Database Users

NEW! [MAGICIAN ONLY] VJLumos - Superbright screen! RTFM

[Update Nov 7: Universal too! Use VJLumosLite]
All,
If you follow this thread you’ll see discussion of the bizarre behaviour of the Magician’s screen when you start the camera; the screen momentarily goes whiter than white, nay, SuperBright. However, this level of brightness has been hidden from us in normal use.
I have developed a technique for using this SuperBright mode. I’m not too proud of it, because it’s an “ugly hack”, meaning a bit of a cheat. The ideal way to do this would be to reverse engineer the camera program, camera driver or screen driver and find out how it does this. I didn’t do this. I basically trick the system into thinking the camera is always running, hence always SuperBright.
Now, it basically works. However, and I cannot stress this enough, IT IS DANGEROUS.
Initially, I accept no responsibility for use of this program on your hardware.
Click to expand...
Click to collapse
I don’t know the effect of running your screen so bright for prolonged periods. However, it’s basically just enabling the camera, so if the camera works SuperBright safely, I guess this should too.
The SuperBright mode can ONLY be achieved once per soft reset. So that means, use it once, and then when you power off the Magician it will go back to normal brightness again. If you try to run your camera again, it WILL HARD RESET the Magician. Let me say that again. Hard Reset. Not soft. So take a backup before use, and use wisely, and say no to drugs. To reenable SuperBright you will have to soft reset again.
VJLumos cannot (hopefully) be shut down after it’s been run, to remind you that you’ve run it once so don’t be a fool and run the camera again. Or it will hard reset your phone. Did I mention this?
VJLumos will show you a warning on startup. This can be optionally overridden by starting the program with a command line “silent”, eg
Code:
“vjlumos.exe silent”
I reiterate. I did not want to release this program because it is an ugly hack, works only once per soft reset and can hard reset your Magician. But I’ve been asked to release it, so caveat emptor.
This program took quite a while to develop and release, so if you want to express thanks or monetary vengefulness, please feel free to send a donation to my “Buy Vijay a WM5 device so he can keep pumping out the goods” campaign.
I need to buy a WM5 device to finish developing a ton of good stuff I can’t share with you guys yet. However, my Magician’s only a few months old and my better half won’t let me spend more cash now, so if I save up, you guys will reap the rewards. My stuff will generally be free or nearly free, particularly for XDA forum users. Stay tuned for more goodies on show shortly.
Click here to make a donation. :wink:
Guys, if you use this, successfully or not, please post. I need to keep track of how it works.
Download VJLumos.exe
Update - Lite version
If the automatic version (above) doesn't work for you, please try the "lite" version. To use this one:
1. Place a shortcut to VJLumosLite in your startmenu (no installer included for now).
2. Start the camera.
3. Click the tools option (second icon in the bottom right corner).
4. Click the tools menu.
5. Choose Adjust...
6. Now go to your startmenu and run VJLumosLite.
7. Hopefully after a few seconds you'll return to the today screen in SuperBright mode.
8. If you get an error message, please PM me with details of your setup.
Download VJLumosLite.exe
Further update, camera.exe
It appears that there are different versions of the camera.exe program on our phones. I'm using ROM 1.12. If you have incompatibilies, you can download the camera.exe from my ROM here. Install it in your \windows\ folder. If there are any copyright issues I'll take it down.
V
PS Did I mention the hard reset? Don’t run the camera again after VJLumos. And backup BEFORE first use in case you forget.
PPS Oh, and if you find yourself in a strange screen with a cross on it, press hangup (the red key) or somehow go back to Today screen.
PPPS I don't recommend putting this in your startup folder. It needs to play around with the camera, and your startup may be slow, causing problems with interacting with it.

Congrats for achieving what you've done so far

Chatty, did it work with your amputated camera?
V

Well, no. It says "Couldn't start adjust dialog". That's a big hint towards how you did it ;-)
Now I'm gonna soft reset and pray I won't face an unwanted hard reset regardless what I'm doing.

I've left all debug messages in, and of course, as discussed in the other thread, that's exactly how I did it!
The camera program will obviously not start up when it doesn't find a camera then. I can't think of any other way to make it work for you.
Any chance you could have just changed the faceplate on your phone, rather than remove the camera? At work we've got some great adhesive silver foil, which I've used to cover the back of my magician (and ipod) with. It looks ok, and prevents scratching when throwing it down on the desk. It would cover the camera part well I think, and not look too poo.
Did it hardreset?
V

Luckily it didn't hard reset yet... but with Radio 1.13 I have the strange problem, that after a soft reset I get a msg like there's no driver for my BT hardware and I shall enter a name for the driver?! After a few power off/on it works again.
Changing the faceplate only would violate firm's policy I guess because you could always take away the plate, shoot photos and send them away immediately via MMS. I can faithfully admit I've got no "PDA with camera", I only got an allowed "PDA without camera". Another thing is, it's easily undoable. I needed this already for using my warranty.

Has anyone (else) tried this yet? I need to know if it works or needs deleting... please post either good or bad.
V

I can't test it because i don't know how to use the command line
If i start the file it shows me a warning message and after 3 seconds the screen return normal.

Andrea - when I said that if you don't know how to use a command line you shouldn't use it, I was just being careful. You don't need to use a command line.
Run the program. You'll get the warning. Then just click ok. What happens after that? On my system it goes through its actions for a couple of seconds, then returns to the Today screen with the new brighter screen.
V

On my magician it shows a warning message and after start camera and shows a message: "Couldn't find adjust dialog" then i press ok and there are 2 black windows open, i close them and the camera is on. I turn off camera and the screen returns to normal brightness

i'll hopefully release a simpler more compatible version tomorrow morning. Sorry you guys who are having troubles.
V

I'm waiting to test it! :lol:

Andrea, I've posted a lite version, please read the first post again and download.
All If the automatic version doesn't work for you, please PM me with your setup, eg startup programs, rom, or any special stuff you might be running. It runs perfectly on my 1.12 Magician, but I can't test it on any other. However, do try the new lite version, which requires you to manually go to the camera's Adjust... dialog, and then run VJLumosLite. It should return to the today screen in bright mode.
Oh, and I've updated the original version as well (updated version) to give it more time to find the windows it needs. Please try this version if it didn't work before, but you have had success with vjlumoslite which should work for everyone).
Please tell me if it works or not
V

Vijay, u've got a new pm!

@code72: He can see that for himself... why did you post here without any further information? This way it's useless for everyone.

Sorry Chatty i was excited.
I've sended him my configuration and the screen of error message.
(Vijay wrote: If the automatic version doesn't work for you, please PM me with your setup)
My screen capture is:

Guys, code72 got it working. It appears that we have different versions of the camera.exe program on our phones. Don't know how that happened. I'm using ROM 1.12.
If you have incompatibilies, you can download the camera.exe from my ROM here. Install it in your \windows\ folder. If there are any copyright issues I'll take it down.
Also, Code72 asked if I could update the program to prevent the Hard Reset. I'm afraid I can't, I wish I could. The hard reset happens because basically I'm forcing the camera to think it's on (even when it's off), to force the bright screen. However, then, if you try to start the camera again, it discovers that it thinks it's already on, conflicts with itself and crashes out badly. So, the only choice is not to run the camera twice... sorry guys. If I come up with a better solution, I'll post it.
V

Thanks Vijay, for me VjlumosLite works ok. The screen is very brightness wow!
I've put vijay's camera.exe file in Windows folder, i've put VjlumosLite on SD card, i've created a shortcut to VjlumosLite in start menu then:
start camera
press camera settings
press tools->adjiust
press start menu VjlumosLite and.....
Wow, u are in today screen with a very brightness screen!
has someone tried this?

Guys, I've just managed to get a Universal, and guess what? VJLumosLite works!?
V

MS Voice Command when unit is closed?

Hi all, I am new to this forum.
I own a Dopod 900, and currently trying to get MS Voice Command to work properly with my unit. I believe one of the problem with this application is that it does not respond to command while the unit is in closed mode (the pda screen in inside). Is solution to this problem already available?
I have searched the forum but have not been able to find any solution. I apologize if I missed it, please kindly point me to that posting if there is any.
Any advise is greatly appreciated.
- Josh :?:

From what I've read so far there isn't a fix I'm afraid. It's not fully compatible with WM2005 and will just have to wait for an update from Microsoft :-(

Thanks for your reply. That's too bad. I really have high hope that there is a solution for just this one problem, as there are already tweaks for the other problems. Being unable to receive command in closed mode really make MS Voice Command very much less usable. Too bad.
- Josh

I agree, but at least it's a step up with the other voice dial (that comes it with?). Couldn't do dialling from BT headset at all on WM2003 :-(

The "closed mode" doesn't bother me as I carry the Exec round in a Krusell case, with screen up. This allows me to instantly answer the phone when it rings (having seen who's calling first on the screen).
But there are a few more annoying problems with MS Voice Command 1.5 (I have UK version) present under Windows Mobile 5.0.
This one is unique to WM5.0:
- The first is when I try to call up a certain contact by "Show John Smith", it would show John Smith's contact under WM2003/03SE, but under WM5.0 it just shows blank screen on the Summary tab. This is still a proper contact, if you go to Notes tab, you see proper notes for this contact. You can press Edit and it will be edited... BUT, meanwhile if you just open Contact app, the ones you open are working great.
GBugger...
The following coupla' niggles are also present under WM2003/03SE.
- The days of week when answering "What date is it today" (somehow UK regional settings don't even have it, so I had to enable it in registry under NLS settings) -- all are announced correctly except Wednesday & Thursday, which are sounding simply as "Wed" and "Thu" instead of proper name.
- The signal strength for 1,2,3 and 4 "units" is announced as 30, 60, 90 and 100% correspondingly, instead of 25,50,75,100 which would seem more logical here. I don't know though if it's just caused by something real or an attempt to easily convert
That said, the application is enormously useful especially with the Krusell case, because the carrying shape for Exec in this case is PDA shape with screen up; but it's protected by screen cover of the case and you can't really write on the screen without opening the case -- so voice activation of programs and then controlling them by 5-way navigation control, is really a great way of using the Exec Examples of these programs are the eWallet (ever forgotten your PIN numbers or clothes size?) and speaking date/time, very convenient when you can't look down there.
Hopefully Microsoft corrects these small errors - the WM5.0 devices are the future.

EastExpert said:
Hopefully Microsoft corrects these small errors - the WM5.0 devices are the future.
Click to expand...
Click to collapse
Really, MS should have had this wrapped up ages ago. So disappointed. I want a device like the Exec, but with Voice Command fully working and A2DP sorted, and it's a shame I still can't get all this.
I was so used to the VC software on my JAM, shame the Exec is giving problems.
And I'm tired of tangling my headphones up...
MS, sort all this out already.

EastExpert said:
The first is when I try to call up a certain contact by "Show John Smith", it would show John Smith's contact under WM2003/03SE, but under WM5.0 it just shows blank screen on the Summary tab. This is still a proper contact, if you go to Notes tab, you see proper notes for this contact. You can press Edit and it will be edited... BUT, meanwhile if you just open Contact app, the ones you open are working great.
Click to expand...
Click to collapse
Copy the outres.96.dll into the windows folder and the contact will display correctly.

I'm sorry, but no, it doesn't work for me. Same effect as without outres.96.dll. And yes, I made a soft reset after copying it to the windows dir.
So the next question now is: how to remove the file again?
If I try to delete it, Resco Explorer says "Cannot delete file 'outres.96.dll'. The process cannot access the file because another process has locked a portion of the file."
If the file is useless, then I want to remove it from the device. But it has been blocked by another process.
Thanx in advance
tomestos

I had the same problem but saw the answer on a forum somewhere. After you have installed the dll and do a soft reset as it reboots for a short period it does a security check on the new dll and asks whether you really want to install it, if you answer yes then you will find the blank contacts screen problem is fixed. If you take your eyes off the screen at the end of the soft reset you will miss this security question a it defaults to No after a few seconds. Hope this helps.

I had the same problem but saw the answer on a forum somewhere. After you have installed the dll and do a soft reset as it reboots for a short period it does a security check on the new dll and asks whether you really want to install it, if you answer yes then you will find the blank contacts screen problem is fixed. If you take your eyes off the screen at the end of the soft reset you will miss this security question a it defaults to No after a few seconds. Hope this helps.

guc925 said:
I had the same problem but saw the answer on a forum somewhere. After you have installed the dll and do a soft reset as it reboots for a short period it does a security check on the new dll and asks whether you really want to install it, if you answer yes then you will find the blank contacts screen problem is fixed. If you take your eyes off the screen at the end of the soft reset you will miss this security question a it defaults to No after a few seconds. Hope this helps.
Click to expand...
Click to collapse
I have answered 'yes' to the security check. Nevertheless the dll doesn't work for me. So I want to remove it now, but I can't because it's blocked by some process.
Thanx in advance
tomestos

I've copied the file gnassel suggested into my Windows directory (using the explorer on my desktop pc).... rebooted the exec.. and voila.. it's working like a charm now.. My voice command shows the contact when I say : "Lookup XXXX" or when i call someone, it confirms the person and shows his information just fine. Norte I am usin the u.s. version of voice command 1.5.
Thanks gnassel !

This is a reply to my own posting above.
I did the soft reset using an application called 'psShutXP' (maybe someone knows it; one use it in order to switch off or soft reset the device). Voice Command's contacts mask doesn't worked.
A few minutes ago I soft resetted the device using the "original" reset hole. And voila: Voice Command works as expected!
So there seems to be a difference between "soft reset" using psShutXP and soft reset using the reset hole.
Sorry for the confusion. THE FILE OUTRES.96.DLL WORKS!
By the way: What exactly does outres.96.dll?
Best regards
tomestos

Many thanks gnassel, it works great..

The file was from OzVGA

Thanks for drawing attention to it and posting it, or I wouldnt have know..
Take a thanking damnit

Guys, where do I put the outres.96 dll file again? If I am using File Explorer there is a "WINDOWS" Folder from the very root with a lot of files. Is that the folder I am suposed to put the oures.96 dll file or just leave it outside in the main root?

cktlcmd said:
Is that the folder I am suposed to put the oures.96 dll file?
Click to expand...
Click to collapse
yes
c:\windows\
;-)

gnassel said:
cktlcmd said:
Is that the folder I am suposed to put the oures.96 dll file?
Click to expand...
Click to collapse
yes
c:\windows\
;-)
Click to expand...
Click to collapse
It's "\windows" not "C:\windows".
Best regards
tomestos

Thanks everyone. I thought for a while I have to plug it in my computer too.

Using PPC without touchpad ?

Hi. I crashed my wizard´s display. LCD works, but touchpad is broken. I want to reboot the device and controll it via remote-sw from pc. Does anyone know, how to skip the lcd-configure-process after hard-reset. This is the point where I can´t continue because of the non-working touchpad... Thanks for your help ! Buy the way: Did anyone changed touchpad succesfull ? Has to be brazed !?

hackl77 said:
Hi. I crashed my wizard´s display. LCD works, but touchpad is broken. I want to reboot the device and controll it via remote-sw from pc. Does anyone know, how to skip the lcd-configure-process after hard-reset. This is the point where I can´t continue because of the non-working touchpad... Thanks for your help ! Buy the way: Did anyone changed touchpad succesfull ? Has to be brazed !?
Click to expand...
Click to collapse
Try mymobiler http://www.mymobiler.com/ I am not sure if it will install before while asking to set up the touch pad but it is worth a try. I figured this maybe good because it does not ask to be installed on the device.

Thank you dwertz for your help. I tried, but "mymobiler" can only by installed after finishing the setup process on ppc. mhhh....

hackl77 said:
Thank you dwertz for your help. I tried, but "mymobiler" can only by installed after finishing the setup process on ppc. mhhh....
Click to expand...
Click to collapse
Try this.
http://www.codefactory.es/downloads/mobile_speak_pocket/Remote_ScreenAlignment_Manual.doc

connect the device using active sync then use windws explorer and explorer the device ,go into the windows folder on your device and delete the welcome.ink file, then soft reset and it wont bug you again till you hard reset.
you should also check this link out as you can use software to align the screen remotely
http://forum.xda-developers.com/showthread.php?t=347539&highlight=bypassing+screen+alignment

i had the same problem with my wizard. i got around pretty much everything, the only thing i can think of that i never figured out how to work with the keyboard is the alarm clocks. other than that with the arrow keys and tab button you should be set.
as far as getting it fixed, i found a replacement touch matrix and replaced it myself. i do not reccommend this as it caused a TON of headaches and still doesn't work right to this day. if i were you try getting a lcd/touch screen combo on ebay, its not too bad to open it and replace it.

Is there ANY way to bypass the Align Screen??

I have just done a hard reset and my touch screen does not work...am stuck on the Alin screen. Is there ANY way to bypass the align screen without tapping the screen?
I have been advised to delete the 'welcome' file on startup, but I cant seem to acsess the 'windows' file exploring thru activesync.
ANY HELP please!!

if you dont align the screen it will not be preasure sensitiv anymore
making the device somewhat crippled

Rudegar said:
if you dont align the screen it will not be preasure sensitiv anymore
making the device somewhat crippled
Click to expand...
Click to collapse
well since his touch screen doesnt work, how much more crippled can it get if he bypasses the align screen?
but i think you can just use your stylus and push the reset hole. I remember i had a big giant crack on my old MDA phone, so my touch screen was pretty messgaed up. And i was still able to flash it and hard reset it.
I think I either just popped the battery out or I did the pin hole reset.

If you cant pass the Align screen than most likely you are missing the drivers for the touchscreen interface,
If u're flashing ur own rom make sure there is a driver for the touchscreen included

quite simple:
create a file named "welcome.not" (just a empty file!) - copy it to the SD-card - reboot ...
does work on almost every device.
if it doesn't work on herald - try: http://www.codefactory.es/en/products.asp?id=244
(download: http://www.codefactory.es/descargas/family_1/product_3/MSP_RemoteAlignment.zip)

Thank You Baal, I have tried what u said and its worked wonders.....Thank u again

wow
thanks baal...that welcome.not worked like a charm!

It's been over 2 years since this was posted. I've just come across the same problem with my Kaiser and the welcome.not trick still works! Excellent. I love this place.

Well, alternatively you could connect the wing to your computer, using activesync, then browse it using windows explorer, and delete the welcome file from the start up folder

Clipped Wings
Thanks guys... That welcome.not trick worked great!

Yup! "Welcome.not" worked here as well! Had a friend's Herald (T-Mobile "Wing") with a screwed-up touch screen that just wanted to use it as a phone until he can replace the screen, and I needed to do the T-Mobile ROM update on it to get it to make calls properly again. The ROM update triggered the Welcome thing, which started with none other than "Tap screen to set up your Windows Mobile device"! Well I can't tap the screen with a broken digitizer!
I tried removing "welcome.lnk" from \Windows\Startup, but that left the PPC in a horribly malfunctioning half-state, where the Start menu wouldn't appear, and only the Phone functionality worked. Restoring "welcome.lnk" and adding "welcome.not" to the MicroSD card worked perfectly. It brought up the "Welcome" screen but did not say "Tap screen..." - that text was just omitted from the screen, and about 10 seconds later, it took me to the Today screen! Woohoo!
I also found it hard to believe how incredibly usable a PPC is without using the touchscreen...! I installed a game, set up the phone, and played the game, all with the buttons.

I just replaced a screen in a Trinity (Dopod D810). The touchscreen initially wasn't calibrated correctly so I ran the alignment tool in the settings, and after a few attempts, I calibrated it properly and the touchscreen was working perfectly. Now the touchscreen is not working properly. The top half of the screen responds to touch, but no matter where I press in that region, the screen thinks I'm pressing the top-right corner. When I run the alignment again, it responds to all the touchpoints but it never successfully calibrates and it keeps bringing me back to the alignment screen.
The current settings in the registry entry for touch calibration are as follows:
484,558 244,286 263,815 750,820 707,295
I've found a few other threads here (the most helpful being http://forum.xda-developers.com/showthread.php?t=355010) and I've tried the settings from that thread. The screen seems more responsive, but still not correct because the bottom half hardly responds and the top half seems to respond when it feels like it.
Can someone please post their D810 touchscreen settings so I can try it? I've tried the settings from my Touch Cruise, but the screen is still doing weird things.
This is a customer's phone so I need to have this fixed ASAP.
I'm thinking that it may be a faulty digitizer, but that won't explain why it worked perfectly when I first calibrated it.

*Edit: Finally got it to work! I just made a bunch of files named welcome.not & I guess one of them worked. Thanks for this valuable information!*

how did you create welcome.not

lhei said:
how did you create welcome.not
Click to expand...
Click to collapse
YEAH MATE >>>how did you create welcome.not<<< I know it`s looks realy silly as everyone seem to be know how 2 but hmmm yup I don`t know how to so pleased tell us how to do so ,,,

I put the sd card on my comp, opened it up, right clicked the open box & created a new text document, new word document, etc (there is a list of what new files you wish to create). I created one of everything, put the card back in the phone & rebooted....presto! No alignment screen!

can anyone give the calibration data for their wing plzzz. its in registry. HKLM/hardware/device/touch. plzzz

How to reset WM on touchscreen-broken PDA

I've got an Hermes with a broken touchscreen. I hard reset it and now it is stuck on the screen saying "Tap the screen to set up your Windows Mobile based device." I tried pressing all the buttons and doing hard and soft resets, but nothing will get me past that screen.
Anyone have any ideas to get past that first screen? Is there some way that I could access it through my PC and modify some file that would make it think that I had set it up already? (I flashed it with wm6 if that makes any difference.)
Any help would be greatly appreciated.
Also I tried to delete welcome.* files, but it is impossible due to ROM protection.
Very simmiliar to my problem is this thread:
http://forum.xda-developers.com/showthread.php?t=370363

axissolutions said:
I've got an Hermes with a broken touchscreen. I hard reset it and now it is stuck on the screen saying "Tap the screen to set up your Windows Mobile based device." I tried pressing all the buttons and doing hard and soft resets, but nothing will get me past that screen.
Anyone have any ideas to get past that first screen? Is there some way that I could access it through my PC and modify some file that would make it think that I had set it up already? (I flashed it with wm6 if that makes any difference.)
Any help would be greatly appreciated.
Also I tried to delete welcome.* files, but it is impossible due to ROM protection.
Very simmiliar to my problem is this thread:
http://forum.xda-developers.com/showthread.php?t=370363
Click to expand...
Click to collapse
You need a Remote Screen Alignment program. See here:
http://forum.xda-developers.com/showpost.php?p=1694985&postcount=3
Mike

mikechannon said:
You need a Remote Screen Alignment program. See here:
http://forum.xda-developers.com/showpost.php?p=1694985&postcount=3
Mike
Click to expand...
Click to collapse
Thank you, but when I press Skip button the following message box appears :
"An error occured while trying to perform the operation"((((...
Are there alternatives?

axissolutions said:
Thank you, but when I press Skip button the following message box appears :
"An error occured while trying to perform the operation"((((...
Are there alternatives?
Click to expand...
Click to collapse
I wish you hadn't said that!! It's nearly three years since wrote that piece and 've forgotten more than I remember.
I ass ume when you say you tried soft resets, you mean doing a soft reset after a hard reset but before it gets to the screen alignment stage?? If not then try it (but I guess you have)
I notice the the website for remote alignment has been updated. It may be worth gong to the first link and getting the device specific application rather than the older one I gave in a link.
There were several threads on this in the past, it may be worth searching on remote alignment.
It wll probably take me as long to track the problem as you, I'll see if I get time later.
Mike

Thank you very much!

Not sure this will be much help, but some more ideas perhaps:
I have done some searching, but only found a couple of cases where folk were getting the same error as you. In those cases it appeared to be that they were using Vista (and therefore not Active Sync) or they were connected but without a complete Active Sync pairing. There is also the suggestion that connecting as "Guest" is not productive.
The summary of the routine things to try appears to be:
1
Enter data to the WM registry from PC. Find a key by this name or similar.
HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="1922,1957 3330,639 3317,3276 600,3230 609,677
(This data varies according to screen size and therefore devices differ, though it hardly matters if the screen is totally unresponsive.)
2
Use the codefactory remote alignment program – BUT
Use XP not vista
Pair up with Active Sync but not as “GUEST”
3
Navigate to the windows directory on the PPC and delete file called welcome.exe If it will not delete, try re-naming it.
4
Create a blank file on you pc called welcome.not and place it on the root of your storage card.
http://forum.xda-developers.com/showthread.php?t=355010
Mike

Create a blank file on you pc called welcome.not and place it on the root of your storage card.
!!!!!!!IT WORKS!!!!!!!!!!
Thanx a lot Mike. Thanx a lot xda-developers.com
Donate as soon as possible

axissolutions said:
Create a blank file on you pc called welcome.not and place it on the root of your storage card.
!!!!!!!IT WORKS!!!!!!!!!!
Thanx a lot Mike. Thanx a lot xda-developers.com
Donate as soon as possible
Click to expand...
Click to collapse
Sometimes we get that "warm glowing feeling all over"!
Mike

Well, I'd like to post some of my oservations concerning this problem...
Remote Screen Alignment really works. But! It works (as I suppose) only in situations, when Windows/Startup Folder is present (or some files in this folder). I'm not sure, but it may be.
If this folder is missing, try to put welcome.not simple text file in the root folder of your mobile storage.
In my case, this folder was absent so I had a frustrating exception handler (as I might guess).
Good luck, guys .