Please note that with the "old" notebock, with vista too, i have use the Hermes without problem.
Just connect via usb and all works fine.
Now with the new notebock (same os (wm6.0 in ppc, and vista home in the notebock)) i have problems.
Vista dont recognize hermes.
so i cant connect ppc to notebock.
Some ona have idea how can i do a connection and a sync with vista.
Ps
i have install the wmdc but dosent works.
Please help.
pps
i have try to unceck enable advanced network funcionality, but when i do this i receive this error:
Fallied to disable RNDIS to use serial.
nobody can help me?
Damn
im going be crazy.
if i use internet sharing and conect the pda with notebook all works fine.
Pc find the rnids device and i can go to internet.
But if i try to sync the pc dont reconize the ppc...
welcom to the VISTA world
I've had nothing but issues with Vista and WM6 on my Hermes.
The few things I can suggest.
1) As you say Disable the Advanced networking....
2) Connect directly to a USB port, not through a hub.
3) Try soft-resetting your phone between connection attempts.
4) Remove associations between Vista and your phone.
I find that the first time I connect it everything's good, but on subsequent attempts it's hit and miss.
If you are using vista, there's an update for Windows Mobile software on the microsoft website.
http://www.microsoft.com/windowsmobile/devicecenter.mspx
you need to install 6.1 for it in order for WM6 to work with vista.
Cheers
nitrocell said:
If you are using vista, there's an update for Windows Mobile software on the microsoft website.
http://www.microsoft.com/windowsmobile/devicecenter.mspx
you need to install 6.1 for it in order for WM6 to work with vista.
Cheers
Click to expand...
Click to collapse
If he is using the same version of WM Device center on both computers and i am assuming he is, then i doubt it will fix the problem by downloading the latest version as i have that version installed on both my pc's.
I had the same problem, where windows just detected the device as an unknown device and therefore wouldnt let me sync.
right click on my computer and click manage, then plug in your device and see if you have any unknown devices appearing if you do right click on it and click uninstall then unplug the device and wait 10 seconds then plug it back in, this solved it for me. Although i still have to do this every so often. But at least it allows me to sync with both my pc's
Related
I have been trying to sincronize my S200 Qtek but it is impossible. I have made several hard and soft resets and tried with three different computers. I have installed 4.1, 4.2 and 4.5 beta versions of ActiveSync, but it is always the same: ActiveSync seems to turn on but no sincronization initialize when I connect my S200 to the USB port.
I have also made a format and reinstall windows XP but I can't syncronize information... please help me!
I have also tried to install "USB killer" without success...
Did you disable Win XP firewall? You have to disable it or any other firewall that may be installed.
If that solves your problem search MS site for how to authorise ActiveSync for your firewall.
Yes, in fact when I reinstalled windows I didn't install Norton because of the firewall. I have also unactivated windows firewall... but no sincronization occurrs
Maybe you could try another USB Cable? Or try to sync using Bluetooth?
Can't sync my S200 either...
Don't think it's cable because it is brand new :'(
Have you tried to upgrade to the latest activesync right after the installation of windows? (found here)
And perhaps some overactive antivirus programs can bug up syncing too sometimes. Did the installation of new hardware go well after you plug in your device?
When you plug in, did nothing happen or was there a small screen saying it was getting information from the phone? If yes, were you able to setup a connection (guest etc) and after that it didn't want to sync?
Got this issue resolved the fault was some tweaking I did... See, I use fixed IP with my router so I disabled the DHCP client service on services.msc... So activesync could't get the right adress from the prophet... Still don't know how I manage to make that assumption about this problem, but gladly I did
Hope this help other people with similar problem...
Same issue
tonimacaya said:
I have been trying to sincronize my S200 Qtek but it is impossible. I have made several hard and soft resets and tried with three different computers. I have installed 4.1, 4.2 and 4.5 beta versions of ActiveSync, but it is always the same: ActiveSync seems to turn on but no sincronization initialize when I connect my S200 to the USB port.
I have also made a format and reinstall windows XP but I can't syncronize information... please help me!
I have also tried to install "USB killer" without success...
Click to expand...
Click to collapse
Did you manage to fix your USB problem?
I need some support with the same problem.
Regards,
h
I am trying my first sync with Vista but when I connect it to PC it starts to look for some drivers. Vista doen't find theme and I can'T sync. What drivers is looking for? Ho can I sync my x7500 with Vista?
Help!
asci said:
I am trying my first sync with Vista but when I connect it to PC it starts to look for some drivers. Vista doen't find theme and I can'T sync. What drivers is looking for? Ho can I sync my x7500 with Vista?
Help!
Click to expand...
Click to collapse
are you using the beta Vista? you need to download the software call windows mobile device center.
Hi, I'm useing Vista Ultimate, no beta, and I still have MDC, but when I connect PPC Vista try to search and download some drivers without success and it doesn't allow me to sync. Previously I was using MDC with HTC P3600 with no problem...
Help
asci said:
Hi, I'm useing Vista Ultimate, no beta, and I still have MDC, but when I connect PPC Vista try to search and download some drivers without success and it doesn't allow me to sync. Previously I was using MDC with HTC P3600 with no problem...
Help
Click to expand...
Click to collapse
have you try connect your p3600 and see whether it sync?
I can't test P3600 because I gave it away. Here it is what I get when I try to sync:
I don't read your language, but based on what you've said, try checking windows update, while your athena is connected. Perhaps, there are files for you to download after you connect. I have Vista Ultimate as well, and the drivers did install when I first synced, so you should be able to have them too.
Really I dont' know what could it be. However the message window say that:
it's necessary to install GENERIC RNDIS DRIVER
What the hell!!!!
Now I'm trying under XP and I have no problem...what could it be? Any suggestion?
asci said:
Really I dont' know what could it be. However the message window say that:
it's necessary to install GENERIC RNDIS DRIVER
What the hell!!!!
Now I'm trying under XP and I have no problem...what could it be? Any suggestion?
Click to expand...
Click to collapse
I'm using Vista Business with Dopod U1000 and it runs flawlessly.
But I was getting Hell with Dopod 900 WM6 and Vista synchronization. So much problems, bugs, and inconsistencies.
Ohhh, thats what it says. Microsoft supply's in most cases generic remote NDIS drivers for at least USB, so vendors won't have to create their own specific drivers (or so I've read, anyway ). Do you run Vista 64? I've heard of 'RNDIS driver missing' issues with Vista 64. You may also want to check your startup disk you received with your Athena. I realize you use WMDC, but there may the RNDIS drivers bundled with Activesync, that you may be able to pull out. Just a thought, and other than that, I'm not sure what else to say, except look on the net. Good luck, I can only imagine how frustrating this must be for you.
Just to let you know i also run Vista Ultimate 64, and uses WMDC, the first time i connect my DOPOD U1000, it install the driver straight away without any problem, then i can start sync with no problem.
mysticbluebmw said:
Ohhh, thats what it says. Microsoft supply's in most cases generic remote NDIS drivers for at least USB, so vendors won't have to create their own specific drivers (or so I've read, anyway ). Do you run Vista 64? I've heard of 'RNDIS driver missing' issues with Vista 64. You may also want to check your startup disk you received with your Athena. I realize you use WMDC, but there may the RNDIS drivers bundled with Activesync, that you may be able to pull out. Just a thought, and other than that, I'm not sure what else to say, except look on the net. Good luck, I can only imagine how frustrating this must be for you.
Click to expand...
Click to collapse
I'm running Vista 32. About startup disk it could only install Activesync and really I can't fiugure out how to extract drivers needed. About net solution, Vista couldn't find drivers on line...
off topic question to mystic blue..
can you post your avatar as a large image?
thanks..it looks interesting your UI..
Here are a few screenshots. Using Wisbar Advance 2, Wisbar Advanced Desktop, Weather Panel, and Pocketbreeze.
UHm very very OT...please some advice about my problem related to this post will be welcome...
It seems that it cant recognize device...
I Found solution!!!
It's a WMDC bug that start to find RNDIS drivers in wrong folder. So all I had to do was to force it finding drivers in correct folder: C:/windows
Now I can sync!!!
Here it is reference...in italian
http://blog.michelecerreto.com/inde...lema-con-linstallazione-di-un-pda-asus-a636n/
Link here
Got mine working with 64bit windows vista. just deleted that file.
YOU ROCK!!!
YOU ARE THE MAN!!!! You don't have an Idea of how many hours I spend searching a solution for get my htc wizard recognized, your last comment on force the driver search on c:\windows solve my problem too...
But not also with my phone even with a lot of hardware that I can't make get recognized...
Vista seems to be a real pain in.... anyways I don't know how many research I have left but, I have two vista x32 home premiun edition computers one made by gateway and the other by samsung.
And I notice that the samsung one doesn't have any problem recognizing hardware, so I entered to the device manager to see the drivers and I notices must of them run under the 6.0.6000.16389 vista_rtm .....) version and I found that this Driver Kit it's availiable on windows connect for beta testers, so I decide to download them, lets see if this driver kit solve many issues with my gateway.
New Version WMDC 6.1 is available!
New version is available in Microsoft website,you can download freely and install!
It should solve most of the problems!
I'm using Dopod U1000 with Vista Ultimate and WMDC 6.1 without any problem!
My only concern is I'm unable to 'reflow' pdf documents using Vista!(It was very easy with Active Sync4.5 & XP)
Any idea to overcome this problem?
plz share!
dopod 595
i have dopod 595, and now i using vista ultimate 32, i cannot sync my outlook. please advice
thanks
Hello,
Just upgraded my 8525 to the latest and greatest ROM. Well ... greatest should really be within quotes!!!
I'm having 2 problems ...
#1) I cannot use my phone thru DUN. I select Internet Sharing. Disable ActiveSync on my PC. Select PC Connection as USB and Network Connection as My ISP GPRS. When I connect the USB cable, I immediately get a message box that New Hardware has been found (Generic RNDIS). Windows (XP-SP2) then prompts me to install the drivers. I click Next but it does not find them and throws an error that Drivers could not be found. I've searched the internet and HTC sites in vain, but cannot find anything that helps.
#2) When I connect my device using ActiveSync (4.5), I cannot get the device to use ActiveSync as a pass-thru for the internet. This results in any calls made to the internet to fail.
Any help would be appreciated. I'm back on the road on Tuesday and need to get this resolved.
Thanks
-- Val
http://www.microsoft.com/whdc/device/network/NDIS/rndis.mspx
also ensure:
Start> Settings > Connections > USB to PC (should be unticked)
mikechannon said:
http://www.microsoft.com/whdc/device/network/NDIS/rndis.mspx
Click to expand...
Click to collapse
Mike,
I had tried that earlier today but it did not work. I unzipped the file and pointed the "Find New Hardware" wizard to that directory location. When I click Next it searches and finally returns with "The hardware was not installed because the wizard cannot find the necessary software".
I'm confused. Aren't the Remote NDIS drivers part of the ActiveSync install? What am I missing here?
-- Val
I have exactly the same problem, and I still didn't find any solution
I have exactly the same problem, and I still didn't find any solution
I also have the same Problem but a different situation
I would like to tether with my phone which I can do with no problem on most computers. However I have a corporate laptop that I cannot install activesynch on...So i just need the driver to install when I connect my phone via USB.
So i get the same error as the guys above me...so any fix to this problem that does not involve installing activesync would be greatly appreciated.
thanks in advance
-brandon
Hi everybody,
Yesterday I had the same problem, but I resolved it.
First, install Activesync 4.5.
Second, when you plug your device and it ask you for the driver generic RNDIS driver, you can choose the place of this driver (don't choose automatic).
So point the "Find New Hardware" wizard to that directory location :
C:\Program Files\Microsoft ActiveSync\Drivers
Then Ok (or next I don't remember)! After windows'd install alone the good driver.
Enjoy your synchronization!
Bye bye
Upgrade ActiveSync
jafangie said:
Hi everybody,
Yesterday I had the same problem, but I resolved it.
First, install Activesync 4.5.
Second, when you plug your device and it ask you for the driver generic RNDIS driver, you can choose the place of this driver (don't choose automatic).
So point the "Find New Hardware" wizard to that directory location :
C:\Program Files\Microsoft ActiveSync\Drivers
Then Ok (or next I don't remember)! After windows'd install alone the good driver.
Enjoy your synchronization!
Bye bye
Click to expand...
Click to collapse
When I used ActiveSync 3.7, this version can not recognize Generic RNDIS. I’d upgrade this version into ActiveSync 4.5, its work.
cheers
[email protected]
Generic RNDIS Error for Windows 2003
Hi Guys,
I am also facing the same problem but I am using windows 2003 server.
I am using HTC Touch phone. Please help me out with some solutions.
Thanks
Murali €N
I had this same problem with my HTC Touch Cruise. Here's what solved it:
Go to Settings > Connections > USB to PC
Uncheck Enable advanced network functionality
Then the computer sees your mobile and sync begins (at least for me).
Something worth trying...
If you look at the driver settings for "Windows Mobile Device" under WinXP it shows a file called:
C:\WINDOWS\system32\drivers\rndismpx.sys
I'm wondering if the rndismpx.sys file is all one needs to use to install the driver so that WinXP will see the WM phone as a viable device and therefore allow you to use it's Internet Connection Sharing function to give the PC a data connection to the net?
superswade said:
If you look at the driver settings for "Windows Mobile Device" under WinXP it shows a file called:
C:\WINDOWS\system32\drivers\rndismpx.sys
I'm wondering if the rndismpx.sys file is all one needs to use to install the driver so that WinXP will see the WM phone as a viable device and therefore allow you to use it's Internet Connection Sharing function to give the PC a data connection to the net?
Click to expand...
Click to collapse
Ok I too had this problem, and refuse to use active sync as it always muck up my special clock settings. This is what fixed it for me.
As i DO have active sync installed on my desktop system, and taking the advice of the persom who posted above, i just copied the "DRIVERS" folder onto a disk (From \Programme files\Microsoft Activesync), took that to the laptop i needed to install on, and installed the driver manually, pointing to the DRIVERS folder on th CD i just made. All installed, and "Pinging" nicely!
rbrychckn said:
I had this same problem with my HTC Touch Cruise. Here's what solved it:
Go to Settings > Connections > USB to PC
Uncheck Enable advanced network functionality
Then the computer sees your mobile and sync begins (at least for me).
Click to expand...
Click to collapse
I done what you say and that works strait away thank you
pls hlp me
i have kais100 lock to at&t
R 1.27.14.09
G 22.45.88.07H
D 1.62.00.00
PLS HLP ME ............
rbrychckn way is work for me.
the messege "generic rndis himalaya" not appears again ...
the driver seems smooth installed on my windows millenium.
..... but i still CAN NOT make syncronise ....
I use XDA II Himalaya WM5 ..
on my Old Windows Milenium,
MS Active Synck 3.8 (latest version that support by windows milenium)
any idea ? thnks indeed
Go to Settings > Connections > USB to PC
Uncheck Enable advanced network functionality
Then the computer sees your mobile and sync begins (at least for me).
Click to expand...
Click to collapse
Yep, that did the trick for me. And this was after spending two hours on live chat with AT&T which was useless.
Thanks. Who knows how long I would have been dinking along looking for a clue.
Judy
rbrychckn said:
I had this same problem with my HTC Touch Cruise. Here's what solved it:
Go to Settings > Connections > USB to PC
Uncheck Enable advanced network functionality
Then the computer sees your mobile and sync begins (at least for me).
Click to expand...
Click to collapse
I have AT&T HTC Fuze and had problem in "generic RNDIS" installation, but when I Unckheced "Enable advanced network functionality" I am able to connect my HTC Fuze to my computer through Active Sync
If you're having problems syncing with Windows 7 RC1, try the steps in this article.
jafangie said:
Hi everybody,
Yesterday I had the same problem, but I resolved it.
First, install Activesync 4.5.
Second, when you plug your device and it ask you for the driver generic RNDIS driver, you can choose the place of this driver (don't choose automatic).
So point the "Find New Hardware" wizard to that directory location :
C:\Program Files\Microsoft ActiveSync\Drivers
Then Ok (or next I don't remember)! After windows'd install alone the good driver.
Enjoy your synchronization!
Bye bye
Click to expand...
Click to collapse
This worked perfectly! (Sprint tp2 w/ XP SP3)
Aielman said:
If you're having problems syncing with Windows 7 RC1, try the steps in this article.
Click to expand...
Click to collapse
This wasn't even the least bit helpful.
The article just tells you to install ActiveSync or WMDC.
I'm having sam problem with windows 7 64bit, and couldn't find solition, can t upgrade my rom...
Could some1 explain me how the sync procedure works in Vista?
Do I need to install any software or is the sync sw already included in Vista?
I have downloaded the new version of AS for Vista, at least I think.... And now I have the usual AS icon in the taskbar, but if I plug in the device nothing happens. I have to go into Control panel and then run Mobile something (sorry I am writing from the office so dont remebmer) to have Vista connect succesfully with the device.
Thanks
re
thegios said:
Could some1 explain me how the sync procedure works in Vista?
Do I need to install any software or is the sync sw already included in Vista?
I have downloaded the new version of AS for Vista, at least I think.... And now I have the usual AS icon in the taskbar, but if I plug in the device nothing happens. I have to go into Control panel and then run Mobile something (sorry I am writing from the office so dont remebmer) to have Vista connect succesfully with the device.
Thanks
Click to expand...
Click to collapse
If not already have "windows mobile device centre" then download it newer version is 6.1 as i remember .. i had problem with connectivity .. turn off the fire wall .. it will connect
sahir74 said:
If not already have "windows mobile device centre" then download it newer version is 6.1 as i remember .. i had problem with connectivity .. turn off the fire wall .. it will connect
Click to expand...
Click to collapse
this is exactly what I installed: mobile device center 6.1
problem is that while with xp+active sync it was enough to connect the devoce to the usb and sync would start automatically, now after connecting I have to run the device center manually
try and get the latest version of wmdc, see if it helps
Try this http://www.microsoft.com/downloads/...f1-e46a-4a5f-a791-09f07aaa1914&displaylang=en
Hi. Help me please! I have got x1 but i haven't got a cd. But i want to update my rom, but it is working on Active sync. The problem : my combuter doesn't know the devce, so i can't update my rom and i can't upload Wm 6.5 Please help me. Thanks
use another combuter
switch x1 in drive mode
There is absolutely no need for the original CD, i have one but i have never put in the the computer, i don't know even what's on it
I use my X1 with 2 computers, a Vista and an XP Pro, both recognized the x1 with no special drivers, activesync ok.
to update the ROM, check the X1 ROM forum here, there is a method without PC (the MicroSD method), which i use and is very fast and easy.
Does anyone know whether there are any prog that allow usb host on the xperia? I want to plug my hard drive into it w/o using a computer
It doesn't exist simply becuase xperia doesn't has the hardware to be a usb host.
so
So, thank you for all, but my problem is still. So, I've got windows xp and x1, the usb driver connect is very godd, it is working, but if i choose the Active sync the xp doesn't know the device. I don't know why. Should i have a driver or another program ? I want to update my rom and Wm 6.5. Please help
install xp sp3
remove option something about "advanced network capabilities"
install active sync
then (re)install outlook (2007)
Ethermind said:
install xp sp3
remove option something about "advanced network capabilities"
install active sync
then (re)install outlook (2007)
Click to expand...
Click to collapse
THANK YOU VERY MUCH
The problem was the active sync, I insalled it
glad to know this