Hi,
I have a MDA Vario device which I would like to upgrade to the newest QTEK-rom. So, I have to CID-unlock the device which is not working out as it should be.
I already got the sim-unlock-code with lokiwiz03a after I manually copy-ed the enablerapi.cab to my phone.
I use lokiwiz02a for the CID-unlock but this fails with some kind of interal error and the device reboots, I have a screenshot of the error just before it reboots, it's here: http://www.bulls-with-spirit.nl/error.jpg
I hope you guys ca help me out with this!
Related
Hi guys, at the mo i have my phone in boot loader with the 4 colours and usb on the bottom left..
i am looking for the rom file.....currently i have tried using : -
Qtek_9100_RUU_Prodigy_10107105_Qtek_WWE_ship.exe from ftp://xda-developers.com/Uploads/HTC_Wizard/Roms/Qtek/ but when i load it says
'The application has failed to start because RAPI.dll was not found. Re-installing the application may fix this problem'
have also tried the T-mobile one and it says the same thing as above
so what do i do now?????????? someone please give me a direct link to the correct file as i cnt find it ne where
thanks
?? anyone please...
According to the Northern Hill Software web site, these kind of RAPI.dll errors can occur because you don't have ActiveSync installed on your PC (or your installation is corrupt).
Man, serious déja vu... I'm POSITIVE I've had this same discussion with someone else in the past on these forums before. :S
Hi,
I also experienced this problem. But after disconnecting the usb connection and after soft resetting the mda the old installed version worked again.
For me the problem was that i didn't unlocked the CID. I first had to unlock the CID (with the MDA vario) to be able to update an other rom.
Hallo Guru's,
I have a MDA vario fron T-mobile int the netherlands.
I would like to change from netherlands to english and
unlock the phone.
Can somebody link me up 'cos the topics are not helping.
I can't find lokiwiz on the forum to download.
Please help help help!!!
lokiwiz http://forum.xda-developers.com/viewtopic.php?t=33796
ROMs - ftp://xda:[email protected]/Uploads/HTC_Wizard/
thout was not all complete.
You need to unlock two things:
SIM lock to be able to use non-T-Mobile SIMs - use lokiwiz for this
CID lock to be able to flash with another (WWE instead of NLD) ROM - use aWizard for this
I did this and all works gr8 now
thout was not all complete.
You need to unlock two things:
SIM lock to be able to use non-T-Mobile SIMs - use lokiwiz for this
CID lock to be able to flash with another (WWE instead of NLD) ROM - use aWizard for this
I did this and all works gr8 now
Tankx guys for the reaction.
I have downloaded lokiwiz but it appears on the screen...
DO NOT DISCONNECT UNTIL PHONE REBOOTS...
But my phone doesn't reboot!!! When I manually
reboot the phone I get the message that it failed
because I disconnected it.
I have tried both U and C.....
I copied the files to the root C:\
What I'm I doing wrong?
George
Georgekw said:
Tankx guys for the reaction.
I have downloaded lokiwiz but it appears on the screen...
DO NOT DISCONNECT UNTIL PHONE REBOOTS...
But my phone doesn't reboot!!! When I manually
reboot the phone I get the message that it failed
because I disconnected it.
I have tried both U and C.....
I copied the files to the root C:\
What I'm I doing wrong?
George
Click to expand...
Click to collapse
I did that and that message was on my screen for about 5-7minutes I think, then something else came written up and in 30seconds the phone rebooted by itself. so maybe try again?
Hi Guys,
Despite the positive ractions on the forum
lokiwiz is not working for me.
I have given up...its so frustrating
Tankx though to all those who tried 2 help
Problem solved With the help of MOTIN
Hallo U all,
Motin deserves a big medal.
He has guided me through skype
and my MDA is unlocked now.
Big Tankx to u Motin
Re: Problem solved With the help of MOTIN
Georgekw said:
Hallo U all,
Motin deserves a big medal.
He has guided me through skype
and my MDA is unlocked now.
Big Tankx to u Motin
Click to expand...
Click to collapse
You should tell everyone what youve done wrongly so the same mistake won't happen again
I was updating my new i-mate SP3 (typhoon) to the latest i-mate ROM 2.4.33.11 which completed successfully but now every time I turn on the phone it goes directly to the bootloader tri-color screen. I tried several times to update the ROM again but it does'nt help. It shows the proccess completed successfully but the phone is still stuck in bootloader mode.
In the bootloader screen it shows the following
IPL 1.00
SPL 2.5.0102
I even tried to flash the ROM through an image of Orange4114_ALL_SPL1010091 on a miniSD card but it gives an error message
"Not allowed update!"
Please help me figure out how to get my phone working again.
Same PROBLEM here HELP..!
Exactly the same problem if anybody can help ..please do.
spl
hi
same problem my sp3
SPL
Same problem on spv c500 stuck in bootloader but with 2.05.0130 SPL
sp3i stuck
Hi all,
I have the same problem, but I didn't try the mini-sd boot.
surfturtle, will you kindly send me the way?
Thanks
Hi guys...
I don't have the Typhoon and don't know if this will work for you, but this is at least how we fix this problem on the Hermes:
Enter into bootloader using mtty.exe and run the command "set 14 0" and "task 8". Phone will reboot and start OS.
If it doesn't work, then try the SD flash method mentioned by surfturtle. Keep in mind that if your device is not superCID the image file should match the CID of your phone (must be an original shipped update from your vendor). This method consist on:
1) extract the rom image from the rom upgrade exe (winrar or cabextract can be used for that) and you'll find a .nbf file.
2) Rename it to TYPHIMG.nbf
3) Format your SD card in FAT32
4) Put TYPHIMG.nbf on the root folder of your SD card
5) put sd card on the phone, and enter into bootloader
6) confirm flashing on screen, and wait until the process is finished (do not reset it, will take about 30min).
Check the hermes wiki if you need more information on any of this.
Good luck!
sp3i stuck
thanks pof,
but where would I get mtty.exe and where will I see "set 14 0" & "task 8"
thanks again.
Re: sp3i stuck
@Tall_Man: See the hermes wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
I-mate ROM
Hi, I did the upgrade through the PC but the device info still shows the old ROM: 2.1.33.13 No error messages and the phone keeps hanging on me.
Is this version of ROM the Arabic one? If not, can someone post or point to where I can download the arabic version? I did not find it on the I-mate website.
Thanks in advance,
I-mate SP3 (?rom 2.1.33.13)
Help!
Yesterday when i was trying to installed Leies CE-Star Crossbow on my x01ht, maybe it didn't support WM5.0 and now my x01ht is stuck in the bootloader screen forever!
I've tried to flash it again by micro SD card, it did completed the flashing process but it's still the same, stuck in the bootloader screen.
i've also try the mtty usb connection and set 14 0, still the same...
my bootloader version is 1.04
will there by anyway to fix it??
Please help...i'm a newbie to ppc and i've only been using the phone for 3 days!!
hi, as first look on wiki - http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes then for example in here - http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES or here - http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems problem 4. then ask us if it is another way to solve your problem ;-) and if this did not help, provide us more information about your device.
i have tried using the SD card flashing method with RUU_Hermes_DopodAsia_CHT_1237084_1060010_SHIP and HER_DopodAsia_1237074_1060010_WWE_SHIP.exe rom
But still no difference
do i need to use HTC Hermes SIM & CID Unlock . v3 first even though it's 1.04 bootloader?
does it work on my x01ht??
Please help...i'm really confused
Hi,
I tried some ROM from this website to change my wizard to wm6.
When the RUU finishes at 100procent my device restarts and normally it should be flashed. But mine always restarts the original rom. On the pc it says that the procedure has finished succesfully.
Dont know if this has anything to do with locking, but I used the lokiwiz to unlock my device.
Anyody an idea to solve this?
Grtz
Annihil8
your wizard is still CID locked...
try it again ... follow the instructions ... read carefully the messages when running lokiwiz ... could be misleading sometimes at a first glance ...
I'll give it another try. But the lokiwiz keeps telling me that the device is unlocked. It doesn't even give me an error like you get with the AKU2.
error:itwritedisk-an internal error occurred
So that is why I think that should be ok...
you may want to use the WST tool to check the CID status ... you find it on this forum. don't have the link on hand right now ...