Hi,
I just installed application,
however after i reset the PDA, it's not starting the windows. just the main blue screen (O2 default backscreen) and no activity at all.
I tried to charge the battery, but the light is off (usually it shows red/green light).
I tried to install Xda_Exec_Upgrade_v1.30.162.exe (latest ROM from O2),
but unfortunately it failed as well, as the application couldn't detect my xda exec .
try to press power + light + reset button and restart the application. and get the same result.
anyone can help?
TIA
Tokek
and also.. have tried hard reset with no luck ..
after reading same posting.
solved it by :
1.) Make the update without any card (SD + SIM) in the phone!
2.) Use the original USB-cable
3 ) press power +light +reset button
4) re run the update
5) done
Good news .... Congrats
Related
Guy,
Please Help
I was upgrading my XDAIIi to Xda IIi ROM v 1.11.162. during which it show an error message and it just went blank looking closely at the screen showing USB at the top of the screen and the bottom of it has v1.01,
when put on the cradle it showing USB.
I have press the reset botton God knows how many times
Please help someone
Were you trying to upgrade to the rom I posted? With RADIO 1.03 in the filename?
You need to press the power, d-button down and the reset button all together.
Then run the update program again. If it is the original O2 rom then it should work fine from there. If it is the rom I posted then the update will fail initially, just run the program a second time without touching your phone at all.
Hope this helps.
No, I am upgrading from O2 website. I am sorry it not connecting to my pc at all. No sign of life ,
it only display USB on the screen
Try doing a hard reset by holding the power button down and pressing the reset button.
Put it into bootloader by pressing the power, d-button down and the reset button all together and releasing them at the same time. The screen should say SERIAL. Connect it to your PC and the screen should then say USB. Then you should be able to run the update.
If this doesn't work as a last resort try taking the battery out for a while to let the backup run down and start again. Whatever happens the phone needs to go into bootloader mode and a rom applied to get it working again.
Please, which is the D-botton you are refering to
The D button is the "Directional" button, in between the green pickup phone button and the red hang up button.
if your atom can't turn on (not respond when pressing power button and just orange LED blip) because 0% battery, ext
do this step
1. press and hold (camera button) + (rec button) then (power button) in same time
2. it show MNX Diagnosis Manager
(D) Pure Diagnostic Mode
(B) Blutooth Test Mode
(G) GSM Test Mode
(U) Disable DM
3. Select (G) by pressing rigt/left key, then press enter (center d-pad)
4. it show : InitializingThe GSM Module,
wait a few second
5. If it show:
********************
****Initialize GSM OK****
********************
press reset button in bottom
you can test your device without Self Diagnosis with Pure Diagnosis Mode (D)
my battery crashed, so i always do this step to turn on with charger cable
i get this once but i cant press enter
enter=center d-pad
ya taht i know but nothing happen..now it show mn1 boot loader what to do
beng46 said:
ya taht i know but nothing happen..now it show mn1 boot loader what to do
Click to expand...
Click to collapse
don't insert miniSD card...
I tried
"press and hold (camera button) + (rec button) then (power button) in same time"
but nothing happens. I still cannot get the screen to turn on.
Can anybody please give me some extra information about what could be done to turn on my device ?
Thanks
this was VERY HELPFUL!! my 02 atom pure's battery wont open 2 weeks ago, then my back-up battery experienced the same thing today. i did the steps below and it activated my 02 phone
but i dont know why this problem occurred.... can anyone explain why it happen?
all of a sudden, my 02 phone wont open anymore after i charged it.
adhisip said:
if your atom can't turn on (not respond when pressing power button and just orange LED blip) because 0% battery, ext
do this step
1. press and hold (camera button) + (rec button) then (power button) in same time
2. it show MNX Diagnosis Manager
(D) Pure Diagnostic Mode
(B) Blutooth Test Mode
(G) GSM Test Mode
(U) Disable DM
3. Select (G) by pressing rigt/left key, then press enter (center d-pad)
4. it show : InitializingThe GSM Module,
wait a few second
5. If it show:
********************
****Initialize GSM OK****
********************
press reset button in bottom
you can test your device without Self Diagnosis with Pure Diagnosis Mode (D)
my battery crashed, so i always do this step to turn on with charger cable
Click to expand...
Click to collapse
Is that really working? Nothing happend on mine ...
If u'r atom cant turn on :
Press and hold camera button, realese battery then plug again. (camera stiil pressed)... wait untill something show on the screen....
perhaps it will help, as my experience....
My atom did not run in to bootloader mode
I have upgrade the atom with the atom rom WM6.5 21500. The rom was successfully upgraded but i don't like it. And when i tried to downgrade it to WM6.1, it didn't work. I have tried to enter bootloader but i can't, when the atom restart, they will not boot and restarting again and again. .
Please help in this matter..
thanks.
just black screen
after loading wm 6.5 only the screen appear black just black nothing else what to do any suggestion
Dear All
Sorry for bothering you all, I have search the net for a solution with no luck. Finally, I decide to post my problem here.
While I a upgrading my Athena 7500 from cooked rom to P4 rom, by mistake I removed the USB cable. I reconnect it but the PC said usb can’t be detected. I hard rest my phone. It showed the firs colored screen then went to white screen with the following messages
((Prewss ACTION to restore factory default
Press Camera key to xist))
When I press CameraKey its turn of
Then if I hard resut again and then I
pressed the ACTION. It shows “please white” for seconds. Then showed the following
((Restore default completed
Press Power key to boot
Press CommManager key to formate micro drive
))
If I go for any those option I will end with phone off(no light no screen)
When I connect my phone by USB with any PC is not detected it at all even as unknown device. When I put it in the charger no light indicated that it is charging.
I extract the NBH file from the orginal rom and but it in SD card (fat32 formated) and rename it as ATHEIMG.nbh . hard rest but the same result
How I could return back my Athena?
Thanks in advance
same thing but...
...happened to me, but I didnt flash any rom or radio or even changed bootloader...It was wrking fine one day, and next day it wont boot-up, screen not lit at all. It enters bootloader and I can hard-reset it, but no use...screen not lit and as far as I can see..it doesnt boot...when I connect it to the comp in bootloader it says USB...computer doesnt recognize it otherwise...when I turn on the device, only joystick lights green...as same as when its charging - then its red...
After that tried flashing from the card, connecting it to the MTTY, no use...
no reaction from any of the buttons, keyboard...it turns it self when I remove battery...any ideas?
Are you try Reboot from SD_Card... ???
how to reboot from SD Card? anyone can help me on this I have same problem...
thanks in Advance!
Hey Guys, my windows mobile is getting stuck on the windows mobile screen all the time.
I tried finding hard reset for it (its a chinese elf clone with windows mobile, worked fine for days nd days...)
When i do the following combination
Volume UP + Camera Button + Stylus reset button
It gives me an option
Enter BootLoader Master Clear. (With Blue Back Ground) It automatically exits that screen and then again gets stuck at the windows mobile screen. I've tried pressing enter button, left right but it doesnt proceed to the next level of formatting
2nd combination
Volume Up+ Reset Stylus butto
it gives enter bootloader updated from sd card, sometimes it goes to the windows mobile screen it self. Sometimes it gets stuckl on the enter bootloader screen, i've tried pressing all the buttons and ****
When i connect it to my pc i cant access anything as the phone cant go any further from windows mobile screen.
I dont know the boot loader and **** as i am new. Is there any way i could do something via my sd card? i can copy files in it through my bros mobile.
Any help would be greatly appreciated
i have clone of HTC Touch. Green button+redbutton with reset stylus doesnt do anything and goes to the windows mobile screen as usual....
Please Help me
TH3KiD said:
Hey Guys, my windows mobile is getting stuck on the windows mobile screen all the time.
I tried finding hard reset for it (its a chinese elf clone with windows mobile, worked fine for days nd days...)
When i do the following combination
Volume UP + Camera Button + Stylus reset button
It gives me an option
Enter BootLoader Master Clear. (With Blue Back Ground) It automatically exits that screen and then again gets stuck at the windows mobile screen. I've tried pressing enter button, left right but it doesnt proceed to the next level of formatting
2nd combination
Volume Up+ Reset Stylus butto
it gives enter bootloader updated from sd card, sometimes it goes to the windows mobile screen it self. Sometimes it gets stuckl on the enter bootloader screen, i've tried pressing all the buttons and ****
When i connect it to my pc i cant access anything as the phone cant go any further from windows mobile screen.
I dont know the boot loader and **** as i am new. Is there any way i could do something via my sd card? i can copy files in it through my bros mobile.
Any help would be greatly appreciated
i have clone of HTC Touch. Green button+redbutton with reset stylus doesnt do anything and goes to the windows mobile screen as usual....
Please Help me
Click to expand...
Click to collapse
What do you mean by a clone??
If it is not a phone manufactured by HTC
All the procedures for Hard Reset or ROM flashing will be
totally different...
XDA forums doesn't catalog them ...
Hi, I have an HTC Diamond 2. It stays at the logo screen (black screen with HTC letters in white). It doesn't pass anywhere from there. I've tried using the reset button on the back near stylus, tried the hard reset (Vol Up/Down + Power key) but it doesn't respond. There's an option that "works": If I press the 'call' key + power button, it shows an update menu with the following: 1. Update Logo 2. Update OS 3. Update Eboot 4. Format User Space 5. Return; none work except for the format user space option, but it does nothing.
I've tried also from the PC but it doesn't recognize the device via USB. I downloaded Active Sync, and an update wizard from HTC.com but still no success in recognizing the device.
Please help me, I need this phone to keep working, I don't know what triggered the problem..
Install a new nhb rom and try again.