Database Users

Help my Athena

Dear All
Sorry for bothering you all, I have search the net for a solution with no luck. Finally, I decide to post my problem here.
While I a upgrading my Athena 7500 from cooked rom to P4 rom, by mistake I removed the USB cable. I reconnect it but the PC said usb can’t be detected. I hard rest my phone. It showed the firs colored screen then went to white screen with the following messages
((Prewss ACTION to restore factory default
Press Camera key to xist))
When I press CameraKey its turn of
Then if I hard resut again and then I
pressed the ACTION. It shows “please white” for seconds. Then showed the following
((Restore default completed
Press Power key to boot
Press CommManager key to formate micro drive
))
If I go for any those option I will end with phone off(no light no screen)
When I connect my phone by USB with any PC is not detected it at all even as unknown device. When I put it in the charger no light indicated that it is charging.
I extract the NBH file from the orginal rom and but it in SD card (fat32 formated) and rename it as ATHEIMG.nbh . hard rest but the same result
How I could return back my Athena?
Thanks in advance

same thing but...
...happened to me, but I didnt flash any rom or radio or even changed bootloader...It was wrking fine one day, and next day it wont boot-up, screen not lit at all. It enters bootloader and I can hard-reset it, but no use...screen not lit and as far as I can see..it doesnt boot...when I connect it to the comp in bootloader it says USB...computer doesnt recognize it otherwise...when I turn on the device, only joystick lights green...as same as when its charging - then its red...
After that tried flashing from the card, connecting it to the MTTY, no use...
no reaction from any of the buttons, keyboard...it turns it self when I remove battery...any ideas?

Are you try Reboot from SD_Card... ???

how to reboot from SD Card? anyone can help me on this I have same problem...
thanks in Advance!

[Q] Hardreset hardware key combo?

Two days after the sdcard swap, suddenly im getting stuck at the dell bootup screen and wont boot up (not boot loop, just showing "dell" forever). first i suspect the sdcard is faulty, but it worked fine on the hd7 after hard reset, so i insert it back to the venue pro and try to bootup and hard reset it... guess what, i cant boot up the phone. Now i thought i can go into the reset screen like i did on the hd7 and hard reset it via bootloader, but after much searching, i cant access the format screen, only the "connect to pc" screen. Swapping to the original 8gb sdcard, i get infinite bootloop.
Supposedly the hardware key combo for hardreset is VolDown + Camera, but that brought me to the "connect to pc" screen; i also tried VolDown + VolUp, VolUp + Camera, VolUp + VolDown + Camera, nothing works
anyone got any idea?

have you tried power off and then hold vol up and down and while holding them down hit the power button, or power off and the vol up or down plus camera

nope... all of them brought me to the connect to pc screen
can anyone with the newly arrived batch of DVP try to get into the reset screen on boot?

Does anyone know the soft reset key combination?

Settings -> About -> At the bottom of screen <RESET YOUR PHONE>

cdgoin said:
Settings -> About -> At the bottom of screen <RESET YOUR PHONE>
Click to expand...
Click to collapse
Sorry, I meant the actual physical key combo. My phone has locked up a couple of times, and I've had to result to removing and replacing the battery.

the reason im asking this is because my 32gb card went corrupted (tried on hd7, also cant get it to work after hard reset), when i put the original 8gb card in, it went into bootloop. the only way i can think of to get it to work is do a hard reset during bootload, which requires a special hardware button combination, but it seems the venue pro is hardware key locked...

This is supposedly the combo:
Hard reset Dell Venue Pro
1. Turn the phone off. If it won’t respond to holding down the Power button, pull the battery from the phone.
2. Press and hold the Camera and Volume Down buttons simultaneously.
3. Press and release the Power button while continuing to hold down Camera and Volume Down.
4. Release the buttons once the format screen appears.
5. Press the Windows button.
6. Press the Windows button again to confirm the hard reset.
The Dell Venue Pro will then go through the process of restoring the phone to its factory default settings.
Make sure you are not releasing the button combo vol down/camera until the format screen appears.

sureloch said:
This is supposedly the combo:
Hard reset Dell Venue Pro
1. Turn the phone off. If it won’t respond to holding down the Power button, pull the battery from the phone.
2. Press and hold the Camera and Volume Down buttons simultaneously.
3. Press and release the Power button while continuing to hold down Camera and Volume Down.
4. Release the buttons once the format screen appears.
5. Press the Windows button.
6. Press the Windows button again to confirm the hard reset.
The Dell Venue Pro will then go through the process of restoring the phone to its factory default settings.
Make sure you are not releasing the button combo vol down/camera until the format screen appears.
Click to expand...
Click to collapse
it does not work; just goes to the "connect to pc" screen

i'll second this. i cannot find information on a physical key combo that will let me hard reset the device. mine is stuck in bootloop with or without the microsd installed.
is there any other way to hard reset it? can i connect it via some program? zune won't restore it, i'm willing to try others.

wolfdtx said:
i'll second this. i cannot find information on a physical key combo that will let me hard reset the device. mine is stuck in bootloop with or without the microsd installed.
is there any other way to hard reset it? can i connect it via some program? zune won't restore it, i'm willing to try others.
Click to expand...
Click to collapse
There is NO magic key combination for the DELL. The combination here only will take you to download mode. IF you had a backup on your PC, the DELL would read that backup and restore to previous mode.
Pulling the card has a greater danger than anything else. If you turn your device off and pull the card, without a hard reset, you have the chance to Brick your device. Pulling a card should ONLY be accompanied by a hard reset. Be skeptical of anyone that says pull your card and swap it without a hard reset. They wither got real lucky, which i doubt, or they are using WP7 on an HD2 device. NOT THE SAME THING.
If you have swapped a card NOT using the recommended instructions, you may not be able to restore your device. ALL card swaps, both removal and insertion, should be as part of a hard reset. the TYPE of card does NOT matter. The PROCESS matters. The card type only impacts the storage amount, hangs, freezes, etc. To put your phone in position to change cards, there is only 1 way...
To Remove a SD card from the DELL
>>>>>>>>
1. Hard reset device
2. Before the phone reboots...pre logo's, pull battery and pull card.
3. Put battery back in and start
4. On the Get started screen, run through phone setup.
>>>>>>>>
To insert a new card in a DELL
5. From a Working Dell, repeat steps 1&2.
6. Insert new card
7. repeat 3&4.
8. Your Device should be functional.
>>>>>>>>>>>>>>>>>>>>
Occassionally with a new card, you might get a storage card not working message. I've seen this message several times using 16g cards above class 4. To resolve this:
1. Pray
2. Pull the battery and reset the SD card. DO NOT REPLACE CARD.
3. Insert Battery and restart
4. Pray.
5. Repeat as necessary. I have on a few occassions had to do this 4 times.
If you get this message, and your card is properly seated, STRONGLY consider a new card. The message indicates your device is NOT seeing your card. Change it. MAKE sure you change it using the steps above.
NO SHORTCUTS. If you don't understand these instructions, don't change the card. Be clear. If your device gets bricked, there are very few options available to you.....none that do not involve DELL....that I know of.

theclueless said:
Two days after the sdcard swap, suddenly im getting stuck at the dell bootup screen and wont boot up (not boot loop, just showing "dell" forever). first i suspect the sdcard is faulty, but it worked fine on the hd7 after hard reset, so i insert it back to the venue pro and try to bootup and hard reset it... guess what, i cant boot up the phone. Now i thought i can go into the reset screen like i did on the hd7 and hard reset it via bootloader, but after much searching, i cant access the format screen, only the "connect to pc" screen. Swapping to the original 8gb sdcard, i get infinite bootloop.
Supposedly the hardware key combo for hardreset is VolDown + Camera, but that brought me to the "connect to pc" screen; i also tried VolDown + VolUp, VolUp + Camera, VolUp + VolDown + Camera, nothing works
anyone got any idea?
Click to expand...
Click to collapse
I'm having the same problem with my new dell venue pro. If you resolved this, please post how.
THanks a lot!!!

Really about to solve the problem ?
Hi there,
You say there is few options available to get the phone working again and none of that involves Dell Venue pro .... ... can you share this ?
alodar1 said:
There is NO magic key combination for the DELL. The combination here only will take you to download mode. IF you had a backup on your PC, the DELL would read that backup and restore to previous mode.
Pulling the card has a greater danger than anything else. If you turn your device off and pull the card, without a hard reset, you have the chance to Brick your device. Pulling a card should ONLY be accompanied by a hard reset. Be skeptical of anyone that says pull your card and swap it without a hard reset. They wither got real lucky, which i doubt, or they are using WP7 on an HD2 device. NOT THE SAME THING.
If you have swapped a card NOT using the recommended instructions, you may not be able to restore your device. ALL card swaps, both removal and insertion, should be as part of a hard reset. the TYPE of card does NOT matter. The PROCESS matters. The card type only impacts the storage amount, hangs, freezes, etc. To put your phone in position to change cards, there is only 1 way...
To Remove a SD card from the DELL
>>>>>>>>
1. Hard reset device
2. Before the phone reboots...pre logo's, pull battery and pull card.
3. Put battery back in and start
4. On the Get started screen, run through phone setup.
>>>>>>>>
To insert a new card in a DELL
5. From a Working Dell, repeat steps 1&2.
6. Insert new card
7. repeat 3&4.
8. Your Device should be functional.
>>>>>>>>>>>>>>>>>>>>
Occassionally with a new card, you might get a storage card not working message. I've seen this message several times using 16g cards above class 4. To resolve this:
1. Pray
2. Pull the battery and reset the SD card. DO NOT REPLACE CARD.
3. Insert Battery and restart
4. Pray.
5. Repeat as necessary. I have on a few occassions had to do this 4 times.
If you get this message, and your card is properly seated, STRONGLY consider a new card. The message indicates your device is NOT seeing your card. Change it. MAKE sure you change it using the steps above.
NO SHORTCUTS. If you don't understand these instructions, don't change the card. Be clear. If your device gets bricked, there are very few options available to you.....none that do not involve DELL....that I know of.
Click to expand...
Click to collapse

[Q] Cant go back on 6.5 Stock Rom

Hi everybody,
First, sorry for my poor english, i try to explain the best i can.
My HD2 is on one of the first Phone 7 release 01/2011 ago.
I want go back on stock rom, cause recently, i've a bug, my phone can't boot. It stay on Phone7 logo and next reboot.
Without my SD card, the phone boot, but it's in english, and My computer recognyze it on " Windows Phone7 " with yellow exclamation point.
I've tried to flash 6.5 stock rom with usb cable, but it's said it can't connect the device.
To go on flash screen, i push reboot+power off+ vol down button. Next on emagldr 1.13 screen, i select "5.usb flasher".
Next i can check on my computer's now recognyzed as " Microsoft USB Sync", but the stock rom still not abble to work:" no phone response, check usb cable"
I'm sure that my usb cable is working.
Any suggestion ?

You might try going into the normal bootloader, not into MAGLDR.
Push both vol. down and power buttons until the device starts into the multicolor bootloader screen, then connect the USB cable.
If you didn´t change your PC, it should now be able to connect via ActiveSync.

tictac0566 said:
You might try going into the normal bootloader, not into MAGLDR.
Push both vol. down and power buttons until the device starts into the multicolor bootloader screen, then connect the USB cable.
If you didn´t change your PC, it should now be able to connect via ActiveSync.
Click to expand...
Click to collapse
Thanx for your answer, i think the bug is here i cannot enter normal tri-color bootloader, it doesnt work :s
When i do power+ vol down until the device start, i first have a blank Htc screen maybe 1sec, and quikly next boot menu from MAGLDR 1.13
However, i'm sure that my Vol Down button work, it works on magldr menu.

try pulling out the battery, then hold down the two volume buttons, as hard as you can safely get away with, pop the battery back in whilst still holding buttons down, if it doesnt start tap the power button. keep holding down the buttons through out the whole process until it comes on.

if you can read the content of your sd card in pc then you can flash WinMo6.5 rom via sd card.... :
- go to HTC website, download appropriate rom for your HD2 with your s/n
- extract NBH file from downloaded ROM (can be done with 7-zip, Winzip...)
- rename extracted IMG file to LEOIMG.NBH
- copy that file to SD card
- boot your HD2 with SD card while holding VOL DOWN
- you should see a flash menu appear, press VOL DOWN again (if i remember.. ) and you'll flash 6.5 rom
- that's it, you'll have new instance of WinMO 6.5, with stock SPL, without MAGLDR and ANY trace of WP7.-..
oh, if you dont see anything on your SD card or you cant copy to it, it is locked and you have to format it either with some utility or in a Nokia N, E series phone... I know for a fact that N79 works
this should do the trick...

sb2003 said:
if you can read the content of your sd card in pc then you can flash WinMo6.5 rom via sd card.... :
- go to HTC website, download appropriate rom for your HD2 with your s/n
- extract NBH file from downloaded ROM (can be done with 7-zip, Winzip...)
- rename extracted IMG file to LEOIMG.NBH
- copy that file to SD card
- boot your HD2 with SD card while holding VOL DOWN
- you should see a flash menu appear, press VOL DOWN again (if i remember.. ) and you'll flash 6.5 rom
- that's it, you'll have new instance of WinMO 6.5, with stock SPL, without MAGLDR and ANY trace of WP7.-..
oh, if you dont see anything on your SD card or you cant copy to it, it is locked and you have to format it either with some utility or in a Nokia N, E series phone... I know for a fact that N79 works
this should do the trick...
Click to expand...
Click to collapse
except he hasnt been able to get in to the bootloader as the previous posts to your suggest

dazza9075 said:
except he hasnt been able to get in to the bootloader as the previous posts to your suggest
Click to expand...
Click to collapse
huh, must be that i'm blind missed it completely

Thx for taking time to help me,
So, if i push vol up and down, i 've a screen, next the screen loading wph 1,2,3,4 Go.
I read on it "This operation will 1.delete all your personal data, and reset all setting to manufacturer default. 2. Calculate CRC checksum. Press Voldown to restore manufacturer default, or press Vol Up to get CRC, or press other keys to cancel".
But,
Nothing happend if i press vol down, or volUp or other buttons :s

Maybe we've to try another way to get into bootloader, i think my poor batterie level is bugging the bootloader.
So, I known that we can't acces bootloader via windows.
I'm on Seven x64, my hd2 is recognyzed as a phone7 Device, with a yellow "!".
If i launch HSPL 4, with administrator right, and XP SP2 compatibility level, it can't acces via USb. " no response".
Any suggestions ? May i change the driver?

right, well that proves the buttons are working, i think its just a case of not having them held in at the right time
pop the battery out, hold down the vol down button on its own and keep it held down, put the battery back in and if it doesnt restart tap the power button.
dont let go of the vol down button

Yep, i've done this maybe 30 or 40 times, no way, no bootloader.
I4ve found a thread that explain to fullu charge the battery, remove it and wait 24H before, do the operation ( vol down, putt battery still vol down, push power stil vol down) No way, this doesn't work :s
So i've order a new battery, maybe it'll resolve the problem, i hope. See when it arrive.

Oh dear, well if you definitely cant get in to bootloader and the keys do work then that's a problem, I doubt a battery will fix it but id be interested in knowing if it does work, good luck! Is been reading quite a bit about fixing devices via the wee metal points inside devices, I wonder I the points inside the hd2 will allow this...
Sent from my HD2 using XDA Windows Phone 7 App

I'm not sure i've understand all your reply Dazza, are u suggesting to check the 3 pin connector baterry on my HD2 ?
If it's this, i've already check this, the 3 pin are good, and i've put a graphyte electrical dust on it to improve the contact.

Nope, I mean if you pop the battery cover off there are 3 metal connectors next to the sim card, it seems on some devices people have found similar points and managed to connect the device to a serial port on a pc, then had direct access to the device bypassing the bootloader. I don't think anyone done this for the hd2 yet but apparently this will fix a completely bricked device
Sent from my HD2 using XDA Windows Phone 7 App

Ok ! Maybe if the new battery won't resolve, i'll try something like that

Its complicated an as far as i know its not been done for the hd2, im not even sure that's the correct points but its a possibility. There are another 2 points on the opersite side to the volume buttons under the battery cover.
Sent from my HD2 using XDA Windows Phone 7 App

[Q] advanced config broke my phone!

yeah AdvancedConfig 1.4.0.0 Mango beta
just broke my mango! bttfv2!
i added #AA0080FF to custom colors for tiles
named the color cblue!
i was trying to make a transperent tile!
cblue clear blue!
anyway i went to setting and set the tile and my phone turned off!
when it restared i get to mango boot screen and then everythang is black!
zune sincks with the phone & then dose'nt work if i try to resink on replug it dosent work i cant deploy any cabs or xap's i cant see anythang exept my wifi logo and battery and clock at the very top of the screen everythang else is compleatily black!
and the os seams to have totaly stoped working because even if i could'nt see what i was doing i should still beable to deploy an xap or lanch an app but nothings working
i cant do a hard reset!
so what should i do now?
edit:the clock seams to still be working!

turn off phone (or pull battery)
press VolumeUp and Down together and press Power

dxdy said:
turn off phone (or pull battery)
press VolumeUp and Down together and press Power
Click to expand...
Click to collapse
and whats that susposed to do?
restore completed but it didnt fix the problum!
and it didnt seam like it worked ither because the dots on the boot logo wear blue insted of mango colored

If you (b)acked up and sent a cab recently, try (r)estore in cab sender.
Worth a go.
edit sorry just saw your edit

Robbie P said:
If you (b)acked up and sent a cab recently, try (r)estore in cab sender.
Worth a go.
edit sorry just saw your edit
Click to expand...
Click to collapse
wp7 cab sender is useless! Zune dose'nt even start on plug! The phone dose'nt sink! Windows phone 7 power tools & Windows phone sdk 7.1 dose not detect the phone!
if i start the phone wile pluged zune starts but then i get connection error and no program still works!
btw i never made a backup with wp7 cab sender!
and
dxdy said:
turn off phone (or pull battery)
press VolumeUp and Down together and press Power
Click to expand...
Click to collapse
how come this didnt actuly restore me to stock settings?
whats next? any more sugjestions? can anyone help? =(

jackrabbit72380 said:
how come this didnt actuly restore me to stock settings?
Click to expand...
Click to collapse
this is hard reset...

dxdy said:
this is hard reset...
Click to expand...
Click to collapse
yeah but it says ...
This operation will delete all your personal data and reset all your settings to manufacturer default. press volup to restore manufacturer default, or press other keys to cancel.
the loding bar just blinks for 1 sec and says restore... completed press volup to boot
I press up and it dose'nt seam like the restore process is working!
becuae my dots on teh boot logo are blue and stock settings would be red!
if im not mistaken!
the first time you boot mango the dots and color tiles are red!
so...???
so confused!

If you've activated "find my phone" on SkyDrive, go to https://devices.live.com. Select your phone in the list, then Find My Phone. That takes you to a page where, among other things, is an option entitled "Erase my phone". This is a factory reset. You'll lose all your data, but you'll get your phone back.
(Been there, done that.) Hope this helps.

nope!
piaqt said:
If you've activated "find my phone" on SkyDrive, go to https://devices.live.com. Select your phone in the list, then Find My Phone. That takes you to a page where, among other things, is an option entitled "Erase my phone". This is a factory reset. You'll lose all your data, but you'll get your phone back.
(Been there, done that.) Hope this helps.
Click to expand...
Click to collapse
i got
We can't erase your phone right now, but we'll keep trying. (?)
Send me email if my phone is erased.
We're trying to erase your phone. This usually takes 30 seconds. You'll no longer be able to map, ring or lock your phone.
The number you gave us isn't working. Try entering it again.
that probly wasnt a good thang to do!
but next?!
ps:ill i see is wifi logo,clock & signal bar wich has the o smoking sine!
the battery icon no longer shows! and because it dosent charge wile off i feal im running out of time!
========================================================
edit okay well i made some progress
i removed the micro sd card and afte a long wait at the boot logo mango boote red and was greted with a storage card not working logo the good thang is my battery indicater is showing
unfortunatly i cant keep going! because my only to options are
emergency or turn off
clicing turn off
reboots
blue dots agin black screen! =(
i tryed sticking the sd card in at the htc boot 2nd splash and i got sd card error if i dont get that i get black screen!
what would happec if i clicked emergency?

XBmod -Do hard reset after all update if you have freeze or any problem
(When Magldr show WPH LOAD 12345 GO GO GO Press Vol+ & Vol- then after the new screen press VOL- twice.)
Edit put sd in

Robbie P said:
XBmod -Do hard reset after all update if you have freeze or any problem
(When Magldr show WPH LOAD 12345 GO GO GO Press Vol+ & Vol- then after the new screen press VOL- twice.)
Edit put sd in
Click to expand...
Click to collapse
wow
this option will 1. delete all your personal data, and reset all your settings to manurer default 2 .calculate crc checksum.
press voldown to restore manufacturer default or press volup to ger crc or press other keys to cancel
PROBLUM SOLVED THANK YOU SO MUCH!!!
AND THANKS TO EVERYONE WHO TRYED TO HELP!!!

Advanced config 1.4 broke my xaps!
After checking the enable wifi n and prevent re-lock buttons in "tweaks" and rebooting, all my xaps don't work!
It happened with 1.3 too and I posted this thread http://forum.xda-developers.com/showthread.php?t=1275303
Have since tried to send unlock_remove.cab then unlock.cab as XBmod suggested but no joy. Had to go back to restore point and reload apps, music etc.
I have posted this on Schap's site.
Points to note; If everything is working fine with you, send any cab using (B)ackup, it is your friend. And don't try to enable wifi n or prevent re-lock using Advanced Config.
Edit; confirm the prevent re-lock as culprit

[HELP] Restoring of brick Huawei U8800

Restoring of brick Huawei U8800.
All do at your own risk! I am not responsible for your machines!
Today I was able to magically (just wonderful, because it found the time at which there is a chance to run the update) to recovery from a brick Huawei U8800 (corrupted bootloader + recovery not run + in a pink screen not mounted hard drive + when trying to update the written Update failed! I spoke to a service center, they said the warranty is not the case and we must change the motherboard (the cost of 3-4 million BYR, new at the MTS salon cost 2.9 million BYR )
What and how I did:
1) To restore I'am using the firmware B162 Android.
2) Format the micro SD card that was clean (I was 8 gb, 2 class and be sure to FAT 32) and unpack "dload" folder and ".txt" file(with a strange name) from the downloaded archive to sdcard.
P.S. I say that not all flash drives can operate restore, I have like three went, normally only one.
3) Insert the micro SD into the phone and pull out the battery.
4) Hold down the Volume (+) and power up, hold and connect the phone via cable to your PC, your phone will be switched on and the logo appear, then turned off my phone (missing logo). So, when the logo will disappear (ie the phone will turn off) and immediately hold down the volume (-) the volume (+) and power up.Main that the updating process can start only one time after the logo was gone, if after a few times in a row press both the volume keys and power up, updating does not start, it is necessary to re-clamp the volume (+) and the power up, after the disappearance of the logo, both the volume and the power up of ... I have to go to the upgrade process if you wrote "Update failed!", try again (I went with 2 times).
5) After a successful update, the phone will reboot, on reboot he should loaded the standard blue recovery.
6) Turn off the phone from the computer, insert the battery, hold down the volume (-) the volume (+) and turn on, wait until you get a pink screen, release the button and connect it to your computer. You should see a new device and to define a disk drive with a folder "image". If we define - rejoice!) If not, then you need to install the driver on the internet enough to the driver, as well as the wood in my going to the Android SDK, not sure ...
7) Thus, we can assume the phone repaired) Download recovery 4.0.0.5 and unpack the archive and copy the file "recovery.img" to a folder "image" with the replacement. A man does not 4.0.0.5 recovery loaded, it is strange, but recovery 5.0.2.7 normally loaded
8.) Disconnect the phone from the computer, pull out / insert the battery and try to enter the recovery (volume (+) and power up).
9) If set, then everything is OK and can now be sewing. I still put 2.2 Geno v8.4 + software package from Google, but I recommend again read all instructions on the firmware, to avoid problems!
Good luck, hope that helped someone, he sat on the forums more than one day, but have not found a solution.
If someone has turned out, a sign of gratitude you can throw money on my phone +375297176005 (MTS, Belarus), would be very grateful
P.S.
Instructions is my and it's my first, that do not copy and paste, you can search the Internet. Do not judge strictly, if something is not designed ...
If there are people who helped, I think you can throw his hat in the description. My message is also present in our 4pda.
Hope springs eternal
Sorry for my english, I'm from Belarus and bad know it

Before the restoration, can you open your phone? Mine was completly down. I can't power on or go to recovery or install any official roms.

Özgürce said:
Before the restoration, can you open your phone? Mine was completly down. I can't power on or go to recovery or install any official roms.
Click to expand...
Click to collapse
my phone is also not included, only in
a pink boot screen, but on the computer the drive was
not detected

Please, if someone came to restore, write

greeshan said:
Please, if someone came to restore, write
Click to expand...
Click to collapse
omg, this looks so sad, I guess we are in the same page. BRICK phone. no power, no screen no nothing... well, actually no, it vibrates when battery is inserted or cable is connected, but, other than that, niente.

I had follow all ur instruction but when i press volume up + power with usb connected it goes to the CWM...so i just press vol up + down + power...It goes PINK SCREEN...Any more solution please?

i did it! but after 5 times i see this message: "update failed"

i have the same problem

r0y123 said:
i have the same problem
Click to expand...
Click to collapse
Hello, I have a problem after changing recovery.img. Now after power on only error message: Image signature verify fail. Your boot/recovery image may have an incorrect signature. Please update your image to a signature official one. You can remove battery for power down.
When I get to pink screen - no disk appears in my PC. Please, what can I do now?

greeshan said:
Please, if someone came to restore, write
Click to expand...
Click to collapse
My update process stops at 1/4 of the bar.What can i do?

greeshan said:
my phone is also not included, only in
a pink boot screen, but on the computer the drive was
not detected
Click to expand...
Click to collapse
Just thought I would mention it, if you connect the pink screen to Ubuntu/Linux, it will most likely mount.

Just tried this recovery method on a bricked U8800. Didn't do anything at all. Must admit that it was bricked in a way that i didn't see anything at all on the screen. Neither did i notice anything in dmesg on a linux machine.

Help
Hello.my huawei u8800pro v.2.3.5 brick after install official ice cream sandwich.I followed the procedure and now I have a new removable but I can't go to recovery mode!!can I install a new rom?