Database Users

Missing Bluetooth icon after using PIToday

Hi guys,
I've been playing with PIToday for a couple of days now but I noticed one thing: My bluetooth icon on the Today screen disappeard after using PIToday. The only way to get it back for me is unchecking PIToday and soft reset. This is a bummer!
I've been checking some sites for solutions but could only find the solution mentioned above and one solutions for a 3870. This was putting a shortcut to the bluetooth icon in the startup folder. In the case of a MDA II, there is no such shortcut possible. I checked the registry and Windows directory but the is no .exe file which will start the bluetooth icon. Only .dll. But I don't know where to point it to. :?:
Any other suggestions? Because I would like to buy PIToday but I still want to access my bluetooth from the Today screen.
Wouter

Even though I am a huge fan of Pocket Informant, i experienced a lot of issues with the PI today plug in and stopped using it. It may be incompatability with other software I also have installed but as well as the missing BT icon it also caused instability (lock ups) and the occassional auto soft reset.
In regard to the missing BT icon though PI today is not the only culprit. Users of Pocket Breeze from SBSH Mobile software have reported the same issue. Only way to restore it is unselect the today plug in and soft reset.
Ed

Hi Ednap,
Somebody suggested a sort of sulution for me: Using Zenphone. In Zenphone there is an option to turn bluetooth on and off in a profile. And it seems to work!
It is not the solutions but a least it is workable.
Wouter

hi,
some kind of solution
get the tool "No Plugins today" (h**p://www.ictinus.com/NoPluginsToday/)
install it (of coz)
insert into your registry a new string like this
HKEY_LOCAL_MASCHINE\init\LaunchXX where XX is the highest number of the Launch under INIT (I use "Launch90")
enter as the stringvalue the path to the tool e.g. "\Storage\NoToday\NoPluginsToday.exe" or whereever you have installed the tool
insert a link under \Windows\startup or \windows\autostart (depends of the language) and point it again to this tool. Rename the Link in such way, that it will run last (eg. "XXXNoToday")
ok, thats all, reset your device, and enjoy your Bluetooth icon
It is not a failure by any of the Today-Plugins, which make the icon vanish, it's just a timeout of the btdll, caused by Plugins, which need too much time to initialize itself, so the icon just nor appear.
What does this thing?
after reset it removes the todayscreens, the bluetooth icon appears, and after that the notoday-tool switches the plugins on again.
you need some more time (3-4 secs) after the reset, but, who cares, you got the icon back
my2cents
Dejan

Nice work, IvkovicD!
I'll give it a try and I'll post this solution also at the PIToday forum. I'm sure this solutions is a great help for Deje the maker of the program.
B.t.w I tried SnoopSoft Dash Today Advanced today to see if I like it. It is not bad. A bit slow but guess what happens?
My headset profile is now gone! First I thought it was because I had too many Todayplugins but after removing a few and soft resetting it still wouldn't come back. Any suggestions for this one?
Thanks,
Wouter

To create a shortcut to Bluetooth copy the following into a shortcut file (text file with lnk extension i.e. Bluetooth.lnk):
34#\windows\ctlpnl.exe cplmain.cpl,23
and copy it across to your PPC
My headset profile is now gone!
Click to expand...
Click to collapse
Might it be that your profile is just gone from the Today screen? Check Settings>Personal Tab>Today>Items Tab and see if Profile is checked.

Hi Mark,
No. The headset profile was not there anymore in the list. I contacted Chris Scott, who makes DashToday and the only solution he had for now, was to uninstall the program.
Not realy a good option in my opinion.... Especialy because I just bought the program because there is no trial avaliable.
For your other solution:
I want to make sure that I realy understand. You want me to make a textfile and name it i.e Bluetooth.lnk. In this file there should be the line:
34#\windows\ctlpnl.exe cplmain.cpl,23
Then copy this file to my PPC and presumably to the startup directory?
Just want to make sure.
Thanks,
Wouter

Then copy this file to my PPC and presumably to the startup directory?
Click to expand...
Click to collapse
Copy it to the Start Menu folder. It won't bring back your bluetooth icon back but you will be able to access the settings from the start menu.

Thanks,
I give it a try later.
Wouter

wouterk said:
First I thought it was because I had too many Todayplugins but after removing a few and soft resetting it still wouldn't come back. Any suggestions for this one?
Thanks,
Wouter
Click to expand...
Click to collapse
Hi,
I know this effect. I've have this "vanishing", too, if I install too much today- plug ins. Just grab your favourite registryeditor and delete some build-in today-registry entries for today items, e.g. original-task, or some of the other build in ones. If you need it (I don't believe that , make a backup, but really, do you need them?)
reset your device, the missing plugs should appear again...
Sometimes, the OS just do not display some today-plugins, if there are too much entries into registry, even, if you do not activate them...maybe at MS nobody thought that someone needs more then 5 todayplugs at once...
just joking
l8er
Dejan

Hi Dejan,
Sounds like an interesting solution. Want to give it a try but I can't find the path to the right regkeys. :?: Do you know were those keys are to be found?
Wouter

Hi Dejan,
I found the reg keys. (HKLM\Software\Microsoft\Today) and deleted the Task, Calendar and Owner Info keys. Then I did a soft reset but my Bluetooth icon didn't reappear.
Too bad.
Did it work for you?
Wouter

Voice Command Contacts not shown.How to use outres.96.dll ??

Like many other people, I can't get MS Voice Command to display contact details (but the contact notes can be displayed). I understand that this works on other versions (e.g. The French version) but my problem is with the English version on a T-Mobile Pro.
I've seen suggestions that putting the outres.96.dll file in the \Windows folder allows the contacts to be displayed. However that doesn't work for me, even after a soft reset.
Has anybody got this to work without changing the Universal to a different screen resolution (e.g. using the VGA hack). If you did get it to work then how did you do it ?
Thanks
Peter

Copying the file into the \windows folder does work, when you reset, it should pop up a question about allowing it to run or not, or something along those lines.
I've done it several times, and each time it has worked straight off.

I believe it relates to the version of Voice Command, mine works successfully first time, everytime.

I just type a reply to this question on another thread, doh!
Simon, what version of MS Voice are you using then?
Steve

v 1.50.4333.1
on other posts I noticed those that couldn't get this to work were using the english version of 1.50.4333.21 or similar from memory
I think mine is the us version.
I tried to buy mine but they wouldn't let oz's so was able to acquire through alternate methods....

using MSVC UK V1.50.4333.21
works fine for me everytime.
noticed in another thread http://forum.xda-developers.com/viewtopic.php?t=36016 that a possible problem could be that the pin is blocking the popup to allow the dll to run, I don't set one until it is ready, as it is a pain, so that could be the reason why I've had no problem with it.

WIMP - Where Is My Phone

Hey Guys,
I posted this in the Kaiser thread. It works brilliantly on my Ameo too.
Here's the first post from:
http://forum.xda-developers.com/showthread.php?t=332324
--------------------------------------------------------------------------------
I’ve found a mint piece of software that no Kaiser owner should be without.
It comes with a trial period and u should check it out.
I was looking for some software that would help secure my phone and came across this. http://www.wimp-software.co.uk)
It’s supposedly designed to help you find your phone (yeh right, I aint gonna lose my £500 phone) but me and my mate have had a **** load of fun with it.
It’s pretty cool.
If you read the instructions, you can basically text the phone, but the other person doesn’t get the text message. The software grabs this coded text message and sends you back the gps position of the phone. It also gives you a link to google maps which is great if you’ve got Opera installed on your phone. (Don’t try PIE, it doesn’t work)
I gotta say, I’ve seen a lot of cool software around, but this one is SO cool. I only wish my girlfriend had a Kaiser. I could have so much fun with this.
The only thing I would add to the software though, is to know I was being WIMPED. Maybe a little SMS noise, or the icon changed or something, but I do suppose that it was written for phone theft. I haven’t tried it yet, but it also claims that if you change the SIM card in the phone it’ll SMS you with the number of the new SIM card.

this is a great find. thanks

Yes, this is a fantastic idea. However, the implication on our privacy is something to think about very seriously. Yes, it does protect our phone from theft and lost.
Can it be uninstalled or removed by a hard reset.?

Yes, it can be uninstalled, and yes it will be removed by a hard reset.
HOWEVER, pop it into your External Rom and the above two things become insignificant.

That's very true.

or cook it into a rom, doesnt help if they re-flash though...

Mobile Justice
http://sourceforge.net/projects/mjustice
Does the same, is freeware, works without problems on My athena WITHOUT bottom bar at 128 DPI (WINP shows no ICON)
The easiest way could be to cook it into a ROM and put the config file into an unlocked EXTERNAL ROM.
This is needed because a config file is requested, so, even if you cook mobile justice into the rom, you can't cook the config file (it needs your password, your SIM number and your phone number to report at..)
Then you can config your phone and even in case of an hard reset, without the thieft knowledge of the SW, it will restart and it reads the config file into the external ROM

Midget_1990 said:
or cook it into a rom, doesnt help if they re-flash though...
Click to expand...
Click to collapse
We would have to assume that 99.9% of the guy having our phones does not know anything about flashing. This is a reasonable assumption I think.
Having even 80% chances of getting back a lost phone is already not bad.

eaglesteve said:
We would have to assume that 99.9% of the guy having our phones does not know anything about flashing. This is a reasonable assumption I think.
Having even 80% chances of getting back a lost phone is already not bad.
Click to expand...
Click to collapse
Agree with this. Even having the config file on the MicroDrive might work, if this could be built into the ROM to look there by default. Don't know if that's possible. Yes, you could erase the Microdrive but this would take more research than the usual thief might be willing to make...
WIMP says it will send a Google Maps link, will Mobile Justice do that? Seems like MJ is actually more configurable.

wgary said:
Agree with this. Even having the config file on the MicroDrive might work, if this could be built into the ROM to look there by default. Don't know if that's possible. Yes, you could erase the Microdrive but this would take more research than the usual thief might be willing to make...
WIMP says it will send a Google Maps link, will Mobile Justice do that? Seems like MJ is actually more configurable.
Click to expand...
Click to collapse
MJ send GPS info in some formats, and have NO ICON on home screen. And a guy having in his hands a phone like this the first thing he search on google is HOW TO HARD RESET THE DEVICE Without a config file in ROM (on on microdrive I agree, but when you hard reset the ATHENA he asks "do you want to format the microdrive?" Having a stolen one the answer will be always YES!
Moreover is FREE, so I think no problems, asking to author, to put it into the ROM and to modify the registry key for config file to have it on external rom. The problem is.. could we have a PK3.0 with External Rom unocked as default?

sergiopi said:
MJ send GPS info in some formats, and have NO ICON on home screen. And a guy having in his hands a phone like the first thing he search on google is HOW TO HARD RESET THE DEVICE Without a config file in ROM (on on microdrive I agree, but when you hard reset the ATHENA he asks "do you want to format the microdrive?" Having a stolen one the answer will be always YES!
Moreover is FREE, so I think no problems, asking to author, to put it into the ROM and to modify the registry key for config file to have it on external rom. The problem is.. could we have a PK3.0 with External Rom unocked as default?
Click to expand...
Click to collapse
I don't recall being asked about reformatting the MicroDrive on hard reset... But having it in external rom would certainly be a viable approach. This would be a nice feature for PK3.0

Has anyone got MobileJustice working??
I can send a message but the GPS feature doesn't work. Anyone??

I tried mobileJustice and it didnt work for me either

wgary said:
I can send a message but the GPS feature doesn't work. Anyone??
Click to expand...
Click to collapse
So... I also tried WIMP and no love there, either. Even "heated up" GPS first. Thoughts, anyone?

wgary said:
So... I also tried WIMP and no love there, either. Even "heated up" GPS first. Thoughts, anyone?
Click to expand...
Click to collapse
WIMP worked for me second time out - had to increase the GPS timeout from 3 mins to 10 (I haven't yet tried any intermediate settings).

apd said:
WIMP worked for me second time out - had to increase the GPS timeout from 3 mins to 10 (I haven't yet tried any intermediate settings).
Click to expand...
Click to collapse
What settings did you use? I have x7500... Thanks!

wgary said:
What settings did you use? I have x7500... Thanks!
Click to expand...
Click to collapse
COM4, 38400, GPS TImeout 10, Max Satellites 6

The only way to works well it's integrating it in the rom, cause if its stolen the first thing that can do is change the rom

New Version on their website.
V1.2 includes various stealth options.

Wouldn't it be great if we could tell the program to draw the thiefs attention (eg an alarm) and when the person reacts to this alarm have it make a photograph with the front camera, which could be send through mms or e-mail... Then you would know who to look for when you arrive at the GPS coordinates with your baseball bat...

Is there any software which can do this?

Basically I am looking for some software which, on receipt of an SMS will initiate an outbound call to a number in the contact list on the phone.
something along the lines of :-
SMS received from 1-555-5555 containing the word CALLBACK and a password.
Phone then dials 1-555-4444 or any specific contact as defined in its config
it doesn't have to use the contact list but must be triggerable remotely.
Target device is a HTC Hermes. and possibly a StarTrk
The program doesn't need to be stealthy, it's to initiate the call with full permission from the owner but without intervention.
Partly it's for my grandfather, if I give him a Startrk then I want to be able to activate a call remotely if I get notified that he has triggered his medicalert system, so I can try to see if he is ok without him having to answer a call.
I googled, and found nothing, I'm hoping someone here can either write an app that can do what I need, or suggest a product that will enable me to do this.
Auto answer is too generic, I want it to be just for myself and not all callers, and the password is because there may be times I just want to send a generic SMS

Sounds like you are talking about an SMS Callback trigger, though I have never heard of a mobile based one.

I always seem to want the impossible or the unwritten maybe it's time one was written?

Crash Override said:
I always seem to want the impossible or the unwritten maybe it's time one was written?
Click to expand...
Click to collapse
just unwritten, it's not impossible
pretty easy actually
i'll try to throw some together this week if/when I have the time

try this
Just place it on the phone and edit the config.ini if needed default settings are:
trigger = CALLBACK
password = pass
I tested this on my TyTn2, and it seems to do what you wanted, the program will activate the speaker when calling (can be changed in the config.ini)
this way if your grandfather cannot reach the phone he still be able to talk..
But test it before use, I'm not sure how sensitive the mic of the phone is.
I do like the idea so I'll probably add some more functionality
- auto pickup on call from fixed number
- status
- call/sms log
Let me know what you think.
PS. this was created for a touch screen device not a smart phone...
also I can not be held responsible for damages, phone bills etc.
but that goes without saying ..right
-=edit=-
tested by sending an SMS to myself, the program then called my number, but when i tried with a friends phone it didn't work
let me know if it works for you (if you have 2 phones)
also make sure if the number you send it from is in your phonebook or not (could be the issue)
-=edit=-
that is the issue, working on it
Issue solved
now I need to figure out how to replace the attachment
I'll add it in a new post

I also believe SKSchema can do this in watch mode. Actually SKSchema can do lots of cool things in watch mode.

new version attached
-=edit=-
build a cab, also added apptodate support

is it just me or does it seem to autodial the number that sent the SMS?
one addition would be the facility to set the option that if number X sent the SMS then callback to number Y
example - if I am in the US I will have the number 1-555-1234 but my grandfather is in the UK - +44-555-5555
I run a voip line with a UK DID number such as +44-555-6666 so when the SMS is received from 1-555-1234 the return call goes to the +44-555-6666 instead of the US Cellphone (cost reasons lol, UK landline free, international call of any length = US national debt)

Here is a SMS Trigger I built, do not know if that satisfy you.
Check rk-SMSSwitch under my signature.

Crash Override said:
is it just me or does it seem to autodial the number that sent the SMS?
one addition would be the facility to set the option that if number X sent the SMS then callback to number Y
Click to expand...
Click to collapse
yes you are right, don't know how i could have overlooked that
I'll fix this in the next version
any other requests?
:-D
-=edit=-
Program updated, you should be able to run apptodate to get the new version
don't you love just that program

Mr_Gee said:
any other requests?
:-D
-=edit=-
Program updated, you should be able to run apptodate to get the new version
don't you love just that program
Click to expand...
Click to collapse
Will there be a Smartphone version of this app that I could run on my QTek 8500 (StrTrk) ?
Thanks

timwb said:
Will there be a Smartphone version of this app that I could run on my QTek 8500 (StrTrk) ?
Thanks
Click to expand...
Click to collapse
Sorry, i just noticed this reply
To be honest i wasn't planning on creating one, but i could give it a shot
the biggest problem is i don't have a Smartphone to test it on..

I'm sure you could probably find a few testers in the forums, there's quite a lot of people on here!
I'll obviously be willing to test anything you are able to come up with. I don't know where you are located mr gee but on ebay UK you can buy an old Orange spv c500 (HTC Typhoon)or c600 (HTC Tornado I think) really cheap now. There are also WM6 roms available for these devices on this site somewhere.

timwb said:
I'm sure you could probably find a few testers in the forums, there's quite a lot of people on here!
I'll obviously be willing to test anything you are able to come up with. I don't know where you are located mr gee but on ebay UK you can buy an old Orange spv c500 (HTC Typhoon)or c600 (HTC Tornado I think) really cheap now. There are also WM6 roms available for these devices on this site somewhere.
Click to expand...
Click to collapse
I already checked eBay, and there might be some good ones but I don't want to overpay
I'll keep it in mind
Attached is the same program but compiled for a smartphone, I'm not sure if it will work, I remembered I have an emulator for smartphone installed, but I received an error message when running the exe.., I think because the CF.NET wasn't installed..
let me know

I tried it on my QTek 8500. The exe ran but all I got was a window with a blue background and the words "SMS2Call v. 0.03" in black.
No buttons to press or anything, had to use Task Manager to exit it. Which id did without complaint. Thanks for trying, some work may be needed I think

timwb said:
I tried it on my QTek 8500. The exe ran but all I got was a window with a blue background and the words "SMS2Call v. 0.03" in black.
No buttons to press or anything, had to use Task Manager to exit it. Which id did without complaint. Thanks for trying, some work may be needed I think
Click to expand...
Click to collapse
Currently that is the program
Could you try to edit the ini file?
in case you have 2 phones, add the number from the 2nd phone in the file
save and run the program
send an sms from the 2nd phone with the passcode mentioned in the ini file
your 1st phone should call this number after the SMS receipt
I know the program doesn't look like much but i might fix this in the future
when i do i'll also look at the exit button.
the reason i didn't was because the application was for an older person,
this person could be playing around with the phone accidentally closing the program ...

I looked in the .ini file and then tried sending a text to the phone containing the words CALLBACK PASS. I tried this with/without a space, up and lower case, with the program in the background or on screen but it didn't do anything. Do I have to put a shortcut in the Startup folder or something? Or am I not formatting the text message properly? The sending phone number is in the contacts list if that makes a difference.
Any ideas?
Thanks

Could you just not set his phone to auto answer ? - that way you can call him any time.

timwb said:
I looked in the .ini file and then tried sending a text to the phone containing the words CALLBACK PASS. I tried this with/without a space, up and lower case, with the program in the background or on screen but it didn't do anything. Do I have to put a shortcut in the Startup folder or something? Or am I not formatting the text message properly? The sending phone number is in the contacts list if that makes a difference.
Any ideas?
Thanks
Click to expand...
Click to collapse
not really, assuming it works maybe it has to do with the formatting,
Callback should be in capitals and pass in lower letters.
when I tested this with my TYTN2 it worked the way it should.
also did you enter the default number ? e.g. the number that will be called?
PauloJ5 said:
Could you just not set his phone to auto answer ? - that way you can call him any time.
Click to expand...
Click to collapse
[sarcasm]
Gee why didn't I think of that...
[/sarcasm]
Seriously have you read the thread?
the topic starter didn't want it this way for several reasons...

Default number and closed flip
I didn't enter a default number because I want it to respond to any number that sends the text. I deleted the DefaultNumber line from the config and it worked, to a point. The phone I'm running it on is a Qtek 8500/HTC StrTrk, which for those who don't know, is a flip phone. My problem is this, if the phone is closed when the text is received the call is made but cut off immediately because the phone is set to hang up calls on closing. Nowhere can I find a setting to stop this from happening, anybody have any ideas?

How to reset WM on touchscreen-broken PDA

I've got an Hermes with a broken touchscreen. I hard reset it and now it is stuck on the screen saying "Tap the screen to set up your Windows Mobile based device." I tried pressing all the buttons and doing hard and soft resets, but nothing will get me past that screen.
Anyone have any ideas to get past that first screen? Is there some way that I could access it through my PC and modify some file that would make it think that I had set it up already? (I flashed it with wm6 if that makes any difference.)
Any help would be greatly appreciated.
Also I tried to delete welcome.* files, but it is impossible due to ROM protection.
Very simmiliar to my problem is this thread:
http://forum.xda-developers.com/showthread.php?t=370363

axissolutions said:
I've got an Hermes with a broken touchscreen. I hard reset it and now it is stuck on the screen saying "Tap the screen to set up your Windows Mobile based device." I tried pressing all the buttons and doing hard and soft resets, but nothing will get me past that screen.
Anyone have any ideas to get past that first screen? Is there some way that I could access it through my PC and modify some file that would make it think that I had set it up already? (I flashed it with wm6 if that makes any difference.)
Any help would be greatly appreciated.
Also I tried to delete welcome.* files, but it is impossible due to ROM protection.
Very simmiliar to my problem is this thread:
http://forum.xda-developers.com/showthread.php?t=370363
Click to expand...
Click to collapse
You need a Remote Screen Alignment program. See here:
http://forum.xda-developers.com/showpost.php?p=1694985&postcount=3
Mike

mikechannon said:
You need a Remote Screen Alignment program. See here:
http://forum.xda-developers.com/showpost.php?p=1694985&postcount=3
Mike
Click to expand...
Click to collapse
Thank you, but when I press Skip button the following message box appears :
"An error occured while trying to perform the operation"((((...
Are there alternatives?

axissolutions said:
Thank you, but when I press Skip button the following message box appears :
"An error occured while trying to perform the operation"((((...
Are there alternatives?
Click to expand...
Click to collapse
I wish you hadn't said that!! It's nearly three years since wrote that piece and 've forgotten more than I remember.
I ass ume when you say you tried soft resets, you mean doing a soft reset after a hard reset but before it gets to the screen alignment stage?? If not then try it (but I guess you have)
I notice the the website for remote alignment has been updated. It may be worth gong to the first link and getting the device specific application rather than the older one I gave in a link.
There were several threads on this in the past, it may be worth searching on remote alignment.
It wll probably take me as long to track the problem as you, I'll see if I get time later.
Mike

Thank you very much!

Not sure this will be much help, but some more ideas perhaps:
I have done some searching, but only found a couple of cases where folk were getting the same error as you. In those cases it appeared to be that they were using Vista (and therefore not Active Sync) or they were connected but without a complete Active Sync pairing. There is also the suggestion that connecting as "Guest" is not productive.
The summary of the routine things to try appears to be:
1
Enter data to the WM registry from PC. Find a key by this name or similar.
HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="1922,1957 3330,639 3317,3276 600,3230 609,677
(This data varies according to screen size and therefore devices differ, though it hardly matters if the screen is totally unresponsive.)
2
Use the codefactory remote alignment program – BUT
Use XP not vista
Pair up with Active Sync but not as “GUEST”
3
Navigate to the windows directory on the PPC and delete file called welcome.exe If it will not delete, try re-naming it.
4
Create a blank file on you pc called welcome.not and place it on the root of your storage card.
http://forum.xda-developers.com/showthread.php?t=355010
Mike

Create a blank file on you pc called welcome.not and place it on the root of your storage card.
!!!!!!!IT WORKS!!!!!!!!!!
Thanx a lot Mike. Thanx a lot xda-developers.com
Donate as soon as possible

axissolutions said:
Create a blank file on you pc called welcome.not and place it on the root of your storage card.
!!!!!!!IT WORKS!!!!!!!!!!
Thanx a lot Mike. Thanx a lot xda-developers.com
Donate as soon as possible
Click to expand...
Click to collapse
Sometimes we get that "warm glowing feeling all over"!
Mike

Well, I'd like to post some of my oservations concerning this problem...
Remote Screen Alignment really works. But! It works (as I suppose) only in situations, when Windows/Startup Folder is present (or some files in this folder). I'm not sure, but it may be.
If this folder is missing, try to put welcome.not simple text file in the root folder of your mobile storage.
In my case, this folder was absent so I had a frustrating exception handler (as I might guess).
Good luck, guys .