Hi,
I tried some ROM from this website to change my wizard to wm6.
When the RUU finishes at 100procent my device restarts and normally it should be flashed. But mine always restarts the original rom. On the pc it says that the procedure has finished succesfully.
Dont know if this has anything to do with locking, but I used the lokiwiz to unlock my device.
Anyody an idea to solve this?
Grtz
Annihil8
your wizard is still CID locked...
try it again ... follow the instructions ... read carefully the messages when running lokiwiz ... could be misleading sometimes at a first glance ...
I'll give it another try. But the lokiwiz keeps telling me that the device is unlocked. It doesn't even give me an error like you get with the AKU2.
error:itwritedisk-an internal error occurred
So that is why I think that should be ok...
you may want to use the WST tool to check the CID status ... you find it on this forum. don't have the link on hand right now ...
Related
Hello,
Well to explain my problem. I had the RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID flashed onto my O2 XDA Neo. No problems, but sometimes I couldn't go back to desktop because "programms" didn't want to close. So I went to look for a dutch firmware. I found one and tried it. It didn't work, but my XDA Neo was already at 1% and didn't go further. So I pulled the cable out of the telephone. Now it doens't pass the red, green, blue screen when starting the phone. Hard reset doens't help eather. Wenn I connect it to the computer, activesync says "not connected".
On the screen it says:
RUU
IPL 2.15.0001
SPL 2.15.0001
Please help me out, because I really don't know what to do anymore
Encountered your case before while trying to downgrade with no success.
I suggest you try to turn back to dopod wwe rom and install it again before further attempts to brick your device.
Active sync tells it's not connected, that's normal because you connect a device which has no rom now.
You should see "USB" at the bottom of the screen once connecting to PC. Then start the rom update.
It will try to discover what's in your pda and will report you "nothing", which is logic. Click update and go. It should proceed...
Good luck.
g3k said:
Encountered your case before while trying to downgrade with no success.
I suggest you try to turn back to dopod wwe rom and install it again before further attempts to brick your device.
Active sync tells it's not connected, that's normal because you connect a device which has no rom now.
You should see "USB" at the bottom of the screen once connecting to PC. Then start the rom update.
It will try to discover what's in your pda and will report you "nothing", which is logic. Click update and go. It should proceed...
Good luck.
Click to expand...
Click to collapse
Thank you so much! I reflashed my old rom, and the device works fine again. But is it not possible to run an older rom? I would like to have the dutch version.
If your device is Sim unlocked, you may try the famous specific rom availIable at:
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=437&PN=1&TPN=1
This rom is for downgrading in a first step and cid unlocking in the second step exclusively and not for continous use . Once these two task are done, you can install any ROM you want.
Reminder: You can not install other language without CID unlocking.
g3k said:
Reminder: You can not install other language without CID unlocking.
Click to expand...
Click to collapse
It is not true. You can install any language ROM using NoVendorID patched reflashing utility.
Yes and no!
If the ROM to write is never "patched rom update utility" will bypass the CID check step and continue to install.
But it the new rom is older (ie 2.09 to write over 2.13) problems start there and you get an error in most cases. In that case we need to downgrade.
I've faced and practiced both cases.
Thanks for details...
I have been trying to unlock my 8125 I all ready sim unlocked it but every time I try to CID unlock it it saids error.
Also when that was fininshed the were 2 new bim folders one was called "cidunlocked" and the other one was "lock_backup" does this mean that it it unlocked?
More info on the actual error would help. lokiwiz.bat would create the files in the beginning; so presence of the files does not indicate success.
Are you sure that you followed all the instructions in the stick threads?
kernelguy
Yes I followed all the instructions
I unlocked my sim but the cid is the only one that I cant unlock
it saids error and then some numbers
then my 8125 just restarts
did you downgrade your rom prior to unlocking? higher spl/ipl's usually have more problems unlocking...
NO I havent every time i try to it said error and shut dount
i tried it with the button rom
i posted this in another thread but no one replied so thought this one mite be more busy.
i am new to all this and i stupidly went running into things and tryed to ROM upgrade my t-mobile MDA Vario II (HERM300), not knowing i had to CID unlock first, it has broke! when i boot it up i can not get passed the t-mobile splash screen and it also flashes "no-gsm". i have read many suggestions on fixing this but i have had no luck. i can get into the boot screen however and get the red green and blue stripes.
i have IPL 1.01 and SPL 1.04.
it will allow me to connect to my PC with USB but active-sync does not recognize i have connected the phone.
please help someone. i just need a way i can get this thing working again. if i could just get the phone into a state of use again that would be good.
please help, at least let me know if Ive got a chance of repairing it
i believe if you can get it in to bootloader mode you can flash back to original rom and start over
i thought that to but when i tryed the t-mobile rom it said "connection error" and also said it should be connected through active sync. but then agen it mite of been the wrong t-mobile rom but im sure it was for the vario ii. do you have a link to the one i should try please?
i downloaded the official UK shiping rom from t-mobile site and upgrading now through bootloader. will report on what happens.....
nope, keep getting "device not responding" or "connection error". any other sugestions?
i looked on here http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick and it says that i have to "Flash any type2 radio in NBF format. If that doesn’t work, flash the radio using HERMflasher" please could someone tell me how to do this, if this is the solution to my problem or if there is another way around this. thanks.
please help someone i realy need to fix my phone
Cool down....
what's ur radio version?
Also have u read this? http://wiki.xda-developers.com/index.php?pagename=Hermes_SimUnlock - TRY THIS FIRST, before attempting anything else...
ok, i have tryed that "sim and cid unlocker" and i beleve that you have to connect with active-sync because when i tryed it when i was in boot loader it said that it was not connected but it was. i will get my radio version now.
EDIT: my radio version is: 0107
EDIT2: also, here are some other numbers (which i dont know what they mean but mite be needed) which apear on boot-up t-mobile splash screen, in red letters/numers, just before "no-gsm" flashes on:
M 05
S 04
B 06
D 1.21
If you can get into the Bootloader (Rainbow Screen) you should be okay (Not a Brick)
Go download a Radio Rom from the wiki.
Enter Bootloader first, then connect to PC. Then flash the Radio Rom.
Edit, Also Read: http://forum.xda -developers.com /showthread.php?t=296722
berdinkerdickle said:
If you can get into the Bootloader (Rainbow Screen) you should be okay (Not a Brick)
Go download a Radio Rom from the wiki.
Enter Bootloader first, then connect to PC. Then flash the Radio Rom.
Edit, Also Read: http://forum.xda -developers.com /showthread.php?t=296722
Click to expand...
Click to collapse
ok, ill try that, does it need to be a perticular radio because im not super CID? for some reason the link will not work.
oooooo, it seems to be workin!!!!!!!!! im at...16%. ill report what happens after update finished
yes!!! it worked!! thank you very very much for your help!!!
Hello,
I have spv m650 branded with orange. Have successfully removed simlock, but cid-lock removing with "Wizard Service Tool" failed.
So I was trying to bypass CID lock with USPL.
However I thing something went wrong.
I started start_uspl.exe and followed steps with documentation.
Phone rebooted with blank (black) screen. (ok so far)
According to info at wizard active sync should be connected (green) while flashing. However my phone didn't show it's connected while boot mode.
I've waited about 10mins and decided to continue. After next steps wizard show info that now will start flashing and it take about 10mins. But it took only about 5 seconds... After that wizard showed that finished. And my phone started with normal mode.
So I'm totally unsure if this succeded or not, and since I don't want to brick my phone I'm a bit scared about flashing my system - because I'm not sure if CID is bypassed/removed or not.
I'm searching forum, but I can't find any info how to validate if process is successed or not.
Current SPL version is 1.11.0000 (Unfortunetly haven't checked it before flashing) So I don't know if there is any change or not.
So anyone could please told me if can I safely flash new rom to my phone? Or sth went wrong with USPL and CID-LOCK is still active?
Regards
IF SPL is 1.11.000' then is CID unlock
i must admit i am a newbee... i read the thread thoroughly and downloaded the programs necessary to flash my HTC Touch P3452. I downloaded Onyx Ultimate and unzipped. connected my phone to activesync and ran the RUU. I followed the steps and till i reached update ROM, the version in phone was 2.20.0000 and new is IPL USPL 2.26. then i cliked update and the progress bar appeared on my PC. then after a minute, i gor an error (266) stating that updater cud not connect to the p[hone and asked me to check connection. i didnot do anything. after a while, i noticed a white screen on my phone and progress bar stuck to 0%. now my phone is dead.
can anyone help me
katbasav
Read this http://forum.xda-developers.com/showthread.php?t=406721, something I hope will help you.
Good luck
thanks.. but did not help me... i tried as per the sticky given in begenning. nothing worked..
I doubt that you tried all the possibilities mentioned in post 7 from the link I gave you before, but if you did and nothing worked then I can't see what will...Sorry mate but before you call it dead, try a 2nd time and 3rd,
Good luck.
katbasav said:
thanks.. but did not help me... i tried as per the sticky given in begenning. nothing worked..
Click to expand...
Click to collapse
tito12 said:
I doubt that you tried all the possibilities mentioned in post 7 from the link I gave you before, but if you did and nothing worked then I can't see what will...Sorry mate but before you call it dead, try a 2nd time and 3rd,
Good luck.
Click to expand...
Click to collapse
katbasav said:
the version in phone was 2.20.0000 and new is IPL USPL 2.26.
Click to expand...
Click to collapse
If you are able to enter the bootloader tricolor screen and you see that you have indeed USPL 2.26 installed, then you should be able to flash anything you want!
Fully charge your pda
Remove your memory card and SIM card
Connect via usb, enter bootloader and flash the Rom you want with the RomUpdateUtility.exe
WARNING
Since you don't have HardSPL but USPL be extra careful NOT to flash a Rom that includes SPL cause then your device mightwill get CID locked.
If the above steps don't get you with a working device, then better check if the USPL really worked.
A safe way to find out if your CID unlocking worked is following this method & check the line:
Code:
g_cKeyCardSecurityLevel = ?
;If ?=0 => Touch=CID_Unlocked => Able to flash any ROM or Radio Update through Bootloader
;If ?=FF => Touch=CID_Locked => Try CID_Unlocking again BEFORE flashing anything
Click to expand...
Click to collapse
Regards!
My mobile is HTC Touch P3450. I downloaded Onyx Ultimate and unzipped. connected my phone to activesync and ran the RUU. I followed the steps and till i reached update ROM & installed its working, but i tried RUU_Elf_HTC_Asia_HK_WWE_1.15.721.3B_4.1.13.46_02.97.90_BLUE_Ship.exe rom but my mobile is showing "smart mobility" and then mobile is off. Pls. kindly help me.
i tried CID unloking also, but not working
Narashimha