Sorry, i know there so many posts about this problem, but i can't understand it very well, sorry for that.
Here's my problem:
The JasJam that i have says "No GSM", so i tried to fix it, i searched the net for possible solutions, so luckily i found one, well i thought that was the answer, unfortunately i think i downloaded SPL version 7 (which i think is not the right thing to do) then when i was upgrading it, "tricolour bootloader" appears, and then next screen was loading and it is 0%.. then the ERROR #somethng appear, and it stucked on the tricolour bootloader, i tried to fix it again, i tried to upgrade the ROM, SPL, and all because im so hopeless already. Next problem is ActiveSync 4.5 can't detect the jasjam, i tried everything, different PC, laptop and different USB cable as well, i update its .NET framework also, but still there's no connection..
Please HeLp!
I need it badly, please do it step by step, i really really need it please
THANKS IN ADVANCE!
Useful Links:
http://forum.xda-developers.com/showthread.php?t=369434
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Mike
Related
Hi guys, you have been a great help to me so far, but I just can't find anythign to help me with this now. I have a hermes100 with WM6 and i just flashed the radio to 1.54.07 and it gave me an option for hardSPL and said that it was recommended so i investigated and found the upgrade for it.
I ran the wrapper file and it goes to the stage where it puts my hermes into flash mode but it displays "spl1.09" on the screen yet when push the ok and power keys during reset it shows "spl2.03"
it goes through the screens until it puts my phone into flash mode and it says it is trying to read my device then i get error code (260) that it isnt connected. Anyone know a way to fix this?
Use sd card method, page 116 on here: http://forum.xda-developers.com/showthread.php?t=296722
Hope this helps...Cheers...
okay, i tried the sd card method and it does the same thing. after it gets to the bootloader screen i just sits there with
"HERM100
IPL-SSPL by des
HERM 100
SPL-109.ds
serial"
okay, nevermind, i just had to reinstall the drivers for when i was in bootloader mode. I got it to work, thank you for you help.
cheers :-D
No problem, now you should be able to flash any hermes rom to your hearts content with the knowledge you have a safety net if something does(and probably will, as you'll find flashing addictive, sooner or later) go wrong. Pleae remember though that Hard SPL ISN'T a guarantee that you will be able to fix you phone, it just makes it easier when something goes wrong... Cheers....and happy flashing...
samterry1234 said:
okay, nevermind, i just had to reinstall the drivers for when i was in bootloader mode. I got it to work, thank you for you help.
cheers :-D
Click to expand...
Click to collapse
how did you do this?
Hi guys,
A few months ago I updated from O2s 6.1 to a 6.5 ROM.
Now I want to go back the O2 ROM but the update freezes at 34%. The popup box says it lost connection with the phone.
I tried installing HardSPL but it didnt help. So I tried a hard reset but now I just get a RGB screen with
POLA200 MFG
SPL-2.20.OliNex
CPLD-2
Any suggestions in sorting my problem would be appreciated
Many Thanks
rikpotts said:
Hi guys,
A few months ago I updated from O2s 6.1 to a 6.5 ROM.
Now I want to go back the O2 ROM but the update freezes at 34%. The popup box says it lost connection with the phone.
I tried installing HardSPL but it didnt help. So I tried a hard reset but now I just get a RGB screen with
POLA200 MFG
SPL-2.20.OliNex
CPLD-2
Any suggestions in sorting my problem would be appreciated
Many Thanks
Click to expand...
Click to collapse
First of all check your USB cable... and choose another USB port to connect the cable and try to flash your ROM again
Try this as it has been solved before may help you out
http://forum.xda-developers.com/showthread.php?t=425922
same problem
hi everyone. I have a big problem with my htc touch cruise when I installed a hard spl htc dedicate a Diamond.donc I had a white encrant after I did a hard reset since my htc no longer I have a black encrant are neither green nor orange but when I connect with the pc I am data interface and it does not recognized my htc. In my pay is not qualified repairman three non réparé.aidé unable to please me I tried the commands mtty.exe but does not c I do not really know how it works.
thank you for your patience and for help
Many Thanks for the replies.
I followed the link and i'm confident it will solve my problem. Unfortunately I cannot get mtty to offer "USB" from the dropdown. I remember going round in circles trying to get USB show a few years ago with a SPV C550.
If anyone can help me, that would be great. I'm using Vista. This might be why the steps in both the initial post and replies on the first page don't work for me.
Hello
I bought a second hand phone and I want to downgrade it to 6.1 to get rid of all the rubbish that seems to be on there.
My real problem is that it won't sync via activesync 4.5 - it connects but then hangs on "looking for changes" and I am sure it is something to do with the software.
I have hard reset on seveal occasions now and reinstalled activesync several times too.
I have removed the sd card and other small thing I have found on the net to do but nothing seems to get it going.
Can anyone help me?
I know I have to do some flashing but I have never done that.
Please help!!!
if you want to downgrade it, just download a rom from htc's website, get your phone into bootloader mode, connect to pc, wait for the "usb" message to appear at the bottom, and flash the rom.
(only follow onscreen instructions and the process is simple.)
if you dont know how to get into bootloader, there are videos at youtube and guides in the forum.
hope this helps,
Eyal.
hi anyone pls help,
i have one imate jasjam, the initial problem is i done a hard reset and the phone reboot and it wont finish running the customise application installation, after that the phone cant detect network, i had run a hard spl into the phone and then try to flash a rom that i download from forum but it only run 11% then stop then i realise that the rom i flash is for htc jasjam not imate jasjam, now my phone can only stay at the boot loader mode, i also try different rom but no luck so i think i ask for your help
here is my device details at the boot loader mode
IPL-1.04
SPL-2.10.01ipro
before i flash it i also cant find any radio rom version in this phone so i guess the radio rom also missing or what just not sure....
i think i flash the htc jasjam wrong model rom even now i flash back the original JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship this error message come out "ERROR [260]: update error" and it ask me to check my usb connection.
i search the forum and few member advice me to use mtty and i did tried that many time it didnt work, another member advice me to use this method "Formate yr memorycard & Unzip attached file in your memorycard named Hermimg.nbh & put yr cell in boot mode & follow screen instructions..........this illl boot yr celll out to boot mode......... " i tried that but the phone always stay at boot mode and no other instructions came out at all so im really lost and just hoping somebody can help me solve this problem...
can anyone pls guide me step by step of how to flash this phone back to normal, your help is much appreciated, many thanks.
Hi, i had the same problem flashing from the SD card. Are you using Vista or Windows7? I tried with Vista Format card, drag and drop renamed image onto sd card. Stuck it in the phone, reset and like you say hangs on bootloader. Then i tried the same thing from my Windows XP laptop, exactly the same format, rename drag and drop and everything works fine. Hope this helps
first i tried with vista then i tried with xp the problem still there, any other idea to solve this problem? thanks anyway for your advice
roms?
G'day, I've only really been reading about roms and these phones for only a few hours but I'm pretty sure that htc jasjam and imate jasjam are one and the same phone i think the said rom are used with all hermes type phones..
thanks and sorry for my ignorance if i'm mistaken
Hi ladies,
after searching the threads about bootloader mode and activesync I didnt find a working solution for me. I just received a new HD2 with WM and have had a couple of failed boots - I just resetted the phone and started over. This is working more or less 1-2 times before failing the boot mode again.
So i wanted to install magldr and secondly android rom (DHD), but I cant activesync in bootloader mode in the first place. ofc the display beneath the htc logo shows 0% all the time. What can i do? Unfortunately I dont understand what others said to do in this case (RUU, HSPL )
Can some1 pls explain me what to do?
thx and regards
Ladies?
Read this here, if you still don´t understand what to do, re-read.
And please learn about the search function of this forum, the term "bootloader" will guide to at least one more sticky thread with basic tips and hints.
Thx, this was what i was looking for. Fixed it so far.
Thx tictac