First of all i really want to thank all the Helmi_c and all the developers; My BA is most updated running wm6.
Well much better than wm5 but I have some issues:
1. cant sync it with my PC in anyways (BT, usb etc), USB drivers are not working correctly.
2. sometimes when i pick or dial a call, i cant hear nething.
and last but not relevant to this, guys how do i stop my BA slider from falling down when I use keyboard.
1. Try delete the actual partnership in AS, sync again; if not reinstall AS on PC
2. No problem here with the sound.
same problem here
I upgraded my XDA2s, customized it,backedup, then upgraded my brothers XDA2s and used my customized backup on his XDA2s.
Now my XDA connects fine, but his doesn't !!!
Both our XDa2s's are identical in everyway.
tried a hard reset and restore from another backup and still no luck!
we were trying to save time re-installing the same softwares.
tried deleting partnerships, no luck. tried spb backup and clone, no luck.
any ideas!
Do you get any error messages on AS? Can you browse the internet from device?
usb drivers
can anybody post usb drivers i think this is the problem cause my device isnt installed properly it says problem with inf file.
whoever is able to connect his device to xp desktop via active sync usb connection, please copy the drivers folder contents from program files in active sync folder.
thanks, hope this works
Is your windows firewall enabled? Since WM6 activesync makes use of a LAN connection to sync with the PC, you must allow activesync trough the windows XP firewall, or disable the windows XP firewall completely...
no sound problems with me...
did you try to install WM6_SoundFix_.cab ?
A-
Related
Hello all,
I have bought qtek S200 recently and i have spent a lot of man hours trying to get this thing to sync with my desktop computer. it works fine with my laptop however doesn't want to sync with my desktop.
I get an new hardware wizard when i plug my pda into the USB requests for me to point to the drivers because windows was unable to find drivers.. I have gone through troubleshooting steps where disabling firewall / ant virus. Uninstalling active sync reinstalling / downgrading active sync and upgrading no luck. doesn’t matter if i try 3.8 or 4.2 it doesn't want to recognize my device and asks for the drivers.
i have windows xp with service pack 2 installed. so at this point i am wondering if someone has the driver files for it ? or what should be next step, any help would be appreciated.
Don't even try with activesync 3.8. It doesn't support WM5. Use 4.1 or 4.2...
Can't help beyond that...
I tought I had tried everything as well, when I found this utility over at Modaco (apparently included in the latest Dopod ROM).
Install and switch from RNDIS to Serial using the program and voila - worked like a charm for me!
Hope it helps!
After fighting with this device and my system for about 2 weeks. i noticed that my system had become so unstable that it wont' accept any new hardware. I tried installing a new 3COM network card and mostly 3com NIC's dont' require drivers however my system poped a window stating can't find drivers and put the device in system not working properly status.
so then i decided to format my computer and after the format, installed service pack 2 for xp and tried ACTIVE SYNC. without a problem it worked fine.
I have been trying to sincronize my S200 Qtek but it is impossible. I have made several hard and soft resets and tried with three different computers. I have installed 4.1, 4.2 and 4.5 beta versions of ActiveSync, but it is always the same: ActiveSync seems to turn on but no sincronization initialize when I connect my S200 to the USB port.
I have also made a format and reinstall windows XP but I can't syncronize information... please help me!
I have also tried to install "USB killer" without success...
Did you disable Win XP firewall? You have to disable it or any other firewall that may be installed.
If that solves your problem search MS site for how to authorise ActiveSync for your firewall.
Yes, in fact when I reinstalled windows I didn't install Norton because of the firewall. I have also unactivated windows firewall... but no sincronization occurrs
Maybe you could try another USB Cable? Or try to sync using Bluetooth?
Can't sync my S200 either...
Don't think it's cable because it is brand new :'(
Have you tried to upgrade to the latest activesync right after the installation of windows? (found here)
And perhaps some overactive antivirus programs can bug up syncing too sometimes. Did the installation of new hardware go well after you plug in your device?
When you plug in, did nothing happen or was there a small screen saying it was getting information from the phone? If yes, were you able to setup a connection (guest etc) and after that it didn't want to sync?
Got this issue resolved the fault was some tweaking I did... See, I use fixed IP with my router so I disabled the DHCP client service on services.msc... So activesync could't get the right adress from the prophet... Still don't know how I manage to make that assumption about this problem, but gladly I did
Hope this help other people with similar problem...
Same issue
tonimacaya said:
I have been trying to sincronize my S200 Qtek but it is impossible. I have made several hard and soft resets and tried with three different computers. I have installed 4.1, 4.2 and 4.5 beta versions of ActiveSync, but it is always the same: ActiveSync seems to turn on but no sincronization initialize when I connect my S200 to the USB port.
I have also made a format and reinstall windows XP but I can't syncronize information... please help me!
I have also tried to install "USB killer" without success...
Click to expand...
Click to collapse
Did you manage to fix your USB problem?
I need some support with the same problem.
Regards,
h
Hi!
I have tried now on two computers (one old windows 2000 platforn with activesync 4.2 and the other with Windows Vista Ultimate x64 with WMDC) and on the old platform it starts to connect but after a while an error. On the new I get no connection to WMDC. I always use my USB cable. The cable works, both loads and turn my loadinglight from yellow to green. My smartphone is a QTEK 9100 Windows mobile 5.
The error occured after I did scan on the phone for duplicated files and removed them. Afterwards it just wont sync. I have tried some tools, turning of firewall, reinstaling and all of the stuff recommended on the WMDC but now I am lost
What should I do?
wwwlewis
You may have removed a critical file that you needed for syncing when you removed the duplicate files. Does whatever program you used for that have a restore option? If not, you may need to backup the files you want to save and do a hard reset.
I have tried a hard reset now and it still dosent work. Now I am deeply lost
Try going to start-->settings-->connections tab-->usb to pc and either check or uncheck the enable advanced network functionality check box and see if that fixes it.
I have the same problem...
I have the same problem, i can't sync with my pc. it only shows a balloon that said "Unrecognized Device". I can not find the usb to pc box to be checked... pls help me. thank you
I have tried to find the pc to usb tab but I just can´t find it. I am running a swedish version of wm 5, but it still should be under connections. But it isn´t.
Please note that with the "old" notebock, with vista too, i have use the Hermes without problem.
Just connect via usb and all works fine.
Now with the new notebock (same os (wm6.0 in ppc, and vista home in the notebock)) i have problems.
Vista dont recognize hermes.
so i cant connect ppc to notebock.
Some ona have idea how can i do a connection and a sync with vista.
Ps
i have install the wmdc but dosent works.
Please help.
pps
i have try to unceck enable advanced network funcionality, but when i do this i receive this error:
Fallied to disable RNDIS to use serial.
nobody can help me?
Damn
im going be crazy.
if i use internet sharing and conect the pda with notebook all works fine.
Pc find the rnids device and i can go to internet.
But if i try to sync the pc dont reconize the ppc...
welcom to the VISTA world
I've had nothing but issues with Vista and WM6 on my Hermes.
The few things I can suggest.
1) As you say Disable the Advanced networking....
2) Connect directly to a USB port, not through a hub.
3) Try soft-resetting your phone between connection attempts.
4) Remove associations between Vista and your phone.
I find that the first time I connect it everything's good, but on subsequent attempts it's hit and miss.
If you are using vista, there's an update for Windows Mobile software on the microsoft website.
http://www.microsoft.com/windowsmobile/devicecenter.mspx
you need to install 6.1 for it in order for WM6 to work with vista.
Cheers
nitrocell said:
If you are using vista, there's an update for Windows Mobile software on the microsoft website.
http://www.microsoft.com/windowsmobile/devicecenter.mspx
you need to install 6.1 for it in order for WM6 to work with vista.
Cheers
Click to expand...
Click to collapse
If he is using the same version of WM Device center on both computers and i am assuming he is, then i doubt it will fix the problem by downloading the latest version as i have that version installed on both my pc's.
I had the same problem, where windows just detected the device as an unknown device and therefore wouldnt let me sync.
right click on my computer and click manage, then plug in your device and see if you have any unknown devices appearing if you do right click on it and click uninstall then unplug the device and wait 10 seconds then plug it back in, this solved it for me. Although i still have to do this every so often. But at least it allows me to sync with both my pc's
Hi. Help me please! I have got x1 but i haven't got a cd. But i want to update my rom, but it is working on Active sync. The problem : my combuter doesn't know the devce, so i can't update my rom and i can't upload Wm 6.5 Please help me. Thanks
use another combuter
switch x1 in drive mode
There is absolutely no need for the original CD, i have one but i have never put in the the computer, i don't know even what's on it
I use my X1 with 2 computers, a Vista and an XP Pro, both recognized the x1 with no special drivers, activesync ok.
to update the ROM, check the X1 ROM forum here, there is a method without PC (the MicroSD method), which i use and is very fast and easy.
Does anyone know whether there are any prog that allow usb host on the xperia? I want to plug my hard drive into it w/o using a computer
It doesn't exist simply becuase xperia doesn't has the hardware to be a usb host.
so
So, thank you for all, but my problem is still. So, I've got windows xp and x1, the usb driver connect is very godd, it is working, but if i choose the Active sync the xp doesn't know the device. I don't know why. Should i have a driver or another program ? I want to update my rom and Wm 6.5. Please help
install xp sp3
remove option something about "advanced network capabilities"
install active sync
then (re)install outlook (2007)
Ethermind said:
install xp sp3
remove option something about "advanced network capabilities"
install active sync
then (re)install outlook (2007)
Click to expand...
Click to collapse
THANK YOU VERY MUCH
The problem was the active sync, I insalled it
glad to know this