Database Users

on/off button doesn't react...

Just bought mij S100 and already a problem. My phone automatically shuts down the display, this is nothing strange. But when I want to turn it back on again using the on/off button, sometimes it does not react (sometimes it does). When this happens, i also cannot receive any calls. I tried to call myself with another phone and it did not ring. It looks like a crash to me. When I do a soft reset it works again.
I have the newest Qtek rom (1.12.00 WWE / 1.12.550 WWE) installed. Originally the phone came with T-mobile software.
I hope someone can help me with this problem.

If there is a problem with the power button, then you can go into Settings - Button Lock - do not lock buttons. This way you can turn on your device using any of the green or red buttons.

hi robbertje,
sometimes i have the same problem on my MDA compact (=imate S100).
on/off button does not respond - display dark.
soft reset resets the MDAc and everything is ok.
then a few days no problems. if this problem occours then more times.
I found out that if my MDAc is in this state and if I pull the SD Card out of the device, the screen is on but frozen. The time which is shown an the screen is not correct. Seems that it shows the time when the device went to the freeze status.
Also battery is very low after such problems.

I used to have it when I first upgraded to big storage. A hard reset seemed to fix the problem. What I found was that the screen would react, but it could be up to a minute after I hit the power button. Same thing when the screen was on, I'd hit Start and wait. After a while the start menu would pop up. This was before I even managed to install any other software so it's a windows bug that's fairly random. I haven't had it happen for a few months now, though.

I think PPCProfiles made the problem. I reinstalled PPCProfiles and it seems that the problem is solved but I will see ..................

Hey, I've already ur problem. It's an hardware problem!
The mess is that, when the PDA is cold (strange, huh?) it won't reactivate, causing to do a soft reset. Mystically, the LEDs are still functioning (I mean, if it's green, it will continue to blink BUT doesn't change for any reason)
The only way to fix it is to send it to the repairing center. Sorry for who is out of warranty.
Cheers,
MocciJ

new ROM?
In this topic: http://forum.xda-developers.com/viewtopic.php?t=25761 it is said a new ROM wil fix the problem ...
Is this possible?

check http://forum.xda-developers.com/viewtopic.php?t=27956&highlight= too - may not be relevant, but it shows that power button wierdness can actually be the result of a dodgy battery.

remove your battery,and wait 1 day,my problem solved this method...

Touchscreen Unresponsive After Sleep

Anyone else have this problem? Sometimes, if the screen goes to sleep, when I wake it back up, the touchscreen is unresponsive. I have to soft reset to get it to start up again. Any ideas on how to fix it?

I had the same problem, and flashed another rom, and problem gone.

Hello guys,
I was just searching through the forum with this exact problem and found this thread.
If the phone wakes up from sleep the touchscreen is unresponsive for a few seconds. If I insist to press it it only takes longer for it to respond. This is a very big problem because I sometimes miss calls because I can't answer them. Not even the for hard buttons don't work (maybe because they are also touchscreen).
I've tried flashing different ROM's (Miri, Dutty, NRG) even flashed back to the standard one and again back to a 6.5 one (as I saw this step fixes a lot of problems for some people) but the result is the same. I'm running out of ideas.
I don't think it's a hardware issue because if i leave the phone until the backlight dims and touch it, it goes back on, so it registers the press but doesn't act on it.
It's a very serious and I'm hoping someone here has a solution.

Nobody else is having this issue? Is there no hint on what is going wrong with our phones?
It appears it's happening more and more often and the screen is dead for more and more time.

Hi
I have had the same problem but solved tonight
There are many threads about this but no real solution I tried them all.
My first HD lasted till last week when I had to replace it because of a "Newton Ring" problem. In 10 months of ownership I got a screen freeze maybe 5 times.
My new replacement arrived last Saturday - same original Orange Rom and radio.
I have loaded exactly the same programs from the old phone and have found that when I put it in sleep mode via the power button its a 50/50 chance of it waking up. Receiving a text message does not wake it up either.
I can hear the volume control working and the haptic buttons provide feedback - but black screen. If I hold the power button down I get the bleep to ask if I want to power the device off - then all goes dead. If I wait 5 minutes the haptic buttons/volume buttons work again and the screen comes alive revealing the yes/no option to power off.
Also strange whilst in this locked state the orange charging light comes on - when it goes off I know i can wake the screen up !
I tried :
Enabling and disabling the Today Screen timeout
Auto adjust backlight off and on
Different screen brightness
Manual/default operator selection
Checked HD Tweaks settings were correct in registry and things I can't remember.
What has worked :
Start - Settings - System - Power - Advanced and unchecked the box "turn off device if not used for 5 minutes"
The daft thing is this was enabled on my old phone and would always wake up with a text/call or power button push !
What has changed ?
r
Andrew

Update - Found the problem
Whilst the above fixed my freeze problem it has been bugging me why - as the advanced power features are useful and I don't always remember to hit the power button to sleep the device.
I have now realized what was not set up the same as my old phone.
No start up password !
To enable this I found this thread http://forum.xda-developers.com/showthread.php?p=5004821 and changed my registry setting to 0.
This immediately takes you to the lock screen where you can now enter your password details and make them stick.
I now have a start up password and can set the timeout to 24hrs.
All the power settings now work correctly - and no screen freeze
r
Andrew

Spoke too soon
3 hours ago went to use my phone - black screen
Connected via activesync and MyMobileR.
Rebooted and got the "Microp Version Mismatch 0" message.
Checked out threads about this error on the mainly Diamond forum and can confirm my screen is well and truly dead.
Contacted Orange and they are sending another replacement tomorrow.
What p*sses me off is the number of hours I have spent to get one normal days use.
r
Andrew

Sorry to keep posting to this thread - but I am hoping that my experiences may help somebody
As said I am getting a replacement tomorrow and in one of the threads a guy said put it in the fridge for 20 minutes !
Well I thought what the h*ll and did.
Wrapped it in some tissues to absorb the condensation when I took it out - replaced the battery and it works - no Microp message and has behaved ok for 6 hours.
Got to be a hardware issue ?
Your thoughts.............
r
Andrew

Hi Bigfish,
please let me know the phone is still ok after more hours out of the fridge. i have similar problem on my HTC touch- ELF and i have been searching for solution, and i found this
http://www.fixya.com/support/t982721...not_responding .
i do not have tools to open it myself and would like to try it.
if you r familiar with it please let me know.
cheers
M.

Hi
Sorry your link is not working.
As to the phone it was still ok 26 hours later when I had to exchange it for my replacement.
Weird !
r
Andrew

Hi Andrew,
the fridge trick did not work for me. i kept searching for solutions and i found out that the problem is the digitizer (the touch screen). it might have received a shock (dropped on the ground) or other unusual pressure (in the pocket), and the digitizer gets out of initial position. the digitizer takes that contact as a tap -a continious tap- and does not respond to other taps. you might have to open the device and reposition the digitizer or replace it is there is some damage.
cheers
mumur

Sorry to hear that.
My replacement phone - so far has behaved perfectly.
r
Andrew

it strikes me that if I shake the phone that the phone jamming. I get no response. Even when I tap my finger hard against the rear top I get a crash. The only solution is to take out the battery and reboot. I think it has to do with a hardware problem.
there are others who also suffer from it?

Strangest touch screen loss problem! + SOD / QUICK WAKE UP TEST WITH YES/SEND KEY.

17/9/2010 EDIT: With a lot of feedback from this thread and other threads, it has come out that, waking up the phone with the YES/CALL/SEND green button is BETTER than waking up with the NO/END/POWER red button for SOD reasons.
----
Hello guys,
You probably know I am actively in the Android HD2 porting community.
I am having the strangest touch screen problem. I am really experienced into winmo and android stuff. Please read carefully.There is a surprise at the end.
BOTH under Android AND Winmo my touchscreen works just fine after bootup.
It first started like this:
At first my touchscreen stopped responding when I hold no button to make a reboot/power off. I thought it was from the usual Android touch screen freeze related to g sensor. Then I realized that it was the same in Winmo! Holding no button ALSO caused touch screen to die even under winmo.
Then it started loosing touch after sleeping. My touch is ALWAYS working when I boot winmo OR android and works for hours if not put to sleep. But it stops working after putting it to sleep.
Frustrated,
I restored with spb backup. Didn't work.
I reflashed my winmo rom. Didn't work.
I made a hard reset. Didn't work.
I removed sd card. Didn't work.
I removed sim card. Didn't work.
I changed the date. Didn't work. (this was a strange fix for some blackberries)
I flashed original 1.66 Turkish rom, 2.07 original old radio, even original 1.42 SPL which makes this hd2 fully stock the day I bought it. Even made another hard reset. Still didn't work!
By this time it's obvious this is a hardware problem and needs warranty.
OK
THEN I FOUND THE STRANGEST THING:
If I wake up the phone with ANY hard button other than the NO/HANGUP button touch screen WORKS!!! (Yes/Send button under Android)
BELIEVE ME, I HAVE TRIED FLASHING REFLASHING RESETTING AND TESTED 100 TIMES and YES it is ALWAYS the same. This is not a random thing.
If I wake up my phone with No button under ANDROID OR WINMO, my touch doesn't work. But if I wake up with back button windows button home button yes button, the phone wakes up properly AND touch works. Android of course doesn't work with the original radio, so I wasn't launching Android with the last test.
HOW IS THIS POSSIBLE AT ALL?? It looks like hardware fault, but touch loss IS related to NO button!
I will send my phone to warranty anyway but it will happen after the holiday (not before mid september)
IF ANYONE have an issue like this, PLEASE post.
I just want to make sure this issue isn't related to Android porting. If it is, this might be an important info. Maybe it may help devs fixing the general touch screen and wake up problems. Also everybody TRY waking up Android with the yes/send button to see if it helps with your wake up or sod issues and provide feedback. Also it may help with the phone not responding after hangup in Android. There is something hardware going at the background with the no/hangup button. I know this issue is hardware fault but still may shed light to our problems with touch screen and wake up issues. Maybe there is something hardware or firmware inside the phone waking up the digitizer. I know that hangup/no/end button is internally different than the other buttons, something like it shares the power button function that is usually on the top of the device with other htc devices. (Mine is a european hd2 and the hangup button is not red) I also wasn't using an overclocking kernel.
Please think twice before posting, and don't post anything useless. I am absolutely no noob, you can search my previous 200+ posts. I wouldn't post anything unless I am definitely sure. And I have a feeling that this thread has the potential to help or make something come out. If it doesn't, no harm done.

since most of the time inwinmo or android the no or yes button pop up generally on the same side in both os's and , taking in consideraton it might be a hardware issue , i would say you issue might be a harsware issue undr the screen when you touch no...wild guess

I was the same problem.... but it is even worst for me now...
Before, at least work touch others buttons... now my touchscreen DON'T WORK. :-(
I suppose that it's a hardware problem :-(

memin1857 said:
Hello guys,
You probably know I am actively in the Android HD2 porting community.
I am having the strangest touch screen problem. I am really experienced into winmo and android stuff. Please read carefully.There is a surprise at the end.
BOTH under Android AND Winmo my touchscreen works just fine after bootup.
It first started like this:
At first my touchscreen stopped responding when I hold no button to make a reboot/power off. I thought it was from the usual Android touch screen freeze related to g sensor. Then I realized that it was the same in Winmo! Holding no button ALSO caused touch screen to die even under winmo.
Then it started loosing touch after sleeping. My touch is ALWAYS working when I boot winmo OR android and works for hours if not put to sleep. But it stops working after putting it to sleep.
Frustrated,
I restored with spb backup. Didn't work.
I reflashed my winmo rom. Didn't work.
I made a hard reset. Didn't work.
I removed sd card. Didn't work.
I removed sim card. Didn't work.
I changed the date. Didn't work. (this was a strange fix for some blackberries)
I flashed original 1.66 Turkish rom, 2.07 original old radio, even original 1.42 SPL which makes this hd2 fully stock the day I bought it. Even made another hard reset. Still didn't work!
By this time it's obvious this is a hardware problem and needs warranty.
OK
THEN I FOUND THE STRANGEST THING:
If I wake up the phone with ANY hard button other than the NO button touch screen WORKS!!! (Yes button under Android)
BELIEVE ME, I HAVE TRIED FLASHING REFLASHING RESETTING AND TESTED 100 TIMES and YES it is ALWAYS the same. This is not a random thing.
If I wake up my phone with No button under ANDROID OR WINMO, my touch doesn't work. But if I wake up with back button windows button home button yes button, the phone wakes up properly AND touch works. Android of course doesn't work with the original radio, so I wasn't launching Android with the last test.
HOW IS THIS POSSIBLE AT ALL?? It looks like hardware fault, but touch loss IS related to NO button!
I will send my phone to warranty anyway but it will happen after the holiday (not before mid september)
IF ANYONE have an issue like this, PLEASE post.
I just want to make sure this issue isn't related to Android porting. If it is, this might be an important info. Maybe it may help devs fixing the general touch screen and wake up problems. Also everybody TRY waking up Android with the yes button to see if it helps with your wake up or sod issues and provide feedback. Also it may help with the phone not responding after hangup in Android. There is something hardware going at the background with the no button. I know this issue is hardware fault but still may shed light to our problems with touch screen and wake up issues. Maybe there is something hardware or firmware inside the phone waking up the digitizer. I know that hangup/no/end button is internally different than the other buttons, something like it shares the power button function that is usually on the top of the device with other htc devices. (Mine is a european hd2 and the hangup button is not red) I also wasn't using an overclocking kernel.
Please think twice before posting, and don't post anything useless. I am absolutely no noob, you can search my previous 200+ posts. I wouldn't post anything unless I am definitely sure. And I have a feeling that this thread has the potential to help or make something come out. If it doesn't, no harm done.
Click to expand...
Click to collapse
BIt strange this one to be honest I think it may just be your device as there are now hundreds of users of android on the hd2 and this is extremely rare. Hopefully a dev will look into and find a possible solution but I doubt it. If I was you I would put it back to stock and send it off to HTC for a new one. Even if a dev manages to find the problem you will have a new or as new hd2

I have been trying and I must say that I sort of do share your experience. The most left button (referred to as yes) awakes the phone just right as where the most left (No) takes its time to start the phone. I haven't had any noticable touch issues that could be related to these hard buttons yet.. (I think)
But I do think you have a point.

Interesting, I had something similar. I was using elegancia rom v1 for the longest time, with all my android builds, no problems. Then I went to chunkydroid rom, and had a few issues, with multiple android installs (one of which was my original that was working before.)
Then I rebooted into chunkydroid, (windows), and had the same issue. It was strange. I tried a few other roms, same problem. Turned off the phone, next day, reflashed chunky again, and hyperdroid 1.1, no issues since. (Only difference, which I don't know if it's related, but again, might help, is that I was overclocking. I have since not let anything go above 998 in setcpu, and even removed all builds that were overclocking. I though it might have had something to do with it (and the phone wasn't warm at all.)
I have not been able to duplicate the problem since though (even with overclocking just to see). So I'm pretty stumped. I'm sure the devs will work it out.

I have taken to pressing the yes/send key to wake up my phone as it seems more consistent than pressing the end key. My theory is that multiple wake up/sleep messages are being sent on the end key and the system gets confused. Some sort of debounce might help.
Just my thoughts.
Running shui8 realstock rmnet with micyprima r9.

It seems waking up the phone with the Yes/Send button somehow seems better with current builds and kernels.
I am asking everybody reading this thread to try waking up their Android devices with the yes/send key and share their experience if it is making their Android wake up quicker with less SODs.
Note: I am still using yes key wake up as a workaround for my hardware touchscreen fault. Still absolutely works everytime. I found out that if I accidentally try to wake up with the no/hangup key I need to wait about 10-15 seconds before yes/send key does its magic again.

well, i tried there is absolutely no difference between any hard button. if i have sod, none of them solves... actually its not sod i think, when you try to put standby and wake up several times quickly, screen stops responding for a while. you need to wait at least 15 seconds between each standby and wake up. can i fix this? or this is the sod?

Waking up with the yes/send button would not make any difference if your phone can wake up good with the no/hangup button already. But we are trying to find out if yes/send button wakes up better in long term usage. (no/hangup button sometimes can't wake up and that is the sod refers to)

SOD happened to me few times too with the NO/Hangup button and if/when that happens, if you press NO/Hangup button for long(for the menu with the turn off the phone,reboot,plane mode,...etc options) screen comes back BUT sometimes it locks the screen brightness to lowest possible setting(with %0 actually it doesn't completely turns off as you know).
Other than that "bug" NO/Hangup button works fine for me but as the OP, YES button is more stable and no SODs happen with the YES button...
Btw there is no difference for me YES button vs NO/Hangup button by means of quickness... Both works the same speed unless of course there is no SOD with the NO/Hangup button...
Just wanted to share my experience...

This thread is awesome
Thanks for this thread. I have been trying to use any android build for at least a full day with no success. Ive used different winmo roms and radios such as chucky and miri roms. I still ran into sod's. After waking with the yes/button i have had no sod issues since then, Once again awesommmmmmmme thread.

After some time my digitizer died almost completely. (Issue became worse) It is currently being handled under warranty. (digitizer is replaced)
But at least with a lot of feedback from this thread and other threads, it has come out that, waking up the phone with the YES/CALL/SEND green button is BETTER than waking up with the NO/END/POWER red button for SOD reasons.

any solution to this issue yet because i just started having this exact same problem w/ my HD2 yesterday before that it was perfectly normal and all the suddon the Power/END/NO button wake up cause the screen to not respond to the touch at all however wake up w/ home,back,menu,call button the touch screen works is back to normal
still can't figure out if its a hardware or software problem cause i also tried flashing bunch of roms/radios/and android roms as well and even went back to stock rom in hope for a solution

waking with green is about 2s faster for me.

Same thing happens to me before 2 days.I tried many hard resets,roms,radios and my screen didnt work.I couldnt even login in wm.
My screen was completely dead.The last thing i did,before my screen goes unresponsive was to push no/hangup button in android to open it
At first also i thought it was a g-sensor issue,but then realise that it was much more than it.
Until the moment i read this thread
The way it worked for me
I open the device with no button of course,made a soft reset from red hole and i wait until the device goes to standy itself.Then i open it from send button and voila touch is back !!!!
Strange thing but it works.Thank you very much you are a genius

sure the touch comes back when it wakes up using all other buttons except the power/end button so why is that all the sudden the power/end button causes the screen to go unresponsive
like for say when i hold the power/end key to open the pHONES OPTIONS in windows or android once the PHONES OPTIONS shows up and i try to click on power off or reboot on the screen the touch doesn't respond so the only way to reset or power off the device completely is the either use the reset button in the back or pull the battery out
i'm going to be sending it under warrenty/insurance to t-mobile and hopefully get a replacement cause i'm so use to the power/end button to wake up my device...

Guys be extremely carefull when using hard buttons in android.Finally my problem with screen is not the end button but the back arrow button.This button is necessary for using android and i have pushed it many many times the last months as i am using android.Νοw every time i pushed it my touchscreen stops responding.Τhe last time i pushed it my screen stopped responding(i thought for ever) and didnt knew the exactly reason that this happens.Because i didnt want to send the device to htc (firstly i must send it to expansys in france and they will send it to htc) and take it back at christmas i decided to go to a local mobile service.I wasnot mind for warranty cause i wouldnt be able to live 4 weeks without hd2.I was ready to give 600euros to buy desire hd
Result from service
At firstly he said to me that hd2 have no touchscreen problem and it works ok
I paid 20euros for opening the device and took it back.At first 5 minutes my screen stopped responding again and didnt knew the reason.For my good luck i leave the device untouched 10 minutes and the screen come back again.Then i used it and the time i pushed the back button the screen stopped working,fortunatelly for little seconds.Now i know.My screen stop responding when i push back button.So i change the keylayout to my android build and now i push send key instead of back and volume up key for menu and volume down for power on-off and hd2 works perfect after 24 hours without touching the back button
Also in monday i will go to service again to fix the button problem

Same issue with me
Exactly same issue with me. I have been using Winmo and Android on and off in my HD2. couple of weeks back, touch didnt respond after waking up the device from standby by pushing endkey.
tried everything - flash/stock rom/removed SD card/ hard reset/clear storage/custom rom/ battery pull out etc...
touch worked suddenly and only when i slightly touch the end key instead of pushing it fully, the start menu opened..this happened for few days and when ever i push the end key...screen goes unresponsive. all other hardware buttons are working fine and if at all i push end key the issue starts.
unfortunately my friend pushed the end key once and the screen never responded after this....now am using my old p3450 htc touch...
i think if we change the AP BOARD (Flex ribbon-keyboard chip) everything will go back to normal coz its not the problem with digitizer or the lcd of the software for sure.
trying to order one in ebay, we can change this ourselves...no need to send it to service centers and waste money on it.
if any of you have done this already...let me know if it worked for you.

guys dont know if it is allready known but there is a app called sidebar style swkey
http://forum.xda-developers.com/showthread.php?p=9726110#post9726110 which puts software buttons in the screen.This app is definitely button saver

[Q] Omnia 7 broken - will not boot

hi
my omina 7 of 1 month is broken.
A few weeks ago it wouldnt boot and gave the screen indicating
the phone needs to be plugged into the pc, it then booted ok.
Yesterday it gave the same message but by the time i got it home
the message was gone.
Now it will not boot, it simply cycles through the samsung logo, the three network logo , then back to the samsung logo.
Will be taking it back to the three shop tonight.
is there a way of hard resetting the phone using the buttons?
I have only found info on hard reset from within the OS, which obviously i now cannot get to.
has anyone else had this problem
The only similar problem i found was with a focus
was on the windowsphonesecrets website under the heading restoration error

to hard reset the focus press the power, volume & camera buttons all together. that might do it.

Have you tried taking the battery out of the phone? Heard from someone that that solved the problem...

yes tried taking the battery out
tried it without the sim
let the battery completely drain and tried again
the hard reset button combination didnt work either
just constantly cycling between the samsung and three network logos
three have now sent it off for repair ....

I have a very similar problem. My phone randomly rebooted itself but now it sticks on the Samsung Omnia 7 logo. I've tried removing the battery but nothing.
Is there a Safe Mode I can boot into?

Damn looks like I have the same problem.Was playing a game.Phone rebooted on its own, all I get is the Samsung Omnia 7 screen.
Tried a Hard Reset. I get the options pop up for about 2 seconds asking if I want to format.If I am quick enough to press the Home button nothing happens it just switches off.

Did you try to flash the ROM ?

Me?
No?
Download mode was the only mode that seemed to be recognised by my PC.If it wasn't in warranty I would maybe have tried that, but as it is in warranty I will let T-Mobile deal with it.

my repaired samsung was returned mid january
a few weeks later and the same thing has happened again...
phone froze, switched it off , now will not boot again
it is definitely the same hand set or at least the same outer casing
the bill said it had some parts replaced

I wonder what caused this issue?

I had similar problem and this is how I solved it:
Make sure your Device is switched off (remove and reinsert the battery)
1. Press and hold the Camera, Volume Down, and Power buttons simultaneously.
2. Release Power when the phone vibrates, but continue to hold down Camera and Volume Down.
3. Release Camera and Volume Down when the Format prompt is displayed on screen.
4. Press Windows key twice to confirm the hard reset.
Enjoy your phone now

add 1 to the list, mine is doing thin, formatting doesnt help, reflashing doesnt help.
unless i can find a fix, im without a phone for 15 days while tmob plays with it

any progress?
Since applying the update that Samsung release yesterday I'm having the same problem...
Format didn't work, installing 'older' firmwares (I8700BSEJK1, I8700XENJK1 and I8700DBTJK1) didn't solve any issue
Anybody with more ideas?

I've also had this issue... I think it was caused by forcing the nodo update. Now I've updated it normally using this guide
http://windowsteamblog.com/windows_...spx?utm_source=twitterfeed&utm_medium=twitter
I hope now the problem is solved.

Strange Touchscreen NAND Issues

ok, I have a strange issue that I can not seem to find the answer to. Whenever my phone locks after not being used etc. When I wake it up, the touchscreen will not let me unlock. It takes me close to 50 attempts to do so. However once I actually am successful in getting it unlocked. The touchscreen works flawlessly. I have tried several different builds, all of them I have the same issue. I have done Task29 and started fresh on that front each time. I tried a couple different radios. Any suggestions?

**** man i got the same problem! i tried hard reset, rom updates, other buils but it wont go away!
plz someone help us!

Hi,I'm using BOYPPC-SHIFTPDA GINGER 2.3.3 RAM_V5 works great so far the best that I tried.After u flash android it's recommended to wait few mins until it loads everything then do a shut down - not a restart.then again u wait few mins and u do a second shut down. after that the os should work fine ,at least for me works great. if that doesn't help ,try to reinstall everything from the start..hspl radio etc.

You could just turn off the lockscreen? Get 'NoLock' from the market. That should do the business if you want.

I've got the same problem since 5 days, It started when I started using WIFI and turning off my 3G ..

you have the same problem my hd2 has....it is a hardware issue. the screen becomes unresponsive. if you still have warranty send it in for a repair. if not... repair it yourself. it's not that hard. the screen wire is probably just loose.
follow this video to take apart your hd2.
http://www.youtube.com/watch?v=cL-jnUKufC4

Sounds like a similar problem that I'm experiencing. If I wake the lockscreen with the send key instead, it works. When I boot I get exactly one shot with the end key then it locks up again. I'm able to use it with the send key, but concerned it might get worse. If anyone finds the solution please post.

I actually for the first time had this, and I know this is going to get flamed but its not the Screen thats the problem. And I think (BIG IF) that the dreaded unresponsive screen issue that we keep reading about Majority of them I think is not the screen.
I have 2 HD2s and both have worked flawlessly without any problems, but today I was playing with my test phone that doesnt get used that much and I noticed after installing a new rom that my screen after I played with it for a bit went black (sleep) and when I woke it up it wouldnt respond, first thing that crossed my mind is I just lost my digitizier, and started wondering okay why, I went as far to re-flash WinMo stock HD2 rom, same issue, so I decided its time to find out exactly whats causing this, and I found it. I wasnt going to make a post again cause I figured people would be "Not another thread about this" but I know whats causing the screen issue, at least this is my suspicision and I have temporarily fixed mine.
The problem is HARDWARE, The Culprit: THE END KEY (Red Button)! The Answer to "How or Why": The "End" key is used to turn the phone on and off or to put it in sleep mode, it is the most used key out of all 5 keys, it is used probably 7x more then all the rest, Its used for just about everything, now how does this cause the unresponsive screen? Easy, the phone lock or sleep is associated with this key, Its the only way to make the screen go off other then waiting for the time out period. Because by habit we mostly hit the end key to turn the screen off the phone automatically associates this with locking the phone, once that happens the screen becomes unresponsive because of several reasons: 1) The contact under the actual key has dirt which causes the button to stick in the down position, 2) the contact is bent which the "end" key is pressing down on the contact which is making contact with the board and causing it to be unresponsive, 3) The contact is worn. This is the reason why if you press the end key a few times (anywhere between 2-10) and then try the screen responds, this is cause your "unsticking" the key which then lets the screen respond.
Most of us when we hit the end key press to the far right to avoid hitting the back key (The button with the left arrow) which causes the end button to lean toward the right. But you can wake the phone up with the other 4 keys to the lock screen which will allow you to unlock the phone. As a temporary fix for myself, on my test phone I now make sure to press on the left side of the key to prevent this from happening, since its a test phone I'm not worried, but the real solution is to take the phone apart and clean the underside of the end button, and the actual contact with alcohol to remove the build up of dirt and whatever else. And also if the contact frame is bent to GENTLY bend the right side back up alittle to stop it from happening, or sending it to htc and letting them fix it.
We have to RE-TRAIN ourselves to start using the other keys to wake the phone up and not rely on the end key so much.
Hope this helps anyone finally why we have this problem. And if it works for you then hit the Thanks button