[Q] Stuck in Clean Boot - Help! - neoTouch S200 General

Hi, I was in the middle of Flashing my Acer Neotouch S200 when the usb got knocked out. I now cannot get back into bootloader mode at all. I try to do this by holding the camera, volume and power buttons while holding down the reset button.
I simply go into the clean boot screen where it is stuck. Please, please help! Is there anything that will let me flash it again?
One other thing, if an microSD card is inserted into the slot and I try to get it into bootloader mode, the blue led turns on then the red led flashes twice every 5 seconds. Is that normal because it did it before the flashing process was interrupted but when I took the microSD card out the PC would recognize it to be in bootloader mode.
I tried looking on other posts but nothing worked
Problem Solved!I managed to get it into bootloader mode by pressing volume down, camera and power buttons while holding down reset rather than having both volume buttons.

did you do backup?

please i need an English rom to install in my s200 neo touch acer. my acer s200 is stuck in clean boot, i was able to get to bootloader and my acer usb port was installed on my pc, now i need to flash and installed a new rom but i dont have a rom and dont know how to installed it. please helpppppppppppppp. my acer rom is s200_2.003.00_IT but i want an english rom as this one is in italy. Thanks

owltop420 said:
Hi, I was in the middle of Flashing my Acer Neotouch S200 when the usb got knocked out. I now cannot get back into bootloader mode at all. I try to do this by holding the camera, volume and power buttons while holding down the reset button.
I simply go into the clean boot screen where it is stuck. Please, please help! Is there anything that will let me flash it again?
One other thing, if an microSD card is inserted into the slot and I try to get it into bootloader mode, the blue led turns on then the red led flashes twice every 5 seconds. Is that normal because it did it before the flashing process was interrupted but when I took the microSD card out the PC would recognize it to be in bootloader mode.
I tried looking on other posts but nothing worked
Problem Solved!I managed to get it into bootloader mode by pressing volume down, camera and power buttons while holding down reset rather than having both volume buttons.
Click to expand...
Click to collapse
You Done Good Thing for Correct Bootloader Mode Instruction. . .
Thanks For Share Buddy!
Now You Can Search in google this >>> OS_ACER_2.003.00.EN_WM65_neoTouch
and Install ENGLISH ROM!
Good Luck!

Related

Magldr 1.12 instalation problem

Hello,
I wanted to ask if someone clashed with problem like that and knows how to solve it. I had 1.66 rom eastern euope and installed 2.08hspl, tried to install latest magldr and I am guessing problem occured because I didnt installed latest radio. Now when I am turning on the phone it shows white screen and green logo and stuck. Tried turning of the phone and holding - volume button when turning on that didnt make any difference can someone help me to revive my phone ?
So you tried to get into bootloader, but the thing is you have to try harder.
Bootloader should work just fine.
So again, turn of your phone. while the phone is turned off, keep the vol down, and press the power button.Release the power button, but keep the vol down pressed.
You can try the other way: hold the vol down pressed and reset the phone(red button on the back).
If you want to use the SD card method to flash something you still have to enter the bootloader, so you must keep trying.
Forgot to ask: did you manage to enter the bootloader or not, cause you only said it did not make any difference????.What does that mean?
I already trying to enter bootloader for the five hours, so I guess it's impossible, also tried that thing with red button it didnt load up that bootloader screen. The thing is that holding volume key down didn't work for me before to get into bootloader even when the phone was ok but it did install all roms which I tried so I didnt think that this would be problem either apparantely it is... Maybe youu have some other suggestions how to fix it ?
If you can make the pc recognize the HD2 then you can flash anything.
But i think that this is only possible in bootloader or windows or android.
So this is a problem.
No ideea for now.
Anyone help???
But you *do* push both vol. down and power buttons and keep them pushed until the screen turns on, don´t you?
I didn´t get into the bootloader as long as I didn´t kept both buttons pushed long enough... had to learn the "timing" kind of...

[Q] flashing hd2 with win 7

Hey guys,
So I've decided to flash my mates hd 2 with win 7.
i downloaded the rom from the forum which has the loader (i think).
i watched the video demo on youtube and followed the instructions there.
when I boot up the phone after rom updater, I can't get into the bootloader! all I can see is htc logo and nothing happens.
What do i do? Have I bricked the phone?
Please help!
emclondon said:
Hey guys,
So I've decided to flash my mates hd 2 with win 7.
i downloaded the rom from the forum which has the loader (i think).
i watched the video demo on youtube and followed the instructions there.
when I boot up the phone after rom updater, I can't get into the bootloader! all I can see is htc logo and nothing happens.
What do i do? Have I bricked the phone?
Please help!
Click to expand...
Click to collapse
With the phone turned off, hold the volume down button on the side of the phone and press the power button. Keep holding the volume down button until you see the tri-colored screen (this is bootloader).
at this point i would suggest you flash task29, enter tri-colored screen again (bootloader), then flash magldr v.1.12, then let the phone boot into magldr, choose option 5 and flash wp7.
Hi,
I cannot get into the tri-colored screen now! thats my problem. I updated HSPL to *.HSPL, and tried updating the rom and this happens!
I have tried the reset method by holding Vol + and - keys with Power button, but that doent help too
how do i used task29 when i cant get past the HTC logo on the phone?
emclondon said:
Hi,
I cannot get into the tri-colored screen now! thats my problem. I updated HSPL to *.HSPL, and tried updating the rom and this happens!
I have tried the reset method by holding Vol + and - keys with Power button, but that doent help too
how do i used task29 when i cant get past the HTC logo on the phone?
Click to expand...
Click to collapse
try soft reset. remove the back cover then press a blunt pointed object such as a pen or stylus into the reset button to the bottom left of the SIM, near sd slot, and release. The phone will then reboot. try to get into bootloader as soon as it restarts
hi, i tried installing the rom again, and i get some cpp error?
dont know why.
i tried reverting back to stock rom, installed it successfully, and now when I unplugged the mobile, it turns off. when i plug it in it turns back on and it loops at HTC logo i mean, I turns itself off and turns itself on.
why do you think this happens?
Hi,
The problem is When I plug in my phone to USB, it boots up shows a HTC logo, with
R 2.06.51.07
G 15.30.50.07 U
D 1.66.76641
written in red on left corner and holds on for a few seconds and turns off, and turns on itself.
end note: the phone only starts when I plug it to USB, else its a brick

Non responsive fastboot and power button!!

Ok so, I was going to flash CM 9 v1 on my device, and when i was in clockworkmod recovery I noticed that the power button wasn't working at all.
I took out the battery and put it back and then it reboot itself and got stuck on the unlocked padlock screen.
Then i managed to boot it by pressing vol up and down at the same time and putting the battery in when plugged on the computer with the usb cable. This is the only way i can boot it. And after it runs a while it crashes and reboot into the unlocked padlock again. And this over and over.
Then I tried to go to recovery to reflash with the soft sensitive buttons and the fastboot screen doesn't do anything at all. If I press vol up or down to move around it gets stuck.
Got it to work a while and reverted back to stock rom with rom manager to see if fastboot worked again but nothing happened.
I need help to fix this.
I try to go to download mode but it doesn't work either. ADB works tho
Any suggestion??
(sorry fot the bad english)
i actually had the exact same issue a few weeks ago
it was an issue with the power button itself since i got everything back to stock and the power button still wasnt working properly
i had to send it to samsung repair center
they fixed it for free and it turns out the issue was indeed the power button
thank you for your answer!
i will send it to samsung!

[Q] How can I get into fastboot mode without volume key?

Hello guys, I'm new here and I hope you can help me out.
Let me make the story short.
My phone's screen broke and I replaced.
In that processes I lost the rubber that stick
to the panel of the volume. I was fine with that since my phone
in vibrate mode and I really don't use ring tone in my daily basis.
I tried to download Android 5.0 lollipop and flash it.
How did I get there? well since I did not have a volume button,
I downloaded an app that restarted my phone and got me into
fastboot mode without the key (I did got me where I wanted).
Then the problem was that in the middle of writing the .img
the freaking cheap bastard micro usb unplugged!!!
BAMM!! phone now is bricked, I cannot get into recovery/fastboot mode
since I cannot press the volume key and my phone is bricked.
I tried going through fastboot mode via my computer again,
but the computer doesn't recognize the device since it still
looping there forever at the google logo. I try installing USB
DRIVERS to see if I could do some "magic" haha. Got
error "This device cannot start ..." And still at the same problem.
I know I can get back to my recovery if order the part for the volume
key, I ordered the part to replace it, but trust me I was 3 weeks without
my phone and now this problem
Is there any way that I can get to fastboot mode to factory reset my phone
without volume key with a bricked forever looping a "google" logo ? :fingers-crossed: :fingers-crossed:
I appreciate any help.
vadeld said:
Hello guys, I'm new here and I hope you can help me out.
Let me make the story short.
My phone's screen broke and I replaced.
In that processes I lost the rubber that stick
to the panel of the volume. I was fine with that since my phone
in vibrate mode and I really don't use ring tone in my daily basis.
I tried to download Android 5.0 lollipop and flash it.
How did I get there? well since I did not have a volume button,
I downloaded an app that restarted my phone and got me into
fastboot mode without the key (I did got me where I wanted).
Then the problem was that in the middle of writing the .img
the freaking cheap bastard micro usb unplugged!!!
BAMM!! phone now is bricked, I cannot get into recovery/fastboot mode
since I cannot press the volume key and my phone is bricked.
I tried going through fastboot mode via my computer again,
but the computer doesn't recognize the device since it still
looping there forever at the google logo. I try installing USB
DRIVERS to see if I could do some "magic" haha. Got
error "This device cannot start ..." And still at the same problem.
I know I can get back to my recovery if order the part for the volume
key, I ordered the part to replace it, but trust me I was 3 weeks without
my phone and now this problem
Is there any way that I can get to fastboot mode to factory reset my phone
without volume key with a bricked forever looping a "google" logo ? :fingers-crossed: :fingers-crossed:
I appreciate any help.
Click to expand...
Click to collapse
Im not sure why your text is like this? But paraphrasing buddy comes a long way
Just hold the power button, until it dies, or just let it die in general since your volume button (You only need Vol down and Power) to power it off completely. Since your Volume keys are gone, the best solution is to wait for the replacement before doing so, unless you can get the contact keys to trigger the Volume button, you're in a loss atm. No OS or Volume keys means you can't trigger ADB commands or boot into fastboot. Just wait it out I guess?

A20e stuck in download mode

Hi,
I have a new a20e (a202f) out of the box.
I followed another guide to root and install twrp which turns out was wrong. I unlocked the bootloader just fine.
I have no backup, no personal boot.img or anything.
Essentially I am stuck in download mode and restarting takes me straight back to download mode.
Recovery: Error validating footer.
SW REV. CHECK FAIL (BOOTLOADER) DEVICE"
Cheers guys
What guide did you follow? You have to download your stock fw from sites like sammobile then from there you can have the boot.img and etc. Have you tried flashing stock fw using odin?
Note: Usually you flash vbmeta for footer error when you flash twrp.
Deluriane said:
What guide did you follow? Have you tried flashing stock fw using odin?
Note: Usually you flash vbmeta for footer error when you flash twrp.
Click to expand...
Click to collapse
It was a guide on 'unofficialtwrp.com' - I can't link things here yet.
I have since tar'ed an unpatched twrp (TWRP-3.3.1.0_A20_by_Agrim720.img) + vbmeta.img + boot.img (from https://forum.xda-developers.com/galaxy-a20/help/boo-img-a205fxxu2asfb-t4008739), then I flashed through AP on Odin and now I think it boots past the download mode but instead it now has fuzzy dark red screen with nothing legible.
Oh bugger, I've been a class A plum.
Can I get out of this horrible mess?
craigywaigy said:
It was a guide on 'unofficialtwrp.com' - I can't link things here yet.
I have since tar'ed an unpatched twrp (TWRP-3.3.1.0_A20_by_Agrim720.img) + vbmeta.img + boot.img (from https://forum.xda-developers.com/galaxy-a20/help/boo-img-a205fxxu2asfb-t4008739), then I flashed through AP on Odin and now I think it boots past the download mode but instead it now has fuzzy dark red screen with nothing legible.
Oh bugger, I've been a class A plum.
Can I get out of this horrible mess?
Click to expand...
Click to collapse
Well you have to use your own boot.img from your fw, not all of use the same fw that's why, some are still on u2, u3 and u4. Maybe the boot.img you got isnt the same as your fw.
Well you can start from scratch and reflash your stock fw in odin.
https://www.sammobile.com/firmwares/
Deluriane said:
Well you have to use your own boot.img from your fw, not all of use the same fw that's why, some are still on u2, u3 and u4. Maybe the boot.img you got isnt the same as your fw.
Well you can start from scratch and reflash your stock fw in odin.
Click to expand...
Click to collapse
Yep, but now I can not get back to download mode. Any pointers?
craigywaigy said:
Yep, but now I can not get back to download mode. Any pointers?
Click to expand...
Click to collapse
Try holding volume - and power and your phone will turn off, as soon as it turns off press volume + & - and plug your usb cable that is connected to a computer.
No luck with that. It displays the message about running custom os etc and to press power to continue. So I press it and it boots to the messed up red/pink/black display.
craigywaigy said:
No luck with that. It displays the message about running custom os etc and to press power to continue. So I press it and it boots to the messed up red/pink/black display.
Click to expand...
Click to collapse
Do you mean like the one attached? If yes you havent booted to download mode.
Try booting to recovery by holding volume + and power while you turn on the phone.
There is a option there to boot to download mode.
Deluriane said:
Do you mean like the one attached? If yes you havent booted to download mode.
Try booting to recovery by holding volume + and power while you turn on the phone.
There is a option there to boot to download mode.
Click to expand...
Click to collapse
Yes that screen. I've tried your suggestion with volume + but that also ends up with messed up screen
Yes so currently I'm unable to get to recovery (not sure it even flashed properly), unable to get to download mode, or to get the device recognised in odin.
I'm unable to power off. The screen is blank and when I press power it flickers shortly with some black/white/red pink colours around the edges, but the screen quickly turns blank.
From this position I can only restart by holding volume - and power.
This boots to the samsung logo and then the 'bootloader unlocked' warning. No amount of button configs have proved successful so far, and then I end up back at the blank screen.
I'm happy to start from scratch. I have downloaded the stock firmware but I'm simply unable to proceed.
Aslo the device is not recognised in windows at any point.
Thanks guys
craigywaigy said:
Yes so currently I'm unable to get to recovery (not sure it even flashed properly), unable to get to download mode, or to get the device recognised in odin.
I'm unable to power off. The screen is blank and when I press power it flickers shortly with some black/white/red pink colours around the edges, but the screen quickly turns blank.
From this position I can only restart by holding volume - and power.
This boots to the samsung logo and then the 'bootloader unlocked' warning. No amount of button configs have proved successful so far, and then I end up back at the blank screen.
I'm happy to start from scratch. I have downloaded the stock firmware but I'm simply unable to proceed.
Aslo the device is not recognised in windows at any point.
Thanks guys
Click to expand...
Click to collapse
Are you sure you pressed and hold volume +&- and plugging cable before the samsung logo pops up? You have to do it quickly right after the device turns off. You shoudn't see the bootloader warning if you done this quickly and correctly.
craigywaigy said:
Yes so currently I'm unable to get to recovery (not sure it even flashed properly), unable to get to download mode, or to get the device recognised in odin.
I'm unable to power off. The screen is blank and when I press power it flickers shortly with some black/white/red pink colours around the edges, but the screen quickly turns blank.
From this position I can only restart by holding volume - and power.
This boots to the samsung logo and then the 'bootloader unlocked' warning. No amount of button configs have proved successful so far, and then I end up back at the blank screen.
I'm happy to start from scratch. I have downloaded the stock firmware but I'm simply unable to proceed.
Aslo the device is not recognised in windows at any point.
Thanks guys
Click to expand...
Click to collapse
Hello -
Please trust me when I tell you that it can be fixed. I had the EXACT same problem and drove me crazy for 24 hours. You can deffinetly fix your phone once you get to download mode.
I had the same issue where I could not turn the phone OFF it just looped back and I pushed buttons for hours to no avail... Then some one told me it WILL WORK, it is just the timing of
the button pushing, AND the USB cable plug in. Sure enough he was right. It took me alot of tries and I even took my phone apart and un plugged the battery so I could controll the power
ON / OFF better and time the button's easier. Here is what I did ...
unplug battery so phone was 100% OFF.
Plug in battery ( phone is still OFF )
Hold Vol - then Hold Power and Vol -
As soon as the power started IMEDITALY PLUG IN USB ( have USB READY to be plugged in FAST )
DONT let go of buttons ... screen will flash quickly and then Imediatly let go of power keep holding Vol -
IF you timed this right, IT WILL proced to download mode. If not, then start over again from power OFF ( step 01 )
It took me 3 tries to get it ( after 50+ tries before ) lol
Now I am not sure about the battery unplugging ... maybe you dont need to, but it mad it work for me as I could control the power ON part of this now.
Getting to your battery is not very hard and there is a you tube video on how to do it... if you need help just PM ME.
Good luck friend.
When this happened to me all I did was hold volume up and volume down. Kept cord connected to computer. Connected to device during the bootloop and boom within seconds I was in download mode. It catches it once screen goes off in between the bootloop.
Sent from my SM-N950U using Tapatalk
Thanks you guys. In the end the battery died and then I could power up whilst holding vol+, straight to recovery and then I could flash stock rom.
Much appreciation for your help guys, it got me out of a pinch - it is my mother-in-law's new phone!
craigywaigy said:
Hi,
I have a new a20e (a202f) out of the box.
I followed another guide to root and install twrp which turns out was wrong. I unlocked the bootloader just fine.
I have no backup, no personal boot.img or anything.
Essentially I am stuck in download mode and restarting takes me straight back to download mode.
Recovery: Error validating footer.
SW REV. CHECK FAIL (BOOTLOADER) DEVICE"
Cheers guys
Click to expand...
Click to collapse
can you help me i have the same problem idk how to fix it help

Categories

Resources