I cant sync with bluetooth. Please help
make sure you have the latest rom since this seems to be most stable when doing AS over BT.
On Desktop
1) make sure bt dongle is inserted and all software have been properly installed
2) open Activesync click File>Connection Settings... check Allow serial or infrared connection to this COM port:
3) Indicate your BT COM PORT check your BT software or documentation mine uses COM5, this maybe diff on your desktop.
On PPC
1) Tap Start>Settings>System>Bluetooth Setting
2) Under Bluetooth ActiveSync Setup: tap Start you will be taken to the Bluetooth screen. Make sure both boxes are checked.
3) Under Devices Tab. Tap New your ppc will now search for your desktop.
4) type your passkey and wait for the Desktop to prompt you for a password. Type this password on the desktop to finish bonding.
5) open ActiveSync tap Tools>Connect via Bluetooth and you're done.
I did this but I can't connect still.
Here is my rom:
ROM version: 1.03.00 WWE
ROM date: 11/01/04
Radio version: 1.01.00
Protocol version: 1337.38
ExtROM version: 1.03.166 WWE
your ROM looks old. isn't there a new ROM for O2mini? I suggest you get the latest ROM. anyway with your current ROM it can still be done but it is a bit tri ckier. You can read a step by step how to here http://www.howardforums.com/showthread.php?s=&threadid=544932
sorry for the ignorance. I went to the O2 site and there are no new rom for the mini.
Can you please tell where to get it?
Sorry I didn't know that just assumed O2 had released it since i-mate and qtek have released theirs. I use the i-mate JAM w/ Qtek 1.11WWE ROM. Anyway you can wait for O2's official ROM also or follow the link to HoFo that did the trick before my ROM updates.
I've updated my T-Mobile US MDA to the shipping k-jam ROM and it seems to work fine, though I can no longer connect it to ActiveSync. When I connect the device, Windows detects it as a "Windows Mobile-based Device", but says that it cannot find drivers for it, so ActiveSync can't see it.
I've been looking around for a place to download drivers, but haven't found them. The imate site has a support area, but without an IMEI to an imate device, I can't get access to it. Do they have the Windows drivers in there?
Make sure you have ActiveSync 4.1. Earlier versions will not connect to the latest ROMs. 4.1 is available directly as a download from Microsoft or you can find it on the T-Mo CDROM (if you have a T-Mo device)
I had it already, and reinstalled as well, but still no love. The firewall is off as well.
Searching for drivers on the T-Mo CD didn't turn up anything either.
I have same problem - sometimes - but then, when keep on disconnecting and connecting cable to the phone, after a couple of tries it connects successfully.
Device information
ROM version: 2.8.7.1 WWE
Radio version: 01.13.10
Protocol version: 4.0.13.24
ExtROM version: 2.8.7.101
I am hoping that you can help me out with a little situation that I may have created on my HTC Tytn.
I was using the original ROM that Shipped with my Tytn and I was experiencing a "slow" device with some audio problems while in calls. Yesterday, I decided to upgrade. I installed SPL-2.10.01ipro. as per the warnings on the page (thankful that I have not bricked my phone) Worked perfectly for allowing myself to upgrade to what I think on the downloads page was the most current "stable" rom. Currently my Tytn is running the download listed below.
Upgraded HTC English Qtek_001
Rom 2.11.255.1 03/07/07
Exp Rom 2.11.215.102
Radio 1.38.00.10
Protocol 32.71.7020.12H
OS Build 15673.3.3.1
AKU 3.3.1
SPL 1.11
HTC BOOT 108
I have to admit, the unit runs great. Problem though, on the old OS, I was able to, under phone "band" select "2G". The reason for this is the Blackberry Connect software that I need to run for my work. (Or else I get assimilated into the world of Blackberry handhelds) will not connect as 3G. I have currently set the unit to "auto" for network type ("GSM ,WCDMA) and "auto" for GSM/UMTS Band. Any time I try to change this to anything else the unit comes back with a "Warning" that it can't complete the change. The unit still will not connect and says "Not Connected" under the bb_connect ver 4 status page. I have tried to install the older Rom back to;
HTC English
CID Q-TEK_001
ROM 1.18.255.3 7/22/06
ExtRom 1.18.255.106
Radio 1.03.03.10
Protocol 32.34.7010.01H
OS Build 14955.2.3.0
AKU 2.3
SPL 1.11
HTC_BOOT 1.04
I'm not sure if I can keep the upgraded radio and Rom versions and simply change the OS version but when I try to change to the complete rom above I get an error (260): UPDATE ERROR
"The Update Utility cannot connect to your PDA Phone. Please Check your USB Cradle/Cable is connected properly between the PC and your PDA phone"
The connection is good as I have been using active sync to install things like the blackberry software.
I am spinning my wheels here. I thank you in advance for any assistance that you can provide.
Hi to all. I'm a new person in this fantastic forum. Before yesterday i'm just visiting and reading, but now i need your help
So, I have a Wizard with T-mobile logo on it. Display has been changed, 'cause the original was broken. New display has been buyed from *-bay. Both displays are the same. When put the new display in the Wizard, everything looks fine, except the 8-bit color on the skreen ;( . Last night i read and make step by step things in this Thread: http://forum.xda-developers.com/showthread.php?t=298613 , but i need to stop on step G3.4 - i have a success update from step G3.3 with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE, but when i start the Wizard_Love_2.26.10.2_WWE_Novii_CF2, there is an error - 206 (on italian).
After that, i have read the http://forum.xda-developers.com/showthread.php?t=285435 thread, and started again... First update has been successfull (maybe), the Wizard started with Winmobile 5 (WM6 has been installed before starting updates).
That's the specs:
ipl: 1.01
spl: 1.01
rom date 2/02/07
radio: 01.12.10
rom version: 6.0.0.0 wwe
protokol version: 4.0.13.23
extRom version: Empty Extended (before updating)
Now, after 1st update are:
ipl: 1.01
spl: 1.01
ROM:1.5.4.2 WWE
ROM date: 11/8/05
Radio: 01.12.10
Protocol version: 4.0.12.23
------------------------------------------------------------------------
And now... i haven't idea what to do to update IPL and SPL to version 2.xx
and to install WM6 (XDA Mobile 6 Release 3).
Else, I think that the screen has only 8bit color is not a software problem. I think it's from hardware (display).
Else, i have install ActiveSync, but the program did not find any Wizard attached to the computer..
For first update, i connect and started wizard in bootable mode (3 color display, with 'usb' icon down left...
After restart, when starts normally, AS 4.5 didn't find it...
Can somebody explain me in a few simple steps what to do...
Please..
I'm new in this sphere. Sorry for my bad english.
Have a nice weekend to all.
Here -> http://www.snimka.bg/album.php?album_id=234481 <- are 3 pictures from wizard. 8bit color loooooks very very badd
Lattante said:
Hi to all. I'm a new person in this fantastic forum. Before yesterday i'm just visiting and reading, but now i need your help
So, I have a Wizard with T-mobile logo on it. Display has been changed, 'cause the original was broken. New display has been buyed from *-bay. Both displays are the same. When put the new display in the Wizard, everything looks fine, except the 8-bit color on the skreen ;( . Last night i read and make step by step things in this Thread: http://forum.xda-developers.com/showthread.php?t=298613 , but i need to stop on step G3.4 - i have a success update from step G3.3 with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE, but when i start the Wizard_Love_2.26.10.2_WWE_Novii_CF2, there is an error - 206 (on italian).
After that, i have read the http://forum.xda-developers.com/showthread.php?t=285435 thread, and started again... First update has been successfull (maybe), the Wizard started with Winmobile 5 (WM6 has been installed before starting updates).
That's the specs:
ipl: 1.01
spl: 1.01
rom date 2/02/07
radio: 01.12.10
rom version: 6.0.0.0 wwe
protokol version: 4.0.13.23
extRom version: Empty Extended (before updating)
Now, after 1st update are:
ipl: 1.01
spl: 1.01
ROM:1.5.4.2 WWE
ROM date: 11/8/05
Radio: 01.12.10
Protocol version: 4.0.12.23
------------------------------------------------------------------------
And now... i haven't idea what to do to update IPL and SPL to version 2.xx
and to install WM6 (XDA Mobile 6 Release 3).
Else, I think that the screen has only 8bit color is not a software problem. I think it's from hardware (display).
Else, i have install ActiveSync, but the program did not find any Wizard attached to the computer..
For first update, i connect and started wizard in bootable mode (3 color display, with 'usb' icon down left...
After restart, when starts normally, AS 4.5 didn't find it...
Can somebody explain me in a few simple steps what to do...
Please..
I'm new in this sphere. Sorry for my bad english.
Have a nice weekend to all.
Here -> http://www.snimka.bg/album.php?album_id=234481 <- are 3 pictures from wizard. 8bit color loooooks very very badd
Click to expand...
Click to collapse
You have downgraded your phone to IPL/SPL 1.xx by flashing Button's Rom 1.05.there's no need to flash wizard_love_Rom,instead download and apply lokiwiz02b tool to SIM/CID unlock the phone and then download T-mobile 2.26 and flash to upgrade to IPL/SPL 2.xx for upgrading to wm6.The above guide was written quite a while ago,its better you follow the most updated guide as in the link below:-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Thanks a lot zabardast_1, but I have 1 problem - Activesync didn't find any Pocket, attached to the computer, so i can't make the steps in the tutorial.. the pocket is SIM unlocked.
Lattante said:
Thanks a lot zabardast_1, but I have 1 problem - Activesync didn't find any Pocket, attached to the computer, so i can't make the steps in the tutorial.. the pocket is SIM unlocked.
Click to expand...
Click to collapse
Is your phone working normal,does it load up to OS ? to check the connectivity,get the phone into bootloaders(tricolor screen) connect via usb cable and check if usb appears at the bottom of the bootloaders,if not then there's a connectivity problem,either with usb cable or the mini usb port of the phone.
if the phone works normal and loads OS,then you can even try to use lokiwiz02b or WST tool via BT and CID unlock the phone.
It's normal working, like I said in my 1st post - 8bit color. I think it's from OS, but i'm not sure - i have downgrade form WM6 to WM5, and the problem is still here .
In bootload mode have indication for USB - bottom left on the screen, the battery has charging, but ActiveSync still don't want to find my Wizard..
P.S. Pfffff, I decline to fight with that.... Monday i'll test with other USB cable. Even it charging battery, i think ActiveSync can't recognize the Wizard, because USB cable is failed somewhere,...
I don't know what i think.. I'm tired.... Good night..
If its working normal and it establishes connectivity through usb as it appears in the bootloaders,then,its the AS software,which is not detecting.Assuming you are using winXP,Delete all partnerships/profiles in the settings of the AS or Uninstall As and download the latest version 4.5 and install it,close any Antivirus/Firewall or any other software which might be hindering with AS and let it again activesync.Also remember to uncheck 'Enable advanced network functionality' in the settings...> connections...> usb to pc options in your phone.
Hello again. I try to install 3 versions of AS, but the result is the same - No Connection. reset the wizard 3 times, stop all running software - ICQ, Skype, antivirus, browser... no and no.
When AS looking for device, there is 7 8 COM ports, Infrared (no installed), USB available, but AS can't find my bluetooth...
I have install bluetooth, and make connection with the wizard, but i can't unlock with lokiwiz02b-HTC Unlocker.
Better try on other winXP based pc
I think so, tommorow at work zabardast_1 thanks a lot man.
I have spent the last few hours searching various keywords trying to solve this issue on my own... But, I cannot.
As a result, I'd like to thank you for taking the time to help me solve the following issue:
I recently Flashed my TMobile MDA (aka the Wizard) by following these instructions exactly:
http://forum.xda-developers.com/showthread.php?t=298613
including:
http://forum.xda-developers.com/showthread.php?t=285435
After having completed those steps, I installed the following ROM:
http://forum.xda-developers.com/showthread.php?t=391927
-----The Professional Edition
In order to solve a bug issue, I also flashed the Radio from 2.25.xx to 2.19.11 ((suggested by TNT)).
At this point, I have the letter "E" in a box next to the Radio Signal Strength Bars. To the best of my knowledge this used to be a "G."
Here is the following Device Information for my phone:
ROM version: 11.0.3.0 WWE
ROM Date: 2/02/2008
Radio Version: 02.19.11
Protocol Version: 4.1.13.09
IPL: 2.26
SPL: 2.26
I can receive/make calls and SMS text message. However, I cannot access the internet or receive MMS messages as I did prior to toying w/ the phone. It is no longer connecting to/via/with/? GPRS
Any and all assistance in this matter would GREATLY be appreciated!
Many Thanks!
Install HTC Network Wizard cab then chose your netwoek it will work and setup uour connection . restart have fun. here is the link
http://forum.xda-developers.com/showpost.php?p=1832753&postcount=3
I moved it over, and ran the cab file.... nothing happened...
I can't even find a program listed in in Add/Remove Programs... any suggestions?
try one of these cabs..
http://forum.xda-developers.com/showthread.php?t=395203
ElijahMrE said:
I moved it over, and ran the cab file.... nothing happened...
I can't even find a program listed in in Add/Remove Programs... any suggestions?
Click to expand...
Click to collapse
For what its worth..
Soft reset, and its in the settings->connections screen
hi
people do u think i can use this cab file to install on my daxian x999+ i have orange company from Spain and i have the same problem
Did you connect to 'internet2.voicestream.com' ? This is needed to connect GPRS TMobile.