Hi!
I got a major problem when i upgrading my Qtek1010 to PPC 2003..
It works really good until the machine goes on suspend or i try to reboot.
I can't get it to restart, it's like the "on button" is broken. If i press soft reset the machine boots up really fine OR if i open and close the sim card holder...
Does anybody have a clue over what's wrong? I have been trying to find the answer on the forum but with no luck...
/Mike
Have you KSE Truefax on your device?
Than this is the problem....
HTH
Stefan
hmm, another error..
Thanks for the help, the phone is working now, except for one thing.. GPRS!!
Vodafone has made som upgrade on GPRS so QTEK want's me to send the phone to service... There should be a way to solve this without sending the phone... Do you have any idea? Maybe it's the radio that needs upgrading?
do you have the right settings for vodaphone where you live ?
often you have to manualy setup such settings in connections after a rom upgrade
you can try search for which settings vodaphone use
I've tested different settings, but i don't think that's the problem. i think that i have to use the right radiostack or something like that to get it to work..
Related
I'm new to this forum and it seems like a great resource. I have seen this question answered but the answers are still above my head in terms of complexity. I've got an AT&T branded SX56 running 2002 and an XDA-Developers ROM (I think). It is unlocked, I am guessing through the use of an XDA Developers tool for unlocking. I'm in Colorado and using the phone with T-mobile. My question is this, I'd like to upgrade to 2003 and have downloaded the file to do so from Siemens website for free, which is great. It had some nice enhancements and I thought I'd upgrade to it. So, I downloaded/installed the new ActiveSync v3.71 and then tried to run the upgrade. I got the same message many have gotten apparently saying that the ROM Image is not compatible. The specs are;
current
Model PW10A1
ROM 3.17
English
upgraded
Model PW10B1
ROM A.30
English
In reading through the posts it seems that I need to upgrade the ROM of the device, but I still get lost looking at "cooking a ROM", etc and what exactly I need to do. Making this a little more urgent is the fact that after I tried to upgrade the phone (which gave me the ROM error) my internet connection on the phone (which was working fine) suddenly doesn't work with explorer or outlook on my phone giving me an error "Trouble Connecting; Unable to connect with current settings" even though I didn't change the settings and they look exactly as they did before. So, I feel like I've messed something else up on the phone even though it didn't get to install the whole upgrade.
So, any advice for a novice? Thanks in advance, I appreciate any help you can give.
Best regards,
chefandy
the official AT&T release for WM2003 is an exe file contains both ROM & RSU upgrade, and it aparently designed for PW10B devices (900/1900 MHz).
i think the first part of the faulty upgrade (usually RSU) affected your device ... i really hope not
chech your device info and tell us what's there. if u can still get to the boot loader screen and activesync can still connect to the device, then it's not a severe damage. I think successful RSU upgrade with the right stack would solve it.
I'm not sure what the boot loader screen is, but the device still syncs just fine and seems to be working ok except for the internet connection issue. The funny part is that I can connect to the GPRS connection by going to the connections screen, but then when I transfer to Outlook or Explorer they do not recognize the connection as something they can use.
Is the Siemens upgrade I downloaded (http://www.my-siemens.com/MySiemens...C%2FMC%2FSX56POCKETPCPHONE%2Fdanda%2F,00.html) different from the AT&T upgrade you mention? I also saw there was a T-mobile upgrade to 2003 but it was not available when I tried to download it from tmobile.com. Thanks!
That's great! .. ... It seems I misunderstood your issue ... I thought you lost the RSU part.
I think something wrong happens to the registry values ... you see, there is a reference for each defined connection in the registry which all applications that may require to connect to GPRS or WAP or MMS can refer to.
I suggest that you delet ALL connections and start the setting from scratch ... I can't guarantee it will work since some applications may be required to be uninstalled and reinstalled to use the new connections references (if it has smart uninstaller!!).
The last resort is a hard reset which will bring the registry to the original setup.
Well, I did what you suggested and started with a new connection and it worked :lol: Thanks!
Now I'm back to the original question about whether or not I can safely upgrade to WM2003 or not? Thanks again for all your help.
The answer is YES! ... it's easy to upgrade ur ROM to WM2003 if u know what ur doing.
spend some time reading this forum on how to cook a new ROM from the kitchen ... and it's better to get yourself SD card for flashing and backup.
Hi everyone...I'm a newbie. Been reading all the pages but can't find answer to my q.
I installed T-Mobile ROM 4.01.16 downloaded from ROM kitchen. Unfortunately, now I cannot use the phone on my xda. It simply can't find my phone network. I tried to go into phone options but the phone hang. Otherwise, the rest works fine except it hangs sometimes.
I've tried to install new ROM, one for O2 xda but the error message below surfaced:
ERROR:Get Connection type - An existing connection was forcibly closed by the remote host
error getting connection type.
Now I'm unable to install a new ROM. Even via SD card. Please help.
PS Have also tried using xdatools to unlock. I get the same error message ie the remote host forcibly closed connection
If it's a PW10A-Model that you have try entering Wallaby Bootloader and set GSM settings manually to 900/1800. Installing the 4.01.16 ROM sets the settings to 900/1900. Maybe this is your problem...
HTH
Stefan
Same problem over here
Hello,
I also installed the t-mobile on my o2 xda accidentally,
i already put it on european band frequency 900/1800 via the wallaby editor.
But still i'm not able to put back the o2 wme 2003 on it.
any solutions for this issue ?
thanks in advance,
thomas.
Flash your ROM via SD-Card....
Thanks so much Lumpi. Now my phone works but a different problem crops up. The device once turned off, will not turn on unless I soft reset it. Also, when it is off, the phone will not ring/vibrate when there's an incoming call. The green LED flashes as usual, indicating phone is working. Any idea how to fix this? Thanks inadvance.
another Q: can I use an MMC 256MB card to flash the rom or can i only use SD card?
fadzrina said:
Thanks so much Lumpi. Now my phone works but a different problem crops up. The device once turned off, will not turn on unless I soft reset it. Also, when it is off, the phone will not ring/vibrate when there's an incoming call. The green LED flashes as usual, indicating phone is working. Any idea how to fix this? Thanks inadvance.
another Q: can I use an MMC 256MB card to flash the rom or can i only use SD card?
Click to expand...
Click to collapse
Have you used KSE Truefax? I think that is the problem with not turning on the device....
I think you can also use a MMC Card. Never tried it myself, cause i only have SD-Cards...
Stefan
I've never use Truefax eventhough I have it on the device as I cooked it in the ROM. Any other ideas? Thanks
I had the same problem with 4.1.16 and KSE. It doesn't matter if you "use" it or not. Something about KSE being cooked intothe rom stops the device from operating correctly. To date you are the 5th person I know of to have that problem. Recook the same rom less KSE, reflash, and I can almost garauntee it will work.
thank you everyone....it is indeed the KSE Truefax that was the culprit. I've since invested in a card reader/writer and a 256MB MMC card and my phone works again!
PS special thx to lumpi
tm 2003
I installed T-Mobile ROM 4.01.16 downloaded from ROM kitchen. Unfortunately, now I cannot use the phone on my XDA. It simply can't find my phone network. I tried to go into phone options but the phone hang. Otherwise, the rest works fine except it hangs sometimes.
I've tried to install new ROM, one for O2 XDA but the error message below surfaced:
ERROR: Get Connection type - An existing connection was forcibly closed by the remote host
error getting connection type.
Now I'm unable to install a new ROM. Even via SD card. ROM sets the settings to 900/1900, and I can’t get into Bootloader via SD flashing nor power, soft reset, rocker/action…Any suggestions?
Hi there
I am new to this forum, I have purchased an SPV m600 on Orange from ebay, and I was woundering if I can upgrade the rom to T-mobile Vario. Has this been done before and will it work. If not please can soemone let me know where I can get other roms for this device. I am a t-mobile users, and the phone keeps on freezing when I enable push mail.
Cheers
The vario is the wizard while your device as you know is a prophet. Attempts to put wizard ROM on prophet "as is" were made with WM 6 but the results were unusable.
Chances are you will brick your device completely.
But note this: you push-mail problem shouldn't require a ROM change. All orange customization is in the ext ROM so try hard resetting your device, the soft resetting just after you finish all the calibration and stuff so the ext ROM wouldn't install. Then get the proper connection setting for T-mobile and see if it works.
Thanks for your help, are there any other Rom's I can install on that device ie, Imate or XDA. This way I will remove all the Orange setting of the device.
I have entered all the t-mobile gprs settings on the device, but it still frezzes every so often, but everything works still the web and email. I am not happy with the device fall asleep for 30 sec or so.
Cheers
Try the forum search for the Qtek 2.20 WWE ROM! This ROM is in english and have no Ext ROM from a provider such as T-Mobile or Orange! I think this would help you!
You must setup the connection data after finish installing manually but this isn't a big problem!
spv m600
Thanks for you help, if you come accross the link then let me know. I will do some searching over the weekend.
Cheers
Hi @all,
I just upgraded to WM6. Now I have 2 Problems:
1. I can't connet to WIFI Hotspot
2. After Softreset and entering the PIN it says "No service" (but not all the time)
3. I am using Voice Command 1.6 but I dont hear the announcements through my Headset
Can anyone help?
Greetings
Peter
1. Depends on hotspot encryption (you can do this trick: turn on wifi trough wlan manager start-settings-connections-wireless lan, it will turn on and turn off by itself, then turn on wireless trough comm manager, it will start but it will not connect to any network, so turn it off from comm manager and turn it on again and if the encryption is supported it will connect)
2. This never happened to me, try to clean your sim card contacts
3. I had this problem with WM5 also but i not remember the solution, try to search the forums for one
Hi xplode,
1. Solved. At home it works, but at work not. I'll try to find out the problem
2. It's only after a sofreset. When I go from the phone-application into Menu-Options-Network and klick the button "Find Network" then it finds my GSM-Network and everything is Ok
3. Problem not yet solved. Can't find any usable threads.
By the way. It doesn't show at the top of the screen that my headset is connected. I only see it in the phone-application. Any solution for this?
Thanks
Peter
linuxpete said:
Hi xplode,
1. Solved. At home it works, but at work not. I'll try to find out the problem
2. It's only after a sofreset. When I go from the phone-application into Menu-Options-Network and klick the button "Find Network" then it finds my GSM-Network and everything is Ok
3. Problem not yet solved. Can't find any usable threads.
By the way. It doesn't show at the top of the screen that my headset is connected. I only see it in the phone-application. Any solution for this?
Thanks
Peter
Click to expand...
Click to collapse
did you upgrade the radio firmware? I had some issue's with the radio after wm6, I upgraded to 1.15 and all the problems where fixed...
Hi Datake,
It's the original ROM from Helmi. Where do I find the Radio-Update? How do I install it?
Thanks
Peter
NO services gsm, after soft reset
I don´t have apply rom radio update in my qtek 9090 (blue angel)...
My radio rom version is 1.06...
If I apply a soft reset, I lost my signal gsm...
After 2 tries (2 soft reset), the signal come back...
I have a problem when I try apply rom radio upgrade to 1.15.
(connection failed, after activesync is closed in my pc).
(PS: using upgrade_noID)
How can I proceed in this case ?
Help me guys... please...
Rodrigo
Qtek 9090 (blue angel) - WM6 R0 - radio rom 1.06
MS Activesync 4.5
Brazil.
:roll: i by mistake installed the cingularsmt5600-wm2003seROM
in my o2 xphone 2
after installing that the joystick wasnt working
so i reinstalled the windows mobile 2006
but now im not able to login to my network
its fully blocked
i installed the windows 2003 se again
it showed denied searching
please help me
i want to use my mobile again please help
tony1713 said:
:roll: i by mistake installed the cingularsmt5600-wm2003seROM
in my o2 xphone 2
after installing that the joystick wasnt working
so i reinstalled the windows mobile 2006
but now im not able to login to my network
its fully blocked
i installed the windows 2003 se again
it showed denied searching
please help me
i want to use my mobile again please help[/QUOTE
I believe we need more information to be able to help you, like the method you used to update the phone, did you SIM unlock, Application unlock and CID unlock? Can you phone still access bootloader. In many cases, reflashing the same a 2nd or 3rd time helps. I know that when going from WM2003 to WM6, it is bet to install WM5 after WM2003, then go from WM5 to WM6. Perhaps you are making too many of the wrong moves?
If youare currently on WM203, go to WM5 then after WM5, go to WM6. You may also simply have a bad SIM card. If so, your local O2 shop will replace it for you. - Good luck.
Click to expand...
Click to collapse
chang spl
6.0--109(6)
5.0--109(5)
2003se--064
109->064 tools :TyphoonNbfTool