Guy,
Please Help
I was upgrading my XDAIIi to Xda IIi ROM v 1.11.162. during which it show an error message and it just went blank looking closely at the screen showing USB at the top of the screen and the bottom of it has v1.01,
when put on the cradle it showing USB.
I have press the reset botton God knows how many times
Please help someone
Were you trying to upgrade to the rom I posted? With RADIO 1.03 in the filename?
You need to press the power, d-button down and the reset button all together.
Then run the update program again. If it is the original O2 rom then it should work fine from there. If it is the rom I posted then the update will fail initially, just run the program a second time without touching your phone at all.
Hope this helps.
No, I am upgrading from O2 website. I am sorry it not connecting to my pc at all. No sign of life ,
it only display USB on the screen
Try doing a hard reset by holding the power button down and pressing the reset button.
Put it into bootloader by pressing the power, d-button down and the reset button all together and releasing them at the same time. The screen should say SERIAL. Connect it to your PC and the screen should then say USB. Then you should be able to run the update.
If this doesn't work as a last resort try taking the battery out for a while to let the backup run down and start again. Whatever happens the phone needs to go into bootloader mode and a rom applied to get it working again.
Please, which is the D-botton you are refering to
The D button is the "Directional" button, in between the green pickup phone button and the red hang up button.
I installed Miri Topaz Keyboard from http://blog.celogeek.com/mobile/mob.../#cg_880601ece8119b663a92f2a39784b881cc20f2b2
And after installation phone request me to phone reset, i clicked OK and than i saw text "smart mobility" with some numberl which look like IP, but i think that was a version number (u know numbers were red). When blackstone should show logo windows, it shown black screen. After reset, and after put out and put in battery, SIM card and memory stick it is showing this same. Please Help.
It looks as if windows mobile is broken, but why? I just installed keyboard. Please help again ;/
WM 6.5 Miri Manila 2.5 v.13
Domin1992 said:
I installed Miri Topaz Keyboard from http://blog.celogeek.com/mobile/mob.../#cg_880601ece8119b663a92f2a39784b881cc20f2b2
And after installation phone request me to phone reset, i clicked OK and than i saw text "smart mobility" with some numberl which look like IP, but i think that was a version number (u know numbers were red). When blackstone should show logo windows, it shown black screen. After reset, and after put out and put in battery, SIM card and memory stick it is showing this same. Please Help.
It looks as if windows mobile is broken, but why? I just installed keyboard. Please help again ;/
WM 6.5 Miri Manila 2.5 v.13
Click to expand...
Click to collapse
Hi Domin1992,
as stated above, you have mentioned that you performed a reset - was this a soft reset only with your stylus?
If you are unable to power on your phone at all, then there may be a possibility that you have a hardware issue (could be a problem with the motherboard circuit or battery).
How do you charge your phone? Via the mains adapter, or the USB link?
Try connecting your phone via your external power source using your mains charger or via USB cable and leave it for 2-3 hours and see if it picks up. (also look on device for indication of it receiving power by the lit LED).
If you have a charged battery insert it and power on the phone. If your phone doesn't have a hardware damage it should start. If it powers on (with the phone powered on, regardless of what's been displayed), then try performing a hard reset - especially if you cannot load the Manilla interface then i think you should try doing this. Also note that by performing a hard reset, you will lose all data stored in your phones RAM (this excludes data stored on your MicroSD card)
Regards.
After installation, device was doing reset after I clicked OK when device request me to do it.
When my device didn't want to load windows logo, I take out battery (device don't working without battery during is pluging to external power source) and I used stylus to reset.
I used to charge my device via mains adapter. You know it is USB link plugged to small box which is going to socket.
Today morning I pluged my device to external power source, and want to power on. After 10 minutes there is text.
"The device is unable to boot because either you have tourned off the device incorrectly or tried to install an application from untrusted source. Press Volume Up to rest your device or press your other button to cancel. This operation will delete all your personal data and restore the device to it's factory default settings."
Ok thats great, but i try to press Volume Up and I haven't reaction.
No one button isn't working.
I have to press this button once, 5sec or 10sec?
This is a hard reset. You should pres the button just once.
You should tell us if you can enter the bootloader,you used HSPL or USPL, this way someone could help you.
My opinion is that you should flash again using the card method.But for this to work you should have the HSPL and be able to enter bootloader.
So some more info would be good.
Good luck.
OK..
I have HSPL.
I downloaded bootloader from http://forum.xda-developers.com/showthread.php?t=347700
I set all what I should and press ok and than I see "USB port can not open".
I can't find card method for blackstone.
Ok.
It is simple enough.Just folow the next steps:
1. Download a rom that you like.
2. Rename the .nbh file to BLACIMG.nbh.
3. Copy BLACIMG.NBH into the root dir of your Storage Card.
4. Be sure to have at least 30% of charge.
5. Turn off your device by using the Power Button
6. Go to bootloader mode. Push and hold Vol Down + press Power button.
7. As soon as presented the message, push Power button to start flashing or Volume Down button to cancel.
8. The whole procedure will take about 3 minutes. After you finish and see the relative message, soft reset your device, you are ready.
Good luck and keep us posted.
Now I have problem with bootloader mode. I put in micro sd, turn on bootloader mode (poweron with volume down) and than in device I have
"Black100 32M
SPL-1.56.oliNex
MicroP-BlackStone (LED) v6"
on red-green-blue-white background
And for half second device show
"Loading!
No Image file"
Whats wrong?
2 Things:
1) Make sure you called the file BLACIMG
2) Make sure you place the file in the root of your SD card, not a folder.
Everything I did, how you told me. It isn't working still.
OK.. Thank you very much.
My device is working now.
I cant belive i just put in SIM card
And restore device to factory default settings.
Thank you a lot.
Domin1992 said:
OK.. Thank you very much.
My device is working now.
I cant belive i just put in SIM card
And restore device to factory default settings.
Thank you a lot.
Click to expand...
Click to collapse
Excellent
Domin1992 said:
OK.. Thank you very much.
My device is working now.
I cant belive i just put in SIM card
And restore device to factory default settings.
Thank you a lot.
Click to expand...
Click to collapse
You are welcome. Glad that all is good.
Hi everybody,
First, sorry for my poor english, i try to explain the best i can.
My HD2 is on one of the first Phone 7 release 01/2011 ago.
I want go back on stock rom, cause recently, i've a bug, my phone can't boot. It stay on Phone7 logo and next reboot.
Without my SD card, the phone boot, but it's in english, and My computer recognyze it on " Windows Phone7 " with yellow exclamation point.
I've tried to flash 6.5 stock rom with usb cable, but it's said it can't connect the device.
To go on flash screen, i push reboot+power off+ vol down button. Next on emagldr 1.13 screen, i select "5.usb flasher".
Next i can check on my computer's now recognyzed as " Microsoft USB Sync", but the stock rom still not abble to work:" no phone response, check usb cable"
I'm sure that my usb cable is working.
Any suggestion ?
You might try going into the normal bootloader, not into MAGLDR.
Push both vol. down and power buttons until the device starts into the multicolor bootloader screen, then connect the USB cable.
If you didn´t change your PC, it should now be able to connect via ActiveSync.
tictac0566 said:
You might try going into the normal bootloader, not into MAGLDR.
Push both vol. down and power buttons until the device starts into the multicolor bootloader screen, then connect the USB cable.
If you didn´t change your PC, it should now be able to connect via ActiveSync.
Click to expand...
Click to collapse
Thanx for your answer, i think the bug is here i cannot enter normal tri-color bootloader, it doesnt work :s
When i do power+ vol down until the device start, i first have a blank Htc screen maybe 1sec, and quikly next boot menu from MAGLDR 1.13
However, i'm sure that my Vol Down button work, it works on magldr menu.
try pulling out the battery, then hold down the two volume buttons, as hard as you can safely get away with, pop the battery back in whilst still holding buttons down, if it doesnt start tap the power button. keep holding down the buttons through out the whole process until it comes on.
if you can read the content of your sd card in pc then you can flash WinMo6.5 rom via sd card.... :
- go to HTC website, download appropriate rom for your HD2 with your s/n
- extract NBH file from downloaded ROM (can be done with 7-zip, Winzip...)
- rename extracted IMG file to LEOIMG.NBH
- copy that file to SD card
- boot your HD2 with SD card while holding VOL DOWN
- you should see a flash menu appear, press VOL DOWN again (if i remember.. ) and you'll flash 6.5 rom
- that's it, you'll have new instance of WinMO 6.5, with stock SPL, without MAGLDR and ANY trace of WP7.-..
oh, if you dont see anything on your SD card or you cant copy to it, it is locked and you have to format it either with some utility or in a Nokia N, E series phone... I know for a fact that N79 works
this should do the trick...
sb2003 said:
if you can read the content of your sd card in pc then you can flash WinMo6.5 rom via sd card.... :
- go to HTC website, download appropriate rom for your HD2 with your s/n
- extract NBH file from downloaded ROM (can be done with 7-zip, Winzip...)
- rename extracted IMG file to LEOIMG.NBH
- copy that file to SD card
- boot your HD2 with SD card while holding VOL DOWN
- you should see a flash menu appear, press VOL DOWN again (if i remember.. ) and you'll flash 6.5 rom
- that's it, you'll have new instance of WinMO 6.5, with stock SPL, without MAGLDR and ANY trace of WP7.-..
oh, if you dont see anything on your SD card or you cant copy to it, it is locked and you have to format it either with some utility or in a Nokia N, E series phone... I know for a fact that N79 works
this should do the trick...
Click to expand...
Click to collapse
except he hasnt been able to get in to the bootloader as the previous posts to your suggest
dazza9075 said:
except he hasnt been able to get in to the bootloader as the previous posts to your suggest
Click to expand...
Click to collapse
huh, must be that i'm blind missed it completely
Thx for taking time to help me,
So, if i push vol up and down, i 've a screen, next the screen loading wph 1,2,3,4 Go.
I read on it "This operation will 1.delete all your personal data, and reset all setting to manufacturer default. 2. Calculate CRC checksum. Press Voldown to restore manufacturer default, or press Vol Up to get CRC, or press other keys to cancel".
But,
Nothing happend if i press vol down, or volUp or other buttons :s
Maybe we've to try another way to get into bootloader, i think my poor batterie level is bugging the bootloader.
So, I known that we can't acces bootloader via windows.
I'm on Seven x64, my hd2 is recognyzed as a phone7 Device, with a yellow "!".
If i launch HSPL 4, with administrator right, and XP SP2 compatibility level, it can't acces via USb. " no response".
Any suggestions ? May i change the driver?
right, well that proves the buttons are working, i think its just a case of not having them held in at the right time
pop the battery out, hold down the vol down button on its own and keep it held down, put the battery back in and if it doesnt restart tap the power button.
dont let go of the vol down button
Yep, i've done this maybe 30 or 40 times, no way, no bootloader.
I4ve found a thread that explain to fullu charge the battery, remove it and wait 24H before, do the operation ( vol down, putt battery still vol down, push power stil vol down) No way, this doesn't work :s
So i've order a new battery, maybe it'll resolve the problem, i hope. See when it arrive.
Oh dear, well if you definitely cant get in to bootloader and the keys do work then that's a problem, I doubt a battery will fix it but id be interested in knowing if it does work, good luck! Is been reading quite a bit about fixing devices via the wee metal points inside devices, I wonder I the points inside the hd2 will allow this...
Sent from my HD2 using XDA Windows Phone 7 App
I'm not sure i've understand all your reply Dazza, are u suggesting to check the 3 pin connector baterry on my HD2 ?
If it's this, i've already check this, the 3 pin are good, and i've put a graphyte electrical dust on it to improve the contact.
Nope, I mean if you pop the battery cover off there are 3 metal connectors next to the sim card, it seems on some devices people have found similar points and managed to connect the device to a serial port on a pc, then had direct access to the device bypassing the bootloader. I don't think anyone done this for the hd2 yet but apparently this will fix a completely bricked device
Sent from my HD2 using XDA Windows Phone 7 App
Ok ! Maybe if the new battery won't resolve, i'll try something like that
Its complicated an as far as i know its not been done for the hd2, im not even sure that's the correct points but its a possibility. There are another 2 points on the opersite side to the volume buttons under the battery cover.
Sent from my HD2 using XDA Windows Phone 7 App
Hi, I was in the middle of Flashing my Acer Neotouch S200 when the usb got knocked out. I now cannot get back into bootloader mode at all. I try to do this by holding the camera, volume and power buttons while holding down the reset button.
I simply go into the clean boot screen where it is stuck. Please, please help! Is there anything that will let me flash it again?
One other thing, if an microSD card is inserted into the slot and I try to get it into bootloader mode, the blue led turns on then the red led flashes twice every 5 seconds. Is that normal because it did it before the flashing process was interrupted but when I took the microSD card out the PC would recognize it to be in bootloader mode.
I tried looking on other posts but nothing worked
Problem Solved!I managed to get it into bootloader mode by pressing volume down, camera and power buttons while holding down reset rather than having both volume buttons.
did you do backup?
please i need an English rom to install in my s200 neo touch acer. my acer s200 is stuck in clean boot, i was able to get to bootloader and my acer usb port was installed on my pc, now i need to flash and installed a new rom but i dont have a rom and dont know how to installed it. please helpppppppppppppp. my acer rom is s200_2.003.00_IT but i want an english rom as this one is in italy. Thanks
owltop420 said:
Hi, I was in the middle of Flashing my Acer Neotouch S200 when the usb got knocked out. I now cannot get back into bootloader mode at all. I try to do this by holding the camera, volume and power buttons while holding down the reset button.
I simply go into the clean boot screen where it is stuck. Please, please help! Is there anything that will let me flash it again?
One other thing, if an microSD card is inserted into the slot and I try to get it into bootloader mode, the blue led turns on then the red led flashes twice every 5 seconds. Is that normal because it did it before the flashing process was interrupted but when I took the microSD card out the PC would recognize it to be in bootloader mode.
I tried looking on other posts but nothing worked
Problem Solved!I managed to get it into bootloader mode by pressing volume down, camera and power buttons while holding down reset rather than having both volume buttons.
Click to expand...
Click to collapse
You Done Good Thing for Correct Bootloader Mode Instruction. . .
Thanks For Share Buddy!
Now You Can Search in google this >>> OS_ACER_2.003.00.EN_WM65_neoTouch
and Install ENGLISH ROM!
Good Luck!
Hi there.
yesterday my pad told me there was a new version , so i updated it (at least tried)
Now when i start up my tab i get the following:
Enter into fastboot mode
You can press HOME + BACK to reboot device.
so i wated,, and waited and nothing happend when i press HOME + Back the device will restart but i will get the spalsh screen and aftrewards the same text again..
i checkd the form and found no body with this issue, i tried to re-install the firmware.
so i took the micro SD card Fomrated it (first time FAT 32 second time FAT) and put the dlload folder with the told version on it..
took my battery from my device placed it in again and pressed power button, device starts up and i get the same message again, and NO progress bar ..
please help me with this issue....
Bricked IDEOS S7
If you have not already got your S7 back to working condition you may try the following. I faced similar situation(s) some time back.
Requirement: External sdcard formatted in FAT32 and with dload directory with firmware installed on the unit. Use Indonesian stock firmware Froyo 2.2.2. Search around and it is easy to find. Make sure one of the files is unlmt.cfg and not any other. No glitches and all modules work fine. Since I have been experimenting with different ROMs and some personal mods I have flashed so many times, got lost and started all over again.
It is not necessary to have a battery installed but the charger must be connected.
1. Press Back and Power button together to startup and release Power button after few seconds. You should see a white bar. Release Back button.
2. After a few sec disconnect power charger.
3. Reconnect the charger. Press power button. You will a stable IDEOS for few sec and flashing will start.
At times you may have to repeat more than once to get it going. The blinking should be slow. If suddenly flashing stops after few bars or blinking frequency jacks up disconnect and try again.
Best of luck.