Hey Guys, my windows mobile is getting stuck on the windows mobile screen all the time.
I tried finding hard reset for it (its a chinese elf clone with windows mobile, worked fine for days nd days...)
When i do the following combination
Volume UP + Camera Button + Stylus reset button
It gives me an option
Enter BootLoader Master Clear. (With Blue Back Ground) It automatically exits that screen and then again gets stuck at the windows mobile screen. I've tried pressing enter button, left right but it doesnt proceed to the next level of formatting
2nd combination
Volume Up+ Reset Stylus butto
it gives enter bootloader updated from sd card, sometimes it goes to the windows mobile screen it self. Sometimes it gets stuckl on the enter bootloader screen, i've tried pressing all the buttons and ****
When i connect it to my pc i cant access anything as the phone cant go any further from windows mobile screen.
I dont know the boot loader and **** as i am new. Is there any way i could do something via my sd card? i can copy files in it through my bros mobile.
Any help would be greatly appreciated
i have clone of HTC Touch. Green button+redbutton with reset stylus doesnt do anything and goes to the windows mobile screen as usual....
Please Help me
TH3KiD said:
Hey Guys, my windows mobile is getting stuck on the windows mobile screen all the time.
I tried finding hard reset for it (its a chinese elf clone with windows mobile, worked fine for days nd days...)
When i do the following combination
Volume UP + Camera Button + Stylus reset button
It gives me an option
Enter BootLoader Master Clear. (With Blue Back Ground) It automatically exits that screen and then again gets stuck at the windows mobile screen. I've tried pressing enter button, left right but it doesnt proceed to the next level of formatting
2nd combination
Volume Up+ Reset Stylus butto
it gives enter bootloader updated from sd card, sometimes it goes to the windows mobile screen it self. Sometimes it gets stuckl on the enter bootloader screen, i've tried pressing all the buttons and ****
When i connect it to my pc i cant access anything as the phone cant go any further from windows mobile screen.
I dont know the boot loader and **** as i am new. Is there any way i could do something via my sd card? i can copy files in it through my bros mobile.
Any help would be greatly appreciated
i have clone of HTC Touch. Green button+redbutton with reset stylus doesnt do anything and goes to the windows mobile screen as usual....
Please Help me
Click to expand...
Click to collapse
What do you mean by a clone??
If it is not a phone manufactured by HTC
All the procedures for Hard Reset or ROM flashing will be
totally different...
XDA forums doesn't catalog them ...
Related
Well I installed card export, and got some errors, after like the 2nd error my 9100 resetted itself and is stuck in the boot screen with cloads now.
A hard reset is no go, just behaves as a normal reset, and I'm pretty sure I red about this problem in another thread somewhere here, just can't seem to find it.
Anyone got an idea?
The only thing it shows now is:
IPL 1.01
SPL 1.01
GSM 1.13.10.0
OS 1.6.7.1
I am also stuck on the boot screen after my ROM update froze! Is this device now dead?!?! Please tell me there is a way to fix it!
Press and hold camera button and press resett button while you holding camera button.
now you enter bootloader (tree color screen) connect device to pc and run update you had on your device before it crached
Got it!!!
Hold down the Voice Button plus the Camera button at the same time and hit the reset button. That takes you into bootload mode. Then you will have a USB connection to the PC - not via active sync. Run one of the RUU update programs and you will be back....
At least it worked for me!
as it did for me
kjk said:
Press and hold camera button and press resett button while you holding camera button.
now you enter bootloader (tree color screen) connect device to pc and run update you had on your device before it crached
Click to expand...
Click to collapse
My soft reset button is not working. I can only reset by taking battery out of mda. What to do now? Help!
Hi my tmobile wing that i bought off the craigslist is stuck on the main screen with tmobile and is not going beyond it
can some one please help me how can i make this phone work again
Try a hard reset
(hold down both soft keys and poke the stylus through the hole on the side of the phone under the volume slider)
If that doesn't work, you need to install this :
T-MOBILE STOCK RUU
In order to run this, you'll need to plug your phone to your PC via USB, then go into bootloader mode ... which means you need to hold down the camera button (and keep it down) while you soft reset (poke stylus through hole under volume slider)
When your phone is in bootloader mode, and plugged into USB, it should show "USB" in the corner... once that happens, run that file which will take the phone back to factory settings.
duprade said:
Try a hard reset
(hold down both soft keys and poke the stylus through the hole on the side of the phone under the volume slider)
If that doesn't work, you need to install this :
T-MOBILE STOCK RUU
In order to run this, you'll need to plug your phone to your PC via USB, then go into bootloader mode ... which means you need to hold down the camera button (and keep it down) while you soft reset (poke stylus through hole under volume slider)
When your phone is in bootloader mode, and plugged into USB, it should show "USB" in the corner... once that happens, run that file which will take the phone back to factory settings.
Click to expand...
Click to collapse
Thanks a million for the help now my wing is working again !!!!
duprade said:
Try a hard reset
(hold down both soft keys and poke the stylus through the hole on the side of the phone under the volume slider)
If that doesn't work, you need to install this :
T-MOBILE STOCK RUU
In order to run this, you'll need to plug your phone to your PC via USB, then go into bootloader mode ... which means you need to hold down the camera button (and keep it down) while you soft reset (poke stylus through hole under volume slider)
When your phone is in bootloader mode, and plugged into USB, it should show "USB" in the corner... once that happens, run that file which will take the phone back to factory settings.
Click to expand...
Click to collapse
Ahhh... it's not working, the utiltu says that it can't connect to my phone. What do i do. Is there some thing in settings or some hting that i need to change. PLease help. The stcuk screen is really getting me scared.
Wont Run Bootloader
I have tried holding the camera button and soft resetting multiple times, but it keeps getting stuck on the tmobile screen? What do i do??
After I flashed a ROM for the just clean oven, I had this same problem.
I fixed it (after many hours) by downloading this ROM:
http://www.mediafire.com/?clvw3cvyclo
Entering bootloader (hold in camera button and soft-reset.)
Running the tmobile rom.
It was very strange, it took 3 or 4 tries, but it eventually worked.
I don't understand why, since I did nothing differently, but try it afew times.
Hope you get it up and running soon!
BTW, what are your SLP numbers shown on the bootloader screen?
thx really worked
tryed like 4 times then it worked
PuffyTacos said:
After I flashed a ROM for the just clean oven, I had this same problem.
I fixed it (after many hours) by downloading this ROM:
http://www.mediafire.com/?clvw3cvyclo
Entering bootloader (hold in camera button and soft-reset.)
Running the tmobile rom.
Click to expand...
Click to collapse
...worked for me as well. Now, I'm too chicken to run the Hard SPL.
Hi everyone,
Before opening this thread i have done a lot of search about my problem but i could not find any solution. My pocket pc is HTC Touch 3450, it works fine but i want to unlock its CID. I tried every combination to enter bootloader mode (CAMERA + SOFT RESET, or CAMERA+POWER+SOFTRESET etc.) but when i try, it boots normally. Also there is no SD card in it. As i said everything works fine. I tried to upgrade its ROM but i got CONNECTION error in %0 of progress. I know to upgrade ROM i must enter bootloader but as i said i cannot. Also i can try to upgrade ROM via SD card but again i have to enter bootloader mode, but as i said i cannot.
When i try to enter bootloader mode it boots normally and begins the system and works everything fine. I dont know its history, i mean its my new second hand phone.
Anyone, any idea? Please help me!!!!.
Same problem here - 155 views and no answers
Phone turned off. Hold down camera button, press power button to boot, while still holding camera button until the bootloader appears...
If you can't get your device into bootloader and you have tried all options, which it seems like you did. Consider the fact that you may have a clone, where did you purchase the phone from? This issue has been mentioned before, and that was the answer to why the bootloader wouldn't load.
Easy way to tell is check the battery, it'll say HTG instead of HTC.
Tried that matey - no good.
You see I thought that mine was a clone due to the trouble getting into bootloader, but I can see no other reason to believe its a clone, Battery says HTC as well.
I have had plenty of experience updating roms on htc devices but this has me stumped.
unfortunately it is a HTG battery, then it is a clone When i try the combinations, (power off then push power buton+camera button) it doesn't enter bootloader mode.Now i knoe that the problem is being a clone.
My next question is, what is the way to enter bootloader in clone HTC (HTC with a HTG battery)?????
Thanks
same problem. please help
crypto 2008 , same problem here.nobody knows how to do this. please help
It's the same problem for all clones.
Seems there is no way to enter the bootloader mode
Clones enter bootloader by holding the volume slider UP and pressing reset. If you hold the volume slider up and hold the camera button and hit reset you can hard reset it.
Hi, I have an HTC Diamond 2. It stays at the logo screen (black screen with HTC letters in white). It doesn't pass anywhere from there. I've tried using the reset button on the back near stylus, tried the hard reset (Vol Up/Down + Power key) but it doesn't respond. There's an option that "works": If I press the 'call' key + power button, it shows an update menu with the following: 1. Update Logo 2. Update OS 3. Update Eboot 4. Format User Space 5. Return; none work except for the format user space option, but it does nothing.
I've tried also from the PC but it doesn't recognize the device via USB. I downloaded Active Sync, and an update wizard from HTC.com but still no success in recognizing the device.
Please help me, I need this phone to keep working, I don't know what triggered the problem..
Install a new nhb rom and try again.
last day my htc surround got reset..automatically several times...so i decided to downgrade from existing mango to 7 version...using zune... but during downgrade error happened..from then on my screen is like as shown in the pic...i tried hard reset and it failed...now wen connecting to zune it isnt recognizing the device..so help me to solve this....and im just a newcomer to this so i request ur full coperation...pls......
some of details i have about the phone
pd26100 SS-BC(4K)
SPL-4.3.2250.0(128976)MNG
MicroP(LED) 0x09
TOUCH C1(v69)
SD SANDISK 15193MB
Parition Info-v211v413
BL CRC-0x1a11DF74C
OS(SI) CRC-0x61C50C3A
Try to reset your phone to factory default using phone buttons and then restore with Zune (or with WP7 Update Cab Sender).
If you can turn off the phone do it. For unresponsive or frozen phone, remove the battery and put it back again after few seconds.
1. Press Volume up button and hold then press Volume Down button and hold and then press the power button (briefly) to switch the phone on.
2. Keep holding the volume up and volume down buttons until you see a reset screen option.
3. Now follow the instructions that will show up on your mobile screen to factory reset your phone.
If it does not help, flash another ROM (official or custom). But you must understand, that all your information on phone will be erased and you would not be able to restore with existing Zune backup!!!
NiggaWithAttitude said:
Try to reset your phone to factory default using phone buttons and then restore with Zune (or with WP7 Update Cab Sender).
If you can turn off the phone do it. For unresponsive or frozen phone, remove the battery and put it back again after few seconds.
1. Press Volume up button and hold then press Volume Down button and hold and then press the power button (briefly) to switch the phone on.
2. Keep holding the volume up and volume down buttons until you see a reset screen option.
3. Now follow the instructions that will show up on your mobile screen to factory reset your phone.
If it does not help, flash another ROM (official or custom). But you must understand, that all your information on phone will be erased and you would not be able to restore with existing Zune backup!!!
Click to expand...
Click to collapse
i tried factory rest several times but it isnt enough....i saw some posts saying its the problem of sd card...does it have anything to do with it....
mridhulkm said:
i tried factory rest several times but it isnt enough....i saw some posts saying its the problem of sd card...does it have anything to do with it....
Click to expand...
Click to collapse
Try to flash another ROM. Maybe yor restore files at phone are damaged (it is my opinion, don't know about restore technique).
I have read about problem with SD card, but there were another symptoms.