Database Users

T-Mobile WM2003 accidentally installed onto O2 Xda

Hi everyone...I'm a newbie. Been reading all the pages but can't find answer to my q.
I installed T-Mobile ROM 4.01.16 downloaded from ROM kitchen. Unfortunately, now I cannot use the phone on my xda. It simply can't find my phone network. I tried to go into phone options but the phone hang. Otherwise, the rest works fine except it hangs sometimes.
I've tried to install new ROM, one for O2 xda but the error message below surfaced:
ERROR:Get Connection type - An existing connection was forcibly closed by the remote host
error getting connection type.
Now I'm unable to install a new ROM. Even via SD card. Please help.
PS Have also tried using xdatools to unlock. I get the same error message ie the remote host forcibly closed connection

If it's a PW10A-Model that you have try entering Wallaby Bootloader and set GSM settings manually to 900/1800. Installing the 4.01.16 ROM sets the settings to 900/1900. Maybe this is your problem...
HTH
Stefan

Same problem over here
Hello,
I also installed the t-mobile on my o2 xda accidentally,
i already put it on european band frequency 900/1800 via the wallaby editor.
But still i'm not able to put back the o2 wme 2003 on it.
any solutions for this issue ?
thanks in advance,
thomas.

Flash your ROM via SD-Card....

Thanks so much Lumpi. Now my phone works but a different problem crops up. The device once turned off, will not turn on unless I soft reset it. Also, when it is off, the phone will not ring/vibrate when there's an incoming call. The green LED flashes as usual, indicating phone is working. Any idea how to fix this? Thanks inadvance.
another Q: can I use an MMC 256MB card to flash the rom or can i only use SD card?

fadzrina said:
Thanks so much Lumpi. Now my phone works but a different problem crops up. The device once turned off, will not turn on unless I soft reset it. Also, when it is off, the phone will not ring/vibrate when there's an incoming call. The green LED flashes as usual, indicating phone is working. Any idea how to fix this? Thanks inadvance.
another Q: can I use an MMC 256MB card to flash the rom or can i only use SD card?
Click to expand...
Click to collapse
Have you used KSE Truefax? I think that is the problem with not turning on the device....
I think you can also use a MMC Card. Never tried it myself, cause i only have SD-Cards...
Stefan

I've never use Truefax eventhough I have it on the device as I cooked it in the ROM. Any other ideas? Thanks

I had the same problem with 4.1.16 and KSE. It doesn't matter if you "use" it or not. Something about KSE being cooked intothe rom stops the device from operating correctly. To date you are the 5th person I know of to have that problem. Recook the same rom less KSE, reflash, and I can almost garauntee it will work.

thank you everyone....it is indeed the KSE Truefax that was the culprit. I've since invested in a card reader/writer and a 256MB MMC card and my phone works again!
PS special thx to lumpi

tm 2003
I installed T-Mobile ROM 4.01.16 downloaded from ROM kitchen. Unfortunately, now I cannot use the phone on my XDA. It simply can't find my phone network. I tried to go into phone options but the phone hang. Otherwise, the rest works fine except it hangs sometimes.
I've tried to install new ROM, one for O2 XDA but the error message below surfaced:
ERROR: Get Connection type - An existing connection was forcibly closed by the remote host
error getting connection type.
Now I'm unable to install a new ROM. Even via SD card. ROM sets the settings to 900/1900, and I can’t get into Bootloader via SD flashing nor power, soft reset, rocker/action…Any suggestions?

XDA II Mini & SD Wifi Card

When I put in my SD Wifi card into it, it doesn't seem to work. I know that my SD WiFi card is working as it works when I use it on a XDA II.
I went to check the Network Card on the Mini, it does not have the SDIO WLAN adapter in it. Is this normal? Does it mean that I have to install the adapter myself? Where can I find the adapter for XDA II Mini????
Thanks for your help as I am really new to this.
Crus

crus said:
When I put in my SD Wifi card into it, it doesn't seem to work. I know that my SD WiFi card is working as it works when I use it on a XDA II.
I went to check the Network Card on the Mini, it does not have the SDIO WLAN adapter in it. Is this normal? Does it mean that I have to install the adapter myself? Where can I find the adapter for XDA II Mini????
Thanks for your help as I am really new to this.
Crus
Click to expand...
Click to collapse
Install this...
copy to device through ActiveSync explorer.
Goto device's File Explorer, look for the CAB file that you just copied.
Tap on the file to install.

Sandisk Driver
I have an XDA Mini, downloaded and installed the latest driver from www.sandisk.com, have tried both the Wifi, and the combo wifi card, the wifi works well. The combo also works okay, although does have some lock ups, but IT DOES WORK!!!
I have been tyring to export ROM without doing any harm to device as only have it on load for a few more days, as want to bring the SDIO driver accross to my XDA2.
Have noticed the BT is having problems also, and would envisage an update is coming for this to bring up to new version that is on XDA IIs.

henrylim:
Install this...
Click to expand...
Click to collapse
Thanks.
I shall try it when I get off work tonight.
Thanks again.
But one more question, does anyone know if the WLAN adapter should come with the XDA Mini?

You have to install the driver first .
After that no problemos
it work fine ( WifiFofum work very good !!!)

Re: Sandisk Driver
lampard said:
I have an XDA Mini, downloaded and installed the latest driver from www.sandisk.com
Click to expand...
Click to collapse
Hi,
the latest driver from sandisk that you have mentioned, is it this?
http://www.sandisk.com/download/Drivers/wifi/256mb-setup03.exe
or something better?
I'd tried this before in WM2003SE 2.06. No dice. If it works in Magician, I'm inclined to hope that the SDBus drivers has been updated, and (cross my fingers) that SDIO H/W slot is the same.
hmm....something more to be cheerful about during Christmas...

Yep, have a tried a few different versions, and all have worked okay. I had to give back the Mini before I could find the SDBus drivers, as had a similar idea for the XDA2.
Thanksfully still have a XDA2s to play with for a while.

Different version of SDIO drivers
lampard said:
Yep, have a tried a few different versions, and all have worked okay. I had to give back the Mini before I could find the SDBus drivers, as had a similar idea for the XDA2.
Thanksfully still have a XDA2s to play with for a while.
Click to expand...
Click to collapse
I wonder why I didn't look at this before.
The Mini and JAM has the same version of SD drivers:
[HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\SDIO]
"SDMemory"="0.25.00"
"Common"="0.25.60"
"SDBusDriver"="BSQ 1.2 + 0.25.00"
Whereas the 2.02/2.06 has these version:
[HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\SDIO]
"Common"="0.15.10 HIMA"
"SDBusDriver"="0.15.00 HIMA"
Anyone can confirm the 2.20tl version?
The drivers are in the ROM though, and it's not a simple search and replace operation.
I wonder, would it be worth to upgrade the Himalaya with Magician ROM???
I'd quite a few pple now that says that the 256MB SD drivers for PPC 2003 works with the Mini now. I've tweaked the registries for the Himalaya, but only get as far to allow the wlan tools to recognise the card..still no joy.

Guess what...sd wifi of (256 combo) working....
I've managed to get the Wifi portion of the Sandisk Wifi 256 working
on my 206 ROMed XDA2 device.
The steps are abit complicated, so try at you own risks!
The steps are:
(a) download the sandisk 256 drivers from www.sandisk.com (256mb-setup03.exe)
(b) remove your XDA2 device from the cradle, and execute the file.
(c) Goto to the Microsoft ActiveSync folder, and look for this folder "SanDisk Corp\Wi-Fi_WINCE400"
(d) Within this folder, there is a Pegas.2577.CAB
(e) Using WinCAB Manager, open this CAB file
(f) Within the Pegas.2577.CAB file, there is another "SDBusDriver12.CAB" at file index 5.
(g) Now, download the Magician ROM (the SD card version) from the forum's ftpsite.
(h) Using dumprom, dump the contents of the Magician ROM and locate 2 files "SDBusDriver.dll" and "SDMemory.dll"
(i) Replace these 2 new files with the ones in the "SDBusDriver12.CAB"
(j) Re-save the "SDBusDriver12.CAB" and replace the file in "Pegas.2577.CAB"
(k) save "Pegas.2577.CAB" and connect the XDA2 device back to the cradle.
(l) install the Sandisk drivers following the prompts.
(m) Soft reset the XDA2 device when done.
Insert the 256MB+Wifi SD card, and activate the Wifi !!!
You might find that I've gone the long way as I have yet to figure out the full implications of the setup. It doesn't replace the original DLL files in /Windows as the 2 files are installed as CUSTOM SD drivers.
Perhaps we can pool our brains together and crack the SDMemory portion.
I am surfing on my XDA2 device using the Wifi as I am writing this, so I believe we are close to the verge of cracking this.

hello,
I recieved my s100 with the sd wifi/storage card and trying to setup a wifi connection.
I installed the sd drivers and i scanned for an wifi accespoint i noticed that my neigboars are having a wifi acces point.
but i get this message:
unable to obtain a server assigned IP adress.
what i'm a doing wrong?

I can't get wifi to work!
hello,
I just can't get the thing working
I tryed the following:
I installed the driver from scandisk that was on my cd ( the same as mentioned here) everything goes well but i looks like he doens't install the pegas stuff.
I do get a wifi connection link ( settings ->connections -> sandisk wifi
I alsow tryed the tutorial of henrylim but i get stuck at point c becaus there are no files in my activesync folder.
I did try to find wifi networks and i did find a netwerk from my neighboars, i saw there connection if it was securred and mac address an everything.
I didn't get a IP address
@ the AP Browser part i saw it and the connection was 33% there.
But when i go to the status it doens't show anything but that the device is Associating and then the network name.
if i than try to use the internet it wants to use gprs and not the wifi card.
can anybody plz help me I would really like to use the wifi on my magican.

Do you have a DLINK AP ?
If so, ithey do not get along very well

brilca said:
Do you have a DLINK AP ?
If so, ithey do not get along very well
Click to expand...
Click to collapse
i don't really know what you mean.
i was talking about the standard sandisk software and there is a tab called "AP Browser"

what is the brand of the access point wi-fi that you have ?

brilca said:
what is the brand of the access point wi-fi that you have ?
Click to expand...
Click to collapse
bussy deciding whitch one to buy, I'm now trying to access the neigboars netwerk.

Unless your neighbour has specifically allowed you access to his network you will probably not be allowed to connect.
And as long as you're trying with your neighbours access point, brilcas question about the make of the access point would apply to the one they have.

OK I had a wifi connection.
my brother turned his laptop into an AP and i had a connection with it.
So I know the wifi on the imate works but there's still one problem.
When i was connected with wifi and i tryed IE explorer it wanted to connected by using wifi.
How can i change that into wifi?

eltinio,
I am still trying to get WiFi to work on the WM2003SE UK XDAII version...
In response to your question, you need to tap Start > Settings > Connections and then tap Connections (make sure your WiFi card is in and enabled).
Tap the Advanced Tab and then tap the Select Networks button, from the first drop down list select My Work Network and then tap Edit.. > Proxy Settings tab and then tap the 'This Network connects to the Internet' checkbox and then tap OK to save and OK again to exit the connection manager.
You will no be able to browse the internet...

henrylim,
Could you post a link to the WiFi drivers you cooked or provide the file in this thread please so we can all test it out as most people may not able to perform the tasks you have listed to enable the WiFi drivers.
Thanks in advance,
Godz

XDA Mini and SD Wi-Fi
Do you guys know if the SD Wi-Fi card Sandisk or Sockets supports WPA encryption when added to the Mini and also if the problems with Dlink 54G/B wireless access points have been fixed yet?

Strange issues during ActiveSync'ing

When I ActiveSync, I notice my laptop shows that it is trying to make a network connection...then stops trying. A minute later, my K-Jam says it was unable to make a network connection. The strange part is that I haven't setup anything to make a network connection. Any thoughts?
Thanks,
Tom

Upgrade to 4.1
I read somewhere that the Wizard does not sync properly witch any ActiveSync versions before 4.1 (which is not officially out yet).
Check here for info and download: http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=375

activesync 4.x does use ip addresses, if you check this link and then the link in it, you will get some answeres & hopefully all your problems will be solved.
http://forum.xda-developers.com/viewtopic.php?t=32022

I'll check out the link....thanks!!! I have 4.1 installed since I got my K-Jam. I rarely ever used it with my PDA2K, but I have to install programs...damn those exe's...why can't everyone just use CAB files.
Thanks,
Tom

situation that can arise with cab files is they self destruct/delete after the install is completed,
unless you change the attributes to read only

aliendad said:
situation that can arise with cab files is they self destruct/delete after the install is completed,
unless you change the attributes to read only
Click to expand...
Click to collapse
Not if you use CabInstall

Dopod International Web Site - Download System Updated

If you login Dopod Internation Web Site (www.dopodasia.com), You will see a new updated which list as follow:
Item File Name / File Description Download Times
1 Dopod 818pro audio update
Installation:
Save the file to computer.
Unzip the file to any folder.
Ensure that ActiveSync is connected when mobile device is connected to computer using USB cable.
Transfer the AudioDrvPatch.cab file to mobile device.
Run the AudioDrvPatch.cab file to start installation.
After installation, please carry out a soft reset on the device.
Issue Fixed:
To improve the performance of the mobile device speaker.

I just tried installing this on my flashed-to-new-imate-jamin-rom dopod but it doesn't install, so i'm assuming it checks for ROM versions prior to installation. anyone have the same problem as i do? maybe the new imate rom already addresses this issue.

I have the same problem. Mine (818 Pro) was also flash to latest Jamin rom recently.

I have the same problem. Mine (818 Pro) was also flash to latest Jamin rom recently.

Audio Patch
If I'm not wrong....the file is already in the new I-Mate's Ext ROM
Coz I've dump it out... and compared

THX for the info.
It seems not a major fix to me.
All we concern is when will there be A2DP

Another update from Dopod International Web Site (29/3/2006)
1 Windows Mobile 5 update
Fault description/Identification:
1.The problem occur to some customers that are having
hang or slow to their device menu after second or more
sync via their PC or laptop. Please help to install the
below patch to those customers, which they are having
hang or slow problem after subsequence synchronization
with activesync.
2.Note that this will enable user to connect to activeysnc
via PC without disable the firewall issue.
Affected Models:
1.Dopod P100
2.Dopod 900
3.Dopod 838
4.Dopod 818pro
Installation steps:
1.Unzipped the patch to your computer.
2.Connect your device to computer via Activeysnc
3.Copy the cab file into the “my documents” folder
4.In the device itself, use “file explorer” to access
to the “my documents”
5.Tap on the USBSwitch_PPC.cab file and it will auto
install into the device
6.After installed, go to this path StartàProgramàUSB
Switch
7.Under the USB switch there will be 2 options, which,
please select “Serial” as this will enable user to
sync with their computer without disable the firewall.

Thanks a lot !!.....

Strange?? I went to member download but only sees manual. Any idea where do I find it?

disappointed
I screamed in joy when I saw the USB Sync patch but only ended up crying in tears after installing it. I am still faced with the "need to soft-reset after 1st ActiveSync" problem. :roll:
Anyone has this problem solved???

wyhpower said:
THX for the info.
It seems not a major fix to me.
All we concern is when will there be A2DP
Click to expand...
Click to collapse
That's right !!! I'm 100% agree with u...
When will there be a2DP profile released...

sacd54321 said:
I screamed in joy when I saw the USB Sync patch but only ended up crying in tears after installing it. I am still faced with the "need to soft-reset after 1st ActiveSync" problem. :roll:
Anyone has this problem solved???
Click to expand...
Click to collapse
Agreed... But the USB Switch is still useful, cause now syncing is instantanous, although I repair the ActiveStync instead of soft reset, cause even a Hard Reset doesn't work...

Please Help...wifi Problem

I install in htc touch the followings programms
Skype
ewallet
Pocket CM Keybord
sdkCerts + Windows Live 10.6.0034.0800 fixed
Now i go to Comm manager and i press the button for WLAN. The WLAN is dead. When I go to the Setting --> Connections the icon WiFi is disapear.
Please help me....i have bought the mobile 3 days ago with sim unlock,
Please help me

Uninstall everything you can, if it doesn't help, do a hard reset. After installing each CAB, try to use WiFi.

Hi i have the same Problem.
I instlled diverent Rom. Always the same. I cannot activate the Wifi.
What else can i do? Would another Radio Rom help?

I have done many times hard reset but nothing.
archonw? You have install different ROM and still cannot activate WiFi? Have yοu try original ROM?

I THINK I FOUND THE SOLUTION. In folder My Device -->Windows there are some files
There is a file Wrlsmgr. When i open this file then i see something like the Comm Manager. In this programm there is bluetooth and phone button. When i press the button i can activate or deactivate the phone or the bluetooth. I see then that there is no button for WLAN. I go to the files about bluetooth and phone and i see the followings files.
BluethSetting.htm
Bluetooth Explorer
BluetoothSetting.dll
phone.dll
phone.dot
phone.pwi
PhoneSetting.dll
Then I go to the files about wireless and i see the following files.
Wireless LAN
wireless.bmp
WirelessLAN.htm
WirelessService.dll
WLANSettings.exe
WLANSettings.exe.0409.mui
Do you see something strange? I see 2 thing. There is no a file WLANSettings.dll like bluetooth and phone and what is this WLANSettings.exe.0409.mui strange file?
If some want help me please i would like to see if my files is the same as the files in his phone.
Thank you very much