Hi!
I got a major problem when i upgrading my Qtek1010 to PPC 2003..
It works really good until the machine goes on suspend or i try to reboot.
I can't get it to restart, it's like the "on button" is broken. If i press soft reset the machine boots up really fine OR if i open and close the sim card holder...
Does anybody have a clue over what's wrong? I have been trying to find the answer on the forum but with no luck...
/Mike
Have you KSE Truefax on your device?
Than this is the problem....
HTH
Stefan
hmm, another error..
Thanks for the help, the phone is working now, except for one thing.. GPRS!!
Vodafone has made som upgrade on GPRS so QTEK want's me to send the phone to service... There should be a way to solve this without sending the phone... Do you have any idea? Maybe it's the radio that needs upgrading?
do you have the right settings for vodaphone where you live ?
often you have to manualy setup such settings in connections after a rom upgrade
you can try search for which settings vodaphone use
I've tested different settings, but i don't think that's the problem. i think that i have to use the right radiostack or something like that to get it to work..
Have a problem, I´m not able to install MS voice command on my 9100.
No problem with S100 runnin W2003.
But Is it it compatible with w2005?
Every time I try to do this is says: cannot install.
Why?
Please help, really want it on my 9100!
which version of voice command are you trying to install?
1.0, and then upgrade to 1.5..
That´s the only files I have. But I cannot get 1.0 to work, so its pretty hard to upgrade to 1.5...
But it worked to do this on S100
I had the same issue. I dont have it in front of me, but here's the process.
Install version 1.0. In the activesync application manager, uncheck version 1.0 so that it uninstalls from the PDA but not from the desktop. Install version 1.50.
After it goes through its install process, make sure that its checked in the activesync app manager.
Hope this helps, I had to do it a couple of times, (check version 1.0 to install, then uncheck again).
cnegron said:
I had the same issue. I dont have it in front of me, but here's the process.
Install version 1.0. In the activesync application manager, uncheck version 1.0 so that it uninstalls from the PDA but not from the desktop. Install version 1.50.
After it goes through its install process, make sure that its checked in the activesync app manager.
Hope this helps, I had to do it a couple of times, (check version 1.0 to install, then uncheck again).
Click to expand...
Click to collapse
Thx so much.. had to install, uninstall about 30 times, but now it works!!
Txh!
Hi!
I've tried voice command 1.5 on a qtek 9100 and it is really slowing everything down so much I had to turn it off. Starting programs, switching between them and using any program is a real pain with Voice Command enabled :-(
Does any of you have the same problem?
Regards,
// aste - writing this on the phone
Sorry no problem for me on a Qtek 9100...
I had Voice command 1.5 on my Magician (MDA Compact) which worked fine, I put it on my Wizard (Vario) and it was slowing it down so I transferred it to Storage card and it appears to be better. Only problem is on soft rest it says voice command cannot be found and you have trouble removing the warning box it sticks around for ages. When installing it also says...won't work properl on storage card, put on phone or something, but it works just fine.
monkeyphonix said:
I had Voice command 1.5 on my Magician (MDA Compact) which worked fine, I put it on my Wizard (Vario) and it was slowing it down so I transferred it to Storage card and it appears to be better.
Click to expand...
Click to collapse
I've got it installed on my Vario (on the phone) and it's not slowing it down at all.
Odd...
Cheers,
AJ
Hi,
Suddenly i can't install programs tru active sync anymore.
It worked until yesterday i wanna install a program but i didn't apear on my vario.
Try it for some times but it would not work.
Today i want to install another program this would also not install on my vario.
What is the problem?? does anyone know.
Grtz
Did Activesync stop synching before that ? Or did it crash during some install ? I had this too, my programs list on my wizard went empty, couldnt install/deinstall/synchronise anymore. Reinstall of ActiveSync did not work so I was forced to hard-reset my device in able to work with it again .... thanks ms activesync ...
I was installing MS Voice Command to my s200 and at the s200 there was an error and installation was not successful. After this I can not see the softwares installed in my s200 at Settings/Remove Programs. Also activesync started to give an error and I can connect as Guest :?
What is the problem and the what can I do to repair? I wish there was something like system restore in WM5. I hope I wont have to hard reset.
Need help here :roll:
Hard reset does not always have to be so bad!
Look at it from the bright side:
You have a clean device again and installing your software via active sync (if you have installed it via this way before) isn't all that difficult either.
Cheer-up and make sure to buy sprite back up for when it happens again to you.
Robin
Ok that is fine. But anyone knows what may cause this and if I can solve without hard reset. :roll:
Seems no!?
hi I have a question. I installed wm 6.1 on my Hermes 100 or Cingular 8525 from this site. I was wondering how can I uninstall it because I do not have windows vista. The message that my phone reads that the beta test is has concluded. I have tried hard and soft reset neither has reset it back to wm 6 or 5. I cannot use any of the phone functions and I really need my phone. Do have or solution or know anyone who can help me.
dewdude said:
hi I have a question. I installed wm 6.1 on my Hermes 100 or Cingular 8525 from this site. I was wondering how can I uninstall it because I do not have windows vista. The message that my phone reads that the beta test is has concluded. I have tried hard and soft reset neither has reset it back to wm 6 or 5. I cannot use any of the phone functions and I really need my phone. Do have or solution or know anyone who can help me.
Click to expand...
Click to collapse
You need to post at the appropriate thread, which rom did you download?