Hi @all,
I just upgraded to WM6. Now I have 2 Problems:
1. I can't connet to WIFI Hotspot
2. After Softreset and entering the PIN it says "No service" (but not all the time)
3. I am using Voice Command 1.6 but I dont hear the announcements through my Headset
Can anyone help?
Greetings
Peter
1. Depends on hotspot encryption (you can do this trick: turn on wifi trough wlan manager start-settings-connections-wireless lan, it will turn on and turn off by itself, then turn on wireless trough comm manager, it will start but it will not connect to any network, so turn it off from comm manager and turn it on again and if the encryption is supported it will connect)
2. This never happened to me, try to clean your sim card contacts
3. I had this problem with WM5 also but i not remember the solution, try to search the forums for one
Hi xplode,
1. Solved. At home it works, but at work not. I'll try to find out the problem
2. It's only after a sofreset. When I go from the phone-application into Menu-Options-Network and klick the button "Find Network" then it finds my GSM-Network and everything is Ok
3. Problem not yet solved. Can't find any usable threads.
By the way. It doesn't show at the top of the screen that my headset is connected. I only see it in the phone-application. Any solution for this?
Thanks
Peter
linuxpete said:
Hi xplode,
1. Solved. At home it works, but at work not. I'll try to find out the problem
2. It's only after a sofreset. When I go from the phone-application into Menu-Options-Network and klick the button "Find Network" then it finds my GSM-Network and everything is Ok
3. Problem not yet solved. Can't find any usable threads.
By the way. It doesn't show at the top of the screen that my headset is connected. I only see it in the phone-application. Any solution for this?
Thanks
Peter
Click to expand...
Click to collapse
did you upgrade the radio firmware? I had some issue's with the radio after wm6, I upgraded to 1.15 and all the problems where fixed...
Hi Datake,
It's the original ROM from Helmi. Where do I find the Radio-Update? How do I install it?
Thanks
Peter
NO services gsm, after soft reset
I don´t have apply rom radio update in my qtek 9090 (blue angel)...
My radio rom version is 1.06...
If I apply a soft reset, I lost my signal gsm...
After 2 tries (2 soft reset), the signal come back...
I have a problem when I try apply rom radio upgrade to 1.15.
(connection failed, after activesync is closed in my pc).
(PS: using upgrade_noID)
How can I proceed in this case ?
Help me guys... please...
Rodrigo
Qtek 9090 (blue angel) - WM6 R0 - radio rom 1.06
MS Activesync 4.5
Brazil.
Related
Hi!
I got a major problem when i upgrading my Qtek1010 to PPC 2003..
It works really good until the machine goes on suspend or i try to reboot.
I can't get it to restart, it's like the "on button" is broken. If i press soft reset the machine boots up really fine OR if i open and close the sim card holder...
Does anybody have a clue over what's wrong? I have been trying to find the answer on the forum but with no luck...
/Mike
Have you KSE Truefax on your device?
Than this is the problem....
HTH
Stefan
hmm, another error..
Thanks for the help, the phone is working now, except for one thing.. GPRS!!
Vodafone has made som upgrade on GPRS so QTEK want's me to send the phone to service... There should be a way to solve this without sending the phone... Do you have any idea? Maybe it's the radio that needs upgrading?
do you have the right settings for vodaphone where you live ?
often you have to manualy setup such settings in connections after a rom upgrade
you can try search for which settings vodaphone use
I've tested different settings, but i don't think that's the problem. i think that i have to use the right radiostack or something like that to get it to work..
Please help me make my Sandisk 256+wifi work on my XDA Mini.
All the time i want to enable the wifi i have to reset the deive then insert the card...after inserting the green light apperas but when i want to configure it byit's software by clicking on the antenna below the screen the device freezes so i have to eject the card then device backs to normal state.
Please help to have the latest driver or additional software and assist me to make it work..
Regards
ROM: 1.12 O2 Xda Mini
Hi:
I don't have one, but i went to www.sandisk.com and found this, before i bought the card:
http://www.sandisk.com/pdf/retail/wi-fi-sd-compatibility.pdf
Sorry mate, it is not compatible!
Only the version without memory..
Bye
Driver
It's compatible..cause in the list for MDA compact which is as same as XDAii Mini bith cards are compatible...
Still looking to find stable driver and solution
Regards
Mine Combination is working fine....
Using German 1.12 ROM and latest driver from sandisk.com
Stefan
Sorry you are right they are compatible! my mistake!
Good luck
Glad to hear at least one person can work with it..so how can i obtain your ROM?
Hi
I have the same problem a few weeks now.
Before it worked great no problems at all.
i have the latest drivers and using rom 1.11.00
Don't know what's happend why it doesn't work properly anymore.
grts leon
LumpiStefan said:
Mine Combination is working fine....
Using German 1.12 ROM and latest driver from sandisk.com
Stefan
Click to expand...
Click to collapse
You mean you don't have to reset your device for working with it?
will it be detected everytime you turn on your MDA?
Have it hanged ever?
So why mine doesn't work?
Hi
Remove the drivers from your PDA by going to start-> settings->system-> remove program. Select the entries for the Sandisk card and remove them. Soft reset your PDA and then try the drivers from the website for PPC 2003.
After the driver has been installed. Please do another soft reset of the PDA and then insert the card.
Here is the configuration that should be on your PDA. The bluetooth support should be disabled. Tap on the two arrows on the top of your PDA. go to settings-> click on connections and then the advanced tab. then Tap on the network card to connect to your access point (AP). AP browser will be grayed
out, This is normal as we didn't develop a utility for pocket pc 2003. Make sure you have the automatically connect to non-preferred network option checked. If there are no items listed in the wireless networks box you can add your AP by tapping on "Add new Setting" Type the network name for your wireless network. You can find this in the configuration of your router. After you enter the name make sure "connects to" is set to "The Internet" and then tap on the authentication Tab. If you are not using the wep key, you can uncheck the box for wep. If you are using it on your router make sure to set it exactly the way it appears on your AP. When you finished making all those changes please tap on OK that appears up at the top. IF your AP is on, and within the range, you should see connected next to it and the tower to the left of it will have a
blue ring around the top. If you see a red X on the tower and it shows unavailable you should check the following:
1-IS the AP on
2- Is it in range 3- are your settings correct.
Once you see the connected next to your AP you can tap ok twice and begin using your wireless access.
It works for me
Grts Leon
Hi,
I've got an Orange M500, upgraded with the Imate ROM 1.12.00WWE - ever since I upgraded the ROM, I can connect to my Orange GPRS service fine, however, if I disconnect then try to reconnect again, the connection fails. I have to turn on flight mode, then turn on the radio again in order to get GPRS access.
I've tried upgrading to Radio 1.13.00, but still no joy.
Any ideas?
Mine does that and I have the original ROM. A bit of a pain isn't it.
Here's the fix
This was originally posted by Peter for the imate JAM.
I just installed it and it's working like a charm.
1. Download the older version of caller-id from:
ftp://xda:[email protected]/BlueAngel/CAB_Files/Caller ID/IA_CallerID_1.20_WWE.CAB
and transfer it over to your device. Any directory is Ok. I used ActiveSync to put it into the My Documents folder.
2. Remove the file IA_CD-Startup.exe from \Windows\Startup on your device.
3. Rename iacontacts.dll to something else (e.g. old-iacontacts.dll). This file is in the \Windows directory of your device but is hidden. However you can rename it using your PC. Open Windows explorer, and navigate to Mobile Device>My PocketPC>Windows.
4. Rename displayCID.dll to something else (e.g. old-displayCID.dll). Access it via your PC the same as for the previous step.
5. Soft reset
6. Run the CAB file on the device - just tap on it.
7. Soft reset.
That should do it.
I have the same GPRS problem too. However, the link you provided just asked for the password to access that ftp. Hey, acs540, do you know the password or do you have that CAB file? Thanks in advance.
usernameassword is xda:xda
The fix in this post seems to refer to caller id!?! I too get the gprs connection problem and have made it better with different roms but not found a sure-fire fix.
If anyone has a patch that fixes this, please post it!
GPRS now working
Hi,
Finally I tried, or at least halfway, After I removed the CallerID everyone is talking about my Qtek9090 now works flawless regarding GPRS.
This is very interesting that Caller ID software makes GPRS not working
Anyway, now I can start and stop GPRS several times, I have now toggled it 10 times without any problem.
Before I had to reset/toggle radio to make it reconnect after a disconnect.
Thank you all that has investigated this problem!
One last thing, Do you really need CallerID? :roll:
Br
Lars
I don't use Caller_ID, but Photo Contacts Pro.
Did you also try to change GPRS slot (Class 8 or Class 10) in GPRS settings?
XShell said:
I don't use Caller_ID, but Photo Contacts Pro.
Did you also try to change GPRS slot (Class 8 or Class 10) in GPRS settings?
Click to expand...
Click to collapse
Well, yes, I have changed to Class8 (4R1T), default was (I belive) Class10
Br
Lars
Hi everybody,
I own a HTC P3600 (under the S300+ brand) and despite a lot of attempt to setup a bluetooth connection it seems that the hardware is not recognized at all.
I have the message "there is no bluetooth hardware installed" and each time i check the BT box "activate BT" when i switch back to the activaton tab the option is unchecked. When i try to scan other devices i have an error message "problem with the bluetooth hardware"
I thought i could find a software that could verify the hardware configuration like the one we have on win XP or a driver i could install over the actual configuration but i didnt find anything.
At first the internal GPS didnt work as well but after i flashed the OS with the original OS version + the radio extension V1.48 it now works fine. However i would like to use my external BT GPS (sirf III) which is more accurate and efficient.
I'm really desperate and dont know what to do to activate the BT.
i tried hardware and soft reset, even an OS upgrade (WM6) without results.
If anyone has an idea of what i could do to test the hardware to verify if the BT is dead or if its related to a software problem.
Just one more bump and if nobody has any idea well then i give up..
dijou31 said:
Just one more bump and if nobody has any idea well then i give up..
Click to expand...
Click to collapse
Hello:
I m having the same problem with the bluetooth, i tried to turn on a a message " error bluetooth hardware". Whata did you do to fix your problem.
i apreciate a lot your help.
thanks
i have a i mate no bluetooth
no bluetooth hardware after replacing backup bat tried rom up load no go hard boot any ideas.
I have the same probleme, do you have any idea Please ?
JeremaX said:
I have the same probleme, do you have any idea Please ?
Click to expand...
Click to collapse
Try upgrading/reflashing you Radios.
same problem after a backup restore. Hardware error radio 1.56.70.11
Hi, i've discovered that is a registry problem but i don't know what is the wrong key to repalce it
Hi all,
Everything was working fine, till i installed a Schap´s 6 button comm manager.cab
The new comm manager was not able to turn wifi on, but i still could do it through connections label or Battery status tray icons.
But i read that ins some cases when wifi doesent unable you can delete from the registry the key WLAN in :[HKEY_LOCAL_MACHINE\Software\HTC\CommManager]
So i did it... after that i am no able to turn WIFI/WLAN on
even from where i could (manually in connection label or Battery status)
I installed some comm manager.cabs to recover that key.
So now The WLAN registry key is there again there but
Wlan is not working any more.
I also read about some cases that wifi is ****ed from the rom, but i think is not my case ´cos it was just installing new cabs. and deleting that key.
I hope someone can help.
Thanks a lot
had similar but not exact problem a while ago
i eventually had to perform hard reset
what is your radio rom- anyway?
jahrami said:
had similar but not exact problem a while ago
i eventually had to perform hard reset
what is your radio rom- anyway?
Click to expand...
Click to collapse
Dont know how to check it.... can it be some of this? :
WM6
ipl 3.13.0001
spl 3.13.0000
gsm 02.94.90
os 3.13.0.0
schaps
It is the skin of schaps 6 button comm. that is the problem, try this one and you have no trouble....
http://forum.xda-developers.com/attachment.php?attachmentid=59395&d=1195993666