I have been trying to unlock my 8125 I all ready sim unlocked it but every time I try to CID unlock it it saids error.
Also when that was fininshed the were 2 new bim folders one was called "cidunlocked" and the other one was "lock_backup" does this mean that it it unlocked?
More info on the actual error would help. lokiwiz.bat would create the files in the beginning; so presence of the files does not indicate success.
Are you sure that you followed all the instructions in the stick threads?
kernelguy
Yes I followed all the instructions
I unlocked my sim but the cid is the only one that I cant unlock
it saids error and then some numbers
then my 8125 just restarts
did you downgrade your rom prior to unlocking? higher spl/ipl's usually have more problems unlocking...
NO I havent every time i try to it said error and shut dount
i tried it with the button rom
Related
Hi,
I have a MDA Vario device which I would like to upgrade to the newest QTEK-rom. So, I have to CID-unlock the device which is not working out as it should be.
I already got the sim-unlock-code with lokiwiz03a after I manually copy-ed the enablerapi.cab to my phone.
I use lokiwiz02a for the CID-unlock but this fails with some kind of interal error and the device reboots, I have a screenshot of the error just before it reboots, it's here: http://www.bulls-with-spirit.nl/error.jpg
I hope you guys ca help me out with this!
Hi,
I tried some ROM from this website to change my wizard to wm6.
When the RUU finishes at 100procent my device restarts and normally it should be flashed. But mine always restarts the original rom. On the pc it says that the procedure has finished succesfully.
Dont know if this has anything to do with locking, but I used the lokiwiz to unlock my device.
Anyody an idea to solve this?
Grtz
Annihil8
your wizard is still CID locked...
try it again ... follow the instructions ... read carefully the messages when running lokiwiz ... could be misleading sometimes at a first glance ...
I'll give it another try. But the lokiwiz keeps telling me that the device is unlocked. It doesn't even give me an error like you get with the AKU2.
error:itwritedisk-an internal error occurred
So that is why I think that should be ok...
you may want to use the WST tool to check the CID status ... you find it on this forum. don't have the link on hand right now ...
I reset my 8125 and supposedly relocked the CID so i could send it back to cingular
is there any way to check if it is CID locked so i can retain my warranty?
You can check it using the CID actions button in Wizard Service Tools. From what I've read on here though, the manufacturer doesn't usually check whether or not it's still CID locked anyway.
I checked it, but it shows its still unlocked. I tried using the Lokiwiz backup to restore it and it didn't work. Any ideas on how to get my CID back?
Hello. I have a problem...I have the SFR S300+ from France and I want to use it in my country. I did everything written in this thread --> http://forum.xda-developers.com/showthread.php?t=293957 but my PPC is not sim-unlocked. When I start Trin_Unlock_v1.exe from my phone and check "SIM Unlock" the program starts and then appear a screen "Success! Device SIM/Network lock removed" but after that when I start the PPC again there is another screen "SIM Lock" that tells me that I have tried xx times and I have to wait until timeout...
If anybody know how to remove the sim-lock please tell me... I'm trying for a month and I can't find a solution for this problem.
I am with WM6 if it's important
Thanks in advance and Merry Christmas to all
I had to install an old radio rom before unlocking my s300+ (i had to launch the application while using this old rom), don't know if it is necessary though now.
Quote "This is a patched radio ROM that can be used to remove the Operator
SIM lock and CID lock from HTC Trinity based telephones."
I trckon you must run the RomUpdateUtility located in the RUU file in order to flash your device with another radio rom, then you launch the unlocker(sim and cid un locker) . Try with another sim card to see if the operation was successful and if it is the case, flash your device with a new radio rom. Hope i helped (i had the same problem)
I tried with a few radio roms but without success. Can you tell me please with which radio rom have you unlocked your Trinity I am with 1.46.00.11 and the phone is locked
I have the same problem ... I downgraded radio to 1.16.00.00 patched version, executed unlocker but when i reboot ( i tried hard and soft reset ) the SIM was locked yet
any info about unlocked process ???? any reported problem with M700 from Orange ????
Yesss! I did it! It's unlocked I started the "AUTO_Unlock_v1.bat" file and after it finished the radio rom was 1.16...I put the sim card and the phone was still locked... Then I decided to do it in the second way... with the "Trin_Unlock_v1.exe" file transefered on my phone.. But this time I put the file not on the phone memory but on the memory card. When I started the application and it finishes I switched the phone off for a while...(10-15sec.) and then I put the sim card. When I started the phone there was no screen asking me to put a password.
Hello,
I have spv m650 branded with orange. Have successfully removed simlock, but cid-lock removing with "Wizard Service Tool" failed.
So I was trying to bypass CID lock with USPL.
However I thing something went wrong.
I started start_uspl.exe and followed steps with documentation.
Phone rebooted with blank (black) screen. (ok so far)
According to info at wizard active sync should be connected (green) while flashing. However my phone didn't show it's connected while boot mode.
I've waited about 10mins and decided to continue. After next steps wizard show info that now will start flashing and it take about 10mins. But it took only about 5 seconds... After that wizard showed that finished. And my phone started with normal mode.
So I'm totally unsure if this succeded or not, and since I don't want to brick my phone I'm a bit scared about flashing my system - because I'm not sure if CID is bypassed/removed or not.
I'm searching forum, but I can't find any info how to validate if process is successed or not.
Current SPL version is 1.11.0000 (Unfortunetly haven't checked it before flashing) So I don't know if there is any change or not.
So anyone could please told me if can I safely flash new rom to my phone? Or sth went wrong with USPL and CID-LOCK is still active?
Regards
IF SPL is 1.11.000' then is CID unlock