Database Users

Help.. I can't turn on my htc

I installed Miri Topaz Keyboard from http://blog.celogeek.com/mobile/mob.../#cg_880601ece8119b663a92f2a39784b881cc20f2b2
And after installation phone request me to phone reset, i clicked OK and than i saw text "smart mobility" with some numberl which look like IP, but i think that was a version number (u know numbers were red). When blackstone should show logo windows, it shown black screen. After reset, and after put out and put in battery, SIM card and memory stick it is showing this same. Please Help.
It looks as if windows mobile is broken, but why? I just installed keyboard. Please help again ;/
WM 6.5 Miri Manila 2.5 v.13

Domin1992 said:
I installed Miri Topaz Keyboard from http://blog.celogeek.com/mobile/mob.../#cg_880601ece8119b663a92f2a39784b881cc20f2b2
And after installation phone request me to phone reset, i clicked OK and than i saw text "smart mobility" with some numberl which look like IP, but i think that was a version number (u know numbers were red). When blackstone should show logo windows, it shown black screen. After reset, and after put out and put in battery, SIM card and memory stick it is showing this same. Please Help.
It looks as if windows mobile is broken, but why? I just installed keyboard. Please help again ;/
WM 6.5 Miri Manila 2.5 v.13
Click to expand...
Click to collapse
Hi Domin1992,
as stated above, you have mentioned that you performed a reset - was this a soft reset only with your stylus?
If you are unable to power on your phone at all, then there may be a possibility that you have a hardware issue (could be a problem with the motherboard circuit or battery).
How do you charge your phone? Via the mains adapter, or the USB link?
Try connecting your phone via your external power source using your mains charger or via USB cable and leave it for 2-3 hours and see if it picks up. (also look on device for indication of it receiving power by the lit LED).
If you have a charged battery insert it and power on the phone. If your phone doesn't have a hardware damage it should start. If it powers on (with the phone powered on, regardless of what's been displayed), then try performing a hard reset - especially if you cannot load the Manilla interface then i think you should try doing this. Also note that by performing a hard reset, you will lose all data stored in your phones RAM (this excludes data stored on your MicroSD card)
Regards.

After installation, device was doing reset after I clicked OK when device request me to do it.
When my device didn't want to load windows logo, I take out battery (device don't working without battery during is pluging to external power source) and I used stylus to reset.
I used to charge my device via mains adapter. You know it is USB link plugged to small box which is going to socket.
Today morning I pluged my device to external power source, and want to power on. After 10 minutes there is text.
"The device is unable to boot because either you have tourned off the device incorrectly or tried to install an application from untrusted source. Press Volume Up to rest your device or press your other button to cancel. This operation will delete all your personal data and restore the device to it's factory default settings."
Ok thats great, but i try to press Volume Up and I haven't reaction.
No one button isn't working.
I have to press this button once, 5sec or 10sec?

This is a hard reset. You should pres the button just once.
You should tell us if you can enter the bootloader,you used HSPL or USPL, this way someone could help you.
My opinion is that you should flash again using the card method.But for this to work you should have the HSPL and be able to enter bootloader.
So some more info would be good.
Good luck.

OK..
I have HSPL.
I downloaded bootloader from http://forum.xda-developers.com/showthread.php?t=347700
I set all what I should and press ok and than I see "USB port can not open".
I can't find card method for blackstone.

Ok.
It is simple enough.Just folow the next steps:
1. Download a rom that you like.
2. Rename the .nbh file to BLACIMG.nbh.
3. Copy BLACIMG.NBH into the root dir of your Storage Card.
4. Be sure to have at least 30% of charge.
5. Turn off your device by using the Power Button
6. Go to bootloader mode. Push and hold Vol Down + press Power button.
7. As soon as presented the message, push Power button to start flashing or Volume Down button to cancel.
8. The whole procedure will take about 3 minutes. After you finish and see the relative message, soft reset your device, you are ready.
Good luck and keep us posted.

Now I have problem with bootloader mode. I put in micro sd, turn on bootloader mode (poweron with volume down) and than in device I have
"Black100 32M
SPL-1.56.oliNex
MicroP-BlackStone (LED) v6"
on red-green-blue-white background
And for half second device show
"Loading!
No Image file"
Whats wrong?

2 Things:
1) Make sure you called the file BLACIMG
2) Make sure you place the file in the root of your SD card, not a folder.

Everything I did, how you told me. It isn't working still.

OK.. Thank you very much.
My device is working now.
I cant belive i just put in SIM card
And restore device to factory default settings.
Thank you a lot.

Domin1992 said:
OK.. Thank you very much.
My device is working now.
I cant belive i just put in SIM card
And restore device to factory default settings.
Thank you a lot.
Click to expand...
Click to collapse
Excellent

Domin1992 said:
OK.. Thank you very much.
My device is working now.
I cant belive i just put in SIM card
And restore device to factory default settings.
Thank you a lot.
Click to expand...
Click to collapse
You are welcome. Glad that all is good.

My Phone Can't Load Windows

My HTC Touch2 is when the power on, show the hTc logo and R, G, D 3line only show and stop at there. No respond and can't go forward. so pls advice me for how to do?
PS. no warranty becos of buy 2nd hand from online.

supercoolcupid said:
My HTC Touch2 is when the power on, show the hTc logo and R, G, D 3line only show and stop at there. No respond and can't go forward. so pls advice me for how to do?
PS. no warranty becos of buy 2nd hand from online.
Click to expand...
Click to collapse
remove mem card and make a hard reset hold both volumes and turn on the phone, when u ppl write dat ur phone is dead can u b so kind explaining why if u no or wot happened just before that great event

The device is unable to boot because either you have turned off the device incorectly or tried to install an application from untrusted source. Press SEND to reset your device or press any other button to cancel. This operation will delete all your presonal data and restore the device to its factory default settings.
Click to expand...
Click to collapse
message are appears but when i press the SEND button, nothing happen and message are sill appears and no responds.
i'm install iphone themes and s2u2 software. after turn off and restart this problems are happen.

now hard reset to my phone and restore factory default, all of my data on phone memory are gone but i get back to my windows purely.
thanks you whyayeman for your advice.

supercoolcupid said:
now hard reset to my phone and restore factory default, all of my data on phone memory are gone but i get back to my windows purely.
thanks you whyayeman for your advice.
Click to expand...
Click to collapse
alreet actually you had no choice to save the data at least ull be more careful next time , find and instal "spb backup" program , do the buckups at least once a fortnight ,even if u do a hard reset u can get ur data back easily, its self executing file (exe) cheerz

Magic stuck in boot loop! HELP!!

I have a rooted Rogers magic and dont know what happend...but its stuck in a boot loop. All it gets to is the "HTC MAGIC" screen and then the out of box image shows up and then it restarts and does this again and again.
I cant enter recovery or fastboot. ive tried the diff key combinations to boot but nothin works.
ANy help!!???

If you can't get into a recovery, or fastboot from my understandings you now have a very expensive paper weight.

Mine did the same, randomly or because i pressed some combination the phone booted again. Sometimes pressing backspace i enter the menu, pressing home+power... nothing.
One or two times pressing home+power enters the menu and then reboots by itself.
Any ideas?

It's happened to me once.
Does anything come up with your computer?
Can you access adb?
Try removing the battery then hold down the menu button.
While still holding menu put the battery back in.
The phone should start up. Keep holding the menu button until you are blue in the face (or for about 30 seconds or so) or until the phone boots.
If that doesn't work try the back button instead of the menu button like above.
If THAT doesn't work... then find a stack of papers and place them in front of a fan. Place your phone onto the stack of papers and let it sit...
Or try calling your provider because you might still be under warranty.

ok guys it on now.
Its working but for some reason it wont read my sd card :S
turns out my bro flashed a recovery he shouldnt hav so it kept rebootin evenwhen i tried entering recovery. i erased it thinkin that ill flash a new recovery...but it wont recognize my sd card. ive tried 3 diff cards...but nothin works.
even in the rom, i get the notification: "SD Card has been removed. Insert a new SD card to increase your device storage."
i cant get the card to work HELP??
........how do i even flash anything without the card?

You can flash through fastboot
Sent from my Epic myTouch 3G using XDA app.

Flash through fastboot like he said and it should read your SD card with a new ROM.

any links to a tutorial on how to flash through fastboot??
thanks in advance!!!

hassan3216 said:
any links to a tutorial on how to flash through fastboot??
thanks in advance!!!
Click to expand...
Click to collapse
Nope. There are no links or tutorials at all anywhere on the web. They do not exist. Except for maybe this one:
http://forum.xda-developers.com/showpost.php?p=4066552&postcount=2
... and about 5,539 more. But yeah... other than those... the answer is no.

The Sapphire Wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Sapphire_Hacking
Click to expand...
Click to collapse
is also somewhere you should look if you need help rooting.

please help can i recover my magic stuck in box image shows up
without jtag ?
helppppppppppppp

NIRANIK said:
please help can i recover my magic stuck in box image shows up
without jtag ?
helppppppppppppp
Click to expand...
Click to collapse
It you have bootloop - remove battery you turn phone off. Wait a few minutes and place battery back.
Then try flash turn phone on by pressing and holding Back + Power (fastboot-mode)
Write first five rows here (all symbols are important).
It you will have problems, try to load phone into other modes:
Home + Power - recovery-mode
VolumeDown + Power - hboot-mode
Sent from my A7-040 using Tapatalk

no way out
I tried but nothing happend
just a screen with box and yello arrow refers to a mobile
any way thank you sir

NIRANIK said:
I tried but nothing happend
just a screen with box and yello arrow refers to a mobile
any way thank you sir
Click to expand...
Click to collapse
Can you load phone into any mode?
Sent from my NookColor using Tapatalk

first thank you for your time
no I can not enter any mode no fast-boot no recovery -- only the power bottom can be recognized

NIRANIK said:
no I can not enter any mode no fast-boot no recovery -- only the power bottom can be recognized
Click to expand...
Click to collapse
Too bad
It seems like phone flashed by faulty hboot or radio (uncompleted download or something else)
Try disconnect phone from pc or adapter and remove battery for 10-15 minutes
May be it cancels this process.
To restore phone you need to run hboot-mode or fastboot-mode - if you don't then only JTAG can help

[Q] 7720 RTM updateable ROM issues

I just got done going through the proccess of installing the updateable ROM from XBmod and YukiXDA can continue to have issues with the buttons.
The "Readme" file says the button layout should be the same as on all the other ROMS with the green button being the camera button. So far with using both versions of the ROM they provided I have had no luck. The green button doesn't do anything but activate voice dialing when held down for a second.
Can anyone help me please?

You have a soft button in camera, why do you need a hard button ...it can sometimes unnecessarily get switched on in pocket
Sent from my Schubert using XDA Windows Phone 7 App

Yeah see that. I was hoping for the hard button. Oh well, Thanks, I think the fact that it was 2:30am (hour # 20 of my day) I just wasn't paying attention.

I did have one other big problem. Once I updated to 7720, the phone would continuously reboot itself. It wasn't just a shutdown and restart, it would revert back to it's initial bootup settings. I wouldn't have to set up the phone but it would wipe any changes that I made to it (ie: apps downloaded, apps pinned to the start screen, etc...).
I followed the steps as to a "T", has anyone else had this problem or is there possibly something I can do to fix it?

download cab file from here http://xboxmod.sylvester20007.com/cabs/keymapping/
in first txt file you have layout so pick one that you like and update
it worked for me

IM4CHRIST said:
I did have one other big problem. Once I updated to 7720, the phone would continuously reboot itself. It wasn't just a shutdown and restart, it would revert back to it's initial bootup settings. I wouldn't have to set up the phone but it would wipe any changes that I made to it (ie: apps downloaded, apps pinned to the start screen, etc...).
I followed the steps as to a "T", has anyone else had this problem or is there possibly something I can do to fix it?
Click to expand...
Click to collapse
try to do hard reset
Hard reset:
During boot, when "1234" appears on screen, press and hold VolUp + VolDown,
until the message appears. Press VolDown twice to clear data.

[Q] Stuck on System recovery (which doesn't work))

Hello to all of you!
My Tattoo has gone crazy lately...he deleted all my contacts, pictures and reset the settings...all when I switched it off and then turned it on. Ok I survived...
But yesterday when I turned my Tattoo on...he was stuck on the Tattoo screen and it was restarting itself on and on again...with no luck...then I pressed the buttons for hard reset, then the picture of the yellow exclamation mark appeared, and now I'm stuck with this Android System Recovery-which it's not working, I can't select anything, none of the buttons works...What Can I DO???? I have never made no changes to my tattoo, so it's not rooted or anything.
the system recovery says:
Android System Recovery
Use trackball to highlight;
click to select.
reboot system now [Home+back]
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
___________________
E:Can't open /cache/recovery/command
Could someone tell me what to do now...please

Please someone?? I really don't know what to do!! I need my phone! PLEASE

Try downloading stock ROM from here http://htcpedia.com/official_rom_htc_wwe_for_htc_click_tatoo/soft/htc-tattoo-rom/download.html
Then try installing this ROM from Windows...I thing that you need to have htc sync also...

Thank you for helping me, I really appreciate it.
But that's the problem, my pc won't recognize the phone, I have installed the htc sync but when I insert the phone from usb nothing happens. and i can't go into the phone to check if usb debug is on or off. I also tried with adb but it says device not found....so I think there's nothing I can do...

Leegirl said:
reboot system now [Home+back]
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
Click to expand...
Click to collapse
Can you see some of these options? Did you try to download some of custom ROM and rename it to update.zip and then put it in root of sdcard and apply it? Im little confused with this....

Yes I see all of these options, but the problem is I can't select them or anything because none of te buttons work! I tried to put the ROM on the root of the sd card, but it make no sense because I cant select the option apply update.

Try Power+Home button (that is for recovery menu, but if your tattoo isnt rooted you should see only triangle with exclamation sign inside), then plug usb cable and then try installing stock ROM from post above...

With power+home button I see the recovery menu...it's just that nothing work in the recovery menu. I tried plugging the usb...the PC won't recognize it.
I told you I tried everything... I guess it's a hopless case

What about this?
To reset the phone using phone buttons
1. With the phone turned off, press and hold the HOME and BACK buttons, and then briefly press the END CALL/POWER button.
2. Press the ENTER button to begin the reset process.
Tip If your phone hangs or freezes, remove the battery then wait for a few seconds, and then re-install it. After re-installing the battery, turn on the phone.
This one is the same but has a pic of tattoo...
http://www.howtoreset.com/HTC_Units/HTC_Tattoo_Hard_Reset_Soft_Reset.html

ha...this was my first try...unsuccsessful...it's like he can't do nothing else-just showing the triangle with exclamation mark and if I press home and power goes into recovery which doesn't work....that's all he can do..

F*uck i'm all out of ideas...

Yeah...don't tell me...

Leegirl said:
Thank you for helping me, I really appreciate it.
But that's the problem, my pc won't recognize the phone, I have installed the htc sync but when I insert the phone from usb nothing happens. and i can't go into the phone to check if usb debug is on or off. I also tried with adb but it says device not found....so I think there's nothing I can do...
Click to expand...
Click to collapse
Here is what you can do:
After you started RUU wait until you get the prompt to proceed or until you get the usb error and don't close the application
Go to temp folder to get the rom.zip file
to go to temp folder type %TEMP% in the run command bar
copy the rom.zip to your favourite place and rename it to CLICIMG.zip
Now you can close the RUU install
place CLICIMG.zip in root of memory CARD and turnoff your phone
Boot in to HBOOT mode (power button + volume down keys)
wait for few seconds and install would start
I hope you have a memory card reader to place the file in to it
key for this to work is, you need to have right Tattoo RUU to get ROM.zip or have a goldcard to work any Tattoo RUU derived ROM.zip

True, i forgot about that

Thank you fo helping me. I tried but it doesn't work. The volume keys won't work...

can you check if you could boot to fastboot mode (hold both power button and back button)
From there you can
either reset your phone (menu button)
reboot to HBOOT (action button - centre button)
change to HBOOT (volume down button) - l know it doesn't work for you
or turn off the phone (left button)
If none of the buttons work, then you might need to send your phone to the doctor

Nope...it doesn't work....not to the doctor i will send the phone to the trash...