Database Users

HELP!!!

I have tried everything under the sun to upgrade my T-Mob PPPC/PE with Yorch's T-Mobile unofficial Upgrade to WM2003. I can't get it to work. Tried: loading ROM to SD card and soft reset, using XDATools OSImagetool, etc... :x

I believe it is tough for any one to advice if you don't state what exactly you did and what error messages you got .....

Are you trying bootloader method. or other method. Please present more detail regarding your problem including current rom/radio etc and things that you have tried already.

Sorry. First, loaded the file, NK.NBF onto my SD card using OSImagetool.exe. Then per instructions that were given to me, did a soft boot on the device. It simply rebooted and after it came up, there was a message on the screen asking my if I wanted to format the SD card for use with the device and telling me that if I hit "yes", the card would be erased and all data lost on the card.
The next thing I tried was to use OSImagetool.exe directly. Source- nk.nbf (on my desktop) and Destination: Device memory (via Programme A). The error I got was "Programme A not found - run with "--register" error opening target device.
I even tried to run OSImagetool.exe from the command prompt using --register as an argument and got the same exact error.
Then, I loaded the NK.NBF file to the SD card then ran OSImagetool with source: SD card, destination: Device memory. Then got the same error: "Programme A not found - run with "--register" error opening target device."
Hope that helps.

i dont know the program OSImagetool
but when i updated my xda to 2003 i used xdatools to transfer the rom to the sdcard and then i DIDENT! softreset but went into the bootloader and it started to update

Rudegar said:
i don't know the program OSImagetool
but when i updated my xda to 2003 i used xdatools to transfer the rom to the sdcard and then i DIDENT! softreset but went into the bootloader and it started to update
Click to expand...
Click to collapse
They are the same program OSImagetool is just the name of the .exe file.
@jhug whats your bootloader version? Sounds like it might be 5.17 or newer!
HTH

When the xda asked you if you wanted to format the sd card you should answer no, it means the rom has in fact been written to the card, you then need to enter bootloader mode, a soft reset is no good, just push the stylus in the reset hole while holding down the power button, it will then ask you to push the action button which is the centre of the 4 way pad, your rom will then be programmed, make sure the battery is charged also. When the process is complete, unscrew your stylus, then insert the top half of the stylus in the hole on the bottom right of your xda, just push once, after one minute push again, this turns the battery off, then on again, you should then have a working system.

my bootloader is 5.22 btw

I wanted to check and see if the ROM was in fact on the SD card, so I did a soft reset and the notification came up and asked me if I wanted to format the SD card. I clicked no and assumed the nk.nbf file was on the card. I then did a soft reset while pressing the power button and went into bootloader mode. It did not ask me to push the action button, so I did anyways and it went into diagnostics mode. Ideas???
I'll try reloading the ROM on the SD card and try it again. I'll keep everyone posted. Thanks for your help! BTW, bootloader version is 5.15.

Rudegar said:
my boot loader is 5.22 btw
Click to expand...
Click to collapse
Consider yourself luck if you haven't had any problems upgrading
using the SD card boot loader method then!
Also most of the RS upgrade failures that I seen / fixed and tried to fix had boot loader 5.17 or higher, so keep that in mind. :wink: Lucky, Lucky you!

jhug said:
I'll try reloading the ROM on the SD card and try it again. I'll keep everyone posted. Thanks for your help! BTW, bootloader version is 5.15.
Click to expand...
Click to collapse
Please do!
Also whats the size and make of your SD card?

Well, I tried it again and the same thing happened. It went into bootloader mode and did not ask me if I wanted to install the new OS. I tried pressing the volume button and it said to connect the USB cable. I also pressed the contacts button and it went into Diagnostic mode. Aaaaaarrrrrgh!
BTW, it's a 256MB Sandisk card. (Great for holding about 200 songs! :lol: )

jhug said:
BTW, it's a 256MB Sandisk card. (Great for holding about 200 songs! :lol: )
Click to expand...
Click to collapse
Some how I knew you where going to say a "256MB Sandisk"!
For some unknown reason had the same problem using the same card,
if you can try using a 64MB or a 128MB card and see what happens. :wink:
HTH

It finally worked! I loaded the ROM to the 256mb Sandisk SD card while in the unit, removed the SD card, inserted the SD card, then did a warm boot while pressing the power button and the ROM image loaded! I did the usual battery cutoff and then rebooted it and it works fine. Thanks everyone who gave me advice with this. :lol: :lol:

Where there is a well there is a way, great job!
But how in the hell did you figure that one though? :wink:

I decided to get creative. Dangerous when you're working in Wallaby, but it worked! :shock:

Cannot flash from sd card but can flash from USB

Hi i have flashed my HD2 from a sd card for more than 30 times but now I am unable to flash using my sd card.
I get into the boot loader mode with leoimg.nbh on sd card, but in the bootloader mode white colored loading screen appears for some fractions of a second and returns to tri color screen.
I was using Ozrom on the device last when i discovered this problem.
spl - 1.42.hspl
cotullahspl
Please help...
Sorry for my bad english.
Also I had already done alot of searching but could not find anything...
Update :
Now i cant flash from usb also. First I was able to flash from usb but now I cannot.
-Tried using a new sd card and formatted with fat32 file system. Problem still exists...
-Checked the file name and extensions its not "leoimg.nbh.nbh".
-Tried flashing just leoimg.nbh on card
-tried flashing with 5 different roms from different cooks
-tried renaming the file to capitals LEOIMG.nbh
-updated the hspl to hspl2 2.08
Problem is not solved.

There may be a problem with the sd card. Are you still using the same card you have used before? If so, try formatting the card (FAT32) or try a different sd card if you have one.
You can of course continue using usb, sd card flashing is only really needed in order to remove hspl.

Maybe is your card corrupted, try to format it in FAT32...

Tried using a new sd card and formatted with fat32 file system. Problem still exists...

Mate, you only need to flash from sd card when you cant flash from usb. I dont know why you are getting this error but dont worry too much. Did you name the file correctly (leoimg)? It's easy to make a mistake here. Some people rename the file to leoimg.nbh - you dont need to add the .nbh. It's already an nbh file - so you would end up with leoimg.nbh.nbh
Lastly dont flash a 2.10 rom via sd card or you will end up stuck with an spl that you cant change

i know about the file extensions and file names...i am flashing since 3 years from memory card....i am not a newbie..tell solutions other than the problems occured to noobs...like rename error..format memory card stuff...i want some solution other than that..
thanx alot for your support its really appreciated...looking forward for your help..hope now this time you can divert me in the right direction
also i have work of travelling so i have to flash my phone sometimes on the go
Regards

ankush1492 said:
also i have work of travelling so i have to flash my phone sometimes on the go
Click to expand...
Click to collapse
sorry but thats lol... shouldnt u be using phone on bussiness trip instead of messing with it?

i did not said that i have business trips..i travel a lot..so getting bored i start messing with it...LOL

can anyone help me in this???

Same problem
Guys, indicating same problem - SD reformated, still same situation. Tried also re-flash shipped ROM etc., but nothing helped. Doesn't work also on original SD (2 gigs).

does your "loading" screen in your bootloader comes and goes very fast???

ankush1492 said:
does your "loading" screen in your bootloader comes and goes very fast???
Click to expand...
Click to collapse
Try capital letters LEOIMG.nbh etc etc

try install 2.08.hspl, that also happened to me. fixed when i install 2.08.hspl from HSPL2.

tried capital letters LEOIMG.nbh also installed 2.08 hspl2. problem is not solved....

I have this problem as well.... I have hslp2 2.08 I TRY'de IT WITH 3 DIFF SD CARDS 4GB 8GB 16GB fat 32 AND NOTHING!!!!!!! ANYONE knows how to fix this????!?? I have NEVER been able to flash from sd I have a tmo usa hd2 maybe using task29 could fix it but it doesNT!!!
aby help PLEASE

Please xda. This problem may arise and annoy many users. so please help so that we can find some solution..

problem still exists can anyone help?

I always used to flash my diamond from internal storage when i had it. Got my HD2 and carried on flashing from SD for my first 2 or 3 ROMs and then it stopped working having the same thing as you. As if it tries to read the .nbh then goes back to the bootloader. I havent let it worry me as im nearly always next to a pc when im flashing a new ROM (have to be now), but I would be interested to find the answer as well.

but no one is really interested to reply here peovide a solution.....infact they are advising to flash from a pc...but i want to flash from a sd card

Just keep using USB, less lilkely to go wrong anyway

HELP: will pay for fix that works $.

leo70 said:
Hi. New here. Done this magldr 1.12 and leo70 rom but my phone playing up badly after a lot of droid and 6 and other flashes. I can't install hardly any rom any more without it - ie: stock, wm6, android, wp7 rebooting constantly for no reason etc.
Done mtty and have bad blocks - about 16 and 16 reversed. done task 28 and task 28 55aa, and task 29 as read in other threads. tried everything with different radios, different nand droid. multiple wp7-hd2 installs. but still reboots.
Any thoughts? If go back to stock+spl1.66 and send back under warranty anyone know/think if they will fix it and/or replace it? they still have old sealed replacement hd2 stock or boards much? do they do diagnostics and look at bad blocks properly on warranty return? Even on stock-rom and stock-spl still does this reboot although not as much. Worried that stock-rom wm6 will "work" too well and they won't check blocks. What about task2a? etc? Any way to install wp7/magldr and partition right so no bad blocks counted in?
Thanks very much.
Will pay for fix that works - $.
Click to expand...
Click to collapse
Please someone help/pm me etc - hd2 is flashable and spl'able mag'able but just reboots sooooo badly.

leo70 said:
Please someone help/pm me etc - hd2 is flashable and spl'able mag'able but just reboots sooooo badly.
Click to expand...
Click to collapse
They will replace just flash stock rom and downgrade back to spl by using the hspl flasher, just select the spl. Call tech support and tell them it keeps rebooting and you reflashed stock rom 5 times. They will send you another hd2 and you'll be back in business.
Chris

Step by Step
First I am assuming you are an T-Mobile USA HD2 user.
Disclaimer: THIS WILL RESET YOUR HD2 DEVICE TO STOCK. NO HSPL
If not correct me.
1. www.tmobile.com/wmupgrade (Download the official rom from T-Mobile USA)
2. Once you have downloaded the file, extract the exe using 7z or WinRar. ( Right click on the file and click on Extract to ....) Downlaod Link Attached.
3. Reaname the Ruu_signed.nbh to LEOIMG.nbh
4. Copy the LEOIMG.nbh to your micro sd card, put the file in the root directory. (If the phone sits at the bootloader screen, try a smaller size sd card ex. 2GB)
5. With the phone off , hold the Volume Down while turning the phone on. Once you see the Bootloader sceen you can stop holding the buttons. ( Usually it will recognize there is a Flashable Image on the card, If not try again only this time let go when you see a Loading Message .........)
6. The phone will then prompt you to press Press power or some other button to flash.
7. Once your phone restarts go through the prompts if you want to click finish.
8. Put your device back in Bootloader Mode and Download HSPL3 (Attached Below) Next Put your device back in Bootloader Mode and Flash Magldr 1.12 & Windows Phone 7 ( Sure you know these steps, If not readme file included in the file)
9. Make sure the SD card you plan to use is in the device before you flash Magldr and Windows Phone 7. (Most are claiming a 16gb Sandsik Class 2 is working fine)
10. If you having restarts still, post what micro sd card you are using.
11. The problem lies with the Micro SD if you continue to have issues. ( Commong Windows Phone 7 issue)

cdguider said:
First I am assuming you are an T-Mobile USA HD2 user.
Disclaimer: THIS WILL RESET YOUR HD2 DEVICE TO STOCK. NO HSPL
If not correct me.
1. www.tmobile.com/wmupgrade (Download the official rom from T-Mobile USA)
2. Once you have downloaded the file, extract the exe using 7z or WinRar. ( Right click on the file and click on Extract to ....) Downlaod Link Attached.
3. Reaname the Ruu_signed.nbh to LEOIMG.nbh
4. Copy the LEOIMG.nbh to your micro sd card, put the file in the root directory. (If the phone sits at the bootloader screen, try a smaller size sd card ex. 2GB)
5. With the phone off , hold the Volume Down while turning the phone on. Once you see the Bootloader sceen you can stop holding the buttons. ( Usually it will recognize there is a Flashable Image on the card, If not try again only this time let go when you see a Loading Message .........)
6. The phone will then prompt you to press Press power or some other button to flash.
7. Once your phone restarts go through the prompts if you want to click finish.
8. Put your device back in Bootloader Mode and Download HSPL3 (Attached Below) Next Put your device back in Bootloader Mode and Flash Magldr 1.12 & Windows Phone 7 ( Sure you know these steps, If not readme file included in the file)
9. Make sure the SD card you plan to use is in the device before you flash Magldr and Windows Phone 7. (Most are claiming a 16gb Sandsik Class 2 is working fine)
10. If you having restarts still, post what micro sd card you are using.
11. The problem lies with the Micro SD if you continue to have issues. ( Commong Windows Phone 7 issue)
Click to expand...
Click to collapse
tried all this, but to no avail. (on a europe htc hd2 512. 2.14.50.04 576 enabled. didnt do exactly as you stated but i did do the hd2 eur. equivalent of the steps) tried 2 microsd cards, the standard 2gb sd card that was in my phone package and a new Integral 8gb class 4 micro sdhc card. as soon as wp7 is flashed the phone reboots, magldr goes into 123456 gogogo! mode and shows dft splash screen. next, screen goes black and phone reboots. phone only loads wp7 1 out of 50 tries (avarage, went through the whole process of flashing, formatting, reflashing, etc. 6 times now) and suffers from random reboots (in sleep mode).
if you want to know how i flash leo70:
either from custom wm6.5 rom or stock wm6.5 rom:
boot in hspl2.08
run task29
flash magldr1.12
usb flasher mode
dwi.exe
>reboot<
magldr > 123456 gogogo!
dft splash screen
screen goes black
htc logo > magldr1.12 > 123456 gogogo!
and again and again until i get lucky and wp7 boots. i go through all settings, phone chevrons easily, phone installs everything easily.
phone battery goes empty/phone random reboots. and goes back into bootloop. when phone finally boots back into wp7 i might either have lost all settings (like a HR) or the phone has actually rebooted correctly and i can continue until the next random reboot. yay me.
any options? is it the microsd card? is it the flashing process? is it anything else i am missing? if it's the microsd card, i am getting an 8gb class 10 sandisk by wednesday so i can then try again. thanks in advance, i really like wp7 so i would love to be able to use it on my hd2.

SD Card
Backup your information.
Format the sd card using windows.
Choose Default Allocation Unit Size
And Fat32
Quick Format
Let me know if this helps.

This happened to me... I am on T-Mo US... i tried everyhting... all roms... hspl... stock... android... bla bla bla... but nothing worked...
and they replaced the phone for me... its your CUP i think... mine was doing it everytime i would turn on GPS or a location based service... If its been less then a year since you bought the phone it should be a free replacement... well for me it was... and if you have insurance... i dont know how its in EU...

My phone keep restarting all the time ....before i flashed new roms and didnt work. Then i took my battery out my phone and put it back and realized that the little hinges on the right side of the sim card was bended and face out so i pushed it back and place the battery correct and phone works perfect make sure you didn't bend the little golden hinges where you set your batter at

phone in wm6.5 (custom rom dutty's ml v12 dutch) > usb mass storage mode
format drive H: (8gb integral microsdhc card) standard settings. fat32 quick format. successful
task 29
successful
magldr1.12
successful
boot into magldr1.12
option 5: USB flasher
LEO70 dfi.exe
successful
reboot into magldr
12456 gogogo!
dft splash screen
screen goes black and phone goes into bootloop. wp7 boots after 6 retries
just in case this time the bootloop is an anomaly i change some settings in wp7 and reboot
once again bootloop. stop after 10 retries without getting into wp7. reverting to wm6.5 and keep searching for fix.
note: during full process 8gb microSD card was plugged into phone.
note2: phone did see 7.23gb of free storage space in settings>about
sadly this too did not work. figure it has to be the micro sd card?
edit: @nemo0405 do not have insurance, phone has always worked properly on wm6.5 never had random reboots nor did it have bootloops. phone was bought december 5th of 2009.
@that nicca it's not a power issue. in wm6.5 i do not have any problem with random reboots or bootloops.
edit2: have yet to try 2.15 radio in stead of my current 2.14. trying now.
result: sadly no changes in bootloop.

^^^ try it bend the 1 golden hing and sit the battery on it where it dont touch and put your phone on you gonna see your phone restarting every min .....i had that problem try it see if it works

Try to charge your phone straight 24hrs.that fixes the issue for me.

leo70 said:
Please someone help/pm me etc - hd2 is flashable and spl'able mag'able but just reboots sooooo badly.
Click to expand...
Click to collapse
Go back and put the original stock rom back in, Then start again. You only need a 2gb micro SD. Dont know why everbody is using 16g? Its only used at booting in the Leo70 ROM. Use HSPL2 and change 2.08 to HSPL 2.08. Now put in the radio. I used 2.15.50.14. Now while still in bootloader mode, put in mgldr, and then when you see the menu, tab down to 5 and enter. once you have the gogogo and then Usb..Usb now flash in LEO70 rom. Now do you still have the loopy booty? If so, remove battery and re-insert. Looping stopped? If so go and set up the phone. If still loopy, remove battery again, now take out the sd card, put batt back in. Loopy stopped? If so set up phone. and if it sets up fully, then shut it down and put sd back in. If it goes loopy, then its the sd card. Make sure sd is formatted (FAT) before hand.
Let me know
Russ

leo70 said:
Please someone help/pm me etc - hd2 is flashable and spl'able mag'able but just reboots sooooo badly.
Click to expand...
Click to collapse
After a task 29, flash first MAGLDR 1.11 then 1.12 ...or flash directly a stock rom. I remind that i read somewhere that MAGLDR 1.12 is an update of 1.11.

Remember too, that some sd cards seem to be incompatible with WP7. I have used a 16gb Kingston class 4 micro sd and an Adata 32gb class 2 sd card. These both seem to work. Check the thread about sd card compatibility, you might find your answers there.
Cheers...

If you phone keeps restarting AFTER you have installed NAND WP7 then your micro sd card is incompatable with Windows Phone 7. Most kingston and sandisk cards seem to work but generic and other brands can have problems which match yours. Reformatting the card wont really help, you need to get a sandisk card (you can pick up a 16GB card for about £18 on ebay) and it should work fine.
Remember though that if you use a new micro sd card that you will need to reinstall WP7 via Magldr as once WP7 has been flashed it sets up the card you have in your phone in a special way and therefore you CANNOT hotswap cards after that.
Mark.

noellenchris said:
They will replace just flash stock rom and downgrade back to spl by using the hspl flasher, just select the spl. Call tech support and tell them it keeps rebooting and you reflashed stock rom 5 times. They will send you another hd2 and you'll be back in business.
Chris
Click to expand...
Click to collapse
dude surely it can't be that easy for get a free phone ?
if everyone phoned and said they had 5 unsuccessful attempts of fixing an hd2 and got a new one everyone would have multiple hd2's and htc would die !!!

YauMannn said:
dude surely it can't be that easy for get a free phone ?
if everyone phoned and said they had 5 unsuccessful attempts of fixing an hd2 and got a new one everyone would have multiple hd2's and htc would die !!!
Click to expand...
Click to collapse
HI all. I am the OP and doing wp7 'hspl'/flasher/kitchen with other devs too; sorta know what I am doing (to a degree anyway, otherwise I pretend I know ).
Anyway THAT is what I am doing: it is being fixed at factory now: WARRANTY. No - they dont give out free phones - but 5 flashes story makes sense! I did this before even reading that post (told them did stock RUU many times). and yes, they should REPLACE your phone under warranty. also: no, not tmous and no, Sd card fine. Thanks for all response but tried everything mentioned here guys except 24 hours charge constantly. That I shouldve given a GO at least before sending in maybe. ???. Battery gets very HOT. (magldr!). battery pins are fine; done everything possible; incl task 28, 28 55aa, 29.
I even tried flashing with dwi.exe with 0kb partxx.bin files to 'clean' it as suggested here and even did task2a and recovered it with stock rom+spl (there are ALWAYS ways if you keep trying and never give up) and even done own JTAG!
Couldnt figure it out in the end as it just freezes/loops on DFT screen or ANY droid screen. Sometimes even reboots on SPL screen! dangerous hey!!!!!!!!!! (omg). even when watching cpu direct. ROM doesnt matter. multiple sd cards tried. either is BadBlocks, CPU, or contacts somewhere shorting maybe.
Ideas still appreciated PLEASE but they should replace it with new or at least new motherboard(+processor+ram) under oem warranty- thanks all. .

cdguider said:
First I am assuming you are an T-Mobile USA HD2 user.
Disclaimer: THIS WILL RESET YOUR HD2 DEVICE TO STOCK. NO HSPL
If not correct me.
1. www.tmobile.com/wmupgrade (Download the official rom from T-Mobile USA)
2. Once you have downloaded the file, extract the exe using 7z or WinRar. ( Right click on the file and click on Extract to ....) Downlaod Link Attached.
3. Reaname the Ruu_signed.nbh to LEOIMG.nbh
4. Copy the LEOIMG.nbh to your micro sd card, put the file in the root directory. (If the phone sits at the bootloader screen, try a smaller size sd card ex. 2GB)
5. With the phone off , hold the Volume Down while turning the phone on. Once you see the Bootloader sceen you can stop holding the buttons. ( Usually it will recognize there is a Flashable Image on the card, If not try again only this time let go when you see a Loading Message .........)
6. The phone will then prompt you to press Press power or some other button to flash.
7. Once your phone restarts go through the prompts if you want to click finish.
8. Put your device back in Bootloader Mode and Download HSPL3 (Attached Below) Next Put your device back in Bootloader Mode and Flash Magldr 1.12 & Windows Phone 7 ( Sure you know these steps, If not readme file included in the file)
9. Make sure the SD card you plan to use is in the device before you flash Magldr and Windows Phone 7. (Most are claiming a 16gb Sandsik Class 2 is working fine)
10. If you having restarts still, post what micro sd card you are using.
11. The problem lies with the Micro SD if you continue to have issues. ( Commong Windows Phone 7 issue)
Click to expand...
Click to collapse
Thank you very much!!!
This works, but I didn't bother extracting the t-mos rom, I just installed it using the tmobile application that came with it.
I had 16gb sandisk (the one that came with the hd2) and I had no problems for 3 days. Before this I major problems pop up shortly after the first day.
Anyway, I just received my sandisk 32gb class 2, and I'm redoing all this hoping that it would work with this card as well.
Again Thank You!
Update: My 32gb class 2 Sandisk is running great!
Cheers!

Phone doesnt work and no USB

Hello guys,
got myself a BIG problem!!
I had installed a Nand version of android and it all worked fine but there was an update of the version so i thougt lets reinstal it all back to normal (WM 6.5) but the PC didnt recognized my phone the US doesnt work anymore
so i thougt it was a app i installed true Magldr 1.11 and tried to find it and delete it but unforuntly i had deleted all my setting and also the nand Android version!!!
when i tried to enter the 3 collerd screen it all runs op good and when i connent my USB it wil jam and keeps saying Serial and there will not get any text of USB
and when i do the Magldr screen and want to connect to SD card also the phone Jams and i need to disconnect the Battery and restart the phone and i can do the same things again......
Anyone got a suggestion to get my phone back up running!!
PS its about the HTC HD2 and i got the latest Radio and HSPL!!
Greating DragonRX

DragonRX said:
Hello guys,
got myself a BIG problem!!
I had installed a Nand version of android and it all worked fine but there was an update of the version so i thougt lets reinstal it all back to normal (WM 6.5) but the PC didnt recognized my phone the US doesnt work anymore
so i thougt it was a app i installed true Magldr 1.11 and tried to find it and delete it but unforuntly i had deleted all my setting and also the nand Android version!!!
when i tried to enter the 3 collerd screen it all runs op good and when i connent my USB it wil jam and keeps saying Serial and there will not get any text of USB
and when i do the Magldr screen and want to connect to SD card also the phone Jams and i need to disconnect the Battery and restart the phone and i can do the same things again......
Anyone got a suggestion to get my phone back up running!!
PS its about the HTC HD2 and i got the latest Radio and HSPL!!
Greating DragonRX
Click to expand...
Click to collapse
Boot into bootloader and then get the .nbh file from the wm rom you want to flash and copy that to the root of your sd card (formatted FAT32) and flash via sd card.

ClydeB1 said:
Boot into bootloader and then get the .nbh file from the wm rom you want to flash and copy that to the root of your sd card (formatted FAT32) and flash via sd card.
Click to expand...
Click to collapse
Thanks for the fast reply on my post,
butt what if i want to reinstal it back to te stock WM 6.5 do i need to put the RUU_Leo on my sd card??
and what did u mean with the bootloader the 3 collerd screen or the home screan of Magldr??

Just do the following:
Download a WM 6.5 ROM
Extract the .NBH file from the ROM to your SD card. (If you have to remove SD card and put into computer to be able to access it then do that)
Rename .NBH file on SD card "leoimg.nbh"
Turn phone off
Hold vol down button while pressing power button to enter bootloader
Phone should recognize the leoimg.nbh file on SD card and flash it to your phone

DragonRX said:
Thanks for the fast reply on my post,
butt what if i want to reinstal it back to te stock WM 6.5 do i need to put the RUU_Leo on my sd card??
and what did u mean with the bootloader the 3 collerd screen or the home screan of Magldr??
Click to expand...
Click to collapse
Get the stock ROM that you want to flash back to and you can unzip it with something like winrar or 7zip (it's a self extracting zip file really). The just rename the .nbh file to leoimg.nbh and put it in the root of your SD card. Start the phone in bootloader (tri-colour screen) and it should automatically flash the ROM for you.
Hope this helps - good luck mate.
Edit: Or what Digital Outcast posted while I was typing

thanks guys for the fast reply's will try it out as soon as i'm gettig @home
i'm @work so dont got a usb flasher over here (A)
again thanks and I hope this works!!!

Good luck

Thanks guys my phone is working again(Y)
but still no USB
so ony of u guys got a idee what happend to the USB connection??
Or anybody else

Your usb port is prolly busted meaning you have to get your motherboard fixed sadly.

try a different cable and usb port to start with rather than assume the usb is broke onthe phone

[Q] Unable to reflash to stock ROM

Hi guys,
So recently my screen stopped working and I need to get it fixed. I want to revert the phone back to its stock ROM but I can't seem to do that. I downloaded the stock rom and followed this guide: http://www.youtube.com/watch?v=Wc89Gh0QpIY&feature=player_embedded
But, when I get into bootloader, in the white section of the screen it says Serial and it just stays unresponsive, it doesn't boot up like in the video. Any ideas on what's going on?

Did you rename the .nbh file to LEOIM.nbh? Also did you put thenfilenon the root(not in a folder) of your SD card? If you have done both of these then make a back up of you SD card and then reformat you SD card with a full format and not a quick format. Also the SD card method does not work well with larger SD cards so you may have to try a 2gig or 4gig SD card. Last you can use HSPL 4 to revert back to stock SPL just choose the SPL version from the drop down box when you run the installer, here is a hint the SPL's with four zeros at the end are stock SPL's.

Thanks for the reply
So, I tried reformating my 16 gb SD and still have the same problem. I then tried to do it with a 4 GB SD, same thing. So I tried it with HSPL but I can't sync the phone to my PC since it's in storage mode and with the touchscreen broken I can't adjust it to sync. I'm not taking the phone to a verified dealer so they probably won't care that it's flashed. The problem, from what I understand is that the digitizer is broken, so it shouldn't matter that the phone is flashed, right?
Thanks

You can connect it to the PC for flashing without Windows Mobile through the bootloader (3-colour screen). Just turn that on and connect it; Serial should change into USB and you are ready to flash.
About SD card method: Make sure the nbh file is named LEOIMG.nbh. The letters MUST be uppercase, else it might not work.

Spaqin said:
You can connect it to the PC for flashing without Windows Mobile through the bootloader (3-colour screen). Just turn that on and connect it; Serial should change into USB and you are ready to flash.
About SD card method: Make sure the nbh file is named LEOIMG.nbh. The letters MUST be uppercase, else it might not work.
Click to expand...
Click to collapse
Thanks a lot, that worked.