Hi guys, at the mo i have my phone in boot loader with the 4 colours and usb on the bottom left..
i am looking for the rom file.....currently i have tried using : -
Qtek_9100_RUU_Prodigy_10107105_Qtek_WWE_ship.exe from ftp://xda-developers.com/Uploads/HTC_Wizard/Roms/Qtek/ but when i load it says
'The application has failed to start because RAPI.dll was not found. Re-installing the application may fix this problem'
have also tried the T-mobile one and it says the same thing as above
so what do i do now?????????? someone please give me a direct link to the correct file as i cnt find it ne where
thanks
?? anyone please...
According to the Northern Hill Software web site, these kind of RAPI.dll errors can occur because you don't have ActiveSync installed on your PC (or your installation is corrupt).
Man, serious déja vu... I'm POSITIVE I've had this same discussion with someone else in the past on these forums before. :S
Hi,
I also experienced this problem. But after disconnecting the usb connection and after soft resetting the mda the old installed version worked again.
For me the problem was that i didn't unlocked the CID. I first had to unlock the CID (with the MDA vario) to be able to update an other rom.
Related
Can anyone help tried to upgrade my XDA II and device got disconnected from cradle, when powering up just displays (serial v1.06) and won’t continue to boot.???
Put it back in the cradle, it should display usb on the xda 2, just start the upgrade again.
Ta for your reply HOWEVER!!
The computer can not detect the XDA and is showing un known USB device?
Any more suggestions?
If the PDA screen shows "Serial 1.06", try to put in cradle. Is the screen changed to "USB 1.06"?
If so, kill ActiveSync (wcescomm.exe) and try to run update again...
Receiving Error message 100
The rom image you are trying to use is not designed to work with your pocket PC, please check the vendor web site and download the correct ROM update.
WHICH ROM UPDATE?
Please advise
Re: Receiving Error message 100
UKA said:
The rom image you are trying to use is not designed to work with your pocket PC, please check the vendor web site and download the correct ROM update.
WHICH ROM UPDATE?
Please advise
Click to expand...
Click to collapse
Message 100? And what's the name of this error message?
Xda_II Upgrade_V16050
Can you advise of any other upgrades that would work?
I think I have done it!
I have downloaded V172 and it seems to be upgrading.
I will keep you posted
It has worked
I was trying to install a previous version of softwear, I have know installed V172.
I will keep you posted
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
HELP ME!!!! black display after ROM upgrade
I've about the same problem...
I tried to upgrade my XDA II ROM... I'm a novice!!! I think...
1. I putted my XDA in the cradle, started install application
2. the same error.... and now I've a XDA II with a black screen and i can read USB at the upper and V 1.
3. I tried to re-install the ROM upgrade, but everytime it try to erase the ROM and the response is always: error 112 CE ...bla bla bla.
4. upgrade software suggest me to do a reset and to re-install... it's a loop!!! without solution!!!
Can U help me???
I've hope?
....it's only a week i bought it...................
P.S.
Sorry for my very bad english......
Guys, what the upgrade says is VERY MUCH IMPORTANT!
In other way, nobody can help you... "Bla, bla, bla" is not so much helpfull...
Model ID Error
I having the same problem, my error message is MODEL ID Error Message 100. My mobile is Qtek 2020. XDA II
Hi all, Hopefully some wise person can assist me.
I downloaded a ROM update for my XDA11i from this site :Alpine_Ext-1.11.162_Radio-1.04_O2stuffstripped_Camera_Fixed which was highlighted for a Alpine. However on running the update you get a picture of a MDA and a message "The ROM upgrade utility does not design for your device. Please get proper ROM upgrade utility and try again"
Unfortunatly my XDA11i is now stuck on a blank screen with Serial V1.01 and is not recognised by activsync or My computer. However in the cradle the screen shows USB V1.01
I have tried installing the official O2 ROM update: AP_O2UK_11100_169_10000_ShipXdaIIi but get the following message Error 101: connection error. I assume because my XDA is not recognised by Activsync.
I have spent days trawling the forum and trying the various solutions to no avail. Most of the links are dead as in archive.
1. On reset and hard reset the serial text only dims.
2. I tried the process posted by CelticLo and copied a ROM image to a SD card, however again on hard reset the sserial text only dims.
Any assistance would be very much appreciated.
Have you tried updating to the latest version of Active Sync on XP
or following the guide for Vista
Take off battery. wait for about 10 hrs. put back battery and switch on the power.
Thanks for the tip's
I have tried Activesync on XP and Vista still does not work.
I have removed the battery for two days and recharged it through the cradle, on returning the battery and switching on. It returned to the serial screen.
I tried flashing with the following rom : [Maxishare_net]alpine-1.11.171-radio-1.04-bluetooth-patched-camera-fixed again i get the message it is the wrong ROM??
I can not understand why I keep getting the wrong ROM message as it is definetly a XDA IIi PH10C
thanks anyway
Furkinl said:
I have tried Activesync on XP and Vista still does not work.
I have removed the battery for two days and recharged it through the cradle, on returning the battery and switching on. It returned to the serial screen.
I tried flashing with the following rom : [Maxishare_net]alpine-1.11.171-radio-1.04-bluetooth-patched-camera-fixed again i get the message it is the wrong ROM??
I can not understand why I keep getting the wrong ROM message as it is definetly a XDA IIi PH10C
thanks anyway
Click to expand...
Click to collapse
erm u are trying to flash on a pc running vista?? thats your problem, u cannot flash on a vista pc, xp home/pro ONLY!
Thanks for the advice, tried on XP and it worked fine, it would seem that activsync was not required in this case. At least my XDA is ALIVE for now.
many thanks
You simply could revive it again by Resetting it via the stylus
thnx 4 all the soloutionsss
i had same problem , but once i tried it on xp, its works for me, my ppc now is refresh installed,
thnxx
qtek 2020i
for information the french rom is available on this place http://www.planete-htc.com/index.php?mod=download choose dangaard section there is two files to download
1. choose 2020i dangaard rom
you can not use it
2 download the radio file
it contains an exe called upgradeut make it in the directory of your dangaard folder and you will be able to flash it
it work also for pda stuck in serial usb
voila
qtek 2020i
radio file 1.04 two mega
do a hardware resett and it should be the phone back to defaults
XDA IIi V 1.01 Serial /USB
Hello,
I tried to update my XDA IIi from a new rom version found at o2.ie website but my XDA IIi is stuck and showing Serial on top and v 1.01 at botom. When i attach it with cardle it shows USB instead of serial.
I have tried Almost everything that i found on this forum in last three days.
Hard reset / soft reset/ new installation using different version etc.. but nothing worked for me..
Now I am really confused and can't find what to do.. Can any one from XDA gurus/ developer help me and sumarize what should i do?
Thanks in Advance
Zeeshan
Yes, i have the same problem i did exactly what was done above me pls can someone help!!!!!!!!!
Furkinl said:
Hi all, Hopefully some wise person can assist me.
I downloaded a ROM update for my XDA11i from this site :Alpine_Ext-1.11.162_Radio-1.04_O2stuffstripped_Camera_Fixed which was highlighted for a Alpine. However on running the update you get a picture of a MDA and a message "The ROM upgrade utility does not design for your device. Please get proper ROM upgrade utility and try again"
Unfortunatly my XDA11i is now stuck on a blank screen with Serial V1.01 and is not recognised by activsync or My computer. However in the cradle the screen shows USB V1.01
I have tried installing the official O2 ROM update: AP_O2UK_11100_169_10000_ShipXdaIIi but get the following message Error 101: connection error. I assume because my XDA is not recognised by Activsync.
I have spent days trawling the forum and trying the various solutions to no avail. Most of the links are dead as in archive.
1. On reset and hard reset the serial text only dims.
2. I tried the process posted by CelticLo and copied a ROM image to a SD card, however again on hard reset the sserial text only dims.
Any assistance would be very much appreciated.
Click to expand...
Click to collapse
Where can I download this rom?
Alpine_Ext-1.11.162_Radio-1.04_O2stuffstripped_Camera_Fixed
Thanks in advance
Chet
look and lern
put qtek 2020i in stativ (conect to pc via usb)and push power ( on screen will apear USB and v1.01), and you dezarhive :astel_wwe_11100_112_10200_ship, and doble klik on AlUpgradeUt and bios at ppc wil be update !!!!! This is all, the ppc will be now reinstaling, be patient and wait until will be reinstaled (25 min)
Hi
I have an O2 Orbit and was attempting to add a few nice cabs to my cooked rom. Anyway it crashed about 6 times running after it had worked fine so I decided to do a hard reset.
Now, when I go into bootloader I get SPL 1.25.0001 and SPL 1.25.0000 with the RUU and USB motifs at the top right and bottom left respectively.
I have tried running ROMUpdateUtility.exe and flashing:
a) the original Orbit rom which just gives a FLASH WRITE ERROR
b) a cooked ROM (but I think I need to USPL) which fails after 3%
How do I re-USPL and then re-flash a cooked ROM...I seem to be able to find small bits of information but not everything I'm after.
I did this about 18months ago so I've completely forgotten again now!
Please can somebody take the time to explain what I need to do.
I can get it into Bootloader and connect it to an XP machine so it's recognised by the update utility.
Thanks for any help.
Follow the links
Follow the link http://forum.xda-developers.com/showthread.php?t=311403
You may need to check about how to recover the bricked device through the link http://forum.xda-developers.com/showthread.php?t=308242
you will be guided on how to unlock before installing any cooked ROM to O2 Orbit or Artemis.
Hope the above clarifies and solve your problem.
unfortunately the first link doesn't help as I can't get into my WM device's OS for it to actively connect through Active Sync.
The device was already unlocked as I had a cooked rom on it before a hard reset (does this matter). I've tried the WM5 and WM6 o2 orbit roms and neither flash...both fail on 5% with FLASH WRITE error.
Please if anyone else can help I'd be greatly appreciative. I've lost my entire phone as it is. My partner has just lost her father (my father in law to be) and we have been staying in constant contact whilst she is away.....I can't do without a phone.
Here's hoping somebody takes pity on me and gives me a hand.
Currently sitting at bootloader...can connect with mtty but no idea what to do with it (password of BsaD5SeoA doesnt work)
Right,
I'm at my bootloader and I also have a non-SDHC microsd card sitting with me with an ARTEIMG.NBH on it...it starts to flash when using it then says "SD FAT failed!!!"
Please help!
Anyone? Dire Straits lives here!!
Sorry, i know there so many posts about this problem, but i can't understand it very well, sorry for that.
Here's my problem:
The JasJam that i have says "No GSM", so i tried to fix it, i searched the net for possible solutions, so luckily i found one, well i thought that was the answer, unfortunately i think i downloaded SPL version 7 (which i think is not the right thing to do) then when i was upgrading it, "tricolour bootloader" appears, and then next screen was loading and it is 0%.. then the ERROR #somethng appear, and it stucked on the tricolour bootloader, i tried to fix it again, i tried to upgrade the ROM, SPL, and all because im so hopeless already. Next problem is ActiveSync 4.5 can't detect the jasjam, i tried everything, different PC, laptop and different USB cable as well, i update its .NET framework also, but still there's no connection..
Please HeLp!
I need it badly, please do it step by step, i really really need it please
THANKS IN ADVANCE!
Useful Links:
http://forum.xda-developers.com/showthread.php?t=369434
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Mike
Hi there, I've been reading the forum for about a week trying to find a fix for my deceased orbit xda.
Problem started when the phone started crashing, the screen was going white and needed re-starting. Eventually it failed to load and froze at the blue screen with the red writing!
so I started reading and tried soft and hard re-booting to no avail.
I have managed to get the phone into bootloader and connected a USB
it recognises the usb and installs as a mobile device on my laptop but here's where it gets tricky. I dunno alot about phone's and am struggling to understand some of the processes. I have tried booting off the SD card but it said invalid certificate (i used the artiemg.nhb file from rapidshare)
I have all the original paperwork and cd's for the phone but dont know what or how to flash a ROM.
what do I need and more important how do I do it without all the tech talk.
Its a WM5 phone - thanks
EDIT - Just to clarify, have just tried the romupdateutility on raving_nanza's sig but recieve an error - am running vista on my laptop
Update, I managed yesterday to get the phone to boot from the SD card and indeed it flashed it and WM5 is back up and running, the new problem is its network locked (to O2 i presume). I was using this phone on orange previously without an issue????
any Idea's other than paying imei check?
...
danv6saxo said:
just tried the romupdateutility on raving_nanza's sig but recieve an error - am running vista on my laptop
Click to expand...
Click to collapse
what link was it?
what error did you have?