hello everyone,
I recently bought a locked Qtek 9100 (SPV M3000/HTC Wizard) and I was trying to unlock it using lokiwiz v0.2. It went through all the steps without any problem, but one... it was still sim locked!
Maybe because my phone is a new version, as it had Feb 06 as its original date... I don't really have any clue.
As this didn't work, I tried to find out in Google if I could find any unlocking code, even if I had to pay 30 euros for it, as that free tool didn't work it out for me.
I used www.gsmliberty.net, paid for it, followed all their instructions - again, everything went perfect - and in the end... ... my phone is not working anymore!... It doesn't even get to the Windows Mobile Logo...
It shows HTC logo and the provider logo, but then reboots and keeps going on this cycle as long as the battery lasts.
I've tried to hard reset, but it stays all the same! I do everything as I have found out in every forum that has some information about it, and it still can't get out of this rebooting cycle...
Can anyone help me on this?
I fear that it had some kind of advanced protection against known unlocking tools and now its ruined for good
Please tell me that we can work this out! The phone was working perfectly before, when I inserted a SIM card that it allowed (from the phone's provider...)
Any help will be most welcome!
Cheers
Sorry to hear of your problems. Please tell me the details of the rom including the ipl and spl numbers. Is the rom a qtek one? - your post is confusing.
I would try reflashing the device with the original rom as the format has failed to do anything.
Download rom from here ftp://[email protected]/Wizard/Roms/Qtek/ password is xda.
To get to the bootloader screen to do this, turn off your device then press and hold camera button and then power on. You should then reach the multicolored bootloader screen. Connect to pc using usb cable and you should see usb in bottom left of screen. (the device does not need to be activesynced to flash rom) then start exe on pc and the device will reflash.
meschle said:
Sorry to hear of your problems. Please tell me the details of the rom including the ipl and spl numbers. Is the rom a qtek one? - your post is confusing.
I would try reflashing the device with the original rom as the format has failed to do anything.
Download rom from here ftp://[email protected]/Wizard/Roms/Qtek/ password is xda.
To get to the bootloader screen to do this, turn off your device then press and hold camera button and then power on. You should then reach the multicolored bootloader screen. Connect to pc using usb cable and you should see usb in bottom left of screen. (the device does not need to be activesynced to flash rom) then start exe on pc and the device will reflash.
Click to expand...
Click to collapse
Thank you for your help!
My ROM version is: 2.18.7.2 PTG (15 FeB 06)
IPL: 2.18
SPL: 2.18
I also have this numbers, which I wrote down before the phone got ruined...
Radio Version: 02.10.10
Protocol Version: 413.1.03
ExtROM: 2.18.7.9161
Which of the files in that FTP should I download?...
Looks like your rom is portugese so this will be the one
ftp://[email protected]/Wi...digy_2180702_21807102_20710_QTEK_PTG_Ship.exe
Perfect! Didn't want to do anything wrong this time.
I'll do it tonight, when I get home. Hopefully this will turn it around for me...
I'll let you know.
The least I can do is to say THANK YOU!
You have no idea of how much you can to to make the world a better place.
Thank you so much!
If there's anything I can help this forum in, please do let me know, I'll be glad if I can somehow pay back this enormous piece of advice.
hveiga said:
The least I can do is to say THANK YOU!
You have no idea of how much you can to to make the world a better place.
Thank you so much!
If there's anything I can help this forum in, please do let me know, I'll be glad if I can somehow pay back this enormous piece of advice.
Click to expand...
Click to collapse
No problem glad you got it sorted. I like to help (this is what this FORUM is for) and would hope that it does make a difference. Best way you can help is learn, learn, learn and then help, help, help others. The helpers in the forum seem to come and go so i suppose there is a shortage, most come for info and advice. I enjoy posting helps me relax lol thats why i have over 1000 posts - must be well chilled out by now :wink:
btw do other sims work in your device now - if not ask for your money back!
dun know
hi guys i need help here i'm using spv m3000 with french langueage
i did follow as what told in this part (Download rom from here ftp://[email protected]/Wizard/Roms/Qtek/ password is xda.
To get to the bootloader screen to do this, turn off your device then press and hold camera button and then power on. You should then reach the multicolored bootloader screen. Connect to pc using usb cable and you should see usb in bottom left of screen. (the device does not need to be activesynced to flash rom) then start exe on pc and the device will reflash.)
one thing i dun get is what is exe and where to find please help me
my ipl is 1.03
spl 1.03.0000
os 1.3.1.4
exe is the RUU (RomUpdate Utility) icon in the Rom you downloaded,just run the RUU,it'll start to flash.
hi thanks for ur info i did try to flah the rom ruu but it cannot
flash the rom is there anything else i forget to do /
i did follow all the instrution where i can get the upgrade rom for french version for this pda phone
btw i'm using window vista
chanra said:
hi thanks for ur info i did try to flah the rom ruu but it cannot
flash the rom is there anything else i forget to do /
i did follow all the instrution where i can get the upgrade rom for french version for this pda phone
btw i'm using window vista
Click to expand...
Click to collapse
Vista is still not compatible for flashing,use winXP,its highly recommended and doen't give any problems.
hi thanks alot for info
i did flash wt english rom i use as what u told ( winxp)
thanks alot i wont forget ur help
(zabardast_1)
chanra said:
hi thanks alot for info
i did flash wt english rom i use as what u told ( winxp)
thanks alot i wont forget ur help
(zabardast_1)
Click to expand...
Click to collapse
Thanz!
It was my pleasure to help you,glad you got it working
I have problem n unlocking M3000
I have problem in unlocking SPV M3000.
IPL 2.16
SPL 2.16
meschle said:
Looks like your rom is portugese so this will be the one
ftp://[email protected]/Wi...digy_2180702_21807102_20710_QTEK_PTG_Ship.exe
Click to expand...
Click to collapse
i try to download from link but ask for FTP pass !? what is ?
Hi am new here,
can i updat my device ?
i like to improve the GUI of my pocket pc ,ist possible?
now my device running wm 5 ,can i updat for wm 6?
my device is Qtek wizard200
and more as follows.
suggest me ...thank u
22/09/09 12:02:51
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: .................
=> Bootloaders:
IPL: 2.18.0001 (G4 device)
SPL: 2.18.0001 (G4 device)
Built on Feb 14 2006 at 18:47:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
8fb7d682 - 60.63M (0x3ca0000)
ee9e4266 - 9.99M (0x9fd800)
4ea9d13a - 43.24M (0x2b3e000)
cfb25f96 - 50.95M (0x32f4000)
4fb25f42 - 2.94M (0x2f0000)
0fb25fba - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000813902052e1c1780140406da
Key Index: 82
qtek wizard upadting
Hi am new here,
can i updat my device ?
i like to improve the GUI of my pocket pc ,ist possible?
now my device running wm 5 ,can i updat for wm 6?
my device is Qtek wizard200
and more as follows.
suggest me ...thank u
22/09/09 12:02:51
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: .................
=> Bootloaders:
IPL: 2.18.0001 (G4 device)
SPL: 2.18.0001 (G4 device)
Built on Feb 14 2006 at 18:47:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
8fb7d682 - 60.63M (0x3ca0000)
ee9e4266 - 9.99M (0x9fd800)
4ea9d13a - 43.24M (0x2b3e000)
cfb25f96 - 50.95M (0x32f4000)
4fb25f42 - 2.94M (0x2f0000)
0fb25fba - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000813902052e1c1780140406da
Key Index: 82
Info:
IPL 2.21
SPL 2.21
GSM 02.19.11
OS 2.21.2.5
ROM version: 2.21.2.5 NLD
ROM date: 3/9/06
Radio version: 02.19.11
Protocal verion: 4.1.13.09
ExtROM version: 2.21.2.108
Branded T-Mobile
Problem:
ActiveSync isn't working anymore. After a lot of research and a lot of forum searching and trying almost everything. I think a found where the problem is.
What I think is that my HTC Wizard isn't announcing it present as a USB device. Because there isn't anything show in Device Manager, not even as unknown device!
For the Linux users here lshw -businfo|grep info is empty. There is no sign at all.
But when going in boot mode and connect the USB cable I see on the HTC Wizard that there's a USB connection.
I've tried many different cables to be sure that it wasn't the cables. Also I tried different computer's and different USB port's. But still nothing.
I know that maybe there's someone who had the same problem, if so please post a link the that thread.
PS: sorry for my bad English.
Don't know if its the same, but here's an active thread on USB issues:
http://forum.xda-developers.com/showthread.php?t=301328
I have seen that one, but it isn't solved. Also I already did try everything that is writing there.
I'm almost sure that the problem is in the HTC Wizard. But I don't have any idea what I have to do next.
After more research I found out that the HTC Wizard have to be reconginze as a NIC (network interface card), which ActiveSync talk (TCP/IP) with it. Only in my case there is no NIC, except for my normal NIC card.
Also maybe I should mention that it worked for a long time, but when I updated the ROM to t-mobile 2.21 it stoped working.
Isn't anyone out here who know how to solve this?
I am hoping that you can help me out with a little situation that I may have created on my HTC Tytn.
I was using the original ROM that Shipped with my Tytn and I was experiencing a "slow" device with some audio problems while in calls. Yesterday, I decided to upgrade. I installed SPL-2.10.01ipro. as per the warnings on the page (thankful that I have not bricked my phone) Worked perfectly for allowing myself to upgrade to what I think on the downloads page was the most current "stable" rom. Currently my Tytn is running the download listed below.
Upgraded HTC English Qtek_001
Rom 2.11.255.1 03/07/07
Exp Rom 2.11.215.102
Radio 1.38.00.10
Protocol 32.71.7020.12H
OS Build 15673.3.3.1
AKU 3.3.1
SPL 1.11
HTC BOOT 108
I have to admit, the unit runs great. Problem though, on the old OS, I was able to, under phone "band" select "2G". The reason for this is the Blackberry Connect software that I need to run for my work. (Or else I get assimilated into the world of Blackberry handhelds) will not connect as 3G. I have currently set the unit to "auto" for network type ("GSM ,WCDMA) and "auto" for GSM/UMTS Band. Any time I try to change this to anything else the unit comes back with a "Warning" that it can't complete the change. The unit still will not connect and says "Not Connected" under the bb_connect ver 4 status page. I have tried to install the older Rom back to;
HTC English
CID Q-TEK_001
ROM 1.18.255.3 7/22/06
ExtRom 1.18.255.106
Radio 1.03.03.10
Protocol 32.34.7010.01H
OS Build 14955.2.3.0
AKU 2.3
SPL 1.11
HTC_BOOT 1.04
I'm not sure if I can keep the upgraded radio and Rom versions and simply change the OS version but when I try to change to the complete rom above I get an error (260): UPDATE ERROR
"The Update Utility cannot connect to your PDA Phone. Please Check your USB Cradle/Cable is connected properly between the PC and your PDA phone"
The connection is good as I have been using active sync to install things like the blackberry software.
I am spinning my wheels here. I thank you in advance for any assistance that you can provide.
Hi all.
I start by contemplating the fact that there are quite some portuguese members arround.
Força Portugal
I just got hold of a O2 Xda Orbit. It has windows mobile in english and I want to put it in portuguese.
I don't know how
I have been reading about the ROM's in portuguese but I am afraid of just upgrading without knowing what I am doing.
That is why I am now requesting you guys to point me in the right direction
Device Information:
ROM Version: 3.4.206.2 WWE
ROM Date: 4/18/2007
Radio Version: 02.67.90
Protocol Version: 4.1.13.28
-
Also I don't have (yet) ActiveSync installed on my computer... do I need it?
thank you in advance...
Tiago Geada
cusco
Brief step by step plan
vigaro said:
Hi all.
<question>
ROM Version: 3.4.206.2 WWE
ROM Date: 4/18/2007
Radio Version: 02.67.90
Protocol Version: 4.1.13.28
Also I don't have (yet) ActiveSync installed on my computer... do I need it?
cusco
Click to expand...
Click to collapse
You do need ActiveSync for XP or older, or Windows Mobile Device Center for Vista (download the latest version from Microsoft).
In general you have to do the following steps:
1. Connect your Artemis to the computer using a USB cable.
2. Do NOT make a partnership. If you get a wizard or popup, just cancel/quit it.
3. obtain the rom of your choice (it sounds like you've allready found a PTG rom)
4. make sure your Artemis is CID unlocked. If not, use artemis USPL for this.
5. run RUU.exe or RomUpdateUtility.exe which is usually provided with the rom. If not, find a recent version HERE. If you use a RUU.exe not provided with your rom, just remove the old rom (a large file with the extension .nbh) and put your rom in the folder with RUU.exe
6. Follow steps on the screen. Read the information / caution rules, press next a few times, then press update.
7. The Artemis will go into boot loader mode (first a three color screen, then a grey one with a white/blue progress bar)
8. wait some time, until the wizard says you're finished
9. The Artemis will reboot. Wait for it to completely start windows, then do a hard reset (push both softkeys and the reset button, release reset button after a few seconds). This way you make sure your rom gets flashed well
10. Wait for the progress bar to end again and for windows to start
11. Start calibrating your screen and customising windows to your needs.
This should do it
Hi, to everybody:
I have got a HTC P3300 device (Artemis) purchased in Spain in 2006, unlocked, so I've got no problems on that.
It's was updated by me to WM6 Professional (OS CE 5.2.1620, Build 18125.0.4.2) using official ROM for free devices.
ROM Ver.
ROM Ver: 3.13.412.1 ESN
Date: 8/28/2007
Radio ver: 02.94.90
Protocol ver: 4.1.13.44
ExtROM ver: 3.13.412.102
Now I would like to upgrade it to a cooked ROM like Shady's new ones with WM6.5 or another one with TouchFlo but I can't, altough I've tried almost everything. I'm not a newbie and I work like developer so I understand the most I read but now I'm completely lost; let me explain to you.
My laptop has Windows 7 Ultimate (32bit) installed and I know that this OS(and Vista) have problems so I also tried on XP Professional SP2 without success.
I tried to upgrade the device using the exe directly and trough USPL (from this site and others) but nothing works. I always get the same 2 errors; normally when I use USPL I have error 260 (connection) because the device doesn't go to bootloader screen and if I restart the device into bootloader manually, if the update process starts (not always), it reaches less than 5 or 10% returning a 270 error with message "File corrupt".
I read a lots of in this forum and similar ones checking steps one by one, even trying to update/install USB drivers for Vista but nothing works. When I use USPL, screen goes to black and "unkonwn device" plugged in to USB port is detected on the system so I think the problem is the program can't put the device in correct state, but if I activate bootloader by my self "Sync Device" appears in devices manager but I cannot go futher as I said before.
Do I must make a downgraded to original WM5 and start from it (maybe a problem with loader version)or there's anything that I forgot?. If someone knows a link or think that I missed some step, please help me.
Any kind of help would be appreciated so much. Thank you in advanced
Solved!
OK, here I am!.
Finnally I solved the problem. The issue was that I had have to "do a hard reset before" try to update the ROM. I read somewhere that an application locked the device avoiding the ROM upgrade. I just went to settings > system > emtpty memory and since then I was able to upgrade like the posts said .
Best regards
LoKatEs said:
OK, here I am!.
Finnally I solved the problem.
Click to expand...
Click to collapse
6 minutes between your first and second post and u say: finally i solved the prob!
hahaha
good to hear its working again
Can you post a link for the WM 6.5 version, i found two files, but couldn't install
in the rom section u can find a few wm 6.5 versions.
unlock your phone with USPL and then follow the installation instructions of the roms posted
shady313 and babbelut roms are the most current ones based on 6.5
neither of them have touchflo support though but babbelut rom has spb shell, a different kind of touch cube system
mvenneker said:
babbelut rom has spb shell, a different kind of touch cube system
Click to expand...
Click to collapse
which is really awesome!
its a shame i prefer the 6.1 simple style otherwise i would of kept his rom