Related
hello forum,
i really hope there is someone out there that knows enough to help me.i have already posted here on the forum a few days ago since my phone on a o2 xda is not working anymore after a recent upgrade.There are also several bugs and problem and the device crashes in some occasions (i.e when i tap the volume button).
i decided to try to downgrade to a previous official version directly downloaded from the o2 web site.I t is the version 3.17.
LOOK WHAT HAPPEN WHEN I TRY TO INSTALL IT.
It cames up this error 012: check error:
The ROM image that you are trying to upgrade is not compatible to your pocket pc.
Here are the differences:
Your device information:
Model: PW10B1
ROM version: 4.00
Language: English
Your upgraded image information:
Model: PW10A1
ROM version: 3.17
Language: English
Please download the compatible utility and try again.
genius...gimme a sign!!! :roll:
emm053 said:
Your device information:
Model: PW10B1
ROM version: 4.00
Language: English
Your upgraded image information:
Model: PW10A1
ROM version: 3.17
Language: English
Click to expand...
Click to collapse
It looks like you installed a 4.00.10 or 4.00.16 ROM from the kitchen. You will need to use the bootloader method before you're able to get back to something else.
Cook a 3.17.03 ROM in the ROMkitchen, and get it as a zipped .nb1 file. Also get the XDAtools and run that exe file. Insert an SD-card (whose contents you do not care about) in the XDA and stick it in the cradle. Then right-click on the .nb1 file from the zip, select to write it to SD-card. Wait for that to finish (the indication of that isn't all too clear yet). Then restart the XDA in bootloader mode by holding the power button while performing a soft-reset (big hole on the bottom). Then hit the center of the rocker keypad when it asks you to press 'Action', wait for the counter to finish, and you're all set.
You're life will be slightly easier if, next time you upgrade, you stay away from T-Mobile ROMs.
hello everyone,
I recently bought a locked Qtek 9100 (SPV M3000/HTC Wizard) and I was trying to unlock it using lokiwiz v0.2. It went through all the steps without any problem, but one... it was still sim locked!
Maybe because my phone is a new version, as it had Feb 06 as its original date... I don't really have any clue.
As this didn't work, I tried to find out in Google if I could find any unlocking code, even if I had to pay 30 euros for it, as that free tool didn't work it out for me.
I used www.gsmliberty.net, paid for it, followed all their instructions - again, everything went perfect - and in the end... ... my phone is not working anymore!... It doesn't even get to the Windows Mobile Logo...
It shows HTC logo and the provider logo, but then reboots and keeps going on this cycle as long as the battery lasts.
I've tried to hard reset, but it stays all the same! I do everything as I have found out in every forum that has some information about it, and it still can't get out of this rebooting cycle...
Can anyone help me on this?
I fear that it had some kind of advanced protection against known unlocking tools and now its ruined for good
Please tell me that we can work this out! The phone was working perfectly before, when I inserted a SIM card that it allowed (from the phone's provider...)
Any help will be most welcome!
Cheers
Sorry to hear of your problems. Please tell me the details of the rom including the ipl and spl numbers. Is the rom a qtek one? - your post is confusing.
I would try reflashing the device with the original rom as the format has failed to do anything.
Download rom from here ftp://[email protected]/Wizard/Roms/Qtek/ password is xda.
To get to the bootloader screen to do this, turn off your device then press and hold camera button and then power on. You should then reach the multicolored bootloader screen. Connect to pc using usb cable and you should see usb in bottom left of screen. (the device does not need to be activesynced to flash rom) then start exe on pc and the device will reflash.
meschle said:
Sorry to hear of your problems. Please tell me the details of the rom including the ipl and spl numbers. Is the rom a qtek one? - your post is confusing.
I would try reflashing the device with the original rom as the format has failed to do anything.
Download rom from here ftp://[email protected]/Wizard/Roms/Qtek/ password is xda.
To get to the bootloader screen to do this, turn off your device then press and hold camera button and then power on. You should then reach the multicolored bootloader screen. Connect to pc using usb cable and you should see usb in bottom left of screen. (the device does not need to be activesynced to flash rom) then start exe on pc and the device will reflash.
Click to expand...
Click to collapse
Thank you for your help!
My ROM version is: 2.18.7.2 PTG (15 FeB 06)
IPL: 2.18
SPL: 2.18
I also have this numbers, which I wrote down before the phone got ruined...
Radio Version: 02.10.10
Protocol Version: 413.1.03
ExtROM: 2.18.7.9161
Which of the files in that FTP should I download?...
Looks like your rom is portugese so this will be the one
ftp://[email protected]/Wi...digy_2180702_21807102_20710_QTEK_PTG_Ship.exe
Perfect! Didn't want to do anything wrong this time.
I'll do it tonight, when I get home. Hopefully this will turn it around for me...
I'll let you know.
The least I can do is to say THANK YOU!
You have no idea of how much you can to to make the world a better place.
Thank you so much!
If there's anything I can help this forum in, please do let me know, I'll be glad if I can somehow pay back this enormous piece of advice.
hveiga said:
The least I can do is to say THANK YOU!
You have no idea of how much you can to to make the world a better place.
Thank you so much!
If there's anything I can help this forum in, please do let me know, I'll be glad if I can somehow pay back this enormous piece of advice.
Click to expand...
Click to collapse
No problem glad you got it sorted. I like to help (this is what this FORUM is for) and would hope that it does make a difference. Best way you can help is learn, learn, learn and then help, help, help others. The helpers in the forum seem to come and go so i suppose there is a shortage, most come for info and advice. I enjoy posting helps me relax lol thats why i have over 1000 posts - must be well chilled out by now :wink:
btw do other sims work in your device now - if not ask for your money back!
dun know
hi guys i need help here i'm using spv m3000 with french langueage
i did follow as what told in this part (Download rom from here ftp://[email protected]/Wizard/Roms/Qtek/ password is xda.
To get to the bootloader screen to do this, turn off your device then press and hold camera button and then power on. You should then reach the multicolored bootloader screen. Connect to pc using usb cable and you should see usb in bottom left of screen. (the device does not need to be activesynced to flash rom) then start exe on pc and the device will reflash.)
one thing i dun get is what is exe and where to find please help me
my ipl is 1.03
spl 1.03.0000
os 1.3.1.4
exe is the RUU (RomUpdate Utility) icon in the Rom you downloaded,just run the RUU,it'll start to flash.
hi thanks for ur info i did try to flah the rom ruu but it cannot
flash the rom is there anything else i forget to do /
i did follow all the instrution where i can get the upgrade rom for french version for this pda phone
btw i'm using window vista
chanra said:
hi thanks for ur info i did try to flah the rom ruu but it cannot
flash the rom is there anything else i forget to do /
i did follow all the instrution where i can get the upgrade rom for french version for this pda phone
btw i'm using window vista
Click to expand...
Click to collapse
Vista is still not compatible for flashing,use winXP,its highly recommended and doen't give any problems.
hi thanks alot for info
i did flash wt english rom i use as what u told ( winxp)
thanks alot i wont forget ur help
(zabardast_1)
chanra said:
hi thanks alot for info
i did flash wt english rom i use as what u told ( winxp)
thanks alot i wont forget ur help
(zabardast_1)
Click to expand...
Click to collapse
Thanz!
It was my pleasure to help you,glad you got it working
I have problem n unlocking M3000
I have problem in unlocking SPV M3000.
IPL 2.16
SPL 2.16
meschle said:
Looks like your rom is portugese so this will be the one
ftp://[email protected]/Wi...digy_2180702_21807102_20710_QTEK_PTG_Ship.exe
Click to expand...
Click to collapse
i try to download from link but ask for FTP pass !? what is ?
Hi am new here,
can i updat my device ?
i like to improve the GUI of my pocket pc ,ist possible?
now my device running wm 5 ,can i updat for wm 6?
my device is Qtek wizard200
and more as follows.
suggest me ...thank u
22/09/09 12:02:51
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: .................
=> Bootloaders:
IPL: 2.18.0001 (G4 device)
SPL: 2.18.0001 (G4 device)
Built on Feb 14 2006 at 18:47:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
8fb7d682 - 60.63M (0x3ca0000)
ee9e4266 - 9.99M (0x9fd800)
4ea9d13a - 43.24M (0x2b3e000)
cfb25f96 - 50.95M (0x32f4000)
4fb25f42 - 2.94M (0x2f0000)
0fb25fba - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000813902052e1c1780140406da
Key Index: 82
qtek wizard upadting
Hi am new here,
can i updat my device ?
i like to improve the GUI of my pocket pc ,ist possible?
now my device running wm 5 ,can i updat for wm 6?
my device is Qtek wizard200
and more as follows.
suggest me ...thank u
22/09/09 12:02:51
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: .................
=> Bootloaders:
IPL: 2.18.0001 (G4 device)
SPL: 2.18.0001 (G4 device)
Built on Feb 14 2006 at 18:47:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
8fb7d682 - 60.63M (0x3ca0000)
ee9e4266 - 9.99M (0x9fd800)
4ea9d13a - 43.24M (0x2b3e000)
cfb25f96 - 50.95M (0x32f4000)
4fb25f42 - 2.94M (0x2f0000)
0fb25fba - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000813902052e1c1780140406da
Key Index: 82
Just got a new XDA...
Are there certain things that you can delete...progs/apps that are just rubbish that would free up memory..increase speed of device?
EG I am not going to use Powerpoint...
Its come from O2 so am not sure if they have put any crap on it?
I highly recommend hard resetting it and installing in corporate mode. It will certainly help remove all the O2 preinstalled software.
XDA from O2
Me too bought XDA from O2. I would also like to get my device faster. How do I upgrade it? I've been looking at this: http://forum.xda-developers.com/showthread.php?t=310109 and there http://vidmes.com/Uni/ROMs/Laurentius26_UNI_RV3.rar
and this http://forum.xda-developers.com/showthread.php?t=306552: "Windows Mobile 6 Professional - Midget_1990 v1.0".
BUT there is always something of "Hard Reset": press RESET-button + "--" buttons and "Soft Reset": press RESET-button. Unfortunately, these commands do not work on my XDA. Thus, i cannot even use Wallaby bootloader mode: "press and hold the on/off key and then soft-reset the device" as i cannot perform Soft Reset!
So i cannot upgrade my device? Is there some other way to reset my settings to upgrade my device? I have performed "Clear Storage" and it works but does it help with upgrading ROM?
Thanks in advance.
...
Qtek 9000 / Universal
ROM version: 1.13.82 WWE
Radio version: 1.04.02
Protocol version: 42.37.P8
Hi to all. I'm a new person in this fantastic forum. Before yesterday i'm just visiting and reading, but now i need your help
So, I have a Wizard with T-mobile logo on it. Display has been changed, 'cause the original was broken. New display has been buyed from *-bay. Both displays are the same. When put the new display in the Wizard, everything looks fine, except the 8-bit color on the skreen ;( . Last night i read and make step by step things in this Thread: http://forum.xda-developers.com/showthread.php?t=298613 , but i need to stop on step G3.4 - i have a success update from step G3.3 with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE, but when i start the Wizard_Love_2.26.10.2_WWE_Novii_CF2, there is an error - 206 (on italian).
After that, i have read the http://forum.xda-developers.com/showthread.php?t=285435 thread, and started again... First update has been successfull (maybe), the Wizard started with Winmobile 5 (WM6 has been installed before starting updates).
That's the specs:
ipl: 1.01
spl: 1.01
rom date 2/02/07
radio: 01.12.10
rom version: 6.0.0.0 wwe
protokol version: 4.0.13.23
extRom version: Empty Extended (before updating)
Now, after 1st update are:
ipl: 1.01
spl: 1.01
ROM:1.5.4.2 WWE
ROM date: 11/8/05
Radio: 01.12.10
Protocol version: 4.0.12.23
------------------------------------------------------------------------
And now... i haven't idea what to do to update IPL and SPL to version 2.xx
and to install WM6 (XDA Mobile 6 Release 3).
Else, I think that the screen has only 8bit color is not a software problem. I think it's from hardware (display).
Else, i have install ActiveSync, but the program did not find any Wizard attached to the computer..
For first update, i connect and started wizard in bootable mode (3 color display, with 'usb' icon down left...
After restart, when starts normally, AS 4.5 didn't find it...
Can somebody explain me in a few simple steps what to do...
Please..
I'm new in this sphere. Sorry for my bad english.
Have a nice weekend to all.
Here -> http://www.snimka.bg/album.php?album_id=234481 <- are 3 pictures from wizard. 8bit color loooooks very very badd
Lattante said:
Hi to all. I'm a new person in this fantastic forum. Before yesterday i'm just visiting and reading, but now i need your help
So, I have a Wizard with T-mobile logo on it. Display has been changed, 'cause the original was broken. New display has been buyed from *-bay. Both displays are the same. When put the new display in the Wizard, everything looks fine, except the 8-bit color on the skreen ;( . Last night i read and make step by step things in this Thread: http://forum.xda-developers.com/showthread.php?t=298613 , but i need to stop on step G3.4 - i have a success update from step G3.3 with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE, but when i start the Wizard_Love_2.26.10.2_WWE_Novii_CF2, there is an error - 206 (on italian).
After that, i have read the http://forum.xda-developers.com/showthread.php?t=285435 thread, and started again... First update has been successfull (maybe), the Wizard started with Winmobile 5 (WM6 has been installed before starting updates).
That's the specs:
ipl: 1.01
spl: 1.01
rom date 2/02/07
radio: 01.12.10
rom version: 6.0.0.0 wwe
protokol version: 4.0.13.23
extRom version: Empty Extended (before updating)
Now, after 1st update are:
ipl: 1.01
spl: 1.01
ROM:1.5.4.2 WWE
ROM date: 11/8/05
Radio: 01.12.10
Protocol version: 4.0.12.23
------------------------------------------------------------------------
And now... i haven't idea what to do to update IPL and SPL to version 2.xx
and to install WM6 (XDA Mobile 6 Release 3).
Else, I think that the screen has only 8bit color is not a software problem. I think it's from hardware (display).
Else, i have install ActiveSync, but the program did not find any Wizard attached to the computer..
For first update, i connect and started wizard in bootable mode (3 color display, with 'usb' icon down left...
After restart, when starts normally, AS 4.5 didn't find it...
Can somebody explain me in a few simple steps what to do...
Please..
I'm new in this sphere. Sorry for my bad english.
Have a nice weekend to all.
Here -> http://www.snimka.bg/album.php?album_id=234481 <- are 3 pictures from wizard. 8bit color loooooks very very badd
Click to expand...
Click to collapse
You have downgraded your phone to IPL/SPL 1.xx by flashing Button's Rom 1.05.there's no need to flash wizard_love_Rom,instead download and apply lokiwiz02b tool to SIM/CID unlock the phone and then download T-mobile 2.26 and flash to upgrade to IPL/SPL 2.xx for upgrading to wm6.The above guide was written quite a while ago,its better you follow the most updated guide as in the link below:-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Thanks a lot zabardast_1, but I have 1 problem - Activesync didn't find any Pocket, attached to the computer, so i can't make the steps in the tutorial.. the pocket is SIM unlocked.
Lattante said:
Thanks a lot zabardast_1, but I have 1 problem - Activesync didn't find any Pocket, attached to the computer, so i can't make the steps in the tutorial.. the pocket is SIM unlocked.
Click to expand...
Click to collapse
Is your phone working normal,does it load up to OS ? to check the connectivity,get the phone into bootloaders(tricolor screen) connect via usb cable and check if usb appears at the bottom of the bootloaders,if not then there's a connectivity problem,either with usb cable or the mini usb port of the phone.
if the phone works normal and loads OS,then you can even try to use lokiwiz02b or WST tool via BT and CID unlock the phone.
It's normal working, like I said in my 1st post - 8bit color. I think it's from OS, but i'm not sure - i have downgrade form WM6 to WM5, and the problem is still here .
In bootload mode have indication for USB - bottom left on the screen, the battery has charging, but ActiveSync still don't want to find my Wizard..
P.S. Pfffff, I decline to fight with that.... Monday i'll test with other USB cable. Even it charging battery, i think ActiveSync can't recognize the Wizard, because USB cable is failed somewhere,...
I don't know what i think.. I'm tired.... Good night..
If its working normal and it establishes connectivity through usb as it appears in the bootloaders,then,its the AS software,which is not detecting.Assuming you are using winXP,Delete all partnerships/profiles in the settings of the AS or Uninstall As and download the latest version 4.5 and install it,close any Antivirus/Firewall or any other software which might be hindering with AS and let it again activesync.Also remember to uncheck 'Enable advanced network functionality' in the settings...> connections...> usb to pc options in your phone.
Hello again. I try to install 3 versions of AS, but the result is the same - No Connection. reset the wizard 3 times, stop all running software - ICQ, Skype, antivirus, browser... no and no.
When AS looking for device, there is 7 8 COM ports, Infrared (no installed), USB available, but AS can't find my bluetooth...
I have install bluetooth, and make connection with the wizard, but i can't unlock with lokiwiz02b-HTC Unlocker.
Better try on other winXP based pc
I think so, tommorow at work zabardast_1 thanks a lot man.
Hi all.
I start by contemplating the fact that there are quite some portuguese members arround.
Força Portugal
I just got hold of a O2 Xda Orbit. It has windows mobile in english and I want to put it in portuguese.
I don't know how
I have been reading about the ROM's in portuguese but I am afraid of just upgrading without knowing what I am doing.
That is why I am now requesting you guys to point me in the right direction
Device Information:
ROM Version: 3.4.206.2 WWE
ROM Date: 4/18/2007
Radio Version: 02.67.90
Protocol Version: 4.1.13.28
-
Also I don't have (yet) ActiveSync installed on my computer... do I need it?
thank you in advance...
Tiago Geada
cusco
Brief step by step plan
vigaro said:
Hi all.
<question>
ROM Version: 3.4.206.2 WWE
ROM Date: 4/18/2007
Radio Version: 02.67.90
Protocol Version: 4.1.13.28
Also I don't have (yet) ActiveSync installed on my computer... do I need it?
cusco
Click to expand...
Click to collapse
You do need ActiveSync for XP or older, or Windows Mobile Device Center for Vista (download the latest version from Microsoft).
In general you have to do the following steps:
1. Connect your Artemis to the computer using a USB cable.
2. Do NOT make a partnership. If you get a wizard or popup, just cancel/quit it.
3. obtain the rom of your choice (it sounds like you've allready found a PTG rom)
4. make sure your Artemis is CID unlocked. If not, use artemis USPL for this.
5. run RUU.exe or RomUpdateUtility.exe which is usually provided with the rom. If not, find a recent version HERE. If you use a RUU.exe not provided with your rom, just remove the old rom (a large file with the extension .nbh) and put your rom in the folder with RUU.exe
6. Follow steps on the screen. Read the information / caution rules, press next a few times, then press update.
7. The Artemis will go into boot loader mode (first a three color screen, then a grey one with a white/blue progress bar)
8. wait some time, until the wizard says you're finished
9. The Artemis will reboot. Wait for it to completely start windows, then do a hard reset (push both softkeys and the reset button, release reset button after a few seconds). This way you make sure your rom gets flashed well
10. Wait for the progress bar to end again and for windows to start
11. Start calibrating your screen and customising windows to your needs.
This should do it