I was installing MS Voice Command to my s200 and at the s200 there was an error and installation was not successful. After this I can not see the softwares installed in my s200 at Settings/Remove Programs. Also activesync started to give an error and I can connect as Guest :?
What is the problem and the what can I do to repair? I wish there was something like system restore in WM5. I hope I wont have to hard reset.
Need help here :roll:
Hard reset does not always have to be so bad!
Look at it from the bright side:
You have a clean device again and installing your software via active sync (if you have installed it via this way before) isn't all that difficult either.
Cheer-up and make sure to buy sprite back up for when it happens again to you.
Robin
Ok that is fine. But anyone knows what may cause this and if I can solve without hard reset. :roll:
Seems no!?
Related
I can't make a standard partnership with my PC, everytime I get this messege and I makes e crazy :evil:
I tried to reinstall actuvsync, make a new partnership, delet the old partnership but nothing happend.
Please help, I can just make a quest partnership
is it the latest 3.7.1 ?
Yes it's v. 3.7.1
Shaytaan,
Are you able to try it on another PC?
If you can do so, at least you can narrow down the issue by eliminating the PC side, to then concentrate on the XDA.
I'd be thinking it's a database corruption on the XDA though, and I imagine a cold boot would be required to get everything working again. That said, I'm not talking from experience here - just thinking out loud I guess....
Codenix. :roll:
Thanks for replying
Soft reset didn't solve the problem, I tried many times.
I guess the problem happend after I installed Experince 2.0.3 and my dashboad disapeared from my ppc destop, so I decided to uninstall Exerience, after that I can't connect to my activsync again and there is nothing mentioned at activsync troubleshooting :x
Can anyone help please :roll:
Okay, then it sounds like it's more of a PC-side thing (if reset didn't fix it).
Once again, can you try it on another PC? If you find that you can set up a partnership on another PC, then it's going to be something on your PC which is causing the problem.
If you're using Win XP (and you know when the problem started, and you're using the built-in XP restore points which are on by default), you might be able to restore your PC to a point before your problems occured.
Codenix.
I could also imagine that the problem is on the PC side of things. What OUTLOOK version are you running? May it be that you have some corrupted data in there?
As bad as it sounds... you may need to go through a re-installation there...
thanks...
I have officeXP 2003 and winXP pro sp2
Now I hard reset my PPC and reinstall activsync.
dear all
i can not run activesincron in the pc with my xda2 true the usb cradel
but the bluetouth work fine also the cradel work
he charge the device
please have you any suggestion ???
the device is too slow the are any suggestion ???
i have qtek 2020 with
Rom 1.66.02 FR
Date of rom 02/23/04
radio ver 1.10.00
protocol 1337.18
ExtRom 1.66.211
make sure you have ActiveSync 3.7.1 or re-install it ... delete and re-creat the partnership if needed
Biso007 said:
make sure you have ActiveSync 3.7.1 or re-install it ... delete and re-creat the partnership if needed
Click to expand...
Click to collapse
hi biso007
thank's for your replay
yes i do it but noting
the strange that i can by connected true bluetooth
i dont like to make a hard reset .... :evil:
have you tried opening activesync on your pocketpc
clicking tools
clicking option
clicking options
clicking enable pc sync when using this connection
and choosing 'USB ?
Rudegar said:
have you tried opening activesync on your pocketpc
clicking tools
clicking option
clicking options
clicking enable pc sync when using this connection
and choosing 'USB ?
Click to expand...
Click to collapse
hi rudegar
thank's for your replay
yes
this config is standart and i dont change it
the device work before its only today i dont know whats hapend
also i remove all soft that i install today
checknotifications
clearnotify
phoneled_on-off
Pocket_Hack_Master
i remove all this and i make a soft reset many time
but nothing
also the are no conflict into the usb device and the cradel is know well by the pc
i suggest if there are no pin connection broken (but i see well no pin broken ) it's a software configuration
but how .....
sacaman
and activesync is set to use usb also ?
I had exactly the same problem about a month ago and after trying everything under the sun and nothing working i eventually ended up doing a hard reset,
It fixed it instantly so i restored all my data from a backup and it stopped working straight after the restore,
i hard reset once again and it synced ok, so i then had to reinstall all my programs individually rather than restoring the backup, it was very annoying but i dont think theres any other way around it
hi all
thank's for your response
it 's ok now but after making hard reset :evil:
i mst install software one by one to know who create this problem
and i keep you informed
by after all backup :evil: :evil:
Hi guys
Could anyone help me in this problem??
When I connect the Jasjar to the PC through the cable it appeares this error message:
Critical communications srvices have failed to start . Try resetting the mobile device .and then connect again.
What I did as a solution:
1. Soft reset (nothing happened) same problem
2. Hard reset (it was very bad without backup) still nothing happened
3. Remove Microsoft Active Sync 4.0
4.Install Microsoft active sync 4.1 and the surprise was that same problem still last. In the other hand I can connet the I-mate PDA2K normally .
how can I FIX it please?
This is my first time
So no one want to help me OR there is no solution
Anyway thanks for whome that read it and think about it!
Hello, my friends!!
I've a problem and i'm hopping you can help me resolve it!!
Today i installed in my pc the new activesync 4.5, but i0m unable to make a connection between my S200 and the pc!! It just isn't recognized by the pc and it does'n syncronize!!!
Can anybody please help me??
Thanks in adcvance!!!
Ensure your network to the phone is not firewalled. In ZoneAlarm you have to change the phone network to "Trusted" zone.
V
Install this and try RDNIS or Serial
Hello and thanks a lot for the solutions you posted, but i have another problem!!!
When i try to install this software you gave me, my ppc simply refuses it because it says tha there is no digital signature on the program!!
Can anyone help me install this software??
Is there any way to overrunn this error message??
Thank you!!
@vijjay
I even tryed to connect it with the firewall disabeled, but i still can´t connect the ppc to activesync!!
Any other ideas??
Its weird, but usually any PPC can accept that software, tried it before with my Himalaya, Wizard and now my Prophet and all i did was install it and begin to use..
However, that error message usually happens when you have an Application Unlocked device, you can try to de-cert it first...it is really weird as i know, it only does happen with Smartphones..
Hello
This may appear crazy, but it worked for me unintentionally of course. I had given up on being able to sync via Activesync and was looking for a solution to backup my contacts before hard resetting my phone.
I had a permanent 'Synchronization Error', I just tried a piece of software posted here
http://forum.xda-developers.com/viewtopic.php?t=63479
This software is designed to backup contacts, but when I ran it FIXED my 'Synchronization Error', I don't know how or why, but my phone is now working with Activesync, maybe it will fix your problem too.
It won’t do any harm to try it, as all it does is create a backup of contacts.
when ever i try to connect my MDA to PC is get this error "Synchronization cannot be completed. Disconnect your device and try again. If the problem persists, see the Microsoft Troubleshooter in Microsoft ". i tried everything i reinstalled active sync deleted the patnership. i cannot even install anything to mda using pc so i cannot even install sprite back up incase i do a hard reset can anybody help me with this problem.
Edit/Delete Message
1) Worst case, find a backup program that you can download as a CAB right to your phone... do that first. Try www.freecabs.de
2) I assume you've done a soft reset? Try unloading all of your Today plugins, soft reset, and try again.
3) Try turning off USB Advanced Functionality on your MDA.
4) Try unplugging and re-seating the USB cable.
5) Try rebooting your computer. Try Active Sync with *nothing* else running, including exiting everything unnecessary in the system tray.
6) Try different versions of ActiveSync... for example, I have problems with the newest version, so I'm using the last beta quite happily.
There's other stuff beyond all that. Post back if it's still not working... I seriously doubt a hard reset will be necessary.
Make sure you make provisdons for any firewall and antivirus programs to allow activesync to work. You can just disable it/them one at a time to see if they are the problem first.