i just updated the rom software from my-xda.com for my o2xda but now microsoft sync is not detectecting the phone
although when i try to connect at start it seem to detect but after a while it looses connection. any help ll be welcome
you need to install activesync 4.2, freeware from microsoft's website,i had the same problem yesterday but it is sorted now, i just use the 4.2 version.
good luck!!
thanks its working, one more thing which sd card works for it and how much size is acceptable
Related
I just upgraded TMO radio stack to 6.24.00, works flawlessly. Tested the RS with calls, web connections, incoming call while on web ... perfect.
However, ActiveSync will not recognize a partnership with my PDA now. Reverts to Guest every connection.
Reinstalled ActiveSync ... no luck. Soft reset PDA ... no luck. Tried it on a WinXP-HE and Win2K computer, same on both.
Have searched forum & seen a few enteries on this subject but no solutions. Running TMO ROM 4.00.21 & TMO RS6.24.00.
Anybody had this issue & successfully resolved it?
Yeap been there seen that but had forgotten about those problems until I read your post! :wink:
Try downgrading back to 3.7, my sig states what I ended up doing to fix it for me! :wink:
Also you might try turning the device off before you put it in the cradle
so times that helped if I remember correctly.
HTH
Resolved problem by uninstalling ActiveSync 3.7.1, restart Windows, reinstall ActiveSync 3.7.1 and it detects new USB hardware, starts the Partnership wizard and things are okay.
Hello Everyone
I am quite new to my MDA Vario which is on UK T-mobile, I decided to do a ROM update, to see if the following could be improved:
Signal
Voice Calls
Any other improvements.
First of all, I got the Qtek 9100 update, it was after I installed it that I realised that I needed an imate version, I didn’t remove the Qtek ROM update, but what I done was to install the Imate Rom update.
This was done yesterday and ever since Active Synch doesn’t work on my home Pc, it doesn’t seem to detect that the phone is connected to the computer, whereas it works fine on my laptop, and also on my Pc at work.
Can anyone advice me on what to do, home PC is where I really need to synch.
Other info: MDA Vario Phone
ROM update installed: K-JAM_WWE_216901_2169101_020710_ship.zip
Active Sync version: version 4.1 latest build used on Home PE, laptop and work PC
Thanks in advance
The only thing I can suggest it to try the old windows standard 'fix all' solution.... uninstall and re-install active-sync from your home PC.
Hello all,
I have bought qtek S200 recently and i have spent a lot of man hours trying to get this thing to sync with my desktop computer. it works fine with my laptop however doesn't want to sync with my desktop.
I get an new hardware wizard when i plug my pda into the USB requests for me to point to the drivers because windows was unable to find drivers.. I have gone through troubleshooting steps where disabling firewall / ant virus. Uninstalling active sync reinstalling / downgrading active sync and upgrading no luck. doesn’t matter if i try 3.8 or 4.2 it doesn't want to recognize my device and asks for the drivers.
i have windows xp with service pack 2 installed. so at this point i am wondering if someone has the driver files for it ? or what should be next step, any help would be appreciated.
Don't even try with activesync 3.8. It doesn't support WM5. Use 4.1 or 4.2...
Can't help beyond that...
I tought I had tried everything as well, when I found this utility over at Modaco (apparently included in the latest Dopod ROM).
Install and switch from RNDIS to Serial using the program and voila - worked like a charm for me!
Hope it helps!
After fighting with this device and my system for about 2 weeks. i noticed that my system had become so unstable that it wont' accept any new hardware. I tried installing a new 3COM network card and mostly 3com NIC's dont' require drivers however my system poped a window stating can't find drivers and put the device in system not working properly status.
so then i decided to format my computer and after the format, installed service pack 2 for xp and tried ACTIVE SYNC. without a problem it worked fine.
Although it was working with RC2, strangely, it doesn't with RTM, the driver is installed but only the file transfere is working. I can see an icon of my JJ in computer (ex. my computer) and when click on it, i can browse the JJ ram and the storage card only, but there is no any syncing capabilities. Any one has an idea about that problem. May i am going to try the old RC1 trick:
http://www.microsoft.com/downloads/...roductID=7C1FA894-B2C5-41BE-8D97-E145DD2A883B
Still there is no respoonse after 26 viewers, does this mean that there is no one has installed the new vista RTM release or I am asking a selly question?
_____________________________________
JJ with AKU 3.2 1.90.96
Yes, I synced my HERMES with http://www.microsoft.com/downloads/...6a-a72d-4aef-9663-31ce2fefbada&DisplayLang=en this tool, but sometimes don't, lot of crashes...
Just have a try:
disable any Anti-Virus and Firewall softwares.
I tried downloading the sync tools beta, but fiind it hangs outlook (2007).
I'm going to give it a try just running wirelessly and see how I get on.
The same don't know why it's not working...
sergiopi said:
Yes, I synced my HERMES with http://www.microsoft.com/downloads/...6a-a72d-4aef-9663-31ce2fefbada&DisplayLang=en this tool, but sometimes don't, lot of crashes...
Click to expand...
Click to collapse
I tried it, it worked, thanks. The difference is that i followed the trick mentioned above also, i added the registery key WHOS, then installed the WMDC beta program, so, will try to use the WMDC program only without the registery in another installation.
Now I sync 95% of times, I just unchecked in settings-> connections->USB to PC-> use enhanced USB
I have managed to get it working after having reflashed the rom on my phone (probably not required) and re-installing the Windows Mobile Device Centre beta 3.
I think the trick is to make sure your phone can connect to Vista OK before you install the WMDC software and then install the software with the phone connected.
Good luck
Are you also able to flash / upgrade the phone using Vista RTM and MDC beta 3? I'm not
First of all i really want to thank all the Helmi_c and all the developers; My BA is most updated running wm6.
Well much better than wm5 but I have some issues:
1. cant sync it with my PC in anyways (BT, usb etc), USB drivers are not working correctly.
2. sometimes when i pick or dial a call, i cant hear nething.
and last but not relevant to this, guys how do i stop my BA slider from falling down when I use keyboard.
1. Try delete the actual partnership in AS, sync again; if not reinstall AS on PC
2. No problem here with the sound.
same problem here
I upgraded my XDA2s, customized it,backedup, then upgraded my brothers XDA2s and used my customized backup on his XDA2s.
Now my XDA connects fine, but his doesn't !!!
Both our XDa2s's are identical in everyway.
tried a hard reset and restore from another backup and still no luck!
we were trying to save time re-installing the same softwares.
tried deleting partnerships, no luck. tried spb backup and clone, no luck.
any ideas!
Do you get any error messages on AS? Can you browse the internet from device?
usb drivers
can anybody post usb drivers i think this is the problem cause my device isnt installed properly it says problem with inf file.
whoever is able to connect his device to xp desktop via active sync usb connection, please copy the drivers folder contents from program files in active sync folder.
thanks, hope this works
Is your windows firewall enabled? Since WM6 activesync makes use of a LAN connection to sync with the PC, you must allow activesync trough the windows XP firewall, or disable the windows XP firewall completely...
no sound problems with me...
did you try to install WM6_SoundFix_.cab ?
A-