Hello guys, I'm new here and I hope you can help me out.
Let me make the story short.
My phone's screen broke and I replaced.
In that processes I lost the rubber that stick
to the panel of the volume. I was fine with that since my phone
in vibrate mode and I really don't use ring tone in my daily basis.
I tried to download Android 5.0 lollipop and flash it.
How did I get there? well since I did not have a volume button,
I downloaded an app that restarted my phone and got me into
fastboot mode without the key (I did got me where I wanted).
Then the problem was that in the middle of writing the .img
the freaking cheap bastard micro usb unplugged!!!
BAMM!! phone now is bricked, I cannot get into recovery/fastboot mode
since I cannot press the volume key and my phone is bricked.
I tried going through fastboot mode via my computer again,
but the computer doesn't recognize the device since it still
looping there forever at the google logo. I try installing USB
DRIVERS to see if I could do some "magic" haha. Got
error "This device cannot start ..." And still at the same problem.
I know I can get back to my recovery if order the part for the volume
key, I ordered the part to replace it, but trust me I was 3 weeks without
my phone and now this problem
Is there any way that I can get to fastboot mode to factory reset my phone
without volume key with a bricked forever looping a "google" logo ? :fingers-crossed: :fingers-crossed:
I appreciate any help.
vadeld said:
Hello guys, I'm new here and I hope you can help me out.
Let me make the story short.
My phone's screen broke and I replaced.
In that processes I lost the rubber that stick
to the panel of the volume. I was fine with that since my phone
in vibrate mode and I really don't use ring tone in my daily basis.
I tried to download Android 5.0 lollipop and flash it.
How did I get there? well since I did not have a volume button,
I downloaded an app that restarted my phone and got me into
fastboot mode without the key (I did got me where I wanted).
Then the problem was that in the middle of writing the .img
the freaking cheap bastard micro usb unplugged!!!
BAMM!! phone now is bricked, I cannot get into recovery/fastboot mode
since I cannot press the volume key and my phone is bricked.
I tried going through fastboot mode via my computer again,
but the computer doesn't recognize the device since it still
looping there forever at the google logo. I try installing USB
DRIVERS to see if I could do some "magic" haha. Got
error "This device cannot start ..." And still at the same problem.
I know I can get back to my recovery if order the part for the volume
key, I ordered the part to replace it, but trust me I was 3 weeks without
my phone and now this problem
Is there any way that I can get to fastboot mode to factory reset my phone
without volume key with a bricked forever looping a "google" logo ? :fingers-crossed: :fingers-crossed:
I appreciate any help.
Click to expand...
Click to collapse
Im not sure why your text is like this? But paraphrasing buddy comes a long way
Just hold the power button, until it dies, or just let it die in general since your volume button (You only need Vol down and Power) to power it off completely. Since your Volume keys are gone, the best solution is to wait for the replacement before doing so, unless you can get the contact keys to trigger the Volume button, you're in a loss atm. No OS or Volume keys means you can't trigger ADB commands or boot into fastboot. Just wait it out I guess?
Related
Okay so I seem to have run into a little problem I was planning on updating cleanrom up to 1.2.5 but was on cwm. I had managed to switch over successfully to twrp 2.2.0. I went ahead and used goo manager to download the updated zip of 2.2.1 and tried flashing it thru twrp. Now I am stuck in google bootloop and cant get into recovery or more importantly bootloader. I have been trying last 30mins to hold power and both volume buttons but it either keeps rebooting back to the google screen or not doing anything at all just have to repress to to turn it off but it will turn back on automatically. I tried hooking it up to my usb and labtop but it looks like it wont even recognize it. I just fully charged it so I am good for now just a little worried cant get out of this mess.
I ran into a problem like that with clockwork recovery it kept on rebooting in recovery but I could still go into download mode I was at work away from my computer so I had no choice but to keep trying that three button magic until it finally restored a backup I had on my external card.just keep on trying to pull the battery then try to go into recovery. You might 've gotten a bad download
Sent from my SGH-T999 using xda premium
problem is I cant get into recovery. or the green screen to get to bootloader. It just completely stuck in a bootloop on the google screen mocking me... I am really contemplating opening it up and taking out battery but is that a good idea? Or is there anything else I can do?
so I pulled off the back cover but really dont want o disconnect the battery might mess something up but I cannot get the device to shut off.
disconnecting the battery does nothing it shuts it off and keeps it off but when I connect it to the charger the battery symbol pops up for a second and then goes completely blank. I went ahead and tried again to boot into bootloader pressing power vol up + down and all combinations of power vol -, power vol +
power turbo press vol +/- but no luck still in google screen.
If you're in a bootloop you need to connect your Nexus 7 to a computer. Then you will be able to access recovery via the Power button and volume buttons.
is it going to make a difference that everytime i try to reboot it just the black google screen? I have tried it connected to the wall charger and connected usb to the labtop but nothing.
clago87 said:
is it going to make a difference that everytime i try to reboot it just the black google screen? I have tried it connected to the wall charger and connected usb to the labtop but nothing.
Click to expand...
Click to collapse
It's supposed to do that when you're trying to go to recovery from bootloader without the USB cable plugged into a computer, may need to have the drivers installed on said computer. It's an issue with the nexus 7 bootloader and every one of them does it. What your experiencing is perfectly normal if you tried to go to recovery from bootloader with the bolume buttons and then got the google screen bootloop.
If it doesn't work when you plug it in and try, then try unplugging it, manually rebooting with it plugged in first, or vice versa
Update: I can get on Team Viewer and remotely reboot you into recovery through the PC if you want, or at least give it my best shot.
ok so i disconnected battery and have the device off. I should then try connecting it to the pc and try booting up holding down all buttons?
clago87 said:
ok so i disconnected battery and have the device off. I should then try connecting it to the pc and try booting up holding down all buttons?
Click to expand...
Click to collapse
Have you installed the right drivers on the computer you're using, for ADB and the device drivers, when you unlocked and rooted?
Answer to your question is yes try that. But I wouldn't be disconnecting and reconnecting it, I can't recommend that and then learn tomorrow that static zapped something important.
yea I am getting nothing by connecting to pc. I have all the drivers adb and fastboot installed when I rooted and unlocked couple weeks back but it looks like device is not being recognized or read at all by the pc.
connecting to the pc holding the volume + button gets it recognized for a second and tries to install a driver apx but unsuccessfully.
I am not making any progress whatsoever kinda sucks starting the weekend like this. I have gone thru some bad stuff with my atrix but nothing like this were I cant even access my bootloader boot into recovery or even fastboot. Should I try and get it to just stay off and see if overnight it works its own magic? Hate going to sleep witht his on my mind but I think with a clear mind in the morning something good will happen.
I can get it to stay off by holding both vol+ and vol- but trying to turn it off with just the power button just keeps it turning back on/off...
so I slepted on it thru the night let the tablet rest but went back this morning and I still cant get into bootloader or recovery. Is there anything I can do?
Has anyone else had this problem where they cant boot into recovery or bootloader? It's like the power button and vol keys are unresponsive even though they still work to turn on the device.
are you sure that you flashed the right recovery? but you should still be able to get the bootloader. are you pressing power + volume down(volume down, not both volume buttons. i noticed you wrote both volume buttons) to get into the bootloader?
I think I chose the right recovery the first version downloaded thru goo manager but it was the 2.2.0 version. I had the option on the of downloading the 2.2.1 zip or the .img but i downloaded the .img to just to flash with the current version of twrp that was working. There have been times were I have not been able to get into recovery on my atrix or htc but I've always been able to get into the bootloader this is the first time I've been locked out of my device kind of got me scared its not even a month old. So you say to get into bootloader you dont have to hold down both volume buttons? I will try again to power back up using the volume down and power button at same time... Wish me luck
clago87 said:
I think I chose the right recovery the first version downloaded thru goo manager but it was the 2.2.0 version. I had the option on the of downloading the 2.2.1 zip or the .img but i downloaded the .img to just to flash with the current version of twrp that was working. There have been times were I have not been able to get into recovery on my atrix or htc but I've always been able to get into the bootloader this is the first time I've been locked out of my device kind of got me scared its not even a month old. So you say to get into bootloader you dont have to hold down both volume buttons? I will try again to power back up using the volume down and power button at same time... Wish me luck
Click to expand...
Click to collapse
good luck!
yea, only power button and the volume down button.
quick question before I connect the battery does it make a difference whether or not I have it plugged in charging or connected to the PC while trying to boot into bootloader?
such friends have a big problem with my G2 I want meti up the volume on the stock rom kit kat and so we change the audio xml file I saw in a tutorial here in HTCMania, but restarting the phone will stay locked in bootloop where it says tmobile.
then proceeded to do hard reset thinking that would be solved well but after performing hard reset STAYING was still locked.
well I'll have to reinstall the software and told me when I headed to want to put the phone in download mode (off the phone and press Vol + connect usb cable) to my surprise the phone did not enter the download mode. the only thing it does is connect the cable to charge on and get off.
and since then I can not find a way to revive him because I can not install the software, and "NO I HAVE INSTALLED A CUSTOM RECOVERY" so do not'm desperate someone could throw me a light? if somehow you could do enter download mode on the phone in an alternative way?
my device is a rooted
tuberodx7 said:
such friends have a big problem with my G2 I want meti up the volume on the stock rom kit kat and so we change the audio xml file I saw in a tutorial here in HTCMania, but restarting the phone will stay locked in bootloop where it says tmobile.
then proceeded to do hard reset thinking that would be solved well but after performing hard reset STAYING was still locked.
well I'll have to reinstall the software and told me when I headed to want to put the phone in download mode (off the phone and press Vol + connect usb cable) to my surprise the phone did not enter the download mode. the only thing it does is connect the cable to charge on and get off.
and since then I can not find a way to revive him because I can not install the software, and "NO I HAVE INSTALLED A CUSTOM RECOVERY" so do not'm desperate someone could throw me a light? if somehow you could do enter download mode on the phone in an alternative way?
my device is a rooted
Click to expand...
Click to collapse
First i would try getting in to recovery using the hardware keys. Look it up on you tube. Then you should be able to use a back up if you made one.
To get in download mode you need to power off then while powering on hold the vol down key and plug in the usb cable. That will get you in download mode. You shouldn't have to do that though if you have a back up. Your phone isnt bricked?
fountain79 said:
First i would try getting in to recovery using the hardware keys. Look it up on you tube. Then you should be able to use a back up if you made one.
To get in download mode you need to power off then while powering on hold the vol down key and plug in the usb cable. That will get you in download mode. You shouldn't have to do that though if you have a back up. Your phone isnt bricked?
Click to expand...
Click to collapse
sorry friend, but is that as explained in the previous post: long press volume + but does not go into download mode, this as locked or not happens.: Llanto:
Jesus Christ.
Press and hold power and volume down until the display shuts off and the LG logo appears. Then, try pressing and holding volume up and volume down until a hard reset option appears. Reset the device and try booting it up. You will lose all data on it, but that's what you get if you're not smart enough to back it all up.
robogo1982 said:
Jesus Christ.
Press and hold power and volume down until the display shuts off and the LG logo appears. Then, try pressing and holding volume up and volume down until a hard reset option appears. Reset the device and try booting it up. You will lose all data on it, but that's what you get if you're not smart enough to back it all up.
Click to expand...
Click to collapse
A hard reset will not help if he made changes to the system partition (which it sound like he did). If he has a recovery installed (kind of a weird sentence in the OP) this would take him into the custom recovery though.
@tuberodx7 If all else fails I'm convinced you can get it into download mode if you do it right, something like that should definitely not kill that. From there you can flash a factory image (Search for the return to stock thread in the General forum)... Your device is far from hardbricked, please do your research...
THis is general thread. Post it at Q/A.
Preggy said:
A hard reset will not help if he made changes to the system partition (which it sound like he did). If he has a recovery installed (kind of a weird sentence in the OP) this would take him into the custom recovery though.
@tuberodx7 If all else fails I'm convinced you can get it into download mode if you do it right, something like that should definitely not kill that. From there you can flash a factory image (Search for the return to stock thread in the General forum)... Your device is far from hardbricked, please do your research...
Click to expand...
Click to collapse
this is my problem not enter in download mode repit: NOT ENTER IN DOWNLOAD MODE
https://www.youtube.com/watch?v=KJ1KV9dU3Ek&list=UU9xeE8I7Gya4rY9ULBsEv3g
tuberodx7 said:
this is my problem not enter in download mode repit: NOT ENTER IN DOWNLOAD MODE
https://www.youtube.com/watch?v=KJ1KV9dU3Ek&list=UU9xeE8I7Gya4rY9ULBsEv3g
Click to expand...
Click to collapse
Ok, if you're absolutely definitely positively sure you're doing it right and it still doesn't work, you might have to manually reflash some of the partitions... Refer to this thread (and be careful) http://forum.xda-developers.com/showthread.php?t=2582142
(Although you might want to wait for someone to confirm this as I'm no authority on the subject)
Update: I was able to get it recognized via fastboot and used NRT to flash back to stock under the bootloop option.
Now rooted with factory 5.0.1 !
The way I got it to recognize the tablet was to press the middle part of the volume switch (effectively pressing up AND down volume) and the power button and then the bootloader loaded and I could use fastboot but not adb. I read in another thread about pressing the middle of the sound button. Never heard of that before.
Hopefully someone can help me out.
i updated via abd using the flash all script. Now when it boots up it's stuck on the logo of flying color dots. (yes, I waited 15-20 min at least)
Anyway, now I can boot into fastbboot mode but the computer doesn't recognize it.
If I try to boot into recovery (which I think got corrupted) then I just get the android icon with a red exclamation point.
I have no way to clean anything up cause I can't communicate with it.
Edit: I'm stuck in a boot loop also. If I just let it boot it stays on the logo forever. When I try to turn it off it just reboots to the logo.
If I use the keys to boot to fastboot it just sits there and now I can't even change the option at that point and there's no way to completely shut it down!
Thanks for any assistance you might have.
Pressing both volume buttons and the power button will get you into fastboot mode. It's always the last fallback position and I've never known it to fail. I had the same with a bad flash on Tuesday when trying to solve my wifi problems.
Glad you got it sorted
Thanks.
I was getting to the bootloader screen but couldn't get the PC to see it. I always used to use power/vol down combo to boot into bootloader and didn't even know u could press both vol up and down at the same time.
Or maybe I'm imagining it all.
GrenW said:
Pressing both volume buttons and the power button will get you into fastboot mode. It's always the last fallback position and I've never known it to fail. I had the same with a bad flash on Tuesday when trying to solve my wifi problems.
Glad you got it sorted
Click to expand...
Click to collapse
Please help me. I am in a sort of panic right now.
I have a ZTE Blade C2 v809, sold here in Portugal as Meo Smart A12. It was rooted and working fine. I was however getting some error 24's trying to install apps. I thought this might have had to do with using Titanium Backup to remove TouchPal (I did make a backup first), so I decided to restore TouchPal. There were however some errors in the restore and it was stuck there, so I decided to reboot the phone.
Chaos. Now it wont boot. If I press the button normally, the phone boots, I see the android logo, the screen goes black (Not shutdown black, a sort of light black background) and nothing happens. If I try to boot into Recovery mode by holding the power button and the volume down key, I just get the android logo stuck there, nothing happens. If I hold the power button and the volume up key, I get the picture of that laying down android with the message error.
Any more info I must provide please tell me, I am desperate for a solution, If I lose this phone I wont be able to get another one.
Okay I fixed it. Turns out the recovery menu DID work if I waited for a long time and tapped the screen. Used the update.zip available from the site, and it works like a charm
Yay, I bricked my phone, too.
I did something similar, changed recovery-from-boot.p name to recovery-from-boot.p-bak and install-recovery.sh to install-recovery.sh-bak
Now the phone doesn't boot properly, in fact it's stuck in a boot loop:
>starts
>shows white ZTE logo on screen
>restarts
Tried connecting the phone via USB cable and used fastboot devices & adb devices commands, no devices found.
Also tried pressing "power + vol down" and "power + vol up", nothing. I can't enter recovery mode or bootloader.
Apparently the remaining way to get in it's trough the SD slot, or maybe there's another way.
I kindly ask for help, couldn't be possible that I ruined this cell phone so fast.
Ideas, somebody?
Hi, I get this phone yesturday... I've installed last firemware ( 6.0 to 7.0.1 ) and after I tried with Tuliptool to install recovery but after this my phone dont show recovery when I tried so I was thinking I've forget to Unlock it before... and obvously I tried to unlock ( with tulip ) but I got error message in cmd ( I don't remerber... ) and now it show only Zte and it bootloop on it so I didn't have recovery, I can't use edl because I can't boot.. so there is something I can do or I bricked it in less than 1 day.. ? :S
Got the same problem
EDL can only be entered once the phone is completely off. You need to hold down volume up + volume down and then plug in the usb cable (dont touch the power button). The phone wont do anything, it will still look off but you will hear the device plugged in tone in Windows and will be able to find the device in zadiag. Also after a few attempts Windows stopped showing the device and I had to restart Windows before it worked again. Can you get this far?
dmo199 said:
EDL can only be entered once the phone is completely off. You need to hold down volume up + volume down and then plug in the usb cable (dont touch the power button). The phone wont do anything, it will still look off but you will hear the device plugged in tone in Windows and will be able to find the device in zadiag. Also after a few attempts Windows stopped showing the device and I had to restart Windows before it worked again. Can you get this far?
Click to expand...
Click to collapse
no my phone is just showing ZTE when it is booting then just instant turns off and starts again showing ZTE and it is doing that until the battery is empty
I did have that before, I'm not sure the exact combination I used, charge it up and then remove the cable, hold the power button and either the volume up, or volume down or both for anywhere between 5 and 20 seconds before letting go and seeing if it stays off. If it doesn't work try again and again and again, Its completely trial and error and took me a while to get it to work
dmo199 said:
EDL can only be entered once the phone is completely off. You need to hold down volume up + volume down and then plug in the usb cable (dont touch the power button). The phone wont do anything, it will still look off but you will hear the device plugged in tone in Windows and will be able to find the device in zadiag. Also after a few attempts Windows stopped showing the device and I had to restart Windows before it worked again. Can you get this far?
Click to expand...
Click to collapse
I'm not quite sure but on the European version of the Axon you can't do that by holding the buttons.
I understand that the only way to get in edl mode is software, no other choice than rebooting from the OS using the command adb reboot edl. So if you can't make your device completely started first, i guess it's bricked. But maybe i'm totally wrong.
vincent1967 said:
I'm not quite sure but on the European version of the Axon you can't do that by holding the buttons.
I understand that the only way to get in edl mode is software, no other choice than rebooting from the OS using the command adb reboot edl. So if you can't make your device completely started first, i guess it's bricked. But maybe i'm totally wrong.
Click to expand...
Click to collapse
I also messed up mine. I did everything until I had android 7, rooted, but lost IMEI. then I, THE IDIOT, tried to re-flash stcok android 6......booom. bricked.......
however.........power the phone off:
hold vol- power for 10 secs. phone should boot into FTM. then power it off by pressing power for about 5 secs. phone is off.
now vol+power and the phone should go to recovery, even if stuck on the logo, my pc reads it as recovery in adb devices......
tomorrow I'll see if I can get out from there. my experience doing this before is that from the recovery the ADB reboot edl works
cheers