Hello, my friends!!
I've a problem and i'm hopping you can help me resolve it!!
Today i installed in my pc the new activesync 4.5, but i0m unable to make a connection between my S200 and the pc!! It just isn't recognized by the pc and it does'n syncronize!!!
Can anybody please help me??
Thanks in adcvance!!!
Ensure your network to the phone is not firewalled. In ZoneAlarm you have to change the phone network to "Trusted" zone.
V
Install this and try RDNIS or Serial
Hello and thanks a lot for the solutions you posted, but i have another problem!!!
When i try to install this software you gave me, my ppc simply refuses it because it says tha there is no digital signature on the program!!
Can anyone help me install this software??
Is there any way to overrunn this error message??
Thank you!!
@vijjay
I even tryed to connect it with the firewall disabeled, but i still can´t connect the ppc to activesync!!
Any other ideas??
Its weird, but usually any PPC can accept that software, tried it before with my Himalaya, Wizard and now my Prophet and all i did was install it and begin to use..
However, that error message usually happens when you have an Application Unlocked device, you can try to de-cert it first...it is really weird as i know, it only does happen with Smartphones..
Hello
This may appear crazy, but it worked for me unintentionally of course. I had given up on being able to sync via Activesync and was looking for a solution to backup my contacts before hard resetting my phone.
I had a permanent 'Synchronization Error', I just tried a piece of software posted here
http://forum.xda-developers.com/viewtopic.php?t=63479
This software is designed to backup contacts, but when I ran it FIXED my 'Synchronization Error', I don't know how or why, but my phone is now working with Activesync, maybe it will fix your problem too.
It won’t do any harm to try it, as all it does is create a backup of contacts.
Related
I can't make a standard partnership with my PC, everytime I get this messege and I makes e crazy :evil:
I tried to reinstall actuvsync, make a new partnership, delet the old partnership but nothing happend.
Please help, I can just make a quest partnership
is it the latest 3.7.1 ?
Yes it's v. 3.7.1
Shaytaan,
Are you able to try it on another PC?
If you can do so, at least you can narrow down the issue by eliminating the PC side, to then concentrate on the XDA.
I'd be thinking it's a database corruption on the XDA though, and I imagine a cold boot would be required to get everything working again. That said, I'm not talking from experience here - just thinking out loud I guess....
Codenix. :roll:
Thanks for replying
Soft reset didn't solve the problem, I tried many times.
I guess the problem happend after I installed Experince 2.0.3 and my dashboad disapeared from my ppc destop, so I decided to uninstall Exerience, after that I can't connect to my activsync again and there is nothing mentioned at activsync troubleshooting :x
Can anyone help please :roll:
Okay, then it sounds like it's more of a PC-side thing (if reset didn't fix it).
Once again, can you try it on another PC? If you find that you can set up a partnership on another PC, then it's going to be something on your PC which is causing the problem.
If you're using Win XP (and you know when the problem started, and you're using the built-in XP restore points which are on by default), you might be able to restore your PC to a point before your problems occured.
Codenix.
I could also imagine that the problem is on the PC side of things. What OUTLOOK version are you running? May it be that you have some corrupted data in there?
As bad as it sounds... you may need to go through a re-installation there...
thanks...
I have officeXP 2003 and winXP pro sp2
Now I hard reset my PPC and reinstall activsync.
Help! today i was playing with my uni today and for some reason now active sync wont syncronize everytime i connect on the device it says connected and it gives me this error
"Synchronization cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop computer."
and it is connected with the Guest account afterwards, it was working about 30min ago...
i think hat caused it is i accidently deleted a folder in application data called MDM or MDA or sth i cant remember would that have caused the problem? anyone go a backup of that file? maybe i can get a copy of? or anyone know the cause of the prob? i've turned off my firewall and everything just incase i thought it would intervene with active sync but still no luck
also i can install ay app it keep saying Installation of "the app.cab" was unsuccessful.
thanks in advance
I was installing MS Voice Command to my s200 and at the s200 there was an error and installation was not successful. After this I can not see the softwares installed in my s200 at Settings/Remove Programs. Also activesync started to give an error and I can connect as Guest :?
What is the problem and the what can I do to repair? I wish there was something like system restore in WM5. I hope I wont have to hard reset.
Need help here :roll:
Hard reset does not always have to be so bad!
Look at it from the bright side:
You have a clean device again and installing your software via active sync (if you have installed it via this way before) isn't all that difficult either.
Cheer-up and make sure to buy sprite back up for when it happens again to you.
Robin
Ok that is fine. But anyone knows what may cause this and if I can solve without hard reset. :roll:
Seems no!?
I got the new SPV 5000 as upgrade on orange and the first thing i did was unlock it using the bootloader by BUZZ from this site. Once i unlocked the phone, it works fine, everything is great. But when i try to connect it to the PC, it gives me an error, saying download Active sync 4.1 for it, I downloaded the latest 4.2 and tried to connect my universal to it, but it isnt able to connect, i dont know why..
sometimes it just gives me an error and says, check/report error and does all the status reports and stuff, but still not luck. I connected once and then when i clicked the explore button everything was blank, cant see my device or folders and nothing at all.
Please help me if someone knows the solution to it.. Cheers
Do you have another PC with which to try it out? Maybe the activesync installation or the USB drivers got corrupt.
Also, try syncing thru Bluetooth if your PC has BT. This might isolate the problem.
hello Jorgee, thanks for the reply, Yes it did work on the other PC, so does it mean that my current Pc's USB drivers are corrupt, coz the other day my USB TV stopped working on this one too. hehehe.. any solution to this PC problem
cheers mate
I find that if I'm connected to work using the Cisco VPN Client then ActiveSync won't connect, not really a big deal I guess but annoying all the same!
I have been trying to sincronize my S200 Qtek but it is impossible. I have made several hard and soft resets and tried with three different computers. I have installed 4.1, 4.2 and 4.5 beta versions of ActiveSync, but it is always the same: ActiveSync seems to turn on but no sincronization initialize when I connect my S200 to the USB port.
I have also made a format and reinstall windows XP but I can't syncronize information... please help me!
I have also tried to install "USB killer" without success...
Did you disable Win XP firewall? You have to disable it or any other firewall that may be installed.
If that solves your problem search MS site for how to authorise ActiveSync for your firewall.
Yes, in fact when I reinstalled windows I didn't install Norton because of the firewall. I have also unactivated windows firewall... but no sincronization occurrs
Maybe you could try another USB Cable? Or try to sync using Bluetooth?
Can't sync my S200 either...
Don't think it's cable because it is brand new :'(
Have you tried to upgrade to the latest activesync right after the installation of windows? (found here)
And perhaps some overactive antivirus programs can bug up syncing too sometimes. Did the installation of new hardware go well after you plug in your device?
When you plug in, did nothing happen or was there a small screen saying it was getting information from the phone? If yes, were you able to setup a connection (guest etc) and after that it didn't want to sync?
Got this issue resolved the fault was some tweaking I did... See, I use fixed IP with my router so I disabled the DHCP client service on services.msc... So activesync could't get the right adress from the prophet... Still don't know how I manage to make that assumption about this problem, but gladly I did
Hope this help other people with similar problem...
Same issue
tonimacaya said:
I have been trying to sincronize my S200 Qtek but it is impossible. I have made several hard and soft resets and tried with three different computers. I have installed 4.1, 4.2 and 4.5 beta versions of ActiveSync, but it is always the same: ActiveSync seems to turn on but no sincronization initialize when I connect my S200 to the USB port.
I have also made a format and reinstall windows XP but I can't syncronize information... please help me!
I have also tried to install "USB killer" without success...
Click to expand...
Click to collapse
Did you manage to fix your USB problem?
I need some support with the same problem.
Regards,
h