Hi guys, I really need your help, I have a QTEK 9100 and I cant use usb connections like sync etc so I use blueetooth to sync, but I dont know if its possible to flash it through bluetooth . Can anyone help ?
MY usb is not working on the QTEK it needs to be fixed on a store I guess.
When I power on with camer button I dont have the USB information on it.
Put simply, no, you cannot.
Read the linky in my siggy and it will explain all to you. It is a long and very detailed thread about the woes of a damaged usb port and what can and can't be done.
Related
Please help me solve infrared problem with my device since i am not able to sync using IrDA. This is a problem that I cannot resolve and I wish that somebody could really help me and tell me the possible resolutions taking into consideration that I dont have any keyboard or any external hardware attatched to my pocket pc So please I would appreciate Any assistance.
Zimo
I have similar problem with AT&T PPC2002 (XDA developers Special Edition ROM v1.2). The phone was bought with this ROM, so I didn’t try with other versions.
When I run ‘infrared receive’ application or try to beam any file my phone simply hung till I soft-reset it. It may be the conflict with other programs but I not sure. How to check who else uses IRDA and how to remove those programs/conflicts?
Help please
the idea is that can any body from the developer team help us ?
Haloo zimo,the main idea here is that you should make sure of
1)the Ir port on you PC or lap top is working as some IR ports does not work with all devices like Y140 "SigmaY140"
2)You should start the active sync from the device not the pc
I hope my experince with your problem give you help ,if you need more help you can contact me (I live in cairo too)
I am still trying to find a way to assign a "virtual" port to the irda, I am trying to get tomtom2 working with an infrared gps connection but if I choose infrared port it locks the machine up, beams is unchecked, tomtom will work on any ipaq with tomtom irda after choosing the "generic irda" port shown in gps settings. Any help appreciated.
i good thing to try is to see if you can beam stuff to the pc
when i want to connect i
choose the Infrared receive
in programs then i place the xda about
10cm from the infrered port on the
pc
then i go back to the today of cause leaving the
infrared receive running
and i try to beam and it works
then i open activ sync and choose connect using infrared
and ....
I have the very current asian rom. But am still having the same problems with IrDA connections. The device would refuse any transmission from the pc running XPpro. Don't know why. After installing 'Peacemaker', it worked seamlessly.
The bugging question. Why does it need an aftermarket software to run on the device where the IrDA drivers comes stock standard with microsoft?
The best part is, my old nokia7650's IrDA works flawlessly with my pc without any additional software.
IrDa = Forsaken child in this high powered enviroment?
My problem is solved
I have sent my device to my local dealer and it was repaired with my waranty certificate. In fact it was found that the IR port of my XDA II was faulty , and they replaced it !
I do not think its the IrDA being broken. Much more like the s/w driver's fault as I could get it to work with Peacemaker s/w.
Though I do not use it often, it still gets on my nerve knowing that there's a flaw in the upgraded rom. Have to wait for another 6mths before I could return to my home country and send it for a checkup. Sigh....
I could not get my xda 2 to accept beamed file from my xda, if I choose receive from ppc200/hpc on xda 2 under setting/beams, it works properly but gives a failed error even though the contact/file is copied.
Sorry if this is really basic, but my computer no longer recognises when I put my Himalaya into the cradle. I have another Himalaya here, and it recognises that no problem with the same cradle.
Could someone help me with what I should be looking for? I don't get why it should work with one but not with the other, and why it should suddenly change like this.
Am still on the original 2003 OS.
if hardreset dont fix it then maybe it's the connector in the buttom of the himalaya rather then the cradle which cause the problems
Problem is I don't want to hard reset because then I lose all my information and if I can't sync it back on then I really am screwed.
Guess I'll have to see if I can Bluetooth it on maybe.
hi all!
just got an o2 xda ii aka himalaya from my bro, but its a semi faulty set, the usb sync port is faulty, thats mean i cant sync by plugging the usb cable.
but all i know the software upgrade need usb connection, so is there anyway to let me use sd card to flash my himalaya to wm5 or wm6?
hope you all can help me this.
thanks in advance.
regards.
http://forum.xda-developers.com/showthread.php?t=355832
Hello
I'm looking for some help and advice with a problem I have with an i-mate xda2 and trying to communicate with my desktop using windows xp. Like many other owners of the xda2 the bottom connector has become completely disconnected and as a result I have been trying to set up using Activesync over Biuetooth. I have followed various tutorials on how to make this connection without sucess. I recently did a hard reset on the xda2(WM2005) and now find I do not have the options for setting up Bluetooth that I had before the hard reset-for example I cannot select serial port option-I just have the hands-free option! It may be that I need to use the cradle/USB connection before I can set up activesync over Bluetooth.
Note -the desktop and xda2 recognise each other but not using activesync.
Any comments/advice would be appreciated.
Regards
lent
http://www.microsoft.com/windowsmobile/help/pocketpc/activesync.mspx
That link might help you.
However, I thought they had disabled wireless access completely with Activesync as a security measure?
Anyway, someone can correct me if I am wrong. I have never done it over bluetooth personally.
Hope this helps.
Thanks for your reply but I'm afraid it did not help. I think my problem stems from the fact that I did a hard reset after the usb cable socket on my PPC broke off and this is stopping me getting the correct Bluetooth settings.
Regards
lent
Hi to you all! Please provide me a schematic of this type of cable. I ordered one from a site and it won't work. I'd like to try to upgrade to WM6.1 and I don't have a working cable. Please give me at least a pinout for this PDA. The one that's on pinouts.ru - I don't think it's good for this model.
Thanks a lot!
No answer yet? I got another USB cable from provider, which is also not good, even though it has "usb detect" and USB data + and USB data - pins present.. It just says " unrecognized usb device" please! I want to upgrade to Windows mobile 6.1, that's all I wanna do. thanks a lot to anybody who will answer.
Why do you think that there is something wrong with the cable?
It's quite possible that connector on iPAQ is bad.
Spiaatie said:
Why do you think that there is something wrong with the cable?
It's quite possible that connector on iPAQ is bad.
Click to expand...
Click to collapse
Hi!
It turned out I was doing something wrong. The phone needed to be in bootloader mode so that the drivers provided into this forum to work properly. Thus, I can confirm that the schematics for IPAQ from pinouts.ru works just fine at least for the USB connection part. As for drivers, they are posted here in this forum.
I also attached an image with the response of that cmd command.
Thanx to You all!
Keyboard
Hi again! Anybody has a fix for keyboard issue? Key problem like: Delete function instead Enter and such... Please help!
Thanx!