Related
HI all,
I'm desperate...
I recently bought an 02 Orbit that was supposed to be unlocked.
So I downloaded PDAMobiz_Dopod_P800W_AKU301_v1.1.0_Lite.exe, unpacked it and double clicked on UpgradeRom_P800W.bat
A dos installation routine started, then I performed a hard reset by pressing the softkeys + stylus reset.
and now I"m stuck on the O2 logo, with some red informations written :
IPL 1.25.0001
SPL 1.25.0000
GSM 02.67.90
OS 1.28.0.0
but nothing else, the device doesn't boot :-(
I'm completely desperate... I had my Orbit working 1h only and now I still have my eyes to cry.
I've tried to install another ROM like ART_HTCWWE_11240501_026790_WWE_Ship, but when I launch ROMUpdateUtility.exe it says that no device is connected....
I tried to enter the bootloader but I don't understand how I could do that (by the way what do you guys mean by the record button? where is it?)
Could someone explain me how I can recover my crashed device please ?
Thanks in advance
ok I've found the record button and managed to enter the bootloader (red-green-blue screen right?). But it doesn't help. My device is not recognise by my PC anymore, no connection.
The problem is that I didn't make the procedure on IMEICHECK because the vendor said my Orbit was already unlocked. I know, I'm stupid, I should have....
Anyway, now I've my 30€ UNL file,
I've edited a ROM with the hex program, I've change "BsaD5SeoA" with "IMEICHECK save exe file" (I told you I'm stupid, or I didn't exactly understood what you mean, because I don't have any IMEICHECK.exe file)
I tried to launch a ROM upgrade but my device still not be recognised by my computer, even in bootloader mode.
Same **** when I try to launch the C3v1Unlock, it says no device connected.
Please, if you have anything to help me......
After i read this THREAD who explain how to repair my problem ...But it dosent work for me
When i want to flash it, it tell me :
INVALID MODEL ID ,with : RUU_Artemis_DOPODASIA_WWE_LOVE_1.28.717.1_INFINEon gsm4.1.13.30_02.69.90_Cmp_Ship_R.exe
INVALID UPDATE TOLL ,with : _ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe
And after have made the TUTO !
Click to expand...
Click to collapse
I saw this post on an other thread... I am having the same problem... I bought artemis from ebay and the seller told me that it was unlocked... But i can't flash it with these ROMs... Did you find a solution? Is it really unlocked?
By the way when the window that tells me "INVALID MODEL ID" shows up at the bottom and to the right of the window there is i big number... Do you know what this is?
Same problem here
I have THE SAME problemhere. The same message on the boot screen. It seems that we are not able to use our XDA ORBIT ;( any more
At least we can download oreginal XDA Orbit english or German ROM OR if someone write RUU for Xda Orbit. Than would be easy - you just go to boot loader and you start your RUU, or easily put .NBH file to your micro SD and flash it from micro SD.Too bad I can just cry over my Xda Orbit. PLEEEASSEEE HELPPP
I also heard that FTP ROM site is going down ---- XDA GENOCIDE!!! What ARE you doing people!
Try the orbit ROM on ftp if it is still there
When a seller says a device is unlocked, all they mean is that you can use any sim card of your choice. To be able to flash another rom you need to CID unlock it. For the Orbit/Artemis family we only have imeicheck selling the program for unlocking cid.
My advice would be to look for the orbit rom on ftp. If it does not work, check with imeicheck if their program works when device is in bootloader mode, and pay them and download the specific application for your device. Good luck
I had a problem with my Orbit when I tried to change the Rom to the PDAMobiz one. I ended up recovering it by...
1 - Hard Reseting it.
2 - Connecting it up to the PC then running C3v2Unlock note v2 from the the IMEICheck site. This made the screen on the Orbit go bright white.
3 - Downloading the the Rom listed in this thread and following the instructions with in the same
It means that my Orbit is seen as a HTC P3300 but it feels quicker. You do need the UNL file from IMEICheck to keep it unlocked. But it worked for me.
Yes I tried everything in bootloader mode,
the C3V2 Unlock program launched but after detecting the device, it says my device is corrupted with a kind message "[probably by your fault]" ;-)
So guys, everyone who's trying to upgrade : CID UNLOCK YOUR PHONE BEFORE DOING ANYTHING, and carefully read the (excellent) tuto.
FYI, here's the discussion I had with Imeichek guys :
------------------------------------------------------------
Hi,
I'm a little desperate and I hope you'll be able to help me...
I recently bought an 02 Orbit that was supposed to be unlocked (I didn't know the difference between SIM lock and CID lock)
I understood, too late, that I should have ask for my UNL file prior to do this stupid "direct upgrade" I did...
Here are the facts :
1- I didn't follow the instructions found on http://forum.xda-developers.com that explained how to order the UNL file and Unlock the device unlocked
2- I downloaded a new ROM (PDAMobiz_Dopod_P800W_AKU301_v1.1.0_Lite.exe)
3- I unpacked it and double-clicked on UpgradeRom_P800W.bat
4- A dos installation routine the started, then when asked, I performed a hard reset by pressing the softkeys + stylus reset.
now I"m stuck on the O2 logo, with some red informations written :
IPL 1.25.0001
SPL 1.25.0000
GSM 02.67.90
OS 1.28.0.0
but nothing else, the device don't go further
I've tried to install another ROM like ART_HTCWWE_11240501_026790_WWE_Ship, but when I launch ROMUpdateUtility.exe it says that no device connected.
I managed to enter the bootloader but my device is still not be recognised by my computer (not connected message). I tried your C3v2Unlock tool but it says the same : NOT CONNECTED
So please, if you have any information or procedure I could try to fix my device, I would really, really, appreciate, especially after my 30€ contribution ;-)
Best regards
---------------------------------------
2007/2/17, [email protected] <[email protected]>:
Hello,
NO PANIC. You can fix the device. You have to find the CORRECT / a matching ROM for your device. For this you have to know what ORIGINAL phone it is (O2 Xda Orbit UK?)
Tell us what device it is and we try to assist you in fixing it.
Regards,
IMEI-CHECK Team
-----------------------------------------------
Thanks for your fast answer!
Yes it's an original phone, a brand new O2 Xda ORBIT, in box
Regards
Thomas
----------------------------------------------
Hello,
the language is important. Is it UK version?
Regards,
IMEI-CHECK Team
-----------------------------------------------
yes it's a UK version
-----------------------------------------------
Hello,
hmm, sorry to tell you but for the UK version there is no official ROM update available right now.
All you can to do fix it NOW is to send it to repair (service center).
For our customers we offer to fix the device for free (you only have to pay for shipping costs in both directions). We are located next to Glasgow UK. In case you are interested let us know.
Regards,
IMEI-CHECK Team
-------------------------------------------------
Ok,
I guess I don't have any other choice.
Wich ROM will you install if there's no official O2 Rom ?
What is the procedure, what's your adress, and how much will cost the return ?
Thanks a lot
Thomas
-----------------------------------------------------
Hello,
- we can install any ROM of your choice (it only needs to exist)
- we also will unlock the device and you can install ANY ROM you life afterwards
- the device needs to be opnened to use some special hardware to access the flash chip directly
- shipping back to (UK/EU) with INSURED Royal Mail is apx. (7 GBP/15GBP) depends where you are located.
Regards,
IMEI-CHECK Team
---------------------------------------------------------
ok thank you,
but will you be able to flash an O2 Xda Orbit with the french ROM that comes with the (Artemis) HTC P3300 sold in France ? this is exactly the same machine.
Regards
---------------------------------------------------------
Hello,
yes we can flash ANY available ROM to it.
Regards,
IMEI-CHECK Team
----------------------------------------------------------
here I am,
I guess there is nothing else to do.
First I want to thank you all for trying to help, then thanks to IMeicheck, they replied very fast and found a solution, even if I won't hae my Orbit for several weeks.
2- I downloaded a new ROM (PDAMobiz_Dopod_P800W_AKU301_v1.1.0_Lite.exe)
3- I unpacked it and double-clicked on UpgradeRom_P800W.bat
Click to expand...
Click to collapse
Maybe you should not have unpacked the file Just clicking on the file icon starts the procedure, which does some checks before actual upgrade starts.
I have switched so many times between the pdamobiz roms and the HTC one so many times I've even lost count
It's been easy for you... because your phone was CID unlocked ;-)
Well i had HTC ROM and now i have pdamobiz... That means that my artemis is cid unlocked???
my orbit is stuck on boot screen exactly as manples'. i tried to flash pdamobiz custom ROM. i can enter bootloader. can u tell me plz to what change "BsaD5SeoA" with "IMEICHECK save exe file" from imeicheck i've got c3v2unlock.exe & unl file. i tried flash it tru sd card-nothing. I've got o2orebit (ARTE200) please hlp
Psrejic, does your Orbit work again? I have the same problem. Can't get passed the splash screen because I flashed it with the PDAmobiz rom.
Only way to go is thrue bootloader. Did the SD flash work for you?
Same problem here Waiting for any solution ...
Only solution so far is imei-check service, witch will cost you: Price of sending to them: (UK) Then 20£+15£(aprox) to pay them for unlocking and repairing + sending back.
That's what I've done,
I received an email where they confirmed the reception of my device and that they flashed it with a new Rom. My device is supposed to work, it's great ! can't wait to try it.
Hi manples ...
You send it to imei-chek?
My Orbit works again! ... but not with a software solution.
I returned the phone to the O2 shop and they gave me a new one immediately. I didn't mention my PDAmobiz Rom upgrade offcourse.
It isn't the nicest way to deal with the problem, but when o2 flashes the rom on the phone they can sell it again.
Then I did the Imei-check solution. Worked and flashed the dopod rom on it.
hi to all yesterday I was your siimilar problem (I've try to install teh powermap rom...) so my Orbit O2 (original german rom) still only in boot screen, today I've try to install this magic rom:
art_tmouk_11311001_024990_wwe_ship.rar
I've press the comm manager button + power button + soft reset and my orbit it's enter in bootmanager mode so, i've install the TMobile UK rom (I was the O2 german rom...)
only in this mode my orbit work again.
bye
xda orbit stuck
i flashed my xda o2 orbir german rom with PDAMobiz_Dopod_P800W_AKU301_v1.1.2 and now it wont start at all i tryed to enter bootloader but i cant ( voice key and reset ) its stuck at o2 logo and :
IPL 3.04.0001
SPL 3.04.0000
GSM 02.00.90
OS 1.20.0.0
DOSE ANYBODY have a solution ? please help me !
keep up the good work ! thanks
ive got a htp 3300 from movistar spain and i allready got it unlocked, yesterday i put the wm6 english on it and today y tried to put
PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap, now
i can see only the white htc screen
IPL 3.007.001
SPL 3.07.0000
GSM 02.69.90
OS 1.28.0.0
the phone dont start anymore
y need helpe please
Can you get in to the bootloader?
If you do then you can put an original rom back. If you don't then send it to the service.
An unlocked device is out of warranty so be prepared to pay for the service.
Go to wiki of Artemis there you can find the method to get in to the bootloader.
Goof luck! << you need that.
you meen push the record button and reset in the same time???
i tried this befor but never go in bootloader modus maybe i make something wrong pleas help me
As of this http://forum.xda-developers.com/showthread.php?t=308242#1 threath of meschle states your device is a brik.
I'm sorry to tell you that.
meschle said:
Do Not flash your Artemis with a different carrier/cooked Rom without cid unlocking
--------------------------------------------------------------------------------
Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid = country id i.e. locked to that country/language/vendor
cid unlock for the artemis is here with USPL http://forum.xda-developers.com/showthread.php?t=311403 (thanks pof)
or here http://www.imei-check.com/c3unlock.php (costs though)
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112...0_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219...0_WWE_SHIP.rar
O2 Orbit WM5 WWE factory rom downloadable here http://rapidshare.com/files/41574866/Arteimg.nbh
O2 Orbit WM6 WWE factory rom downloadable here http://rapidshare.com/files/46377862....90_Shi p.exe
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
Click to expand...
Click to collapse
movilstore said:
ive got a htp 3300 from movistar spain and i allready got it unlocked, yesterday i put the wm6 english on it and today y tried to put
PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap, now
i can see only the white htc screen
IPL 3.007.001
SPL 3.07.0000
GSM 02.69.90
OS 1.28.0.0
the phone dont start anymore
y need helpe please
Click to expand...
Click to collapse
i had the same problem and took me 3 days to fix it. so maybe this will work for you too !
first take out the battery for 30 min then push the reset button and put the battery back and turn on the device. if this not working. try to start bootloader by pressing and holding the record button and on/off button and push the reset butoon in the same time but keep pressing the record button and on/off button till a colored screen shows up??? sometimes it doesn't appear at the first time so just keep trying .
if you have bootloader you can reflash a rom. but you need to format your memorystick first to fat on your pc then put the image rom (nbh file) and rename it to Arteimg.nbh !! i used OrbitO2UK image.
Hi,
Does anyone knows a method for repairing my old P3300.
The problem is i've tried to upgrade to wm6 and something went wrong,
ATM i only have a screen with the Tmobile logo,
I can open the bootloader, but if i load the bootloader and try to run the official rom update i get the error 122 cannot connect to device.
If i'm in the bootloader and try to start mtty, it all goes as it is supposed to go
I can see the phone in mtty and can get it into flash mode when i enter the bootloader password.
Even when the phone is in this mode the official upgrade won't see the device.
So my question: is there a way to flash/upgrade the rom from mtty?
If yes what are the commands for it in mtty.
If not does anybody know an other solution?
Btw it's a sim unlocked and Cid unlocked P3300 From the Netherlands Tmobile.
IPL 1.13.0001
SPL 1.13.0000
GSM 02.49.90
OS 3.4.0.0
Thanks
Janus
Same here, I think we need the original T-Mobile rom.
RaZoR X said:
Same here, I think we need the original T-Mobile rom.
Click to expand...
Click to collapse
sounds like you did't run the USPL before you burned your Rom, try and do a search on this in the forum, there are plenty of fixes to get your phones up and running again.
another tip, look at the wiki and download Tmobile UK/Ger version, that should do the trick at least to get your phone running, then make sure you do the USPL before you brick it again.
neilhhardy said:
sounds like you did't run the USPL before you burned your Rom, try and do a search on this in the forum, there are plenty of fixes to get your phones up and running again.
another tip, look at the wiki and download Tmobile UK/Ger version, that should do the trick at least to get your phone running, then make sure you do the USPL before you brick it again.
Click to expand...
Click to collapse
I did ran the USPL.
I took a look @ the wiki, but I think those files (all of them are less then 100k) are theme files.
"T-Mobile_NL_MDA_Compact_III_1.13.114.1_NLD_ExtROM"
IPL: 3.13.0001
SPL: 3.13.0000
The USB is working
With the "PDA Phone ROM Update Utility 3.6.3.1." from HTC I tried to get the MDA functional again.
In the Verify the ROM you want to update window it says this:
From:
Image version: -blank-
To
Image version 3.13.405.1
But after 2% sometimes 7%, it says this: "Error [244]:Invaild model ID".
So maybe the USPL didn't went well.
At the Artemis_Upgrades section of the wiki there isn't a T-Mobile file to download. The language doesn't matter to me.
Which device are you guys trying to flash with a new ROM, if its a UK T-Mobile device its not got the WiFi hardware so don't go putting a ROM on the device that expects WiFi support, T-Mobile Artemis units from Holland did have WiFi built in as does the true HTC P3300 unit, the UK T-Mobile device does not - Mike
RaZoR X said:
I did ran the USPL.
I took a look @ the wiki, but I think those files (all of them are less then 100k) are theme files.
"T-Mobile_NL_MDA_Compact_III_1.13.114.1_NLD_ExtROM"
IPL: 3.13.0001
SPL: 3.13.0000
The USB is working
With the "PDA Phone ROM Update Utility 3.6.3.1." from HTC I tried to get the MDA functional again.
In the Verify the ROM you want to update window it says this:
From:
Image version: -blank-
To
Image version 3.13.405.1
But after 2% sometimes 7%, it says this: "Error [244]:Invaild model ID".
So maybe the USPL didn't went well.
At the Artemis_Upgrades section of the wiki there isn't a T-Mobile file to download. The language doesn't matter to me.
Click to expand...
Click to collapse
ok hear'd this one many times before, your running vista >?
try and search the forum, there is a fix for this then your phone.
@Mike it's the "Dutch" version with indeed WiFi
@Neilhhardy
No, I'm not running Windows Vista at the moment.
Me too have the same problem - flash allways stop at 2% , also can`t flash radio - stop at 73-75% - any idea?
the phone is original HTC (have Wi-Fi and not branded) - never CID locked go to bootloader without any problems but can`t flasing - I think case problem is standart HTC flasher exe - for early models have different flasher software - I have Jaf WM but Jaf WM do not support Artemis - did have released other soft that alow flashing Artemis?
P.S - I thing cause right solution is to flash your device with original version - the OEM version that was instaled by factory will fix the problem
this worked for me on a unlocked mda compact 3
format your memory card first with your pc then copy the rom file (nbh)to your memorycard and rename it to ARTEIMG.nbh
start bootloader and follow the instructions.
http://wiki.xda-developers.com/index..._Card_Flashing
rom i used http://makus.folijka.pl/OrbitO2UK.rar
I found the right solution and fix my phone stop at 2% is hapenind when the phone was flashed before cid unlock (bricked) and can be restored ONLY with ORIGINAL version for that phone
1. go to www.htc.com then go to support area and register your headset by they own htc serial number!!! this is most important step!
2. download update soft - the supportsite know what exactly is rirgt version and language for your pda
3. Flash your phone and will be alive
4. USPL and make after that what you want with your headset
TESTED and WORKED for dead phones(but phone must go to the bootloader)
I did a reset with the rec, pwrbutton and resetbutton. And now he's up and running agian with WM6 Haha
I tried to unlock the device with the AthenaUnlocker, but I got this error:
0x0, 0x100000, SPL-verify.nb
I think I killed him lol
ppl said:
I found the right solution and fix my phone stop at 2% is hapenind when the phone was flashed before cid unlock (bricked) and can be restored ONLY with ORIGINAL version for that phone
1. go to www.htc.com then go to support area and register your headset by they own htc serial number!!! this is most important step!
2. download update soft - the supportsite know what exactly is rirgt version and language for your pda
3. Flash your phone and will be alive
4. USPL and make after that what you want with your headset
TESTED and WORKED for dead phones(but phone must go to the bootloader)
Click to expand...
Click to collapse
this may had worked for you but at the HTC website I get the error that my phone is not branded. true it's a tmobile phone...
can you give me the serial number you entered? if you dont trust it you may make the last 3 digits a X
thanks
Janus
Hello!
I have strange problem with my Wizard. 4 month ago i was trying to install Pathfinder 1.2, but when I installing this ROM using ShellTool my PDA bricked. Now all the time it's frozen on Splashscreen with IPL/SPL GSM and OS information. All HR completed without any errors and all ROM's upgrading finish correctly.
Once time, after 2 months for breaking, my Wizard just started and working very well, I do 2 HR and few SR and my Wizard still working good, but when I shut it down and pull out battery my Wizard again frozen and until now can't wake up. I have CID Unlocked by imei-check. I tried to install many different ROM's, e.g. Wizard Love, Dopod (CHS), T-Mobile, Orange (PL) but nothing work. I also tried way with SD Card but my ROM's doesn't work, I think I need some working dumped ROM. I was searching help on few forum but poeple on polish forums don't know how to help me. May someone here have idea where can i find working dumped ROM or have any other idea how can i fix my Wizard?
Thanks for any help
alldoe
PS Sorry for my english
which is your device,post full data of your phone,IPL/SPL...? Make...?
As you say you installed through Shelltool,is it a G4 DOC chip version ?
You say it's stuck at the splash screen with ipl/spl and gsm version,which splash screen,is it OS (Rom) initial splash screen or a Bootloaders (Multicolored) screen ?
Secondly ,try to get it into bootloaders (multicolor) screen,if it gets into bootloaders,connect it to PC via usb cable,check small usb appears at the bottom of the bootloader mode in the phone,if it does,than flash a carrier's official Rom to recover back to it's default status.
Good luck
Try the Button's ROM (which is in Wizard Upgrading subforum). Then unlock it again (It may be causd by a fake CID unlock when you try to unlock when IPL/SPL is 2.xx)
My current
IPL/SPL 2.24
GSM 02.25.11
OS 2.24.10.1
I have G3, but I was using ShellToll because I can't install by RUU file.
My Wizard stuck at ROM Splashscreen, i can get into bootloader screen, but when I flash any ROM, everything upgrading well but after Reboot it still frozzing at Splashscreen. I was tried Button ROM sometimes but it doesn't work, I have CID unlocked by Imei-check.uk and everything is okay, I can install ROM from G3 and G4 chips. And ... I remember, that before CID Unlocking my IPL and SPL have different value.
PS. I was unlocking my CID, after my Wizard bricked.
alldoe said:
My current
IPL/SPL 2.24
GSM 02.25.11
OS 2.24.10.1
I have G3, but I was using ShellToll because I can't install by RUU file.
My Wizard stuck at ROM Splashscreen, i can get into bootloader screen, but when I flash any ROM, everything upgrading well but after Reboot it still frozzing at Splashscreen. I was tried Button ROM sometimes but it doesn't work, I have CID unlocked by Imei-check.uk and everything is okay, I can install ROM from G3 and G4 chips. And ... I remember, that before CID Unlocking my IPL and SPL have different value.
PS. I was unlocking my CID, after my Wizard bricked.
Click to expand...
Click to collapse
You can download this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe on XDA,it contains IPL/SPL 1.01,and upgrad this rom,then you'll find your IPL downgrad to 1.01,and SPL still is 2.24,and then,use aWizard tu unlock your CID,after this,your CID should be unlocked,you can use RUU upgrad any rom you want.
I just do this yesterday,my CID isunlocked now.And RUU now works on my device.
luoluomeng said:
You can download this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe on XDA,it contains IPL/SPL 1.01,and upgrad this rom,then you'll find your IPL downgrad to 1.01,and SPL still is 2.24,and then,use aWizard tu unlock your CID,after this,your CID should be unlocked,you can use RUU upgrad any rom you want.
I just do this yesterday,my CID isunlocked now.And RUU now works on my device.
Click to expand...
Click to collapse
Hello! I have CID unlocked. When I install Button ROM my IPL and SPL is the same (1.01). Every RUU works but It still frozen. 2 Days ago i found on other forum this advice:
INSTRUCTION :
1. miniSD - formated in PC - FAT format (now FAT32 !)
2. Wizard On and Bootloader (press reset and keep photo button let go reset) 3 color display. Put in card to Wizard.
3. Connect USB - PCC to PC
4. Launch MTTY 1.42 (my ver.) with USB connection
5. Write command - r2sd os end press enter
6. Program it will record OS on miniSD
7. After recording make Hard Reset or turn on Bootloader
8. On Display should be written - Format partition ?? (5 sec.) - to confirm press Voice dial button. If inscription it will disappear repeat point 7.
9. If Format partition successful wait OS is write. Done.
10. Draw out miniSD
11. Make Hard Reset
12. Enter in bootloader
13. FOR NON CID WIZARD - Flashing Wizard RUU (must be proper version) - ERROR 300 is bad RUU ERROR 266 turn off Wizard and turn on connect to PC
14. With CID (for example CID G4) seek forum for flashing Wizard with CID G4
My Wizard it lives
Click to expand...
Click to collapse
I was carry out all command step by step, and after flashing proper version Orange ROM my Wizard woken up, but today my Wizard get stuck again and now this way don't work, and I have to find a new method to rescue my PDA.
My Wizard woke up! I find ERA PL ROM (RUU_Prodigy_3829_382130_027111_TMO_PL_PLK_Ship) which flash excellent and working, but now I have a new problem. I can install other ROM after that but none of them work, every stucked at Splashscreen like before.I need to find some WM6 ROM which will working? Someone have some suggestion?
alldoe said:
Hello!
I have strange problem with my Wizard. 4 month ago i was trying to install Pathfinder 1.2, but when I installing this ROM using ShellTool my PDA bricked. Now all the time it's frozen on Splashscreen with IPL/SPL GSM and OS information. All HR completed without any errors and all ROM's upgrading finish correctly.
Once time, after 2 months for breaking, my Wizard just started and working very well, I do 2 HR and few SR and my Wizard still working good, but when I shut it down and pull out battery my Wizard again frozen and until now can't wake up. I have CID Unlocked by imei-check. I tried to install many different ROM's, e.g. Wizard Love, Dopod (CHS), T-Mobile, Orange (PL) but nothing work. I also tried way with SD Card but my ROM's doesn't work, I think I need some working dumped ROM. I was searching help on few forum but poeple on polish forums don't know how to help me. May someone here have idea where can i find working dumped ROM or have any other idea how can i fix my Wizard?
Thanks for any help
alldoe
PS Sorry for my english
Click to expand...
Click to collapse
i have the same proplem but i have a g4 wizard and it's not cidlocked tell me plz what to do plzzzzzzzzzzzz :'(
hi,
I recently buy a SPV M600 and this was working fine! When a try unlock that for put a difrent company sim that never start up again! Now the item freeze on first screen, where that show the IPL,SPL,OS and GSM versions!
Anyone have solution for this problem? I try update the rom, for a RUU but the problem still .
Best regards
gats
Have you tried a Hard Reset? (Hold the Comm Manager button and the Camera button and soft reset)
yes, i try a hard reset, phone restart and freeze again!!
I think about it , and the phone are Sim locked and CID locked, is for that reason he freeze?
Is it a G3 device or a G4 device?
The SIM Lock shouldn't cause this, but try taking the SIM out and seeing what happens.
is a G4 model.
Sim card was always out, because it isn't unlock to put my sim.
Nobody can hep me? I upgrade the rom for the original of orange in same language but the phone continue freezing at start!
I don't no what i can do more!
Normally, you should SIM unlock before flashing the ROM...
What brand is the device?
I think i found the problem! I didn't flash the rom before updating and didn't unlock CID. I am thinking now, how to repair the phone now!
So, the phone are sim locked and CID locked, i ll CID unlocking with hardspl, but i ll not can copying the necessery files into pda directory, like this said on "Rom flashing for dummies" on Wiki!! So can i flashing the rom from BootLoader?
The phone is in used condition, but it all functionally becuase i work with that before update the rom and have this problem!
Best Regards
Gats
If it's in/can get to bootloader, it should be possible to flash a WM5 NVID ROM. from there, you can HardSPL, SIM unlo ck and then flash a New ROM.
If it's in/can get to bootloader, it should be possible to flash a WM5 NVID ROM. from there, you can HardSPL, SIM unlo c
ck and then flash a New ROM.