Database Users

Bought a Qtek 9000, first impressions & questions

I bought a Qtek 9000 a couple days ago and I'm pleasently surprised. I heard all the bad stories about the MDA PRO, O2 Exec, ... so I kind of feared the worst. But I took a chance and bought it anyway and the Qtek doesn't seem to be as bad as the other versions.
It does ring when I get called and the ring isn't late. I didn't notice any difference with my previous phone. So that's positive, I didn't change the ringtone on the other hand, so I don't have a large mp3 as ringtone.
Second, it is stable. Haven't had a crash, hangup, program error. Nor does it crash when I receive a SMS. I have received about 10 SMS'es though, not alot i know. The device is pretty snappy, I never have to wait a few seconds when opening programs or changing the screen-rotation. Also when I bring it back from standby, I don't have to wait at all...
I did a soft reset after setting the regional settings and the phone has been on for allmost 5 days. No major RAM issues, although the free RAM is shrinking, stopping applications in the memory-settings does free up some RAM, but not all. When I first booted the device I had just over 30MB free, and it has slowly decreased to about 18-19MB. I haven't installed any extra programmes on it.
So I might consider a soft reset when it reaches 10MB or so. But my question is, is a soft reset bad? Because you can't really shut the device off, you can only put it in sleep/standby. So rebooting it like a normal pc isn't possible. Does a soft reset damange any programs, settings... that's my main question.
Also, what's the best way to keep the battery in top-condition. Charge it when it's at 20% when the device tells you to charge it. Or charge it when you can, because it doesn't matter when you charge...
And one last thing, MSN Messenger doesn't draw the conversation window that well... Sometimes the part of the screen where your received/sent messages are shown is really small (about 3 lines high) and there is a large whitespace under the field where you type your message.
Thanks a lot to the guys at this forum for providing me with the most reliable info about the device, so I knew what I was getting.
Emmerman
PS: I ordered a Brando Screen Protector Plus, any comments, things I should know before I put it on the screen?

This is a good post to read first: http://forum.xda-developers.com/viewtopic.php?t=32218&start=150
Here you will have an is\dea of what to expect between a QTEC and an O2 NEW ROM version have to offer.

Thanks for the link, but I wasn't really looking for a new ROM. As I'm quite new to the Universal, I prefer getting to know the device itself better, before I start doing the more 'professional' things. Besides, I don't have any major issues with the Qtek ROM at the moment.
I just wanted to know a little more about soft-resetting the device and how to charge your battery for best longterm performance. Because I find the manual quite minimalistic.

To soft reset: YOU RETAIN YOUR SETTINGS.
1) Just press the small pin hole found at the back of the Universal right beside the USB plug.
To hard reset: YOU LOOSE YOUR CURRENT SETTINGS. BACK TO FACTORY SETTINGS.
A) Method One
1) Go to Start.
2) Go to Programs.
3) Go to Clear Storage.
4) Type in the code: 1234
5) Press YES.
6) Wait for the automatic reset.
B) Method Two
1) Press and hold the two keys with this mark (-) at the same time found at the top most part of the keyboard.
2) While pressing these 2 keys, press the pin hole found at the back of the Universal for 1 second.
3) You will notice a reset and a blank screen will appear.
4) It will prompt you to either press X or 0.
5) Just choose which one you prefer.

emmerman said:
Does a soft reset damange any programs, settings... that's my main question.
Also, what's the best way to keep the battery in top-condition.
PS: I ordered a Brando Screen Protector Plus, any comments, things I should know before I put it on the screen?
Click to expand...
Click to collapse
1) No, a reset both hard and soft does not damage your Universal. A soft reset to clear out the memory is good to speed up things better.
2) The best way is to leave it charging for more than 16 hours the first time. Unplug and use it till it drops to around 15% then charge it fully again, this time it does not need the 16 hours. Just wait for the green light indicating a full charge. After following these first two, just keep it plug-in before going to sleep at night making sure you got a full charge for the next morning.
3) I don't know about Brando's screen protector but I used Proporta's screen protector which included a wipe cloth and a screen spreader. I've had my screen protector on before I started even charging and using my phone. Another tip is to use a small peice of tape to take off some dust or specs that might have stuck on the screen before applying the screen protector. Sometimes even with the wipe there are still dust residues. You can also use the tape to clean the side of the screen protector that is going to stick on the screen.

Isn't a soft reset similar to pushing the reset button on your desktop? So couldn't you loose cached data that is in the RAM, because it wasn't written to ROM yet?

emmerman said:
Isn't a soft reset similar to pushing the reset button on your desktop? So couldn't you loose cached data that is in the RAM, because it wasn't written to ROM yet?
Click to expand...
Click to collapse
I had never lost any data after a soft reset. It free up unused memory that was being kept by the system for faster processing. Plus WM5 has persistent memory now. May be that was the difference?

So in fact, you can't shutdown a Qtek? You can put it in standby modus, but the phone is still working then. And resetting it, is just rebooting it. So if you want to take out your SIM card, you have to take the battery out while it is actually running?

You actually can turn you device off, with a little help of some small programs, like PsShutXP for example.

Hmm, thanks for the info. I will look into that one, but at the moment I'm still very hesitant to install any third party applications on my 6-days old precious.
One other question, does the led blink orange when you receive a SMS. Because now it doesn't, it blinks green, like normal. But I seem to remember the first I got it, it blinked orange. Or am I confused.

@emmerman
You are right you can lose data. I have lost emails and other users have reported loss of WEP keys etc. But I have never had this problem with Symbian devices.

emmerman said:
One other question, does the led blink orange when you receive a SMS. Because now it doesn't, it blinks green, like normal. But I seem to remember the first I got it, it blinked orange. Or am I confused.
Click to expand...
Click to collapse
Can anyone answer this one.

Go to Start>Settings>Sound and Notifications>Notifications Tab>Choose the event you wish to correct.
The changes in any settings never occurred on mine nor any type of freezes. Something I am glad about.
What I did when I first turned on my device, off from the box or right after a hard reset, was to go through those settings and made sure they are all configured the way I want them to notify me. This is the only difference I could possibly think of why others have disappearing settings on notifications.

NEED HELP MDA GOING CRAZY(willing to pay)

My MDA IS GOING CRAZY!! Every time I press the power button to take the phone off of the standby mode the phone seems to randomly just open up contacts and then try to delete one of the ones that are first on the list. Also the two soft buttons aren't working. the keyboard, some of the letters aren't working either, and every time i press the left softkey on the keyboard the menu on the right always opens up when I am on the internet. For some reason it just started acting like that when I increased the size of the cache. This one time all the keys worked for like 5 minutes the other day, then they went back to not working. I already did a virus scan and nothing came up, so yea. I am willing to pay if needed to the person through paypal, whoever helps me fix up my mda. NEED HELP!!!!

Have you tried updating to a newer firmware?

Are there any magnets in the immediate vicinity of the MDA?
I know it sounds crazy but even the magnet on the included t-mobile case can do things like switch the screen to landscape or bring up the calender.
It's just a thought and a possibility.

nope no magnets, and the rom is the 2.6 one, the newest rom, dunno what wrong with the phone, im willing to pay to fix it up. whoever helps me fix it up, i will pay them.

if i were you, (thankfully i'm not because i have had enough problems with my XDA!! lol) i'd do a hard reset, but i'll assume you can't do that because of the mind of its own issue, so power down the phone, and leave it on charge so there's atleast 50% battery in the phone. meanwhile, goto the t-mobile website and get the latest rom (or re downlownload the rom that's already installed...2.6 i think u said?) and try to upgrade using bootloader. todo this, hold the camera and the power buttons until a funny screen comes up, run the update utility, and then plug in the phone to the firewire cable (then onto the usb) on the first screen of the program (if that makes sense). then run the update utility and that should work.
there's no reason why it shouldn't. i had a similar problem with a se w800i about a year ago, and it turned out a button was stuck down, so check that.
i hope you get it sorted, as i kno how frustrating these phones can be.
thepolice

thizzmaster said:
My MDA IS GOING CRAZY!! Every time I press the power button to take the phone off of the standby mode the phone seems to randomly just open up contacts and then try to delete one of the ones that are first on the list. Also the two soft buttons aren't working. the keyboard, some of the letters aren't working either, and every time i press the left softkey on the keyboard the menu on the right always opens up when I am on the internet. For some reason it just started acting like that when I increased the size of the cache. This one time all the keys worked for like 5 minutes the other day, then they went back to not working. I already did a virus scan and nothing came up, so yea. I am willing to pay if needed to the person through paypal, whoever helps me fix up my mda. NEED HELP!!!!
Click to expand...
Click to collapse
Ok, you need to give more info. What IPL/SPL, Radio, version, etc. etc. What other steps did you follow? Downgrade to 1.08 unlock? CID unlock? Upgrade to 2.26? Then flash whatever ROM you are using...and which ROM is it? What other apps have you loaded? How old is the phone? Who is your service provider? What is your bank account number? (ok maybe we don't need that one haha) What SD card are you using? Have you dropped the phone?
--M

uuh, i haven't dropped the phone at all. Its unlocked, and I changed the network settings so that I get unlimited internet and other data transfers for free. I have Tmobile prepaid. Other than that I am going to try to hardware reset it, tried it already, it didn't work. So, I will try to update the rom, the phone is unlocked, so if I update the rom hopefully it wont become locked again.

It won't become locked again, it sounds like a hardware problem it is most likely a button or key on the keyboard is getting stuck and/or shorting every so often causing this behaviour.

Have you recently loaded any apps? Maybe changed the key settings? Deleted a file by mistake?
How large did you make the cache? What program did you use to change the cache? Did you change anything else besides the cache?

uuh i made the cache to 4 MB and I did change the settings for the IE but I changed them back, I used Resco Registry Editor, also I went to this website to find the registry tweaks http://www.pocketpctweaks.com/pocketpc_tweaks/
Then I went to the 2 performace tweaks:
http://www.pocketpctweaks.com/pocketpc_tweaks/speed_up_your_pocketpc
http://www.pocketpctweaks.com/pocketpc_tweaks/increase_performance_speed
I also did this one on the IE using Resco Registry Editor:
http://www.pocketpctweaks.com/pocketpc_tweaks/change_pocket_internet_explorer_6
Other than that I haven't done any other ones, I tried overclocking by using a software called Omap Clock, but that software sucked, it would be overclocked for a while, and it would return back to the default speed whenever I would press the power button to put it on standby.

if i were you..
if you are willing to pay for those who ever fix you phone, i'd rather pay my nearest service center to fix my device.

x7501 trouble with wake-up.

I just got my advantage a couple of days ago. i haven't had much time to use it yet, because of work. i haven't installed any sofware. Sometimes my device simpy won't wake-up. After soft feset, the only thing i did was connect a bluetooth headset, which worked fine. I turned off the screen, and when i came back to my device, about two hours later, it would not wake-up. I had to soft reset. This has happened a few times. Also, its very slow with entering text (When i finished typing the word 'text', 'soft reset' was just being entered on the screen.) It would be worse, but i stop to let it catch up, and check for typos.
It is really annoying to buy a new device and have to put up with this crap. Any help is appreciated.

If it were me, I would try a 'Hard Reset' and if that did not clear up the problem, call HTC for a warranty replacement. Hard Reset is hold the volume slider down while clicking the reset button on back of the device.
Brad Miter

I'm not having the issues with it not waking up, but recently I've had the issues with randomly occuring extreme slowdown, similar slow text entry, quick battery run down and insanely slow screen redrawing and general responsiveness to hardware of screen based input. I've tried soft resets, hard resets, trying to isolate software that might be causing it. So far it seems that the Illiumsoft Newsbreak feed reader I had been using for months without issue might be related to the problem, but I'm wondering if the problem isn't software specific but actually just related to data downloading activity. Thus far, I'm a couple days in without Newsbreak and no occurances of the problem...

Have you tried tapping the button on the lower right side of the phone (power button) sometimes mine does the same thing, good luck...TJ

i am going to hard reset, but with no software installed i dont know that this will help. i am considering switching to the (whats it called, black touch) rom. i dont know f this will help my current issue, but it sure looks nice. on all of my previous devices, i've always used the factory rom, and i'm somewhat clueless and intimidated by the whole process. I just dont want to screw up my new device. if anyone can help with any of these issues, please do.

TrekkerJmm said:
Have you tried tapping the button on the lower right side of the phone (power button) sometimes mine does the same thing, good luck...TJ
Click to expand...
Click to collapse
That's the problem, when i press the power button, nothing happens. I have to soft reset to get the device to come back on.

miterb said:
If it were me, I would try a 'Hard Reset' and if that did not clear up the problem, call HTC for a warranty replacement. Hard Reset is hold the volume slider down while clicking the reset button on back of the device.
Brad Miter
Click to expand...
Click to collapse
Concerning the warranty replacement, i bought this from a guy on ebay. It was still in the sealed box with compusa sticker on it, but i'm not sure if the warranty is transferable. Maybe if i could get him to send his receipt I would covered at least from his date of purchase. Anyone know specifics about the manufacturers warranty?

weaselcossey said:
i've always used the factory rom,
Click to expand...
Click to collapse
Well that's your first mistake...

Confucious said:
Well that's your first mistake...
Click to expand...
Click to collapse
Perhaps you could help me fix that problem by telling me how to install the black touch rom without screwing it up.

I'm obviously no developer, nor expert in any type of computer skills. I come to this forum because I love the device, my issues are usually resolved after some discussion here, the people are mostly friendly, and i'm interested in making my device better. I just need some help to do so.

weaselcossey said:
That's the problem, when i press the power button, nothing happens. I have to soft reset to get the device to come back on.
Click to expand...
Click to collapse
If you press the power quickly and lightly it should come back to
standard Today screen versus pressing and holding which brings up
the power off "pop up",at least that how my 7501 responds.
You may want to try that hard reset then play with Start/Settings
/System/Power.

bigtsr said:
If you press the power quickly and lightly it should come back to
standard Today screen versus pressing and holding which brings up
the power off "pop up",at least that how my 7501 responds.
You may want to try that hard reset then play with Start/Settings
/System/Power.
Click to expand...
Click to collapse
i understand that the buttons respond differently depending on how you press them (press and release, press and hold, etc.) The problem is sometimes, usually when i'm working and away from my phone for awhile, the device simply won't wake-up (power button or any other button pressed in anyway does nothing.) after a soft reset eveything seems fine. this has probably happened 4-5 times in 3 days. After hard reset its only happened once.
Sometimes my device doesn't seem to respond when i plug in the charger, nothing lights up. I've also noticed everytime i check .the battery meter, its alway a denomination of 10 (10%, 20%, 30%). I was sure this was going to be a great device, but i'm beginning to have my doubts.

weaselcossey
I had experienced this before but it is so rare that it's hardly worth mentioning. Are you using WM5 or WM6?
It is normal that the battery strength shows in increment of 10%.
If hard reset does not solve the problem, I would try to re-flash the ROM and see if the problem goes away.

eaglesteve said:
weaselcossey
I had experienced this before but it is so rare that it's hardly worth mentioning. Are you using WM5 or WM6?
It is normal that the battery strength shows in increment of 10%.
If hard reset does not solve the problem, I would try to re-flash the ROM and see if the problem goes away.
Click to expand...
Click to collapse
i'm using wm6, i'm currently using the factory rom on my advantage x7501, but planning to upgrade this evening.

HTC HD power off problems

Hello,
I have a problem with my HTC HD. From time to time it shuts down without any reason. When I press the power button I can see the Windows Mobile starting...
Did any body else had this problem?
Is there a solution for this?
Thank you

perhaps your battery is not positioned properly or sitting a bit loose? Try a post-it (or something else thin) on the back of the battery cover..

Mine shuts down and won't turn back on without a reset every time I'm in an area with no signal, it basically stays off while I'm at work.

if you keep getting these kinds of nondescript errors and it survives a hardboot, basically there are three options left:
1) try to flash a different firmware or
2) take it back to the store (flash back first)
3) hope like hlll some guru here gets an eyefull of your problem and knows a quickfix (slim chance seeing the number of daily new posts here and the typical guru tendency towards development as opposed to a supportdesk)
I'd set my hopes on 1) or 2). Good luck however you choose.
Cheers,
Rick

Guys,
I'm having quite the same problem: the touch HD keeps turning on and off automatically, as if the power button is pressed (but its not).
Moreover, the power button just don't work. I press it and nothing happened.
I have master reseted the phone and also have changed its ROM, but the problem stills.
Unfortunatelly I'm start thinking that its a hardware problem.
I guess that a solution shoul be reassing the power button, disabling it. Is there any app through which I can reassing the power button?

Have you solved the problem? I have a similar prob, my power button doesn't seem to work when i press it, and if i soft reset (through HD Tweak) when it boots I get a warning message saying " Warning your device will power off and you'll lose your data, Yes No".
It's like the button is half pressed all the time.
Couldn't find any info on hard key remapping either.

I used to have a similar problem but it was with the screen....
The screen used to turn off suddenly without a reason but the phone is turned on and I keep receiving calls. After returing back to my Supplier in Egypt they replaced it with a new one after testing it for three days.
I'm using the new one sine 20th of December 2008 and nothing happened again

Well if you guys are in the US (or have HSDPA/UMTS disabled) then re-enable them (that should hopefully get rid of the restarts in low-to-no-signal areas).
Hope it helps

[Q] HTC HD2 Secret Codes & Reset Method Needed

Tried to use the search function, but got nothing, so make a new thread.
1. need to check my phone's sim lock status. I don't have a sim from other carriers in hand. Thinking maybe there are some 'Secret Codes' like (*#06#, *#*#4636#*#*), to check my phone's sim lock status.
2. Is there any way to reset the phone without opening the back cover? I know we can reset the phone by removing the battery or pushing the reset button...
But....... I am using a TPU phone case, if i need to open the back metal cover, I will need to take off the TPU cover first. As you konw, that TPU thing is really too fit too tight to be removed (using my phone a lot to play games, it dies occasionally)
Thanks!

ken_oy said:
Tried to use the search function, but got nothing, so make a new thread.
1. need to check my phone's sim lock status. I don't have a sim from other carriers in hand. Thinking maybe there are some 'Secret Codes' like (*#06#, *#*#4636#*#*), to check my phone's sim lock status.
2. Is there any way to reset the phone without opening the back cover? I know we can reset the phone by removing the battery or pushing the reset button...
But....... I am using a TPU phone case, if i need to open the back metal cover, I will need to take off the TPU cover first. As you konw, that TPU thing is really too fit too tight to be removed (using my phone a lot to play games, it dies occasionally)
Thanks!
Click to expand...
Click to collapse
can't suggest anything for question 1, maybe someone else will come along and provide some answers.
regarding question 2, the following works sometimes on the android build i am using currently (XxXPachaXxX's GBLeo Sense, details in signature):
1. when you feel like rebooting, hold down both volume buttons
2. keep holding down both the volume buttons
3. tap the power button and keep holding the volume buttons
4. this key combination is used for a hard-reset i believe. so in case the phone reboots into the hard-reset screen, just cancel out of it and let the phone reboot normally!
i currently have another HD2 (a friend's) that has WM6.5 on it (some version of NRGZ's Energy ROM Series). i just tried the above process on it 3-4 times but it did NOT work.
it might not work on other android builds either. but i know for a FACT that it works on the one i have currently...i do it almost every day! the ROM suffers from a problem in which the screen refuses to wake up (but the device keeps running because it rings, you can't see who is calling, and you can answer it, and have a full conversation!). this happens randomly about once every 1-2 days. and the above mentioned trick works every single time for me when my device is in that particular state.
so to summarize, the trick doesn't seem to work on WM6.5. it might work in some/all android builds. it might only work on android when the device is in some kind of "stuck" state.

Your reset method works. Thanks! I don't have to take off the TPU case just for a simple reset now.
The combination will lead to the hard reset screen as you described, and can be cancel by simply pressing the 'back' key.
Running the HyperDroid android rom, have no chance to test wm6.5 yet. But now it works. Thanks!!
ASCIIker said:
can't suggest anything for question 1, maybe someone else will come along and provide some answers.
regarding question 2, the following works sometimes on the android build i am using currently (XxXPachaXxX's GBLeo Sense, details in signature):
1. when you feel like rebooting, hold down both volume buttons
2. keep holding down both the volume buttons
3. tap the power button and keep holding the volume buttons
4. this key combination is used for a hard-reset i believe. so in case the phone reboots into the hard-reset screen, just cancel out of it and let the phone reboot normally!
i currently have another HD2 (a friend's) that has WM6.5 on it (some version of NRGZ's Energy ROM Series). i just tried the above process on it 3-4 times but it did NOT work.
it might not work on other android builds either. but i know for a FACT that it works on the one i have currently...i do it almost every day! the ROM suffers from a problem in which the screen refuses to wake up (but the device keeps running because it rings, you can't see who is calling, and you can answer it, and have a full conversation!). this happens randomly about once every 1-2 days. and the above mentioned trick works every single time for me when my device is in that particular state.
so to summarize, the trick doesn't seem to work on WM6.5. it might work in some/all android builds. it might only work on android when the device is in some kind of "stuck" state.
Click to expand...
Click to collapse