I have tried everything under the sun to upgrade my T-Mob PPPC/PE with Yorch's T-Mobile unofficial Upgrade to WM2003. I can't get it to work. Tried: loading ROM to SD card and soft reset, using XDATools OSImagetool, etc... :x
I believe it is tough for any one to advice if you don't state what exactly you did and what error messages you got .....
Are you trying bootloader method. or other method. Please present more detail regarding your problem including current rom/radio etc and things that you have tried already.
Sorry. First, loaded the file, NK.NBF onto my SD card using OSImagetool.exe. Then per instructions that were given to me, did a soft boot on the device. It simply rebooted and after it came up, there was a message on the screen asking my if I wanted to format the SD card for use with the device and telling me that if I hit "yes", the card would be erased and all data lost on the card.
The next thing I tried was to use OSImagetool.exe directly. Source- nk.nbf (on my desktop) and Destination: Device memory (via Programme A). The error I got was "Programme A not found - run with "--register" error opening target device.
I even tried to run OSImagetool.exe from the command prompt using --register as an argument and got the same exact error.
Then, I loaded the NK.NBF file to the SD card then ran OSImagetool with source: SD card, destination: Device memory. Then got the same error: "Programme A not found - run with "--register" error opening target device."
Hope that helps.
i dont know the program OSImagetool
but when i updated my xda to 2003 i used xdatools to transfer the rom to the sdcard and then i DIDENT! softreset but went into the bootloader and it started to update
Rudegar said:
i don't know the program OSImagetool
but when i updated my xda to 2003 i used xdatools to transfer the rom to the sdcard and then i DIDENT! softreset but went into the bootloader and it started to update
Click to expand...
Click to collapse
They are the same program OSImagetool is just the name of the .exe file.
@jhug whats your bootloader version? Sounds like it might be 5.17 or newer!
HTH
When the xda asked you if you wanted to format the sd card you should answer no, it means the rom has in fact been written to the card, you then need to enter bootloader mode, a soft reset is no good, just push the stylus in the reset hole while holding down the power button, it will then ask you to push the action button which is the centre of the 4 way pad, your rom will then be programmed, make sure the battery is charged also. When the process is complete, unscrew your stylus, then insert the top half of the stylus in the hole on the bottom right of your xda, just push once, after one minute push again, this turns the battery off, then on again, you should then have a working system.
my bootloader is 5.22 btw
I wanted to check and see if the ROM was in fact on the SD card, so I did a soft reset and the notification came up and asked me if I wanted to format the SD card. I clicked no and assumed the nk.nbf file was on the card. I then did a soft reset while pressing the power button and went into bootloader mode. It did not ask me to push the action button, so I did anyways and it went into diagnostics mode. Ideas???
I'll try reloading the ROM on the SD card and try it again. I'll keep everyone posted. Thanks for your help! BTW, bootloader version is 5.15.
Rudegar said:
my boot loader is 5.22 btw
Click to expand...
Click to collapse
Consider yourself luck if you haven't had any problems upgrading
using the SD card boot loader method then!
Also most of the RS upgrade failures that I seen / fixed and tried to fix had boot loader 5.17 or higher, so keep that in mind. :wink: Lucky, Lucky you!
jhug said:
I'll try reloading the ROM on the SD card and try it again. I'll keep everyone posted. Thanks for your help! BTW, bootloader version is 5.15.
Click to expand...
Click to collapse
Please do!
Also whats the size and make of your SD card?
Well, I tried it again and the same thing happened. It went into bootloader mode and did not ask me if I wanted to install the new OS. I tried pressing the volume button and it said to connect the USB cable. I also pressed the contacts button and it went into Diagnostic mode. Aaaaaarrrrrgh!
BTW, it's a 256MB Sandisk card. (Great for holding about 200 songs! :lol: )
jhug said:
BTW, it's a 256MB Sandisk card. (Great for holding about 200 songs! :lol: )
Click to expand...
Click to collapse
Some how I knew you where going to say a "256MB Sandisk"!
For some unknown reason had the same problem using the same card,
if you can try using a 64MB or a 128MB card and see what happens. :wink:
HTH
It finally worked! I loaded the ROM to the 256mb Sandisk SD card while in the unit, removed the SD card, inserted the SD card, then did a warm boot while pressing the power button and the ROM image loaded! I did the usual battery cutoff and then rebooted it and it works fine. Thanks everyone who gave me advice with this. :lol: :lol:
Where there is a well there is a way, great job!
But how in the hell did you figure that one though? :wink:
I decided to get creative. Dangerous when you're working in Wallaby, but it worked! :shock:
Related
Hello,
can someone please help me?
Needed to unlock my XDA goes nobody could do it here ;-(
Crashed in the upgrading screen:
it wil take about 5 minutes ....
Has Wallaby Bootloader V5.15
I have already a ROM file NK.nb1 file from the ROMkitchen,
but i don't know how to get it working on my messed up XDA.
Have read a lot in this forum but really don't know much about programming ;-(
is it possible to make a copy from my working XDA (with XDAtools) and then replace the NK.nb1 file or something? and how can i get it into it?
read a lot about Bootloader but sorry don't know how to handle ;-(
If someone could help me -> THANKZ
Greetingz from Holland,
Marco
ok...
if you dont have an SD-CARD reader, get one!
then, from ROM UPDATE FORUM, find and download XDA TOOLS.
RUN xda tools.
it will ask you for source, (most likely C:\program files\RUU\ENGLISH)
and will ask for destination, since xda dont work, use SD READER
Start Copying to card
when done, insert card into xda
reboot via bootloader ( thats when you powerup with on/off button pressed and soft reset)
IT should detect that there is a system on the card, and ask if u want to install it.
press the ACTION button for yes. (thats the big silver button between the fone buttons)
thats realy IT
if you need more help... email me, or better yet add me to MSN messenger, if u have one. i'll walk you thru it.
thanks to a great warranty, i've practiced and tested alot of xda's
but now that i mastered it ( i think) i stuck to one
Thankzzzzzzz
It worked
Was a little late so i didn´t do it wright myself
Copied the file to SD
instead of doing it with XDA tools to SD
Works now fine.
Had some trouble with GSM and T/mobile card, but copied with XDA tools from working XDA to SD and now it works.
Keep this file on an SD card so now i can try to load ROM´s or upgrade to 2003 cause i can always put it back, so no risk!
Thankz Again,
Greetz Marco
I created one nb1 file using Jeff's kitchen, use XDATools write it to a SD Card, slot it into my XDA, press on/off button + soft reset key, bootloader screen (wallaby bootloader v5.17) appear, and say 'GSM OK', if press Action Key now will bring me to "Diagnostics" menu, if press Calendar key bring me to "Utilities" menu, if press Contact key bring me to "Flash Tools" menu, and if press Record Key bring will me to "USB Flash Mode", it didn't auto detect the SD card to allow me to flash my device, may I know where have I done wrong, anybody help? Thanks!
Sounds like the ROM imaged didn't make it to the SD card.
Do this test and report back on your results.
With the SD card still in the slot do a soft reset, if the image is on the card
your XDA should ask if you want to format the card.
HTH
It did ask me whether want to format the SD card.
Ok give it another shot but this time try using XDArit 1.0 to right to SD.
For more info. on XDArit visit: http://www.xda-developers.com/XDArit/
XDArit version 1.0 can be download from the software section at:
http://www.yorch.net
Just in case here is my how to use XDArit to write nk.nb1 or nk.nbf to your SD card (aka the Bootloader Method!)
1. Place XDArit and the nk.nb1 or nk.nbf file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
Notice that the Windows CE box is already checked so just click the browse button at the end of that window.
4. Select your (nk.nb1 or nk.nbf) image and then Open
Notice by default XDArit will open looking for a *.nb1 file but if you’re going to use a .nbf file you’ll have to manually change the “Files of Type” to *.nbf
Notice that nk.nbo / nk.nbo was automatically added as your boot-loader and its check box is unchecked so leave it that way and click OK. XDArit should start writing to the card.
When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset. You’ll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
HTH
&
Good Luck
Hi Qman, I followed exactly your instruction, but still the same wallaby bootloader screen, I can't see any sd download screen???
Sorry to hear that, I'm not to hip on wallaby bootloader v5.17 but
it works just with wallaby bootloader v5.15 works!
HTH
Thanks you for your prompt reply, btw is there anyway to downgrade the bootloader to 5.15?
ycneosg said:
Thanks you for your prompt reply, btw is there anyway to downgrade the bootloader to 5.15?
Click to expand...
Click to collapse
many ways to download bootloader to 5.15!
read the old threads you will see how!
Hi Guys,
I need your help .
I've downloaded the 4.00.16 ROM by mistake, it really didn't tell the ROM number, so now I want to revert to a earlier one and I can't.
I've got the following message: "ERROR: GetDeviceData - An established connection was aborted by the software in your host machine.
error getting devicedata" and then "ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR. Cannot execute the remote communication program. Please make sure that the USB/Serial cable is properly connected."
PLEASE HELP ME, I'M REALLY STUCK NOW AND DON'T KNOW WHAT TO DO...
use SD to restore your system if you have backup!
if you still have problem to get your phone life back, send to me I will fix it for you!
I forgot to tell you, I haven't got SD :evil:
I've been using .EXE
ritmo-unido said:
I forgot to tell you, I haven't got SD :evil:
I've been using .EXE
Click to expand...
Click to collapse
Wow!
I could help you to fix it, if you send it to me!
similar situation but somewhat different.
I cooked a rom in kalex kitchen and wrote it to my sd card with my t-mobile pocket pc phone connected to activesync. I then flashed the phone from the sd card but got a checksum error at the end. I did a hard reset but only got a blank screen. Right now I can access the bootloader but that's it. I don't have a good backup rom because (not thinking) I wrote over it with the rom from kalex kitchen figuring it would become my backup (it must have somehow been corrupt). I tried writing the rom I previously had on my phone to an sd card directly through a card reader on windows 98, windows XP and windows ME all with no success. Thus, I'm dead in the water. I have no clue why I can't flash to the card reader. I went through a ton of posts here but have not found the answer yet to get me back working. Does anyone have any ideas on this? I have no clue why xdatools and xdarit are not working (especially on XP - I know they should not work directly to an sd card on windows 98 but I tried anyhow out of desperation). Please help.
got it working
used xdarit on another pc running windows xp and successfully wrote the rom to the sd card using my card reader. i then flashed my phone using the bootloader method and i'm up and working again!
hello,
i'm using the xdatools to put the nk file on the SD card, but when i hard reset my xda, i get into bootloader 5.22 mode, it says "gsm ok", and when i press the action button i get into a test menu.
How can i load the nk file from my sd card? please help.
thanks guys.
Did you place the ROM on the SD card by browsing to your device (...) or using the drop down and choosing your SD reader or XDA SD slot?
I had the same problem until I used the drop down... if you browse to your card, XDA tools will not create a bootable SD.
i used directy dropping down the box to SD
When you use the drop down menu on the destination there should be a drive letter next to your card eg: F: 59.60M USB sd reader or similar, choose that and it should work.
do we soft reset or hard reset
well after loading nk.nbf file
do we soft reset or hard reset to get into bootloader.
also,
the drive letter in destination folder will come if u use card reader,
but if in expansion slot than it does not give the drive letter.
Hello
I did hard reset .
I am having this same problem...
I download to the SD card through the cradle, using the phone's expansion slot. I do a SOFT RESET, to get the bootloader, and all I get is a GSM OK message. If I hit the action button, I then get into the test menu.
Hello
Means you have no nb.1 on your SD card .
as per the instructions I've been following that have been listed in detail here on this site as well as the att siemens support forums, you are supposed to copy the nk.nbf file and use that with the OS Image tool...is this incorrect?
OSImage
I just installed new ROM from new ROM Kitchen .
http://lumpistefan.dyndns.org/
1) Get the file on your desktop ( download or ...I do not care)
2) Open OSInage
3) Source :arrow: Brows to your file
4) Destination :arrow: your SD card (where is it :?: -on your phone
or on the SD card reader)
5) Copy the file to SD card (takes 20 seconds)
6) Remove the XDA from the cradle and soft reset with power button held in.
7) When it says press action to download, push the big button between dial and hangup.
8) Hard reset.
9) Injoy the rest of your day
No way getting SD-Card recognized
Hello,
i have the same problem, the ROM (Made with xda-tools or XDArit) on sd-card is not recognized to download when i boot into bootloader!
I found no way to get this running.
Any ideas?
read this thread: http://forum.xda-developers.com/viewtopic.php?t=3274
most likely, your wallaby bootloader is not 5.15. Anything above 5.15 won't work. I could downgrade from 5.17 and 5.22, but not from 6.22
still awaiting for some help to down grade 6.22. Nobody seems to care. THis forum has become "too" big that it is not as effective as before ...
People tend to just "shout" and ask before digging deep enough...
too many people posting the same questions into different threads again and again
andhy said:
read this thread: http://forum.xda-developers.com/viewtopic.php?t=3274
most likely, your wallaby bootloader is not 5.15. Anything above 5.15 won't work. I could downgrade from 5.17 and 5.22, but not from 6.22
still awaiting for some help to down grade 6.22. Nobody seems to care. THis forum has become "too" big that it is not as effective as before ...
People tend to just "shout" and ask before digging deep enough...
too many people posting the same questions into different threads again and again
Click to expand...
Click to collapse
I'm in the same situation - I have v6.22 on T-Mobile 4.01.00ENG and can't do anything, even with an SD card!
Even the BootLoader downgrade tool with XDATools doesn't work.
Any help with this would be appreciated by many other users in the same situation.
The downgrade batch file in XDA-Tools doesn't work for a lot of people (didn't work for me either). However the wallaby patch should work. Otherwise, use XDARit to downgrade the bootloader using the .nb0 file that comes with the downgrade batch in XDA-Tools.
You write the wallaby patch onto the SD card using XDARit, go into the bootloader and enter diagnostics. Then take the SD card out, write bootloader 5.15 onto the card using the bootloader option in XDARit, and place the SD card back into the device. Then from the patched diagnostics screen select Restore SD and it will recognize a bootloader update. I'd recommend saving your original bootloader from the diagnostics first, but that wouldn't work for me for some reason.
i had a 5.17 boot loader that i downgraded to 5.15 via OS image tools, i also downloaded a rom file from the Kitchen & wrote it on SD but i still can't load from SD & i only get the test phase thing
i also downloaded a rom file from the Kitchen & wrote it on SD but i still can't load from SD & i only get the test phase thing
Click to expand...
Click to collapse
Try using XDRit instead of XDA-Tools (use the older version of XDRit instead of the newer version). I'm not sure what you mean by "test phase", but maybe your bootloader screwed over during the update? If so you may need to rectify that first, but that's definately beyond me. If you burn the image correctly onto the card it should pick up automatically as soon as you enter the bootloader with 5.15. If you don't burn it correctly then it won't be picked up.
I'm just throwing in my 2c because I've made all this stuff work with a 5.15 downgrade. There's a possibility the thing simply doesn't like your card too, so try a different 64MB SD.
well i do have a 256 mb card & as far as i can tell the downgrade worked fine, now to use the xdarit files to i need to have the SD reader or i can do it the same way i do in XDAtools which is directly into the card through Active Sync
hi,
well i tried to upgrade my xda1 to windows 2003,
here is the description of the problem i m facing....
i used xda tools(osimage tool) to transfer nk.nbf file to my sd card-> go into bootloader(wallaby bootloader 5.17)
->says gsm ok and starts taking test(like tap test, recording test, sd card test etc) which it should not...
and is not loading the os software. (getting stuck in one of the test like sd card test)
well following things i tried:
1. transfered nk.nbf file, tried both from siemens site as well as from yorche.net site--->both giving same problem.------->using xdatools.
2. tried loading the sd ,tried both destinations -->xda slot and as well as the card reader.
3. using drop down only to choose the destination.
4. also after loading sd the current rom asks to format (which means sd is loaded properly)
5. initially it was not loading the bootloader then i fixed it using xda tools , after that i started getting wallaby bootloader 5.17
6. now after going to bootloader it starts taking various test and shows no sign of loading the new os.
--------------
now i have moved as per the instruction and tried everything mentioned above to install wk3 but all in vain....
dont know where the problem seems to lie....
need suggestions desperately...
--------------
current rom:3.17.03
stack:4.21
--------------
current rom working ok.
--------------
maybe it's a problem with the nbf file content ... did u try burning the nbf file directly to the ROM using the XDAtools ?
You arent hitting any other button when entering bootloader are you? Just press the stylus in reset while holding power, it shouldnt go into test mode unless another button is pushed, maybe you have a button stuck or something.
any more suggestions............
well if burning means choosing source to nk.nbf and destination to drop down
to sd card using xda tools then yes i did burning....
also i m sure no other buttons are pressed or thing like that....
any more suggestions............
I meant by burning to make the destination to be the XDA flash ROM
any more..
ya i tried burning to.,...
same problem.
can your sdcard reader read whats on the sdcard (it's not suppose to be able to read after it's been flashed with the rom)
also are you 100% sure that your nbf file is valid ? maybe it's broken
more suggestions ....
well after loading sd card , i cant browse to read it, moreover xda asks to format, which is the sign that card is loaded ok.
secondly i have tried nk.nbf file from siemens as well as yorche.net,
both should not give same problem, which it is.
this mention the 5.17 bootloader you should read it
http://wiki.xda-developers.com/wiki/WallabyBootloader
Rudegar said:
this mention the 5.17 bootloader you should read it
http://wiki.xda-developers.com/wiki/WallabyBootloader
Click to expand...
Click to collapse
The best way that I've found is to find somebody with a XDA that has the 5.15 bootloader then do a CE+BOOT TO SD then do a SD restore.
Sounds like a good project for some of the ROM Kitchen owners doesn't! :wink:
Hi all,
I have been reading your post in your forum for days. I noticed that there are post on how to re-install the Imagine from the bootloader but none really telling how to do it.
I know i'm supposed to write the OS image on an SD card plug it into the O2 XDA and reboot, but i don't know how to write the ROM image to the SD card. I have a SD writer/reader attached to my PC and I have a 64 MB SD card. Can someone please write about the procedure of getting an OS ROM back on to the PDA with only the bootloader? I can't use Activesync.
Thank You all!!!
You have to use the XDAtools.
Download and installl them. Then right click on the image to write an select write to sd.
After finishing writing on the SD insert the card in your device press the power button and stick into the reset button. After releasing the reset and the power button, the bootloader will come up. It will show you the message OS detected on the card press the action button to download. Press on the button and the image is going to be transferd to your device. Afet finishing, you have to do a cold boot. That's all...
HTH
Stefan
Thank you but.....
Hello Stefan,
Thanks for your kind help!! Just wanted to make sure.
1. I got the XDAtools and installed it.
2. I run the OSimageTool, and i get a form with 2 fields. (destination and source)
3. I can just click on the button with "..." to select a file such as "NK.nb1" as source, then destination can be my SD card drive.
so in conclusion, I copy this one image(file) to my SD card. Stick in my SD card and follow your instructions and it should work right?
Please advise,
Thanks again man for the advice.....
Chad
Yep.
That's all you have to do....
Stefan
Problem upgrading from SD-Card
Hello,
When i write a new rom on my SD-Card with OSImagetool or XDArit and insert it into my device, starting bootloader the new rom is not recognized by my device. (There is no upgrade dialog)
Bootloader 5.22, XDA
This is a known situation Bootloader 5.22 will not download rom via SD card. My suggestion is to downgrade your bootloader to 5.15 or thereabout. You can find how in this forum.
No SD-Card Update
Thx
but when i save my "corrupt" ROM via Bootload to SD an do an reboot, the update will be recognized! When i take out the card an reinsert it into the device the update will not be recognized!
Sounds like a crazy problem?
How can i downgrade my bootloader
How can i downgrade my bootloader without having an running OS?
And without getting my SD-Card recognized?
THX
Hi,
My Imate JAMin is dead after trying to flash the ROM with the QTEK S200 ROM using awizard. Anyways my phone will not connect to PC when I try to downgrade to the original ROM file (the JAM_WWE...exe). The problem is my PC wont connect to my phone, I get error 240 or something similar (cannot connect to phone message). So what I am asking is if anyone can backup their Imate JAMin ROM to a SD card and upload the image for me. I figure somebody here has got to have an extra SD card lying around somewhere. It would be greatly appreciated. Thanks in advance.
Hi,
If you tell me how to make a SD image I will make one for you.
thanks for offering help. I am out right now, when i get home i will do a search and find out how to do it. In the meantime if anyone has any links for backup rom image to sd for wm5 and how to save this image to a file and then to write the image file to sd card again. thanks again.
thanks for offering help. I am out right now, when i get home i will do a search and find out how to do it. In the meantime if anyone has any links for backup rom image to sd for wm5 and how to save this image to a file and then to write the image file to sd card again. thanks again.
ok got some links for backing up to sd card and writing the image to file:
http://forum.xda-developers.com/viewtopic.php?t=32866
There are instructions on the 7th post in this thread.
http://forum.xda-developers.com/viewtopic.php?t=43399
This one has instructions on the 8th post.
Thanks
jeeb75 said:
Hi,
My Imate JAMin is dead after trying to flash the ROM with the QTEK S200 ROM using awizard. Anyways my phone will not connect to PC when I try to downgrade to the original ROM file (the JAM_WWE...exe). The problem is my PC wont connect to my phone, I get error 240 or something similar (cannot connect to phone message). So what I am asking is if anyone can backup their Imate JAMin ROM to a SD card and upload the image for me. I figure somebody here has got to have an extra SD card lying around somewhere. It would be greatly appreciated. Thanks in advance.
Click to expand...
Click to collapse
1. Put the phone in bootloader mode (make sure battery is over 50% charged).
To do this, press the Camera button down, hold it there, and press soft reset. Let off the soft reset button BUT continue to hold the camera button down until you see 4 color bands on the screen. Let go of the camera button when they appear.
2. Connect USB cable to PC.
3. Re-run imate JAMin full flash .EXE file. Should work fine and get you back to normal.
jaxf250 said:
jeeb75 said:
Hi,
My Imate JAMin is dead after trying to flash the ROM with the QTEK S200 ROM using awizard. Anyways my phone will not connect to PC when I try to downgrade to the original ROM file (the JAM_WWE...exe). The problem is my PC wont connect to my phone, I get error 240 or something similar (cannot connect to phone message). So what I am asking is if anyone can backup their Imate JAMin ROM to a SD card and upload the image for me. I figure somebody here has got to have an extra SD card lying around somewhere. It would be greatly appreciated. Thanks in advance.
Click to expand...
Click to collapse
1. Put the phone in bootloader mode (make sure battery is over 50% charged).
To do this, press the Camera button down, hold it there, and press soft reset. Let off the soft reset button BUT continue to hold the camera button down until you see 4 color bands on the screen. Let go of the camera button when they appear.
2. Connect USB cable to PC.
3. Re-run imate JAMin full flash .EXE file. Should work fine and get you back to normal.
Click to expand...
Click to collapse
Thanks for your help. I tried that before 5 times and the phone would get stuck on the boot splash screen. Now I cannot even get the phone into bootloader mode anymore unless it is plugged directly into the outlet. I do not know why it is doing this. I have charged the battery all the way. I also have a magician so I have tried 2 different batteries charged all the way. Since I can only get the bootloader mode while it is plugged directly to the wall, I cannot connect it to the pc. I have no idea why it is doing this. I just want to try restoring from an SD card rom backup before I send it in to imate.
I have made a sd image from my ROM and uploading it now. It's about 54 MB. I also tested to flash my Imate with this card and it works good. When you enter bootmode with the sdcard inserted it asks if it should restore from card. At this point press the comm manager button (the button under the volume control).
It's a image on a 128 MB SD card. You just have to write the image to your card with ntrw.
Good luck and let us know the results!
swartb said:
I have made a sd image from my ROM and uploading it now. It's about 54 MB. I also tested to flash my Imate with this card and it works good. When you enter bootmode with the sdcard inserted it asks if it should restore from card. At this point press the comm manager button (the button under the volume control).
It's a image on a 128 MB SD card. You just have to write the image to your card with ntrw.
Good luck and let us know the results!
Click to expand...
Click to collapse
Thank you so much!!!! I really appreciate it. I just hope it works. If it does not work for me at least others can get this sd image to fix their prophets in the future if they cannot get it to connect to their PCs. I will let you know my results.
Do you know if the device has to be unlocked already or can you use this to get around the CID lock?
The SD card flash did not work for me. I was hoping the RGB color screen was the bootloader but it was not. I guess there is something wrong with my JAMin so I am sending it in to imate in the middle east. I would like to thank Swartb for taking the time to get the ROM image on SD card.
To answer the CID lock question, I think it does not bypass it so if you want to use the SD card to restore it has to be the same phone model so in this case the JAMin.
Hi!!!! could you tell me where is that SD copy of your ROM????
Thnaks!!!!!!