Guy,
Please Help
I was upgrading my XDAIIi to Xda IIi ROM v 1.11.162. during which it show an error message and it just went blank looking closely at the screen showing USB at the top of the screen and the bottom of it has v1.01,
when put on the cradle it showing USB.
I have press the reset botton God knows how many times
Please help someone
Were you trying to upgrade to the rom I posted? With RADIO 1.03 in the filename?
You need to press the power, d-button down and the reset button all together.
Then run the update program again. If it is the original O2 rom then it should work fine from there. If it is the rom I posted then the update will fail initially, just run the program a second time without touching your phone at all.
Hope this helps.
No, I am upgrading from O2 website. I am sorry it not connecting to my pc at all. No sign of life ,
it only display USB on the screen
Try doing a hard reset by holding the power button down and pressing the reset button.
Put it into bootloader by pressing the power, d-button down and the reset button all together and releasing them at the same time. The screen should say SERIAL. Connect it to your PC and the screen should then say USB. Then you should be able to run the update.
If this doesn't work as a last resort try taking the battery out for a while to let the backup run down and start again. Whatever happens the phone needs to go into bootloader mode and a rom applied to get it working again.
Please, which is the D-botton you are refering to
The D button is the "Directional" button, in between the green pickup phone button and the red hang up button.
Related
Well I installed card export, and got some errors, after like the 2nd error my 9100 resetted itself and is stuck in the boot screen with cloads now.
A hard reset is no go, just behaves as a normal reset, and I'm pretty sure I red about this problem in another thread somewhere here, just can't seem to find it.
Anyone got an idea?
The only thing it shows now is:
IPL 1.01
SPL 1.01
GSM 1.13.10.0
OS 1.6.7.1
I am also stuck on the boot screen after my ROM update froze! Is this device now dead?!?! Please tell me there is a way to fix it!
Press and hold camera button and press resett button while you holding camera button.
now you enter bootloader (tree color screen) connect device to pc and run update you had on your device before it crached
Got it!!!
Hold down the Voice Button plus the Camera button at the same time and hit the reset button. That takes you into bootload mode. Then you will have a USB connection to the PC - not via active sync. Run one of the RUU update programs and you will be back....
At least it worked for me!
as it did for me
kjk said:
Press and hold camera button and press resett button while you holding camera button.
now you enter bootloader (tree color screen) connect device to pc and run update you had on your device before it crached
Click to expand...
Click to collapse
My soft reset button is not working. I can only reset by taking battery out of mda. What to do now? Help!
I was trying to upgrade to the WM5 rom. But it went wrong and now my smt5600 is not booting up at all. Its DEAD. Anyone have any idea how i can get the phone working again. I connect the phone to the USB cable and there still nothing. HELP somebody....
Can you get it manually in bootloadermode? If that's possible, connect USB & reflash. I don't know how to get a typhoon in bootloader, that's something you've got to find out yourself.
Regards, M
[edit]
& the wiki tells you how to get it in bootloader:
the bootloader
enter bootloader, by turning off device, then hold down camera button, and briefly press the power button.
see http://www.clubimate.com/index.asp?PageAction=DEVICEFAQ_SP3 for more info
an easier way, that does not require the right timing for button presses, is to hook your device to usb, turn it off. press the camera button, it should immediately enter the bootloader.
The phone seems dead. It will not turn on. No lights. It seems if the flash memory is shut down. I tried to flash it with WM5 and look where it got me. I wish I can get to bootload but nothing.
I assume this WM5 'release' wasn't released by your provider, was it? Did they release any official updates & is your phone still covered under warranty? If so try to get it fixed with the claim that you upgraded with the rom they supplied. It's worth to try, cause I don't know no other way than a Service Center to get it functioning again.
BTW was your battery full enough or almost empty?
Feeling with you, M
Hi my tmobile wing that i bought off the craigslist is stuck on the main screen with tmobile and is not going beyond it
can some one please help me how can i make this phone work again
Try a hard reset
(hold down both soft keys and poke the stylus through the hole on the side of the phone under the volume slider)
If that doesn't work, you need to install this :
T-MOBILE STOCK RUU
In order to run this, you'll need to plug your phone to your PC via USB, then go into bootloader mode ... which means you need to hold down the camera button (and keep it down) while you soft reset (poke stylus through hole under volume slider)
When your phone is in bootloader mode, and plugged into USB, it should show "USB" in the corner... once that happens, run that file which will take the phone back to factory settings.
duprade said:
Try a hard reset
(hold down both soft keys and poke the stylus through the hole on the side of the phone under the volume slider)
If that doesn't work, you need to install this :
T-MOBILE STOCK RUU
In order to run this, you'll need to plug your phone to your PC via USB, then go into bootloader mode ... which means you need to hold down the camera button (and keep it down) while you soft reset (poke stylus through hole under volume slider)
When your phone is in bootloader mode, and plugged into USB, it should show "USB" in the corner... once that happens, run that file which will take the phone back to factory settings.
Click to expand...
Click to collapse
Thanks a million for the help now my wing is working again !!!!
duprade said:
Try a hard reset
(hold down both soft keys and poke the stylus through the hole on the side of the phone under the volume slider)
If that doesn't work, you need to install this :
T-MOBILE STOCK RUU
In order to run this, you'll need to plug your phone to your PC via USB, then go into bootloader mode ... which means you need to hold down the camera button (and keep it down) while you soft reset (poke stylus through hole under volume slider)
When your phone is in bootloader mode, and plugged into USB, it should show "USB" in the corner... once that happens, run that file which will take the phone back to factory settings.
Click to expand...
Click to collapse
Ahhh... it's not working, the utiltu says that it can't connect to my phone. What do i do. Is there some thing in settings or some hting that i need to change. PLease help. The stcuk screen is really getting me scared.
Wont Run Bootloader
I have tried holding the camera button and soft resetting multiple times, but it keeps getting stuck on the tmobile screen? What do i do??
After I flashed a ROM for the just clean oven, I had this same problem.
I fixed it (after many hours) by downloading this ROM:
http://www.mediafire.com/?clvw3cvyclo
Entering bootloader (hold in camera button and soft-reset.)
Running the tmobile rom.
It was very strange, it took 3 or 4 tries, but it eventually worked.
I don't understand why, since I did nothing differently, but try it afew times.
Hope you get it up and running soon!
BTW, what are your SLP numbers shown on the bootloader screen?
thx really worked
tryed like 4 times then it worked
PuffyTacos said:
After I flashed a ROM for the just clean oven, I had this same problem.
I fixed it (after many hours) by downloading this ROM:
http://www.mediafire.com/?clvw3cvyclo
Entering bootloader (hold in camera button and soft-reset.)
Running the tmobile rom.
Click to expand...
Click to collapse
...worked for me as well. Now, I'm too chicken to run the Hard SPL.
Hi Everyone!
I got the following problem with my Charmer:
The previous guy, who had this phone, flashed it with a wrong ROM. The phone hangs at the T-mobile splash screen. I beleived that I can fix this problem, because I made this with my Charmer earlier. (Thanks for rmagyar's Charmer rescue kit). But at this time, when I put the phone into bootloader mode to use the rescue kit, there is no usb connection. It can't be charged, and the PC doesn't see the phone.
Any ideas, how to flash the rescue kit? Can I get back the usb connection?
I have same problem, anyone know?
try this, plug usb cable in PDA, press and hold power+camera button, tick RESET 5 sec and release reset button, but hold power+camera. if you see left side screen USB release power+camera button. it work for me, may be helped you!!!
I am sorry, I have this problem on my Xperia X1, but maybe someone from there have an idea...
Check:Start->Setting->NetworkConnection->WindowsMobile-basedDevice :
If Disabled than restart PC.
Hello,
I wanted to ask if someone clashed with problem like that and knows how to solve it. I had 1.66 rom eastern euope and installed 2.08hspl, tried to install latest magldr and I am guessing problem occured because I didnt installed latest radio. Now when I am turning on the phone it shows white screen and green logo and stuck. Tried turning of the phone and holding - volume button when turning on that didnt make any difference can someone help me to revive my phone ?
So you tried to get into bootloader, but the thing is you have to try harder.
Bootloader should work just fine.
So again, turn of your phone. while the phone is turned off, keep the vol down, and press the power button.Release the power button, but keep the vol down pressed.
You can try the other way: hold the vol down pressed and reset the phone(red button on the back).
If you want to use the SD card method to flash something you still have to enter the bootloader, so you must keep trying.
Forgot to ask: did you manage to enter the bootloader or not, cause you only said it did not make any difference????.What does that mean?
I already trying to enter bootloader for the five hours, so I guess it's impossible, also tried that thing with red button it didnt load up that bootloader screen. The thing is that holding volume key down didn't work for me before to get into bootloader even when the phone was ok but it did install all roms which I tried so I didnt think that this would be problem either apparantely it is... Maybe youu have some other suggestions how to fix it ?
If you can make the pc recognize the HD2 then you can flash anything.
But i think that this is only possible in bootloader or windows or android.
So this is a problem.
No ideea for now.
Anyone help???
But you *do* push both vol. down and power buttons and keep them pushed until the screen turns on, don´t you?
I didn´t get into the bootloader as long as I didn´t kept both buttons pushed long enough... had to learn the "timing" kind of...