I have the following problem and I hope someone can help me with it.
After installing a big storage rom on my MDA ande have difficulties with connecting to my Parrot CK3000 with bluetooth. After giving the pass key the voice keeps saying "memory fault"
Connecting to a bluetooth GPS reciever is not a problem.
Big storage information
ROM version : 1.12.00 WWE
Radio version : 1.12.00
Does anybody knows how to solve this problem.
Hi,
if the problem still exist, try to reset the ck3000. press and hold the red and green key for few seconds.
Regards Yoshi
hello everyone,
I recently bought a locked Qtek 9100 (SPV M3000/HTC Wizard) and I was trying to unlock it using lokiwiz v0.2. It went through all the steps without any problem, but one... it was still sim locked!
Maybe because my phone is a new version, as it had Feb 06 as its original date... I don't really have any clue.
As this didn't work, I tried to find out in Google if I could find any unlocking code, even if I had to pay 30 euros for it, as that free tool didn't work it out for me.
I used www.gsmliberty.net, paid for it, followed all their instructions - again, everything went perfect - and in the end... ... my phone is not working anymore!... It doesn't even get to the Windows Mobile Logo...
It shows HTC logo and the provider logo, but then reboots and keeps going on this cycle as long as the battery lasts.
I've tried to hard reset, but it stays all the same! I do everything as I have found out in every forum that has some information about it, and it still can't get out of this rebooting cycle...
Can anyone help me on this?
I fear that it had some kind of advanced protection against known unlocking tools and now its ruined for good
Please tell me that we can work this out! The phone was working perfectly before, when I inserted a SIM card that it allowed (from the phone's provider...)
Any help will be most welcome!
Cheers
Sorry to hear of your problems. Please tell me the details of the rom including the ipl and spl numbers. Is the rom a qtek one? - your post is confusing.
I would try reflashing the device with the original rom as the format has failed to do anything.
Download rom from here ftp://[email protected]/Wizard/Roms/Qtek/ password is xda.
To get to the bootloader screen to do this, turn off your device then press and hold camera button and then power on. You should then reach the multicolored bootloader screen. Connect to pc using usb cable and you should see usb in bottom left of screen. (the device does not need to be activesynced to flash rom) then start exe on pc and the device will reflash.
meschle said:
Sorry to hear of your problems. Please tell me the details of the rom including the ipl and spl numbers. Is the rom a qtek one? - your post is confusing.
I would try reflashing the device with the original rom as the format has failed to do anything.
Download rom from here ftp://[email protected]/Wizard/Roms/Qtek/ password is xda.
To get to the bootloader screen to do this, turn off your device then press and hold camera button and then power on. You should then reach the multicolored bootloader screen. Connect to pc using usb cable and you should see usb in bottom left of screen. (the device does not need to be activesynced to flash rom) then start exe on pc and the device will reflash.
Click to expand...
Click to collapse
Thank you for your help!
My ROM version is: 2.18.7.2 PTG (15 FeB 06)
IPL: 2.18
SPL: 2.18
I also have this numbers, which I wrote down before the phone got ruined...
Radio Version: 02.10.10
Protocol Version: 413.1.03
ExtROM: 2.18.7.9161
Which of the files in that FTP should I download?...
Looks like your rom is portugese so this will be the one
ftp://[email protected]/Wi...digy_2180702_21807102_20710_QTEK_PTG_Ship.exe
Perfect! Didn't want to do anything wrong this time.
I'll do it tonight, when I get home. Hopefully this will turn it around for me...
I'll let you know.
The least I can do is to say THANK YOU!
You have no idea of how much you can to to make the world a better place.
Thank you so much!
If there's anything I can help this forum in, please do let me know, I'll be glad if I can somehow pay back this enormous piece of advice.
hveiga said:
The least I can do is to say THANK YOU!
You have no idea of how much you can to to make the world a better place.
Thank you so much!
If there's anything I can help this forum in, please do let me know, I'll be glad if I can somehow pay back this enormous piece of advice.
Click to expand...
Click to collapse
No problem glad you got it sorted. I like to help (this is what this FORUM is for) and would hope that it does make a difference. Best way you can help is learn, learn, learn and then help, help, help others. The helpers in the forum seem to come and go so i suppose there is a shortage, most come for info and advice. I enjoy posting helps me relax lol thats why i have over 1000 posts - must be well chilled out by now :wink:
btw do other sims work in your device now - if not ask for your money back!
dun know
hi guys i need help here i'm using spv m3000 with french langueage
i did follow as what told in this part (Download rom from here ftp://[email protected]/Wizard/Roms/Qtek/ password is xda.
To get to the bootloader screen to do this, turn off your device then press and hold camera button and then power on. You should then reach the multicolored bootloader screen. Connect to pc using usb cable and you should see usb in bottom left of screen. (the device does not need to be activesynced to flash rom) then start exe on pc and the device will reflash.)
one thing i dun get is what is exe and where to find please help me
my ipl is 1.03
spl 1.03.0000
os 1.3.1.4
exe is the RUU (RomUpdate Utility) icon in the Rom you downloaded,just run the RUU,it'll start to flash.
hi thanks for ur info i did try to flah the rom ruu but it cannot
flash the rom is there anything else i forget to do /
i did follow all the instrution where i can get the upgrade rom for french version for this pda phone
btw i'm using window vista
chanra said:
hi thanks for ur info i did try to flah the rom ruu but it cannot
flash the rom is there anything else i forget to do /
i did follow all the instrution where i can get the upgrade rom for french version for this pda phone
btw i'm using window vista
Click to expand...
Click to collapse
Vista is still not compatible for flashing,use winXP,its highly recommended and doen't give any problems.
hi thanks alot for info
i did flash wt english rom i use as what u told ( winxp)
thanks alot i wont forget ur help
(zabardast_1)
chanra said:
hi thanks alot for info
i did flash wt english rom i use as what u told ( winxp)
thanks alot i wont forget ur help
(zabardast_1)
Click to expand...
Click to collapse
Thanz!
It was my pleasure to help you,glad you got it working
I have problem n unlocking M3000
I have problem in unlocking SPV M3000.
IPL 2.16
SPL 2.16
meschle said:
Looks like your rom is portugese so this will be the one
ftp://[email protected]/Wi...digy_2180702_21807102_20710_QTEK_PTG_Ship.exe
Click to expand...
Click to collapse
i try to download from link but ask for FTP pass !? what is ?
Hi am new here,
can i updat my device ?
i like to improve the GUI of my pocket pc ,ist possible?
now my device running wm 5 ,can i updat for wm 6?
my device is Qtek wizard200
and more as follows.
suggest me ...thank u
22/09/09 12:02:51
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: .................
=> Bootloaders:
IPL: 2.18.0001 (G4 device)
SPL: 2.18.0001 (G4 device)
Built on Feb 14 2006 at 18:47:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
8fb7d682 - 60.63M (0x3ca0000)
ee9e4266 - 9.99M (0x9fd800)
4ea9d13a - 43.24M (0x2b3e000)
cfb25f96 - 50.95M (0x32f4000)
4fb25f42 - 2.94M (0x2f0000)
0fb25fba - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000813902052e1c1780140406da
Key Index: 82
qtek wizard upadting
Hi am new here,
can i updat my device ?
i like to improve the GUI of my pocket pc ,ist possible?
now my device running wm 5 ,can i updat for wm 6?
my device is Qtek wizard200
and more as follows.
suggest me ...thank u
22/09/09 12:02:51
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: .................
=> Bootloaders:
IPL: 2.18.0001 (G4 device)
SPL: 2.18.0001 (G4 device)
Built on Feb 14 2006 at 18:47:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
8fb7d682 - 60.63M (0x3ca0000)
ee9e4266 - 9.99M (0x9fd800)
4ea9d13a - 43.24M (0x2b3e000)
cfb25f96 - 50.95M (0x32f4000)
4fb25f42 - 2.94M (0x2f0000)
0fb25fba - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000813902052e1c1780140406da
Key Index: 82
Hello.
I have a big problem with my BT in MDA 2 ... When i do a hard reset, after start of WM2003SE BT icon have a red line on itself. When I tap this Icon I can see error message: "There is no Bluetooth hardware installed on this device." and every field is grey....
Is there a driver which can fix it ?
Regards, Bartek
/edit: I saw reply about registry fix, but i don't have any backup And I can't take this registry key ... Can sb help me ?
kijan said:
Hello.
I have a big problem with my BT in MDA 2 ... When i do a hard reset, after start of WM2003SE BT icon have a red line on itself. When I tap this Icon I can see error message: "There is no Bluetooth hardware installed on this device." and every field is grey....
Is there a driver which can fix it ?
Regards, Bartek
Click to expand...
Click to collapse
It seems that the BT driver wasn't loaded properly! Can you check?
Are you sure, you didn't change anything in the registry?
Which BT stack are you using?
Hi ... But can You tell me how can I check it ? I'm really "green" in MDA & PPC .. But BT don't work even I do a Hard Reset ... I've bought this model yesterday and I can't tell anything about it's history ...
kijan said:
Hi ... But can You tell me how can I check it ? I'm really "green" in MDA & PPC .. But BT don't work even I do a Hard Reset ... I've bought this model yesterday and I can't tell anything about it's history ...
Click to expand...
Click to collapse
Huch! This will be difficult indeed...
Ok, let's start!
1) Go in Settings/System, click on Device Information and give me what you have on the version tab.
2) Go In Windows directory and search for a file called ASIC5_BTUR.dll
OK.
1.Version:
ROM Version: 2.06.00WWE
ROM date: 06/14/04
Radio Version: 1.18.00
Protocol Version: 1337.38
ExtROM version : (blank)
2. Don't have this DLL
/sorry about time when I'm responding...
kijan said:
OK.
1.Version:
ROM Version: 2.06.00WWE
ROM date: 06/14/04
Radio Version: 1.18.00
Protocol Version: 1337.38
ExtROM version : (blank)
2. Don't have this DLL
/sorry about time when I'm responding...
Click to expand...
Click to collapse
If you use fileexplorer to show files, don't forget to select show all files option. then make a search on ASIC5_BTUR
If you don't have it, well you need to reinstall it or think about upgrading your pda to WM2005
Cheers,
.Fred
Hi.
I want to upgrade my equipment to WM6 but i don´t know how to.
I´m a newbie so all the help are welcome.
The ROM version is : 1.30.77 WWE
ROM date : 02/20/2006.....
Radio version : 0.00.00 ( isn´t this strange ? )
Protocol version : 42.37.P8
ExtROM : 1.30.9010
That´s my device information above so what i have to do?
Where i can find a ROM that fully supports WM6 and of course that´s compatible with all functions that my phone has ( videocall for example ).
Many thanks to you all.
Regards from Portugal.
HI!
I asume that you have an UNIVERSAL (JasJar, qtek 9000...)
-1 download the ROM that you want.
-2 press light button + power button and then reset device.
-3 go to Activesync's connections settings and then UNcheck "allow USB connections".
-4 connect your device to you computer with USB cable (of course) and then double click (in the rom that you download) in "ROMUpgradeUt.exe" or "MaUpgradeUt_noID.exe" (this one is better).
Follow the instructions ok?
The WM6 have trouble with videocall in this device and have a lot of bugs but you can test this one: http://forum.xda-developers.com/showthread.php?t=312519
I hope this help but search in the forum because this threat is solved already...
I have this X01HT that my sister gave me. I was able to change the language using the following.
RUU_HERMES_HTC_WWE_1_1_.35.255.2_1.35.255.102_1.08.00.10_SHIP
SSPL-HERM
I think this is Windows Mobile 5. I want now to upgrade it Windows Mobile 6. I found these 2 files here.
HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108
Schaps_WM6Pro_WWE_4.01_Full
Below is my Device Information.
ROM Version: 1.35.255.2
ROM Date: 11/14/2006
Radio Version: 1.14.01.10
Protocol Version: 32.50.7018.00H
ExtROM Version: 1.35.255.102
When I run SSPL-HERM (the one I downloaded from this forum), I got the following details below.
HERM200
IPL-SSPL by Des
HERM200
SPL-1.09.ds
When I press POWER button on the right side and OK button on the left side, I get the details below.
HERM200
IPL-1.01
HERM200
SPL-1.40.Olipro
Questions:
1. What ROM shall I use to upgrade to Windows Mobile 6 (HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108 or Schaps_WM6Pro_WWE_4.01_Full)?
2. Shall I use the SSPL-HERM that I downloaded from this forum to enter into bootloader or shall I press at the same time the POWER button and OK button?
3. How can I upgrade my Radio Version?
4. What other enhancement I can do with my X01HT?
5. Can someone help me unlock my X01HT? I tried using HTC_Hermes_SIM_CID_Unlock_v3a but no luck. Is there another way to do it without paying?
Hope to hear from all the experts here.
Thanks!