Hi,
My Imate JAMin is dead after trying to flash the ROM with the QTEK S200 ROM using awizard. Anyways my phone will not connect to PC when I try to downgrade to the original ROM file (the JAM_WWE...exe). The problem is my PC wont connect to my phone, I get error 240 or something similar (cannot connect to phone message). So what I am asking is if anyone can backup their Imate JAMin ROM to a SD card and upload the image for me. I figure somebody here has got to have an extra SD card lying around somewhere. It would be greatly appreciated. Thanks in advance.
Hi,
If you tell me how to make a SD image I will make one for you.
thanks for offering help. I am out right now, when i get home i will do a search and find out how to do it. In the meantime if anyone has any links for backup rom image to sd for wm5 and how to save this image to a file and then to write the image file to sd card again. thanks again.
thanks for offering help. I am out right now, when i get home i will do a search and find out how to do it. In the meantime if anyone has any links for backup rom image to sd for wm5 and how to save this image to a file and then to write the image file to sd card again. thanks again.
ok got some links for backing up to sd card and writing the image to file:
http://forum.xda-developers.com/viewtopic.php?t=32866
There are instructions on the 7th post in this thread.
http://forum.xda-developers.com/viewtopic.php?t=43399
This one has instructions on the 8th post.
Thanks
jeeb75 said:
Hi,
My Imate JAMin is dead after trying to flash the ROM with the QTEK S200 ROM using awizard. Anyways my phone will not connect to PC when I try to downgrade to the original ROM file (the JAM_WWE...exe). The problem is my PC wont connect to my phone, I get error 240 or something similar (cannot connect to phone message). So what I am asking is if anyone can backup their Imate JAMin ROM to a SD card and upload the image for me. I figure somebody here has got to have an extra SD card lying around somewhere. It would be greatly appreciated. Thanks in advance.
Click to expand...
Click to collapse
1. Put the phone in bootloader mode (make sure battery is over 50% charged).
To do this, press the Camera button down, hold it there, and press soft reset. Let off the soft reset button BUT continue to hold the camera button down until you see 4 color bands on the screen. Let go of the camera button when they appear.
2. Connect USB cable to PC.
3. Re-run imate JAMin full flash .EXE file. Should work fine and get you back to normal.
jaxf250 said:
jeeb75 said:
Hi,
My Imate JAMin is dead after trying to flash the ROM with the QTEK S200 ROM using awizard. Anyways my phone will not connect to PC when I try to downgrade to the original ROM file (the JAM_WWE...exe). The problem is my PC wont connect to my phone, I get error 240 or something similar (cannot connect to phone message). So what I am asking is if anyone can backup their Imate JAMin ROM to a SD card and upload the image for me. I figure somebody here has got to have an extra SD card lying around somewhere. It would be greatly appreciated. Thanks in advance.
Click to expand...
Click to collapse
1. Put the phone in bootloader mode (make sure battery is over 50% charged).
To do this, press the Camera button down, hold it there, and press soft reset. Let off the soft reset button BUT continue to hold the camera button down until you see 4 color bands on the screen. Let go of the camera button when they appear.
2. Connect USB cable to PC.
3. Re-run imate JAMin full flash .EXE file. Should work fine and get you back to normal.
Click to expand...
Click to collapse
Thanks for your help. I tried that before 5 times and the phone would get stuck on the boot splash screen. Now I cannot even get the phone into bootloader mode anymore unless it is plugged directly into the outlet. I do not know why it is doing this. I have charged the battery all the way. I also have a magician so I have tried 2 different batteries charged all the way. Since I can only get the bootloader mode while it is plugged directly to the wall, I cannot connect it to the pc. I have no idea why it is doing this. I just want to try restoring from an SD card rom backup before I send it in to imate.
I have made a sd image from my ROM and uploading it now. It's about 54 MB. I also tested to flash my Imate with this card and it works good. When you enter bootmode with the sdcard inserted it asks if it should restore from card. At this point press the comm manager button (the button under the volume control).
It's a image on a 128 MB SD card. You just have to write the image to your card with ntrw.
Good luck and let us know the results!
swartb said:
I have made a sd image from my ROM and uploading it now. It's about 54 MB. I also tested to flash my Imate with this card and it works good. When you enter bootmode with the sdcard inserted it asks if it should restore from card. At this point press the comm manager button (the button under the volume control).
It's a image on a 128 MB SD card. You just have to write the image to your card with ntrw.
Good luck and let us know the results!
Click to expand...
Click to collapse
Thank you so much!!!! I really appreciate it. I just hope it works. If it does not work for me at least others can get this sd image to fix their prophets in the future if they cannot get it to connect to their PCs. I will let you know my results.
Do you know if the device has to be unlocked already or can you use this to get around the CID lock?
The SD card flash did not work for me. I was hoping the RGB color screen was the bootloader but it was not. I guess there is something wrong with my JAMin so I am sending it in to imate in the middle east. I would like to thank Swartb for taking the time to get the ROM image on SD card.
To answer the CID lock question, I think it does not bypass it so if you want to use the SD card to restore it has to be the same phone model so in this case the JAMin.
Hi!!!! could you tell me where is that SD copy of your ROM????
Thnaks!!!!!!
Related
could anybody explain me how the USB FLASH MODE function in the bootloader works??
when i boot up in bootloader mode (5.15) and press the rec-key the USB FLASH MODE shows up?? how can i use this??
tim
Anyone do not know how to do a USB FLASH MODE upgrade ??????
pleasee !!!!!!!!!!!!!!!!!!
http://forum.xda-developers.com/viewtopic.php?t=27384&highlight=guide
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
look and thou shall find
thanks
Rudegar said:
http://forum.xda-developers.com/viewtopic.php?t=27384&highlight=guide
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
look and thou shall find
Click to expand...
Click to collapse
Thanks a lot for you answer, but I need to know how to do a USB FLASHING, my SD card slot is probably broken so I cannot use SD card....
I read, that it is possible to flash MDA with BIN file (mtty.exe program). Does anybody have experience with this type of flashing?
Where can I find BIN versions of ROMs?
my bad
http://lumpistefan.dyndns.org/
make a rom
put the xda in the cradle
run the exe file
Rudegar said:
my bad
http://lumpistefan.dyndns.org/
make a rom
put the xda in the cradle
run the exe file
Click to expand...
Click to collapse
I cannot upgrade with exe, because it needs ActiveSync and WM200X installed..... i think.
:-( My 2003ROM is broken.
Thanks for your replies, I'm trying to solv this problem nonstop since sunday.
Maybe just throw MDA in garbage could solv my problem...
Bootloader 5.15 works and GSM OK. Thats all....
So, why do you think your SD-Slot is broken?
Have you tried to insert a empty SD-Card in your devuce, enter bootloader, making a backup of your exisiting ROM to your SD-Card and the reenter the bootloader?
Stefan
LumpiStefan said:
So, why do you think your SD-Slot is broken?
Have you tried to insert a empty SD-Card in your devuce, enter bootloader, making a backup of your exisiting ROM to your SD-Card and the reenter the bootloader?
Stefan
Click to expand...
Click to collapse
Thanks for reply..... I tried to backup and load the ROM back, but
1) after download to the MDA, everytime bad checksum and cannot start win.
2) I tried SD card test in bootloader and everytime test said "TEST ERROR"
3) I tried 4 different SD cards with same results
4) I tried many ROMs (2002 and 2003) - same problem "Checksum is not correct"
mikulkajan said:
Thanks for reply..... I tried to backup and load the ROM back, but
1) after download to the MDA, everytime bad checksum and cannot start win.
Click to expand...
Click to collapse
Explain this a little bit more....
When you have backup the ROM via bootloader to the SD. You get there a checksum error?
What happens when you soft reset the device after backup and then reenter the bootloader?
When you're trying to install a new ROM on your device, what for SD-Card Writer are you using? Internaly build or external device?
Stefan
LumpiStefan said:
mikulkajan said:
Thanks for reply..... I tried to backup and load the ROM back, but
1) after download to the MDA, everytime bad checksum and cannot start win.
Click to expand...
Click to collapse
Explain this a little bit more....
When you have backup the ROM via bootloader to the SD. You get there a checksum error?
What happens when you soft reset the device after backup and then reenter the bootloader?
When you're trying to install a new ROM on your device, what for SD-Card Writer are you using? Internaly build or external device?
Stefan
Click to expand...
Click to collapse
I'm using external SD reader (USB) - I was not able to do it with internal PCMCIA reader, so I borrow one.
When I try to do backup ROM to SD via bootloader it is fine, but when I try to give the ROM back to the MDA, everything seems to be allright, but after download from SD to MDA I get Download OK,but Checksum is not correct.
I also tried to test my 4 SD cards in the "bootloader SD card test" and everytime it says TEST ERROR. This is why I think my SD card slot is bad :-(.
I am really desperat and do not know what to do :-(.......
Any help appreciated
I think that only way for me is to load the ROM to the MDA through USB, but not the ActiveSync way. I read somewhere, that it is possible with "bin" file by mtty.exe program, but I cannot find any bin ROM.
RE
HI
hard reset your device by taping and handling the top off button and reseting, the bootloader will invite you to wait. do so, wait untill you'll see the message '' gsm error'' then tap the sound button on your left, put the device back on the craddle.
Do this if you had already enabled the usb for dos in the bios of your computer.
this shall work
salute!
I have tried everything under the sun to upgrade my T-Mob PPPC/PE with Yorch's T-Mobile unofficial Upgrade to WM2003. I can't get it to work. Tried: loading ROM to SD card and soft reset, using XDATools OSImagetool, etc... :x
I believe it is tough for any one to advice if you don't state what exactly you did and what error messages you got .....
Are you trying bootloader method. or other method. Please present more detail regarding your problem including current rom/radio etc and things that you have tried already.
Sorry. First, loaded the file, NK.NBF onto my SD card using OSImagetool.exe. Then per instructions that were given to me, did a soft boot on the device. It simply rebooted and after it came up, there was a message on the screen asking my if I wanted to format the SD card for use with the device and telling me that if I hit "yes", the card would be erased and all data lost on the card.
The next thing I tried was to use OSImagetool.exe directly. Source- nk.nbf (on my desktop) and Destination: Device memory (via Programme A). The error I got was "Programme A not found - run with "--register" error opening target device.
I even tried to run OSImagetool.exe from the command prompt using --register as an argument and got the same exact error.
Then, I loaded the NK.NBF file to the SD card then ran OSImagetool with source: SD card, destination: Device memory. Then got the same error: "Programme A not found - run with "--register" error opening target device."
Hope that helps.
i dont know the program OSImagetool
but when i updated my xda to 2003 i used xdatools to transfer the rom to the sdcard and then i DIDENT! softreset but went into the bootloader and it started to update
Rudegar said:
i don't know the program OSImagetool
but when i updated my xda to 2003 i used xdatools to transfer the rom to the sdcard and then i DIDENT! softreset but went into the bootloader and it started to update
Click to expand...
Click to collapse
They are the same program OSImagetool is just the name of the .exe file.
@jhug whats your bootloader version? Sounds like it might be 5.17 or newer!
HTH
When the xda asked you if you wanted to format the sd card you should answer no, it means the rom has in fact been written to the card, you then need to enter bootloader mode, a soft reset is no good, just push the stylus in the reset hole while holding down the power button, it will then ask you to push the action button which is the centre of the 4 way pad, your rom will then be programmed, make sure the battery is charged also. When the process is complete, unscrew your stylus, then insert the top half of the stylus in the hole on the bottom right of your xda, just push once, after one minute push again, this turns the battery off, then on again, you should then have a working system.
my bootloader is 5.22 btw
I wanted to check and see if the ROM was in fact on the SD card, so I did a soft reset and the notification came up and asked me if I wanted to format the SD card. I clicked no and assumed the nk.nbf file was on the card. I then did a soft reset while pressing the power button and went into bootloader mode. It did not ask me to push the action button, so I did anyways and it went into diagnostics mode. Ideas???
I'll try reloading the ROM on the SD card and try it again. I'll keep everyone posted. Thanks for your help! BTW, bootloader version is 5.15.
Rudegar said:
my boot loader is 5.22 btw
Click to expand...
Click to collapse
Consider yourself luck if you haven't had any problems upgrading
using the SD card boot loader method then!
Also most of the RS upgrade failures that I seen / fixed and tried to fix had boot loader 5.17 or higher, so keep that in mind. :wink: Lucky, Lucky you!
jhug said:
I'll try reloading the ROM on the SD card and try it again. I'll keep everyone posted. Thanks for your help! BTW, bootloader version is 5.15.
Click to expand...
Click to collapse
Please do!
Also whats the size and make of your SD card?
Well, I tried it again and the same thing happened. It went into bootloader mode and did not ask me if I wanted to install the new OS. I tried pressing the volume button and it said to connect the USB cable. I also pressed the contacts button and it went into Diagnostic mode. Aaaaaarrrrrgh!
BTW, it's a 256MB Sandisk card. (Great for holding about 200 songs! :lol: )
jhug said:
BTW, it's a 256MB Sandisk card. (Great for holding about 200 songs! :lol: )
Click to expand...
Click to collapse
Some how I knew you where going to say a "256MB Sandisk"!
For some unknown reason had the same problem using the same card,
if you can try using a 64MB or a 128MB card and see what happens. :wink:
HTH
It finally worked! I loaded the ROM to the 256mb Sandisk SD card while in the unit, removed the SD card, inserted the SD card, then did a warm boot while pressing the power button and the ROM image loaded! I did the usual battery cutoff and then rebooted it and it works fine. Thanks everyone who gave me advice with this. :lol: :lol:
Where there is a well there is a way, great job!
But how in the hell did you figure that one though? :wink:
I decided to get creative. Dangerous when you're working in Wallaby, but it worked! :shock:
Hi guys and gals,
How could I explain my problem...
Let's give it a try!
I have a PDA model Orange SPV1500 (the same machine also comes as Alpine, Qtek 2020i, XDA2i, etc).
Anyway, I decided to upgrade the ROM to get the latest one and to have it in Spanish, as it is my native language...
Apparently, the only way to do this is using a memory card, so I did in the following way:
I used:
The PDA (obviously)
Sd card 256 mb
The actual infor in spanish of how to do it:
http://www.pcdemano.com/phpBB2/viewtopic.php?t=13789
Spanish ROM file from Telefonica: Qtek2020iESN.nb1
romupdate.exe
ntrw.exe
CPART.EXE
MERGE.COM
SPLIT.COM
HEX Editor (HEX WorkShop)
------------------------------
1 - Using Romupdate.exe with the PDA connected to the PC in "bootloader" mode, I 'ask it' to make a copy of the ROM on the SD card (d2s 80000000 3F00000)
2 - I then take the card out of the PDA andI insert it in my card reader. Using CPART.EXE I copy the file in the HD (i.e.: ntrw read ROM.nb1 L
3 - I extract the 3 programs inside the rom file using SPLIT.EXE (split ROM.nb1)
4 - I open one of the 3 files extracted with the hex editor (HEADER.NB1) as well as the updated 'telefonica' ROM I have (Qtek2020iESN.nb1). I put the header from my rom into the telefonica one.
5 - I merge together my new Spanish ROM with the header file I extracted from my PDA with SPLIT.COM (header.nb1 + ext.img + trailer.nb1---->NEWROM.nb1)
6 - I write the new file to the SD card (ntrw write newrom.nb1 L
7 - I insert the SD card into the PDA, put it in "bootloader" mode and follow the on-screen instructions: I press the power button to start the transfer process of the new ROM to the PDA.
8 - It shows an error!!, but it seems to have finished...
9 - I restart it and...
NOTHING!
DEAD!!!
I never saw it move anymore!!
---------------------------------------------
After some research, I think I may have made a mistake when copying/pasting the ROMS
I have compared their sizes and they are 36 bytes different!
- ROM.NB1: 244 MB (255.852.544 bytes)
- NEWROM.NB1:243 MB (255.852.508 bytes)
Does anybody know if they actually have to have the exact same size??
Now I can't (anybody knows how?!) put the PDA back in bootloader more, so I can not put the old ROM back in...
The only way in wchi I manage to get any sign of life is to plug it to the pc or charger and the red charging LED lights up!
There actually seems to be a lot of power consumption! After 6 hours of inserting a full battery, it goes down to 50% (I used another PDA to check it!)
Is there any way to make the PDA go to bootloader mode?! Serial or, anything?!?!
Any suggestions, PLEASE!?!
Does you screen display anything?
Did you keep your original back-up of your ROM (ie. what you flashed to your SD card)?
Justin
weatheryoko said:
Does you screen display anything?
Did you keep your original back-up of your ROM (ie. what you flashed to your SD card)?
Justin
Click to expand...
Click to collapse
I don't see anything on the screen, ANYTHING.
And yes, i keep my original ROM in the SD card and the hard disk
Thanks for your reply,
Mino
Try....
Insert your SD Card and perform a "hard reset". Does this give you the option to "reflash your ROM' with the ROM Image on your SD card?
Re: Try....
weatheryoko said:
Insert your SD Card and perform a "hard reset". Does this give you the option to "reflash your ROM' with the ROM Image on your SD card?
Click to expand...
Click to collapse
This will never give u any options.
You need to put it in bootloader mode(engg mode) and then do a SD card ROM image flashing
kdskamal,
Thanks for the tip. You're right. I haven't done this for a while. I realized my mistake re-reading some posts at www.buzzdev.net.
Mino,
Eject your SD card with your original rom files.
Put your device in bootloader mode by pressing Power button + D-pad simultaneously +reset button with the stylus for 3 seconds
Once you see "Serial 1.XX", insert your SD card with your original ROM image.
You should be able to reflash it at that point.
Justin
That's the question!
I can't put the PDA in bootloader mode! I push power button, etc and the screen continues in black, nothing!
The only solution is to replace the electronic card, therefore you must send it in assistance. About 115€! :?
[Your SD card will be formatted in a special format during the procedure below and you won't be able to use it for other purposes unless you reformat it again afterwards. Please be adviced that you will lose the backed up ROM on SD card when you format it afterwards again!!!!]
I successfully created a FLASH IMAGE on my SD card and afterwards flashed my T-MOBILE MDA from there.
The magic tool needed for this is the HTC mtty.exe (attached below)
You have to follow exactly the STEP-BY-STEP guide otherwise the procedure will fail! I will not be responsible for any damage on your device!
Please make sure that your battery is charged to at least 50% and also back up your device before following the guide below!
CREATING THE IMAGE ON SD CARD
STEP 1
Open ActiveSync (device not attached) and uncheck USB and COM port in Connection Settings. This is necessary to release the USB port for the mtty utility!
STEP 2
Get you an SD card of 128MB or bigger (fresh formated to FAT32) and insert it in your WIZARD
STEP 3
Set the Wizard in BOOTLOADER MODE by pressing and holding POWER + CAMERA and press RESET - if you got the 3-colored screen you were successful!
STEP 4
Connect the device via USB to the computer, then start the mtty.exe on your computer
STEP 5
Settings in the mtty.exe:
Port: \\.\WSCUSBSH001
(all other settings leave the way they are! Please pay attention that you write the port exactly as mentioned above: 2 backslashes followed by a dot and another backslash - this is not a typo!!! I attached a screenshot below)
STEP 6
Now click OK. You will get a notepad-like window with a blinking cursor. After hidding the ENTER KEY once you should see "CMD>"
Type behind that: r2sd all
STEP 7
The utility will start now to write your IMAGE to SD. Please do not interrupt the process! You can see its progress on a statusbar on the bottom of the device's screen. Wait until it shows 100%. Also: the CMD> will appear again on your desktop when it is done.
You created successfully your IMAGE on SD!
HOW TO FLASH FROM THE SD CARD ???
Turn of your device!
Insert the SD card with the IMAGE you've created
Turn on your device in BOOTLOADER MODE by pressing and holding CAMERA and POWER button and performing RESET
=> Now you need to be fast!!! A white screen will appear for not longer than 3 seconds asking you if you want to FLASH from SD card. You have to press the VOICE DIAL / RECORD button within that time frame otherwise it will switch to 'normal' bootloader mode.
That's it!
NOTE:
Do not wonder! You won't be able to read the SD card afterwards on a Windows computer - I just tried it. I guess the procedure above formats the card in a special format, at least Windows tells me that the card is not formatted! So, the draw back is that you can't use the card for other stuff but the ROM IMAGE!
Very nice article. A couple of typos, but overall very well written!
Just out of curiosity, I've seen another thread on making an SD image of a rom, but it indicates you have to be CID Unlocked for it to work. Is that true for this method also (I haven't compared the two)? Just curious as that is an important piece of information (either way) to make note of... So if someone with a CID Locked phone could try this, that would be great.
Also curious if this works for G3 and G4 devices.
I can't try it out on a CID locked device since mine is CID unlocked already!
The guide above is for real HTC technicans, so, I guess it should work either way!
If somebody has a still CID locked device: it would be great if you could give it a shot!
Does this uittlity make a ROM image as the OS is NOW (meaning with all tweaks and installs and everything) or just the basic ROM as you would get with a hard reset?
It is not a backup. It will put the factory ROM on SD card.
The actual image with all your 'tweaks and personalization' can be easily backed up to SD card by using SPB Backup or better SPB Clone.
Does this method work for wm6 ROM?I am a vista user
Not sure if the MTTY can connect from VISTA but in gerneral: it should work with any ROM version on your WIZ.
well,can we place our .nbf image file (wm6) on sd card and install it from the sd card?
Not this way! It will create a special formatted FLASH IMAGE from your installed ROM on SD. When you do it you won't be able to use the SD card for data storage until you reformat it again.
I am not sure if somebody came up with a solution for flashing nbf files directly from SD!
The procedure above is still helpful if you just need a backup of your shipped ROM or if you need to reflash an almost dead WIZ or if you have the need to reflash your WIZ on the go without a computer ...
Hi
I have a frozen **** brick which got stuck while upgrading (Dopodp800w) I tried to flash it thru sd card (which containes original nbh file in my doc folder).
When I try to invoke the bootloader it says "searching for sd card" then goes to 3 color band and nothing else happenes
Can you help me
Edit: Working like a champ.
But you need to edit the one in the topic. It dose not work. The one in the screen shot dose.
Thanks.
A couple of questions
Junner2003 said:
NOTE:
Do not wonder! You won't be able to read the SD card afterwards on a Windows computer - I just tried it. I guess the procedure above formats the card in a special format, at least Windows tells me that the card is not formatted! So, the draw back is that you can't use the card for other stuff but the ROM IMAGE!
Click to expand...
Click to collapse
Great finding Junner!
Can I use "your" rom image to flash "my" phone? Or the image is unique for the one you got the image from?
Could you please investigate with your HTC Technician if this process is valid for both G3s & G4s?
Thanks!
Basically you will be able to use it on any phone!
My problem is that I only had 2 test devices: an European T-Mobile MDA VARIO and a 8125 from Cingular / USA. I could use one and the same image (SD card) on booth devices.
I have no CID lock and also no SIM lock on both devices, so, I can't give you a feedback on what happens if your device is locked.
Maybe somebody else has still a locked device and is willing to give it a try before unlocking? (But please somebody with experience! I won't be responsible if you brick your device! )
Is there any way I can take the Flash Image from the SD and convert it to nb file?
WizeMan said:
Is there any way I can take the Flash Image from the SD and convert it to nb file?
Click to expand...
Click to collapse
Hmmm, you would have to figure out first in what format the SD card is formatted. Afterwards you might be able to find an application which can extract the file(s) from the card.
I did not want to digg deeper than I had to, it was only importand to me that I can flash from SD when ever I cross the ocean from USA to Europe. That saves me a lot of 'setting up's' ... ... just flash and load backup!
Not working on CID locked
Junner2003 said:
Basically you will be able to use it on any phone!
My problem is that I only had 2 test devices: an European T-Mobile MDA VARIO and a 8125 from Cingular / USA. I could use one and the same image (SD card) on booth devices.
I have no CID lock and also no SIM lock on both devices, so, I can't give you a feedback on what happens if your device is locked.
Maybe somebody else has still a locked device and is willing to give it a try before unlocking? (But please somebody with experience! I won't be responsible if you brick your device! )
Click to expand...
Click to collapse
I tried in a G3 & also in a G4, both CID locked 8125´s. It didn´t work, see attached file for the message I got; looks for me that the CID unlock gives the proper security level to do make the command work. I´ll unlock one of them to see if the result is a different one.
Hello everybody,
2 days ago i flashed the dutty r5 NOR by accident, should have been NLD.
I cannot understand NOR whatsoever so i tried to re-flash my phone with the NLD version, but when i go into bootloader mode it cant find the image file. Im sitting at 90% battery charge.
What i do:
1) USB connection between phone and pc.
2) Copy + Paste the TOPAIMG.NHB in my storage card.
3) Disconnect USB between phone and pc.
4) Power off the phone (by holding the power button and press yes)
5) Press and hold volume down button and the power button
6) I see a rainbowscreen with the specs i persume from my phone
7) for 0,5 sec, i see the following:
Loading...
No image file!
8) Rainbowscreen again, and on the bottem 'serial' in the white color.
What did i do wrong? It should work..
Its very annoying to have a phone in a language you dont understand
Thanks in advance
J-r0en
Edit:
Currently i cant flash through my pc with active synch connection because my laptop is back to the factory for repair.
Cant find the Cd that came with the phone to install windows mobile device center, which is for vista+ , and this pc is xp professional. :\
2) Copy + Paste the TOPAIMG.NBH in my storage card.
Further try formatting your SD-card with FAT32. That in combination with renaming your file to the right extension, should work.
Thanks for the response.
I made a typo in the openingspost.
The image file on the storagecard is TOPAIMG.NBH.
I flashed the current ROM via the storagecard so it should
be fat32. I'll try to reformat the storagecard and see what happens.
*thumbs up*
It didnt work, any other ideas ?
my original rom was in another language, maybe that aint allowed? to flash a new rom in a different language.
True, unless you have HSPL this won't work.
Yes i am aware of that. I already have HSPL installed on my phone, as i've done phone flashing on via my storage card before.
I re-installed HSPL, just to try , but it still doesnt work
J-r0en said:
Yes i am aware of that. I already have HSPL installed on my phone, as i've done phone flashing on via my storage card before.
I re-installed HSPL, just to try , but it still doesnt work
Click to expand...
Click to collapse
TOPAIMG.NBH
No typo? All capitals? Sorry, just making sure...
BumAround said:
TOPAIMG.NBH
No typo? All capitals? Sorry, just making sure...
Click to expand...
Click to collapse
Nope, no typo's, "TOPAIMG.NBH" just like that =p
Have you tried TOPAIMG.nbh (lower case .nbh)?
I had the same issue flashing the original 6.5 OEM flash and Dutty's.
I have a 16GB card. I think that may be the issue. Perhaps 8GB or less will be recognised.
Anyway. All I did was use the wrapper method.
I booted to HardSPL and then connected it to the PC, ran the wrapper file included with the firmware and went through the modified firmware wizard on the PC and all sorted
- Geoff
In case anyone else comes across this thread while having this problem...
I had the same problem with my Rhodium. The problem disappeared when I switched from formatting that particular SD card with FAT to FAT32.
So, try FAT32 and see if that helps!
Finally!!!! took me forever to fix this. So my problem was the same, after flashing a custom ROM thru RUU, I got stuck in the splashing screen and kept getting "No image file" in HardSPL. So my solution was "SWITCH my FAT32 8GB microSD with a FAT32 4GB microSD". That's all! hope this will help someone else too.
Happy New Year!!!
Well i didnt fix it, still didnt flashed the rom that i wanted (in dutch) but i went back to WWE, that díd work.. eventually