Hi everyone,
Before opening this thread i have done a lot of search about my problem but i could not find any solution. My pocket pc is HTC Touch 3450, it works fine but i want to unlock its CID. I tried every combination to enter bootloader mode (CAMERA + SOFT RESET, or CAMERA+POWER+SOFTRESET etc.) but when i try, it boots normally. Also there is no SD card in it. As i said everything works fine. I tried to upgrade its ROM but i got CONNECTION error in %0 of progress. I know to upgrade ROM i must enter bootloader but as i said i cannot. Also i can try to upgrade ROM via SD card but again i have to enter bootloader mode, but as i said i cannot.
When i try to enter bootloader mode it boots normally and begins the system and works everything fine. I dont know its history, i mean its my new second hand phone.
Anyone, any idea? Please help me!!!!.
Same problem here - 155 views and no answers
Phone turned off. Hold down camera button, press power button to boot, while still holding camera button until the bootloader appears...
If you can't get your device into bootloader and you have tried all options, which it seems like you did. Consider the fact that you may have a clone, where did you purchase the phone from? This issue has been mentioned before, and that was the answer to why the bootloader wouldn't load.
Easy way to tell is check the battery, it'll say HTG instead of HTC.
Tried that matey - no good.
You see I thought that mine was a clone due to the trouble getting into bootloader, but I can see no other reason to believe its a clone, Battery says HTC as well.
I have had plenty of experience updating roms on htc devices but this has me stumped.
unfortunately it is a HTG battery, then it is a clone When i try the combinations, (power off then push power buton+camera button) it doesn't enter bootloader mode.Now i knoe that the problem is being a clone.
My next question is, what is the way to enter bootloader in clone HTC (HTC with a HTG battery)?????
Thanks
same problem. please help
crypto 2008 , same problem here.nobody knows how to do this. please help
It's the same problem for all clones.
Seems there is no way to enter the bootloader mode
Clones enter bootloader by holding the volume slider UP and pressing reset. If you hold the volume slider up and hold the camera button and hit reset you can hard reset it.
Related
I was trying to upgrade to the WM5 rom. But it went wrong and now my smt5600 is not booting up at all. Its DEAD. Anyone have any idea how i can get the phone working again. I connect the phone to the USB cable and there still nothing. HELP somebody....
Can you get it manually in bootloadermode? If that's possible, connect USB & reflash. I don't know how to get a typhoon in bootloader, that's something you've got to find out yourself.
Regards, M
[edit]
& the wiki tells you how to get it in bootloader:
the bootloader
enter bootloader, by turning off device, then hold down camera button, and briefly press the power button.
see http://www.clubimate.com/index.asp?PageAction=DEVICEFAQ_SP3 for more info
an easier way, that does not require the right timing for button presses, is to hook your device to usb, turn it off. press the camera button, it should immediately enter the bootloader.
The phone seems dead. It will not turn on. No lights. It seems if the flash memory is shut down. I tried to flash it with WM5 and look where it got me. I wish I can get to bootload but nothing.
I assume this WM5 'release' wasn't released by your provider, was it? Did they release any official updates & is your phone still covered under warranty? If so try to get it fixed with the claim that you upgraded with the rom they supplied. It's worth to try, cause I don't know no other way than a Service Center to get it functioning again.
BTW was your battery full enough or almost empty?
Feeling with you, M
Hi all !
I can't enter the bootloader screen (screen with blue, green and red stripes) by pressing the volDown key after a soft reset. The phone simply boot on the rom and don't let me see the desired screen.
Is someone can help me to retrieve access to the bootloader screen ?
Radio 2.10.50.8
ROM EnergyRom GTX [13th may 2010]
it shuold be as simple as holding down vol key when powering it on...like you are doing.
u really shutted it fully down and powered on again? or just softreseted via software?
I have tested the two solutions ... I also turn off the device for one day and turn it on pressing the volDown key ... the result was the device booting normally !
Fl3eK said:
I have tested the two solutions ... I also turn off the device for one day and turn it on pressing the volDown key ... the result was the device booting normally !
Click to expand...
Click to collapse
mmh.. and if u want to hard reset ur phone? i mean.. when u press both, volume up and down at the start.. does atleast the hardreset screen appear?
No It change nothing ... I really can't access this screen anymore. I try also to upgrade to HSPL 2.X but the issue persists
Oo thats weird.. for what do u need the screen anyway?
i would flash a new rom maybe.. so the prob could be solved that way, but i really dont know if that will help >.<
try it with the battery cover off to get a better press
power off
press and hold and keep holding vol down
press and release power KEEP PRESSING VOL DOWN
only release vol once three colored screen shows.
samsamuel, I flash my HD2 more and more but since I test the radio 2.10.50.XX, the device just boot normaly and it not let me enter the bootloader screen (I keep the volDown key during booting after turn on the device like you said)
Darksorrow, I need to get back to radio 2.08.50 because the 2.10.50 sucks my battery very quickly ... :'( I'll try to flash the device with an other ROM ... with luck It could give me back the access to bootloader ...
the rom can't affect the bootloader in the same way that your installed operating system on your pc can't affect the bios.
even if you wipe the rom completely you can still enter bootloader.
anyway best of luck.
edit - in using same radio as you.
samsamuel said:
the rom can't affect the bootloader in the same way that your installed operating system on your pc can't affect the bios.
even if you wipe the rom completely you can still enter bootloader.
anyway best of luck.
edit - in using same radio as you.
Click to expand...
Click to collapse
Thanks for the information and after flashing I understand that the bootloader still unavailable by pressing down the volume down button ... Is it possible that this was and hardware problem even if volume keys works well in Sense?
Fl3eK said:
Thanks for the information and after flashing I understand that the bootloader still unavailable by pressing down the volume down button ... Is it possible that this was and hardware problem even if volume keys works well in Sense?
Click to expand...
Click to collapse
Its possible, but unlikely.
I dont mean to sound like i dont believe your results, but i cant help the feeling that you arent doing it right.
Every post so far where someone couldnt enter bootloader / start a hard reset has been down to the order of pressing and the length of the press.
Its usually that they are
1 - pressing and holding both power and vol
or
2 - releasing vol down when they release power
or
3 - not pressing vol hard enough (this is where the battery cover off helps, it allows the button to press more firmly.)
or
4 - pressing power before they press and hold vol.
all of which will fail to enter bootloader.
ill repeat the process, just for clarity.
power off the phone
press hold and keep holding 'vol down'
tap and release power BUT keep vol down pressed
release vol down when the three coloured screen appears.
any more than that i cant suggest, sorry.
Here you go. Give this a shot. Run the cab on your device and there will be a shortcut in your start menu to take you to bootloader
It works fine. Thank you.
zelendel said:
Here you go. Give this a shot. Run the cab on your device and there will be a shortcut in your start menu to take you to bootloader
Click to expand...
Click to collapse
Thanks a lot this work for me too !
@samsamuel : I understand the way you explain me Even if I kept the vol down touch after powering the device I just see the device booting on ROM ...
I have one more question, do you think I can perform a format (with MTTY) considering the fact that I can't access to bootloader at startup ? I hope this work but the risk is that I can't never install a ROM after formatting if I still can't access to bootloader by pressing volume down at startup ....
Thanks Zelender, the file works wonderfully. ...and yes, I'm sure I was using correct procedure to enter bootloader as I had done it before.
I have a similar situation, but I have a Nexus One. I know this is not the area for the N1, but this is the only place where someone is having the same issue of not being able to go to the bootloader. I press vol down while hitting power button. This would always give me the boot loader menu, but instead it just boots to the OS.
Any way I can regain access to the bootloader, because my os is messed up and my radio isnt operating.
Thanks
Hum ... I just process an task 29 via MTTY and the result is .... "phone sent for repair" so for those who have the problem, DO NOT EXECUTE TASK 29 or you'll have a blank phone and you'll can't install new ROM.
I can't return to winmo rom.
zelendel said:
Here you go. Give this a shot. Run the cab on your device and there will be a shortcut in your start menu to take you to bootloader
Click to expand...
Click to collapse
I've the same problem as Fl3ek : I flashed a nand android rom with magldr and I can't return to bootloader mode and I can't make a hard reset. The only thing working is magldr but only for flashing nand android roms (i tried 3 of them : they all work ).
Is there an APK like bootloader.cab ? Or a program to flash or activate bootloader in nand with magldr ?
I tried quick boot with bootloader option but it does'nt work.
I bought the HD2 few days ago, I dont know what the last owner did but HD2 doesn’t wanna start, just stuck on O2 logo and that’s it.
I’ve tried to do hard reset or bootload but ineffective. Can you maybe help me? Thanks in advance.
AdrianW said:
I bought the HD2 few days ago, I dont know what the last owner did but HD2 doesn’t wanna start, just stuck on O2 logo and that’s it.
I’ve tried to do hard reset or bootload but ineffective. Can you maybe help me? Thanks in advance.
Click to expand...
Click to collapse
So you can't get to the bootloader? (holding down vol down from a cold boot)?
Does it show the version information down in the bottom corner when starting?
I've tried many times but nothing happen.
No there is no info about rom/radio etc.
Have you got any ideas how can I get to bootloader?
Remove the SD Card and boot the phone.
Just to confirm you can't get into BootLoader mode - Press and hold the Volume Down button then tap the Power button. Don't let go of the Volume Down button until the Bootloader screen apears.
Thanks, I know how I can get into BootLoader mode but that doesn't work.
Any other ideas?
There is no other way to get into BootLoader mode.
Have you tried booting without the SD Card and checked that there is no bent battery pins?
It may be a faulty volume button or other hardware issue.
If it was a faulty ROM or RADIO then you would still be able to get into BootLoader.
Hello,
I wanted to ask if someone clashed with problem like that and knows how to solve it. I had 1.66 rom eastern euope and installed 2.08hspl, tried to install latest magldr and I am guessing problem occured because I didnt installed latest radio. Now when I am turning on the phone it shows white screen and green logo and stuck. Tried turning of the phone and holding - volume button when turning on that didnt make any difference can someone help me to revive my phone ?
So you tried to get into bootloader, but the thing is you have to try harder.
Bootloader should work just fine.
So again, turn of your phone. while the phone is turned off, keep the vol down, and press the power button.Release the power button, but keep the vol down pressed.
You can try the other way: hold the vol down pressed and reset the phone(red button on the back).
If you want to use the SD card method to flash something you still have to enter the bootloader, so you must keep trying.
Forgot to ask: did you manage to enter the bootloader or not, cause you only said it did not make any difference????.What does that mean?
I already trying to enter bootloader for the five hours, so I guess it's impossible, also tried that thing with red button it didnt load up that bootloader screen. The thing is that holding volume key down didn't work for me before to get into bootloader even when the phone was ok but it did install all roms which I tried so I didnt think that this would be problem either apparantely it is... Maybe youu have some other suggestions how to fix it ?
If you can make the pc recognize the HD2 then you can flash anything.
But i think that this is only possible in bootloader or windows or android.
So this is a problem.
No ideea for now.
Anyone help???
But you *do* push both vol. down and power buttons and keep them pushed until the screen turns on, don´t you?
I didn´t get into the bootloader as long as I didn´t kept both buttons pushed long enough... had to learn the "timing" kind of...
Hi i my htc u11 ultra dual sim is stock, it is rebooting or get stuck what can i do to recover phone
when i turn it on it doesnt pass the screen saying HTC powered by android then restart, if i press volume down and power it gets to a screen but if i choose reboot to bootloader reboots to same screen, if i choose boot to recovery or to download modes it reboots but gets to HTC screen and then reboots.
What can i do to recover my phone, how can i install a rom, so it works again.
HTC ocedug1. s-on radio 2.0.001.0051 OS-2.19.400.1
I being trying to use fastboot but computer doesnt read phone.
Please help is urgent to recover my phone
Can you try boot to download mode (Press volume down when turn on your phone)
It reboots on htc powered by android screen, never pass that screen. and i only enter to bootloader menu direct when pressing volume key and power, i dont have a menu before, and there is i press the download mode or recovery mode phone restarts gets to HTC screen and reboots.
I try using the adb commands but i connect the phone to my laptop, it is shown in devices as android device my htc, but the adb devices never recognize it. So i cant to anything there. I was thinking of using XTC2Clip(no sure if that helps and how it works), but i cant affort to buy that and not work. So any recomendations on what else i can do i will appreciate.
in bootloader screen i have sotftware status official, locked s-on production.. and actually to get to that screen i need to press volumen keys up and down and power for awhile to get there, if i only press volumen down and power when it gets th HTC screen it reboots.
Thanks
jorzavfa said:
It reboots on htc powered by android screen, never pass that screen. and i only enter to bootloader menu direct when pressing volume key and power, i dont have a menu before, and there is i press the download mode or recovery mode phone restarts gets to HTC screen and reboots.
I try using the adb commands but i connect the phone to my laptop, it is shown in devices as android device my htc, but the adb devices never recognize it. So i cant to anything there. I was thinking of using XTC2Clip(no sure if that helps and how it works), but i cant affort to buy that and not work. So any recomendations on what else i can do i will appreciate.
in bootloader screen i have sotftware status official, locked s-on production.. and actually to get to that screen i need to press volumen keys up and down and power for awhile to get there, if i only press volumen down and power when it gets th HTC screen it reboots.
Thanks
Click to expand...
Click to collapse
I don't met that problem before. Maybe your device have hardware problem, i'm not sure. I can not help you. Sorry.
Thanks anyways
Same problem here. It keeps getting in the boot loop forver