I have the following problem and I hope someone can help me with it.
After installing a big storage rom on my MDA ande have difficulties with connecting to my Parrot CK3000 with bluetooth. After giving the pass key the voice keeps saying "memory fault"
Connecting to a bluetooth GPS reciever is not a problem.
Big storage information
ROM version : 1.12.00 WWE
Radio version : 1.12.00
Does anybody knows how to solve this problem.
Hi,
if the problem still exist, try to reset the ck3000. press and hold the red and green key for few seconds.
Regards Yoshi
Related
i have upgraded my XDA2 to WM2003SE. after a few months of perfect running condition under the new ROM, my BT all of a sudden died on me. when i try to enable BT, the same error message keeps on popping up... "There is no bluetooth hardware installed on this device."
i have tried multiple hard and soft resets but to no avail. what could be the problem? hope you guys can help me out.
TIA
ssaloon said:
i have upgraded my XDA2 to WM2003SE. after a few months of perfect running condition under the new ROM, my BT all of a sudden died on me. when i try to enable BT, the same error message keeps on popping up... "There is no bluetooth hardware installed on this device."
i have tried multiple hard and soft resets but to no avail. what could be the problem? hope you guys can help me out.
TIA
Click to expand...
Click to collapse
Did you install some software, or tweak your registry during this time period?
Perhaps you can supply more information:
(a) ROM version, (from who DCS, ZeroExtreme, SIN)
(b) MS/Widcomm version/Toshiba BT stack or a combo
(c) Any registry tweaks and/or BT files you've replace?
If you have not done anything out of the ordinary, try upgrading your ROM again without the Radio or ExtROM package. You will get to retain your Radio and ExtROM stuff.
If all else fails, go to your local support centre to check if the BT chip is faulty.
henrylim said:
Did you install some software, or tweak your registry during this time period?
Perhaps you can supply more information:
(a) ROM version, (from who DCS, ZeroExtreme, SIN)
(b) MS/Widcomm version/Toshiba BT stack or a combo
(c) Any registry tweaks and/or BT files you've replace?
If you have not done anything out of the ordinary, try upgrading your ROM again without the Radio or ExtROM package. You will get to retain your Radio and ExtROM stuff.
If all else fails, go to your local support centre to check if the BT chip is faulty.
Click to expand...
Click to collapse
nope, haven't installed any BT or registry tweaks.
the ROM version i installed was ZeroExtreme's. i'll try upgrading my ROM again when i get home tonight. hope it's not the hardware that's at fault.
thanks, man
Hello.
I have a big problem with my BT in MDA 2 ... When i do a hard reset, after start of WM2003SE BT icon have a red line on itself. When I tap this Icon I can see error message: "There is no Bluetooth hardware installed on this device." and every field is grey....
Is there a driver which can fix it ?
Regards, Bartek
/edit: I saw reply about registry fix, but i don't have any backup And I can't take this registry key ... Can sb help me ?
kijan said:
Hello.
I have a big problem with my BT in MDA 2 ... When i do a hard reset, after start of WM2003SE BT icon have a red line on itself. When I tap this Icon I can see error message: "There is no Bluetooth hardware installed on this device." and every field is grey....
Is there a driver which can fix it ?
Regards, Bartek
Click to expand...
Click to collapse
It seems that the BT driver wasn't loaded properly! Can you check?
Are you sure, you didn't change anything in the registry?
Which BT stack are you using?
Hi ... But can You tell me how can I check it ? I'm really "green" in MDA & PPC .. But BT don't work even I do a Hard Reset ... I've bought this model yesterday and I can't tell anything about it's history ...
kijan said:
Hi ... But can You tell me how can I check it ? I'm really "green" in MDA & PPC .. But BT don't work even I do a Hard Reset ... I've bought this model yesterday and I can't tell anything about it's history ...
Click to expand...
Click to collapse
Huch! This will be difficult indeed...
Ok, let's start!
1) Go in Settings/System, click on Device Information and give me what you have on the version tab.
2) Go In Windows directory and search for a file called ASIC5_BTUR.dll
OK.
1.Version:
ROM Version: 2.06.00WWE
ROM date: 06/14/04
Radio Version: 1.18.00
Protocol Version: 1337.38
ExtROM version : (blank)
2. Don't have this DLL
/sorry about time when I'm responding...
kijan said:
OK.
1.Version:
ROM Version: 2.06.00WWE
ROM date: 06/14/04
Radio Version: 1.18.00
Protocol Version: 1337.38
ExtROM version : (blank)
2. Don't have this DLL
/sorry about time when I'm responding...
Click to expand...
Click to collapse
If you use fileexplorer to show files, don't forget to select show all files option. then make a search on ASIC5_BTUR
If you don't have it, well you need to reinstall it or think about upgrading your pda to WM2005
Cheers,
.Fred
Hi everybody,
I own a HTC P3600 (under the S300+ brand) and despite a lot of attempt to setup a bluetooth connection it seems that the hardware is not recognized at all.
I have the message "there is no bluetooth hardware installed" and each time i check the BT box "activate BT" when i switch back to the activaton tab the option is unchecked. When i try to scan other devices i have an error message "problem with the bluetooth hardware"
I thought i could find a software that could verify the hardware configuration like the one we have on win XP or a driver i could install over the actual configuration but i didnt find anything.
At first the internal GPS didnt work as well but after i flashed the OS with the original OS version + the radio extension V1.48 it now works fine. However i would like to use my external BT GPS (sirf III) which is more accurate and efficient.
I'm really desperate and dont know what to do to activate the BT.
i tried hardware and soft reset, even an OS upgrade (WM6) without results.
If anyone has an idea of what i could do to test the hardware to verify if the BT is dead or if its related to a software problem.
Just one more bump and if nobody has any idea well then i give up..
dijou31 said:
Just one more bump and if nobody has any idea well then i give up..
Click to expand...
Click to collapse
Hello:
I m having the same problem with the bluetooth, i tried to turn on a a message " error bluetooth hardware". Whata did you do to fix your problem.
i apreciate a lot your help.
thanks
i have a i mate no bluetooth
no bluetooth hardware after replacing backup bat tried rom up load no go hard boot any ideas.
I have the same probleme, do you have any idea Please ?
JeremaX said:
I have the same probleme, do you have any idea Please ?
Click to expand...
Click to collapse
Try upgrading/reflashing you Radios.
same problem after a backup restore. Hardware error radio 1.56.70.11
Hi, i've discovered that is a registry problem but i don't know what is the wrong key to repalce it
Hi @all,
I just upgraded to WM6. Now I have 2 Problems:
1. I can't connet to WIFI Hotspot
2. After Softreset and entering the PIN it says "No service" (but not all the time)
3. I am using Voice Command 1.6 but I dont hear the announcements through my Headset
Can anyone help?
Greetings
Peter
1. Depends on hotspot encryption (you can do this trick: turn on wifi trough wlan manager start-settings-connections-wireless lan, it will turn on and turn off by itself, then turn on wireless trough comm manager, it will start but it will not connect to any network, so turn it off from comm manager and turn it on again and if the encryption is supported it will connect)
2. This never happened to me, try to clean your sim card contacts
3. I had this problem with WM5 also but i not remember the solution, try to search the forums for one
Hi xplode,
1. Solved. At home it works, but at work not. I'll try to find out the problem
2. It's only after a sofreset. When I go from the phone-application into Menu-Options-Network and klick the button "Find Network" then it finds my GSM-Network and everything is Ok
3. Problem not yet solved. Can't find any usable threads.
By the way. It doesn't show at the top of the screen that my headset is connected. I only see it in the phone-application. Any solution for this?
Thanks
Peter
linuxpete said:
Hi xplode,
1. Solved. At home it works, but at work not. I'll try to find out the problem
2. It's only after a sofreset. When I go from the phone-application into Menu-Options-Network and klick the button "Find Network" then it finds my GSM-Network and everything is Ok
3. Problem not yet solved. Can't find any usable threads.
By the way. It doesn't show at the top of the screen that my headset is connected. I only see it in the phone-application. Any solution for this?
Thanks
Peter
Click to expand...
Click to collapse
did you upgrade the radio firmware? I had some issue's with the radio after wm6, I upgraded to 1.15 and all the problems where fixed...
Hi Datake,
It's the original ROM from Helmi. Where do I find the Radio-Update? How do I install it?
Thanks
Peter
NO services gsm, after soft reset
I don´t have apply rom radio update in my qtek 9090 (blue angel)...
My radio rom version is 1.06...
If I apply a soft reset, I lost my signal gsm...
After 2 tries (2 soft reset), the signal come back...
I have a problem when I try apply rom radio upgrade to 1.15.
(connection failed, after activesync is closed in my pc).
(PS: using upgrade_noID)
How can I proceed in this case ?
Help me guys... please...
Rodrigo
Qtek 9090 (blue angel) - WM6 R0 - radio rom 1.06
MS Activesync 4.5
Brazil.
Hello everybody,
Does anyone can tell how to fix the error message "Unidentified USB device - Please enter the name of your device" etc.. + field to fill and Enter or Cancel buttons? Once it appears, most of functions of the device go frozen and all I can do is to soft - reset it which is very inconvenient of course.
To be precise the message is displayed at random, but more often when I type SMS (not necessarily the case however).
I know that only YOU guys may help me to find an issue. So I do trust in you all.
My Uni config, if it helps :
WM 5.0 with the Messaging and Security Feature Pack
OS 5.1.465
ROM version 2.00.41 WWE
Radio version 1.17.00
ExtROM : 2.00.147 WWE
Thanks in advance ;-)
A fan of yours,
Rado Heriniaina