Settings > System > Device Information shows in the Version tab:
ROM version: 6.1.0.0 WWE
ROM date: 1/16/08
It does not show radio or protocol version as I saw in another screen shots.
Any ideas on how to enable the radio and make active sync detects the phone?
help anyone?
the blank line at the boot can mean there is the corrupt radio or something similar...the radio version is showed there
i think the best way is try an hard reset, and if it don't work the way is flash a radio...
Hard Reset didn't work.
Tried to install radios 3.02.11 and 2.69.11 and nothing.
The rom install finishes without error but after the device resets it looks like the same it was before. It show no GSM version at the boot screen and the boot screen keep showing for almost 2 minutes.
reflash your stock rom.
josefcrist said:
reflash your stock rom.
Click to expand...
Click to collapse
Thanks, I did it and still the same.
Now the IPL and SPL are version 2.22.0001
But the green boot screen remains and still not show the GSM version.
The WM is laggy and at the device information screen I can only see the rom version, the rom date and the ext rom version.
No information about protocol or radio version.
It seems that no matter what radio I flash, it's not stored in the device.
Any other ideias?

I cant use my HTC Trophy. Please Help me out

Hello, I have HTC 7 Trophy. Here are some specs:
Bootloader
PC40100 SS-BC(4K)
SPL-5.10.2250.1(131801) MNG
MicroP (LED) 0x09
Touch A1(v10,20)
I cant use my HTC mobile. Please Help me out
What do you mean by you can't use it?
Can you load the OS? Are you stuck on the tri-color boot screen?
Have you attempted HSPL on it? (because the bootloader would need to be downgraded).
Heya
The phone is user locked.
I am not getting the proper wayout how to install new ROM update.
Which ROM is compatible with this Booltloger.
In the boot logger screen um am not getting Serial no also..
Please help me out with the proper process and how can do with the proper way..
Please help
You must of tried to install a custom rom without install DFT's HSPL. Or, you may have attempted to install another rom that wasn't fully compatibly with your phone?
Is your phone branded with your carrier, or does it simply say HTC? We need to find a stock rom that will work with your phone.
My HTC Trophy would not boot at all .. Please help
Followed update instructions, froze on step 8 of 9 of the WP7.5 update. Tried to cancel, phone totally dead and will not start at all.
Phone model: HTC 7 Trophy
Mobile Operator: Unlocked
IMEI : 351763042252302
S/N : HT13HR700038
P/N : 99 HKM004-00
Mobile OS version: cannot check, phone is dead
Firmware revision : cannot check, phone is dead
Hardware revision: cannot check, phone is dead
Radio software: cannot check, phone is dead
Radio hardware: cannot check, phone is dead
Bootloader : ?
Chip SOC: ?
All can be found on the phone under settings and about (I am aware that you are unable to restart your phone, so please provide what you can).
PC OS version: Windows 7
Zune version: 4.8.2345.0
Country: Ghana
Can you enter the bootloader by holding vol down+Power from power off?
You will probably have to flash a stock rom.
TheXev said:
Can you enter the bootloader by holding vol down+Power from power off?
You will probably have to flash a stock rom.
Click to expand...
Click to collapse
Hello.. The phone is totally dead .. not even charging .. Do you know where i can get the mother board .. or is there another solution for my situation
thx
Wow, no....
If possible, try to send the phone in for warranty work.. unless the phone wasn't unbranded when you bought it. I find it hard to believe that it won't start.
Try this first, put the battery pack in a different phone and charge it, then try to start the phone. I know for me, I have two different phones with the same battery pack.

Categories

Resources