Database Users

coincidence or faulty?

hi all,
i have a little problem.
i am pretty confident in upgrading my rom and i usually upgrade to duttys but,
last night i thought i would try:
[ROM][WWE][18.06.2009] Miri WM 6.5 21815 :: V 19.0 [ONLINE]
i did what i would normally do hold power on and down.....blah blah blah...
everything worked fine untill....
the phone reset and run the align screen! it now looks like the drivers need to be loaded on the screen, the display has turned all green and pixleated, i thought it was the rom i just downloaded so, i downloaded the latest dutty run that install and it done exactly the same thing and got the same result BUT if i press the off button (not to shutdown) just to turn screen off then press it back on again the display is fine????? untill the system restarts and then it is all poxlated again.
Also the dutty rom runs really slow i mean we are talking 2 mins for the touch flo to respond and then sometimes phone locks up or just resets
i have tried a master reset in the new(and previous) rom and still it is the same.
orignal:
R 1.12.25.16
G 52.60.25.330
D 1.56.47.501
new:
R 1.14.25.24
G 52.64.25.34h
D 1.59 dutty
hope you can help
HTC HD Owner

htchdowner said:
hi all,
i have a little problem.
i am pretty confident in upgrading my rom and i usually upgrade to duttys but,
last night i thought i would try:
[ROM][WWE][18.06.2009] Miri WM 6.5 21815 :: V 19.0 [ONLINE]
i did what i would normally do hold power on and down.....blah blah blah...
everything worked fine untill....
the phone reset and run the align screen! it now looks like the drivers need to be loaded on the screen, the display has turned all green and pixleated, i thought it was the rom i just downloaded so, i downloaded the latest dutty run that install and it done exactly the same thing and got the same result BUT if i press the off button (not to shutdown) just to turn screen off then press it back on again the display is fine????? untill the system restarts and then it is all poxlated again.
Also the dutty rom runs really slow i mean we are talking 2 mins for the touch flo to respond and then sometimes phone locks up or just resets
i have tried a master reset in the new(and previous) rom and still it is the same.
orignal:
R 1.12.25.16
G 52.60.25.330
D 1.56.47.501
new:
R 1.14.25.24
G 52.64.25.34h
D 1.59 dutty
hope you can help
HTC HD Owner
Click to expand...
Click to collapse
I am assuming you are using USPL? Did you re-use USPL before flashing either of these roms?

Fallen Spartan said:
I am assuming you are using USPL? Did you re-use USPL before flashing either of these roms?
Click to expand...
Click to collapse
nope just went into the screen that gives me the multicolours, and hen the software took over from that....i have always done it that way.

just found the following on this very site....(now i am not panicking and i am actually taking my time to read the forums properly)
http://forum.xda-developers.com/showthread.php?t=505377
now i can go and change my pants.

htchdowner said:
nope just went into the screen that gives me the multicolours, and hen the software took over from that....i have always done it that way.
Click to expand...
Click to collapse
If you are using USPL you need to reuse it before every flash to either radio or rom.
Alternatively use HSPL which is permanent
If you don't use USPL or HSPL you will get green screen problems as well as connections problems and other issues which could wreck your phone
Yes, I know cRaCKwHoRe, he's a good mate and also a beta tester like me.
If you follow his guide, which you'll notice is also linked in my signature, you'll be fine
EDIT
Its actually not as bad as you think. Once you get the hang of it you'll be fine

i think all he needs is the newer hspl
coz if you have old hspl and flash a newer rom u get the display error

-PiLoT- said:
i think all he needs is the newer hspl
coz if you have old hspl and flash a newer rom u get the display error
Click to expand...
Click to collapse
Probably right. Just depends on what he already has and what his SPL says in bootloader.
@ htchdowner - Go into bootloader by:
1. Turn off device
2. Hold down vol down
3. Continue to hold vol down and turn on device
You will be presented with a tri-colour screen
What does it say after SPL?

[Solved!] Problem with flashing! (1.48 NLD > 1.66 WWE)

Hello,
A friend of mine told me it was able to just flash the rom by running the .exe from the htc website, nothing else was required.
So I did, and then it went wrong
I got an error fairly at the beginning of the flashing saying:
ERROR 294 (Invalid Vendor ID) I believe.
So that´s that, no problem, I´ll just put the standard Dutch rom back right?
Wrong, that rom says my phone isn't responding..
I can't use my phone right now, it doesn't go to contacts for example, and it can't start Sense.
I also get an error after a reboot "Problem with cprog.exe", and "Goog" can't be opened.
I've read all sorts of things about goldcard, HSPL and more. Can someone please tell me how to properly fix this? It's not important if the Dutch 1.48 rom or the WWE 1.66 rom is being flashed to it, but I just need to phone to work again, then I'll get the rom flashing thing sorted out.
ps: I used win7 while flashing, also read that this could be a potential problem?
Please help me

You need to wait till 1.66 NLD comes out.
WWE can be only flashed using Goldcard, SSPL, HSPL

I understand that, but can you tell me how to flash an older NLD rom back?
The RUU says my phone doesn't respond.

Chopper88 said:
I understand that, but can you tell me how to flash an older NLD rom back?
The RUU says my phone doesn't respond.
Click to expand...
Click to collapse
Download the 1.48 NLD from HTC.com
Start your device, you should see a black grey warning sign.
Plugin cable, run exe and follow the steps.

That doesn't work, also my phone doesn't seem to be bricked, it just won't start Sense.
I can go into wm 6.5's start menu etc. It just doesn't boot the rom because there is none i guess?
When plugging in the cable and running the exe, it just says "Err 244, device not responding" because I can't make an activesync connection.

Chopper88 said:
That doesn't work, also my phone doesn't seem to be bricked, it just won't start Sense.
I can go into wm 6.5's start menu etc. It just doesn't boot the rom because there is none i guess?
When plugging in the cable and running the exe, it just says "Err 244, device not responding" because I can't make an activesync connection.
Click to expand...
Click to collapse
Shutdown Device.
Hold Camer button and then press (while holding camera button) the shutdown button.
This brings you into the bootloader.
Plugin cable till the screen changes from Serial to USB.
Flash ROM.

I'm sorry, but what do you mean by the 'Camera' button?
I've tried holding the camera icon in the wm menu, and then pressing the off button, but it just locks the screen.
I'm feeling like a retard now haha, but I really can't figure it out.

Chopper88 said:
I'm sorry, but what do you mean by the 'Camera' button?
I've tried holding the camera icon in the wm menu, and then pressing the off button, but it just locks the screen.
I'm feeling like a retard now haha, but I really can't figure it out.
Click to expand...
Click to collapse
Ooh my bad, I ment volume down (was thinking of a other device)
Volume down + powerbutton.
Good luck

Thanks man!
That worked!
This is my first smartphone, and I'm defenitly going to read a whole bunch of tutorials now before doing this kind of stupid thing again...

Chopper88 said:
Thanks man!
That worked!
This is my first smartphone, and I'm defenitly going to read a whole bunch of tutorials now before doing this kind of stupid thing again...
Click to expand...
Click to collapse
Just Flash HSPL and be free to do whatever you want.
Just in case you want to return it, flash NLD 1.48 back using the SD card method, and your phone is ready to be sent back to HTC

Yeah just flashed HSPL onto it.
Do you recommend using the sd card method or the active sync method for the 1.66 WWE rom?
And thanks again man It works fine again.

Chopper88 said:
Yeah just flashed HSPL onto it.
Do you recommend using the sd card method or the active sync method for the 1.66 WWE rom?
And thanks again man It works fine again.
Click to expand...
Click to collapse
Active Sync.
Cause flashing a Stock rom using SD card method, will flash your SPL back to stock.
So this way you will get the invalid vendor ish....

Done, now running 1.66 WWE
Thanks for your quick answers!

Chopper88 said:
Done, now running 1.66 WWE
Thanks for your quick answers!
Click to expand...
Click to collapse
Ur welcome, enjoy ur stay @ XDA.

now that's what i call: helping each other...!!!
Very well!

HELP!!!!!!!!!!!!!!!!!!!! Crashed?

Hi
Just installed [ROM WWE 21/3/10] NEW CleanEx HQ 1.05 + Others [WM6.5][1.72/2.10][2.5.2012]
but the 1.20 version.
Before I installed I had the HTC original 1.66 ROM
_HTC HD2_RUU_Leo_HTC_SVE_1.66.413.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
So the ROM I was using before installing CleanEX was 2.06.51.07.
But that shouldn't be a problem:
Radio Requirements (CleanEX):
As this rom is entirely based off 1.72, you can install any radio you want. I recommend the 2.09 versions
After the install and before the configs my phone HANGS, at startup (HTC logo). I cant reinstall any new ROM either.
WHAT SHOULD I DO??? PLEASE HELP !!!

Ypu can install any ROM.
Boot in bootloader (phone off - press volume down a and power), on tricolor screen is Serial, connect to PC (appears USB) and flash any ROM....

take the battery out..
hold vol- and power on.. should be able to enter boot loader mode..
plug in your computer..
then when u see USB at the buttom.. u should be able to flash ..

jonathanwentzel said:
Hi
Just installed [ROM WWE 21/3/10] NEW CleanEx HQ 1.05 + Others [WM6.5][1.72/2.10][2.5.2012]
but the 1.20 version.
Before I installed I had the HTC original 1.66 ROM
_HTC HD2_RUU_Leo_HTC_SVE_1.66.413.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
So the ROM I was using before installing CleanEX was 2.06.51.07.
But that shouldn't be a problem:
Radio Requirements (CleanEX):
As this rom is entirely based off 1.72, you can install any radio you want. I recommend the 2.09 versions
After the install and before the configs my phone HANGS, at startup (HTC logo). I cant reinstall any new ROM either.
WHAT SHOULD I DO??? PLEASE HELP !!!
Click to expand...
Click to collapse
calm down, please try to explain what you did and what you had done before you flashed - ex. did you have hard-spl? did you flash via SD-card etc.

THANKS
I held down vol. + power and it worked as you said -pew-
Thanks ALOT!
You just saved my day =)

Thank You!!!

[Q] HD2 Doesnt upgrade

Hi,
Today I've tried to install android onto my HD2. After installing 'mgdlr' to my phone it stopped doing upgrades alltogether.
Mgdlr did install correctly but after the reset I only got that white HTC screen.
I know I have to press the power button really long etc etc (I've read the guide thoroughly).
Now, when I try to install anything it doesn't go any further than 0%. Not with any (official) ROM, radio etc.
I've done several hard resets, soft resets and re-installs but nothing gets past 0%.
Does anyone have any clue what happened and why I can't install a ROM and perhaps knows how to fix it?

What are you trying to install? An android rom? Are you going to the flashing mode in magldr? it's option 4 or 5, I think. Magldr was installed successfully? What radio do you have?

I was indeed trying to install an android rom. My radio version was/is 3.14.404.2
I never got to that mode. I've seen it in video's but mine doesn't. I only get that white screen with, in green letters, HTC on it. No matter how long I hold down the power button.
Btw, I said that magdlr installed succesfully because it installed without errors. But I think it's malfunctioning because it obviously isn;t doing what it's supposed to. Re-installing it isn't an option because it hangs at 0%

Did you try task29? might help with your upgrading issues.

VioL3nZ said:
I was indeed trying to install an android rom. My radio version was/is 3.14.404.2
I never got to that mode. I've seen it in video's but mine doesn't. I only get that white screen with, in green letters, HTC on it. No matter how long I hold down the power button.
Btw, I said that magdlr installed succesfully because it installed without errors. But I think it's malfunctioning because it obviously isn;t doing what it's supposed to. Re-installing it isn't an option because it hangs at 0%
Click to expand...
Click to collapse
Which NAND rom did you use?

You mean your radio is 2.14.404.2 right, not 3.14.404.2?
Also what is your SPL, it appears in the tri color screen/bootloader.

Kailkti said:
You mean your radio is 2.14.404.2 right, not 3.14.404.2?
Also what is your SPL, it appears in the tri color screen/bootloader.
Click to expand...
Click to collapse
I think youre right about the radio. It was the standard radio of the latest stock rom. Is there any way to check? My spl is 2.08.0000.
And I was going for rafdroid, not that it matters because I never got close to installing a rom.
Thanks for the replies so far!

VioL3nZ said:
I think youre right about the radio. It was the standard radio of the latest stock rom. Is there any way to check? My spl is 2.08.0000.
And I was going for rafdroid, not that it matters because I never got close to installing a rom.
Thanks for the replies so far!
Click to expand...
Click to collapse
if your spl is 2.08.0000, first, how did you get magldr to instal since it requires hspl? second, if you removed hspl after flashing magldr (hence 2.08.0000 and not 2.08.hspl as it should be), why?
enter bootloader, does it really say 2.08.0000?
You dont have to press the power button for 'really long' only about 5 seconds, so long as its the right 5 seconds, , , start the phone, first splashscreen appears, just as the first splashscreen is about to end, (after around 5/6 seconds) start pressing power, and keep it held till the magldr menu appears.

VioL3nZ said:
I think youre right about the radio. It was the standard radio of the latest stock rom. Is there any way to check? My spl is 2.08.0000.
And I was going for rafdroid, not that it matters because I never got close to installing a rom.
Thanks for the replies so far!
Click to expand...
Click to collapse
Mate, I need more info.
1. Your device version (branded or non branded?)
2. Your rom version before you start anything (stock or custom rom?, if stock, is it version 3.14 (the latest one)?)
3. Version of Android (NAND or SD Android?)
4. Are you planning to have dual boot WP7 and SD ANdroid?
5. Do you have HSPL installed?
The solution will depend on your answer on the above question
Cheers

Ive tried task29 but it does the same as any other update. It just wont let me flash anything, it keeps hanging at 0%

silverwind said:
Mate, I need more info.
1. Your device version (branded or non branded?)
2. Your rom version before you start anything (stock or custom rom?, if stock, is it version 3.14 (the latest one)?)
3. Version of Android (NAND or SD Android?)
4. Are you planning to have dual boot WP7 and SD ANdroid?
5. Do you have HSPL installed?
The solution will depend on your answer on the above question
Cheers
Click to expand...
Click to collapse
1. Its a non branded version
2. It was the latest stock rom
3. I was going for a NAND version
4. I wasnt planning on having a dual boot
5. I have the latest hspl installed (2.08.0000)
Additional info:
When running task 29, first it says From: image version:
To: image version: 2.0.00.00
And when I start the progress bars appear on both my comp and phone.
Afterwards it gave me a communications error.

VioL3nZ said:
1. Its a non branded version
2. It was the latest stock rom
3. I was going for a NAND version
4. I wasnt planning on having a dual boot
5. I have the latest hspl installed (2.08.0000)
Additional info:
When running task 29, first it says From: image version:
To: image version: 2.0.00.00
And when I start the progress bars appear on both my comp and phone.
Afterwards it gave me a communications error.
Click to expand...
Click to collapse
Ok. Let's start from the very beginning.
Find the CORRECT STOCK ROM first. You go to htc website and use your serial number to download the rom. Make sure your downloaded file is not corrupt.
Get micro sd and use PC to format it to fat 32.
Extract the stock rom and find file with the name: RUU_signed.nbh. Rename it to: leoimg.nbh.
Turn off the phone (make sure battery at least 50% capacity), put your micro sd.
Now, press the VOLUME DOWN BUTTON (don't release it), then press POWER ON button at the same time until white screen appear. Now, follow the on screen instruction.
If you succeed, check your spl by going into boot loader screen.
If your spl is other than spl 3.03, you can continue with next process. Installing SPL 3.03 HSPL.
Then, Do task 29. Then, flash radio 2.15.xx. Then install magldr 1.13.
All process can be done while in the boot loader screen.
If you succeed, you will be brought to mgldr screen. Select option no.5 (USB flasher) and press the green phone call button and connect it via USB, now run the NAND ANDROID you choose from your PC. If fails, retry the process from magldr screen and try different USB port. Also, make sure your anti virus, firewall, and Internet is turn off.
Good luck...

Thank you man, it worked!
I did everything you said and my phone is back up and running
Thanks!

VioL3nZ said:
Thank you man, it worked!
I did everything you said and my phone is back up and running
Thanks!
Click to expand...
Click to collapse
Glad you solved it

dear please help me too. i had wm 6.5 and android running on my hd2
i want to installa wp7 but when i want to update my radio it stucks at zero
i tried to put the LEOIMG.nbh and did as u said but it stucks at the white screen and says loading.... only
i cant uninstall hspl nor can i use the stock official rom to make my hd2 as normal.
pls help. thanks in advance

[Q] HD2 Android install - radio flashing question

Hi there
Im struggling with my flashing ... oo er
Im following the guide to flash android to the hd2
I followed step one with hspl and got the We've hacked it message
Next stage is radio flash via Custom RUU
I run the RUU and the install hits 100% (only takes about 30seconds to flash not the ten minutes stated on the dialogue screen on the pc)
the problem is the phone reboots to the white screen with Green HTC logo and freezes at this point. It doesnt run a full reboot.
When I try to reflash the RUU fails.
Could this be a faulty radio image? If so can some one post a link to a mirror for the best radio for the HD2?
I will try the other suggestions of different usb ports etc.
BTW I am using the latest Win mobile Center and have the RUU running as administrater.
Many thanks
Gurry

gurry said:
Hi there
Im struggling with my flashing ... oo er
Im following the guide to flash android to the hd2
I followed step one with hspl and got the We've hacked it message
Next stage is radio flash via Custom RUU
I run the RUU and the install hits 100% (only takes about 30seconds to flash not the ten minutes stated on the dialogue screen on the pc)
the problem is the phone reboots to the white screen with Green HTC logo and freezes at this point. It doesnt run a full reboot.
When I try to reflash the RUU fails.
Could this be a faulty radio image? If so can some one post a link to a mirror for the best radio for the HD2?
I will try the other suggestions of different usb ports etc.
BTW I am using the latest Win mobile Center and have the RUU running as administrater.
Many thanks
Gurry
Click to expand...
Click to collapse
Here's the radio you want dude:
http://www.multiupload.com/QP0IWGY42F
reply back if having problems or pm me.
matt

Hmmm, few questions........
What kind of HD2 do you have.. US, European??
What radio do you currently have?
What radio are you trying to flash?
Can you get to bootloader (3 coloured screen) by turning on while holding vol. down?

gurry said:
Hi there
Im struggling with my flashing ... oo er
Im following the guide to flash android to the hd2
Click to expand...
Click to collapse
Can you enter Bootloader Mode and verify that your HardSPL install completed successfully and that you now have SPL-2.08.HSPL on the second line.
If that is ok then try flashing the Radio using the SD Card method as stated in my flashing guide (renaming the nbh file to LEOIMG.nbh copy to the root of your storage card and reboot into bootloader mode).
Mark.

Im confused now - I did the update again after flashing a stock rom via the sd card method. The radio updated and the rom started the self set up sequence.
I removed the battery - re ran hspl loaded fine,
confirmed its installed rebooted fine to rom rom.
powered off back into boot loader ran custom ruu - the progress bar ran to 100%. Phone rebooted and again is stuck at the green htc logo on the white backgroud with no radio details in the bottom left hand corner?
I re downloaded the file for the radio so ts wasnt corrupted.
Ill try the leoimg.nbh method see if that works.
WELL Thanks to the replies and starting AGAIN from scratch and updating the radio the sd card way Ive gotten it all working.
thanks for all the info.
Sometimes a little patience and a fresh pair of eyes so to speak - works wonders
Gurry

What radio? Cos the symptoms sound like what happens when you load a 51 radio with a 576 enabled rom.... ie it hangs at RGD info screen without any RGD info showing.