Have a problem, I´m not able to install MS voice command on my 9100.
No problem with S100 runnin W2003.
But Is it it compatible with w2005?
Every time I try to do this is says: cannot install.
Why?
Please help, really want it on my 9100!
which version of voice command are you trying to install?
1.0, and then upgrade to 1.5..
That´s the only files I have. But I cannot get 1.0 to work, so its pretty hard to upgrade to 1.5...
But it worked to do this on S100
I had the same issue. I dont have it in front of me, but here's the process.
Install version 1.0. In the activesync application manager, uncheck version 1.0 so that it uninstalls from the PDA but not from the desktop. Install version 1.50.
After it goes through its install process, make sure that its checked in the activesync app manager.
Hope this helps, I had to do it a couple of times, (check version 1.0 to install, then uncheck again).
cnegron said:
I had the same issue. I dont have it in front of me, but here's the process.
Install version 1.0. In the activesync application manager, uncheck version 1.0 so that it uninstalls from the PDA but not from the desktop. Install version 1.50.
After it goes through its install process, make sure that its checked in the activesync app manager.
Hope this helps, I had to do it a couple of times, (check version 1.0 to install, then uncheck again).
Click to expand...
Click to collapse
Thx so much.. had to install, uninstall about 30 times, but now it works!!
Txh!
Hi!
I've tried voice command 1.5 on a qtek 9100 and it is really slowing everything down so much I had to turn it off. Starting programs, switching between them and using any program is a real pain with Voice Command enabled :-(
Does any of you have the same problem?
Regards,
// aste - writing this on the phone
Sorry no problem for me on a Qtek 9100...
I had Voice command 1.5 on my Magician (MDA Compact) which worked fine, I put it on my Wizard (Vario) and it was slowing it down so I transferred it to Storage card and it appears to be better. Only problem is on soft rest it says voice command cannot be found and you have trouble removing the warning box it sticks around for ages. When installing it also says...won't work properl on storage card, put on phone or something, but it works just fine.
monkeyphonix said:
I had Voice command 1.5 on my Magician (MDA Compact) which worked fine, I put it on my Wizard (Vario) and it was slowing it down so I transferred it to Storage card and it appears to be better.
Click to expand...
Click to collapse
I've got it installed on my Vario (on the phone) and it's not slowing it down at all.
Odd...
Cheers,
AJ
Related
OK i have install Pocket Bluetooth Tools Version 1.1.0.0 on my SPV M500, but when i pair a device, the menu just flashes up and then disapears and nothing. If i go in to activeSync i also do not have the option like the website shows
Help is needed or do i need to use another version
Thanks
Brian
You will need to unstall the latest version and install the following version:
BTHTools1012.exe
This one works for me!
Panja said:
You will need to unstall the latest version and install the following version:
BTHTools1012.exe
This one works for me!
Click to expand...
Click to collapse
The latest version gives a lot of stability problems on my MDA Compact. After 2 of 3 on/off-switches of bluetooth I have to reset my MDA. After installing the previous version I have no problem anymore.
By the way: there is a way to use the latest version of Pocket Bluetooth: when you pair your device and get the "flashing" screen from Pocket Bluetooth, go to the Today screen before you finish the pairing!
There you will find the Pocket Bluetooth screen. Select the COM-port and finish. Then go back to the bluetooth manager en finish the pairing.
I hope you understand my explanation. It worked for me.
But as said before: the latest version is not stabile, choose the previous.
thanks for your help, will try that
:lol:
Brian
why should one use Pockte BT tools with Magician?
Thought the BT Stack is good enough these days (well: final Himalaya versions were good enough also)
edsub said:
why should one use Pockte BT tools with Magician?
Thought the BT Stack is good enough these days (well: final Himalaya versions were good enough also)
Click to expand...
Click to collapse
I'm using it because I had problems getting active sync to work.
With BT Tools it works after 10 sec
You can use any task manager like MortButtons to switch to the BTTools before finishing the pairing.
thanks
pietrucci said:
The latest version gives a lot of stability problems on my MDA Compact. After 2 of 3 on/off-switches of bluetooth I have to reset my MDA. After installing the previous version I have no problem anymore.
By the way: there is a way to use the latest version of Pocket Bluetooth: when you pair your device and get the "flashing" screen from Pocket Bluetooth, go to the Today screen before you finish the pairing!
There you will find the Pocket Bluetooth screen. Select the COM-port and finish. Then go back to the bluetooth manager en finish the pairing.
I hope you understand my explanation. It worked for me.
But as said before: the latest version is not stabile, choose the previous.
Click to expand...
Click to collapse
thank you - this has worked for me after hours of research!!
read more: http://www.softick.com/news.html#83
Re: Softick Card Export II version 2.11! Now working on Wiza
dddrko said:
read more: http://www.softick.com/news.html#83
Click to expand...
Click to collapse
It still makes my wizard to lock up...
Re: Softick Card Export II version 2.11! Now working on Wiza
bolasz said:
dddrko said:
read more: http://www.softick.com/news.html#83
Click to expand...
Click to collapse
It still makes my wizard to lock up...
Click to expand...
Click to collapse
It works for my 838.. I have lockup and unable to switch to SDcard mode only if I connected to my PC and activesync once and unplug. But that seems to be the activesync issue in my 838 which fail to free itself from unplug from PC. So it cannot switch to SDcard mode..and prompt me an error message.
I have already switch to AS4.1 but does not improve my situation.
What is Microsoft doing here?? :roll: A soft reset is the only way to get my device syncup again.. :x
I own this program since I had my XDA mini ...
finally I can use it again to copy some files to my pda and use it as a memory stick...
I also noticed some problems:
1. after I connect the USD cable and the PC recognized my pda as a memory stick, Windows XP asked me to make a reboot in order to be able to use the new 'harddrive'
2. after I copied a .jpg to my pda it looked like the storage card is no longer recognized by WM5. The icons of the shortcuts to programs I installed are missing and I cannot browse with TotalCommander to my storage card.
After disconnecting the USD cable, my storage card could be found again - is this a bug or a feature?!
After the first connect in mode 'Card Export' I switched to 'Active Sync' and the synching went on without any problems.
After agains swithing to mode 'Card Export' my Wizard gave an error message, as follows:
"Cannot switch between Card Export and Active Sanc modes. This may be because of missing dlls or corrupted registry entries."
This looks also to me like an incompatibility between card export and active sync.
Hmpf ... rebootet the phone and connected - voila - my Wizard was again properly verified as Memory Stick and I again could upload another .jpg to my device.
It looks definately unfinished ... but it is working quite acceptable to me, though there is a lot room for improvement, it will get the job done, if I need a memory stick 'on the go'.
My device is a HTC Wizard, O2 german.
i may be wrong on the second point, but activesync alters a file when you transfer it to the pda,
so if you transfer a file to the card (even using a card reader) then put the card back in the pda wm5 will not recognise it properly.
point 1 should only happen the first time of detection.
have no problem with my XDA II...
Chris09 said:
After agains swithing to mode 'Card Export' my Wizard gave an error message, as follows:
"Cannot switch between Card Export and Active Sanc modes. This may be because of missing dlls or corrupted registry entries."
Click to expand...
Click to collapse
I am experiencing the same... Please update this topic if you'll find a solution.
i'm having the missing dlls dialog problem too.
I noticed that once you activesync'ed, you can't switch to card mode and need to reboot the device.
However, mine can't seem to work anymore. It won't even switch. But I also tried disabling my today's screen (pocket plus and pocket breeze) and it works... but only the icon manage to change. My PC can't detect it as a mass storage device though.
Any luck?
Mine is working fine, I got that dll message once but a soft reset fixed it.
Just wondering what roms are you guys using that works with softick? I'm using rom version 1.6.7.1 WWE which doesn't seem to work. I tried hard reset and install softick on the first reboot. The computer detected a new hardware but failed to install the device.
vmirage said:
Just wondering what roms are you guys using that works with softick? I'm using rom version 1.6.7.1 WWE which doesn't seem to work. I tried hard reset and install softick on the first reboot. The computer detected a new hardware but failed to install the device.
Click to expand...
Click to collapse
I get exact problem, detects a HTC device, trys to load the USB Mass Storage Device, hang for a short period and then in Device Manager show up with a problem. Fails to install or display drive letter for SD Card in phone. Have tried everything, happens on XP and Windows 2000 PCs, tried various PC's, same problem.
Can anyone help
p.s - I have the T-Mobile MDA Vario phone, same as imate-kjam I believe.
eilz said:
vmirage said:
Just wondering what roms are you guys using that works with softick? I'm using rom version 1.6.7.1 WWE which doesn't seem to work. I tried hard reset and install softick on the first reboot. The computer detected a new hardware but failed to install the device.
Click to expand...
Click to collapse
I get exact problem, detects a HTC device, trys to load the USB Mass Storage Device, hang for a short period and then in Device Manager show up with a problem. Fails to install or display drive letter for SD Card in phone. Have tried everything, happens on XP and Windows 2000 PCs, tried various PC's, same problem.
Can anyone help
p.s - I have the T-Mobile MDA Vario phone, same as imate-kjam I believe.
Click to expand...
Click to collapse
Same here too!! using ver 2.12
ver 2.11 worked fine with me, so most probably I will downgrade to it now.
I emailed the tech support and waiting for their reply. I will post it here in case I get anything new.
I just tried v2.12, and it didn't work. I found v2.11 on some download site, and installed it. v2.11 worked fine on Qtek's 2.8.7.1 ROM.
I cant get this to work either using 2.12. I get the device manager problem as mentioned previously. Does anyone know where can i get 2.11 from?
found it here:
http://www.softick.com/files/CardExportPPC211c-softick-en.zip
but i get the same problem
You can find previous versions in the "download" section on the left.
I'm having the same issues, used to work fine with 2.11, then it stopped being able to write but could still read (this is on my Mac), and now with 2.12 I can't even get the thing to mount. I'm talking with the developer to see if we can get a fix.
Any 2.12 and 2.11 not working for me... My computer and three others shows me message that they don't have drivers
I posted a query on their forum.
Heres their reply:
http://softick-forum.com/viewtopic.php?p=35#35
pewe said:
I posted a query on their forum.
Heres their reply:
http://softick-forum.com/viewtopic.php?p=35#35
Click to expand...
Click to collapse
I'm a bit confused regarding their reply.
You asked a question about the Wizard and they replied saying they are waiting on delivery of HTC Universal to examine it better. I'm not sure what the Universal has to do with compatibilty for the Wizard as they are completely different devices with different hardware. (Mybe i'm wrong and the hardware components that Card Export uses is actually the same on both devices)
Puckster -
I noticed this on second look, and asked for clarification.
just want to inform everyone that there is a free alternative. it's similar to softick card export that it turns your device into a plug-and-play card reader. it's called wm5torage (yes, the number '5' is the letter 'S')
http://forum.xda-developers.com/viewtopic.php?t=45411&highlight=wm5torage
it does not have the system tray icon that enables you to switch between activesync and export mode, but rather you open the app in your accessories folder and activate/deactivate it from there.
but hey, it's free and it works
I have MS voice command 1.0 and I want to install it on my new T-mobile MDA (USA) - its running windows mobile 5.0
When it downloads the cab to the MDA, it pops up an error:
"this program is being installed to "". We recommend this to be installed to MAIN MEMORY instead. YES , NO options "
If I click yes, it installs but the program does not work.
If I click no, it does not install.
What is going on ???
i had this problem, i had to do a hard reset to install it
voice command 1.0 is an old version that doesn't work well.
there is an update, voice command 1.50, which is much better and is free to those who have 1.0 installed on their PC. Check the Microsoft website for it!
Install 1.0 on the computer (don't install on the PPC!) and then install 1.50...
that should solve your problem!
Thanks!
First of all, I had some minor problems getting Activesync to recognize my 8525. (XP, Net 2.0). After a couple of driver updates or whatever, it finally worked!
I tried flashing to a different ROM but had problems during the HardSPL procedure. I stopped it, but THEN had some problems trying to connect my 8525 to the PC!! (Activesync again, ugh!) I uninstalled & re-installed Activesync like 3 times, and FINALLY got it to work again!
Now I have problems installing .CAB files to my 8525. I keep on getting the warning:
"The program is from an unknown publisher. You should install it only...."
I press "YES" and it comes as "unsuccessful".
I press "NO" and I get the "... program cannot be installed because it is not digitally signed with a trusted certificate".
Besides having installation problems, I also noticed that Activesync keeps on disappearing/uninstalling from my PC. I have to install Activesync 4.5 every time I turn on the PC.
Can some one tell me what's going on? What should I do? Should I do a "HARD RESET"? (I have done a SOFT RESET but to no avail). I would appreciate some help. Thanks!
I found out that I shouldn't do a HARD RESET because it will erase the "unlocked" feature in my phone. (I bought the phone unlocked).
I have researched the wiki, and some threads, and ACTUALLY someone else had this problem, way back in 2006. (The .CAB problem). But no one responded.
I also had to uninstall a program I had previously installed in my 8525 due to the fact that it stopped responding. It just wouldn't work anymore. I got the same "unsigned certificate" message.
I guess I'm going to RE-INSTALL Activesync ALLL over again. Maybe it will help it or something...
(This is literally going to be like the 5th time I install Activesync. And I just got the 8525).
IF ANYBODY CAN HELP ME WITH THE .CAB PROBLEM I WOULD APPRECIATE IT.
(I'm running WM6 Pro, AT&T)
freakin piece of crap!
its STILL NOT WORKING!!!!!
It USED TO WORK! I used to be able to install .CAB files. I have only installed 2 .cab files into internal memory (NO external. dont have one yet). I installed Opera Mini, and Wifi Radar. I also installed a couple of themes. I also installed animated themes but deleted them since they wouldn't work. (I think they required some other stuff). I also deleted all the themes except for one.
THEN one day, i tried doing that HardSPL-V7, and I got to the last step but quit since I got an error telling me that if I continue the (usb?)device could stop working.
Another time I tried installing SPB Finance 2.8 .CAB and that's when I noticed it would no longer install .CAB files. (It also won't install directly using .exe)
I researched Google and the forums, and found out a guy that had the same problem (no one responded).
Today I noticed that Pocket Wifi Radar wouldn't run. It said something about the certificates. I uninstalled it, tried to install it again, but it wasn't successful.
So far this has been the history of my 8525. Could it be because the "certificates" were installed in the ORIGINAL computer profile? Since I have installed Activesync many times, I noticed every time it creates a new profile. For example, the first time it was called "Windows PC". Then it was called "Windows PC2". Just right now I installed it again, and it was going to be named "Windows PC3", but I changed the name to something else, and of course it still didn't work.
Could ANYBODY give me some tips as to what I should do? Thank you.
go to settings>connections>usb to pc. uncheck "enable advanced network functionality".
if it syncs a few times with no problems run unlocker tool found in upgrades section. then hard spl then if you feel game enough upgrade os with one of your choice.
Hope this helps... cheers
holy cow, relax guy. you are not the only person to ever get the not digitally signed message.
http://www.google.com/cse?cx=000825...igned&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
as for the hardspl problem, i responded to that thread you created, didnt you see?
Ok, I tried what you mentioned ultra, and I got this message upon connecting the 8525 to the PC. (BTW, this is the SAME message that appeared when I was attempting to install HardSPL-V7),
HTC USB Sync
has not passed Windows Logo testing to verify its compatability with
Windows XP.
Continuing your installation of this software may impair or disabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing.
I pressed "Continue" and it installed HTC USB Sync. But then I got the a message telling me "Activesync 4.5 or greater needs to be installed" (even though it IS installed). I ran through the setup again, and it would only let me "repair" or "uninstall". I pressed "repair". Afterwards it asked me to "restart". I did. Then upon loading back up, I connected the 8525 to the PC again, and I got the SAME message again (the one about it not passing Windows Logo). This time I pressed "STOP" and then I got the message about HTC USB Sync not being installed in the computer.
I have been fed up with the problems the 8525 has been giving me. My Clie UX was so much easier to manage. Quick question, I am REALLY leaning on doing a HARD RESET, but I think/kinda know, that if I do, it will ERASE WM6 correct? And go back to WM5?
Oh and yes xtreme, I have searched this on the search bar. And yes, I know you replied back, but you were referring to the Hard SPL. I am having problems w/ installing .CAB files.
neojammer said:
Ok, I tried what you mentioned ultra, and I got this message upon connecting the 8525 to the PC. (BTW, this is the SAME message that appeared when I was attempting to install HardSPL-V7),
HTC USB Sync
has not passed Windows Logo testing to verify its compatability with
Windows XP.
Continuing your installation of this software may impair or disabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing.
I pressed "Continue" and it installed HTC USB Sync. But then I got the a message telling me "Activesync 4.5 or greater needs to be installed" (even though it IS installed). I ran through the setup again, and it would only let me "repair" or "uninstall". I pressed "repair". Afterwards it asked me to "restart". I did. Then upon loading back up, I connected the 8525 to the PC again, and I got the SAME message again (the one about it not passing Windows Logo). This time I pressed "STOP" and then I got the message about HTC USB Sync not being installed in the computer.
I have been fed up with the problems the 8525 has been giving me. My Clie UX was so much easier to manage. Quick question, I am REALLY leaning on doing a HARD RESET, but I think/kinda know, that if I do, it will ERASE WM6 correct? And go back to WM5?
Oh and yes xtreme, I have searched this on the search bar. And yes, I know you replied back, but you were referring to the Hard SPL. I am having problems w/ installing .CAB files.
Click to expand...
Click to collapse
dont hit stop dude, u're suppose to hit continue. hitting stop prevents the drivers from being installed and then the RUU wont run
Well I did press "Continue" the first time and I did not see any improvements. I just saw that it installed "HTC USB Sync".
I AM able to successfully install Activesync, I just can't get .CAB files to install.
Could it be because I pressed "STOP" whenever I tried using HardSPL? Should I try and run HardSPL AGAIN and this time pressing "Continue"?
Oh, and are you sure I'm supposed to press "Continue"? After all, I do get that error about Microsoft strongly recommends that you stop this installation. It sounds fishy pressing "Continue".
I just installed Activesync ALLLL over again, but this time in the D:/ drive... still the same .CAB problem.
Oh, and I no longer have the problem where Activesync would uninstall by itself. I noticed it fixed itself yesterday.
BUT I'm still having problems installing .CAB files.
1). hard reset will reset it back to factory its true BUT, and like j-lo's this is a big but, it will re install the last os on the phone (wm6) NOT the stock rom...
2). are you installing the .cab files from the computer or copying them to the memory card and installing from there?
If you install the .cab from the memory card it seems to work fairly well (at least from my experience). if its in a .exe format then it runs from the computer and requires activesync. if you have the .cab file then my suggestion is try to run it from the memory card.. Cheers..
Try installing the SDK certificates and see if that helps
Finally Works!!!!! Hard Reset!
OK, so I've been up for about 3hrs straight trying to figure this out. Reinstalled/uninstalled activesync... tried installing HardSPL again (twice)... didn't work. So I was like, you know what...f* it. I'm going to do a Hard Reset. I'm just gonna try it.
IT WORKED!!!! AND IT STILL STAYED IN WM6!!!! And I think it's still unlocked (although I've read from threads that a HR will disable the unlocked feature).
I AM GLAAAAD THAT I CAN INSTALL FILES NOW!!!! YAY!! (hehe). THANKS TO THOSE WHO TRIED TO HELP!!! SERIOUSLY. It feels really bad when no one tries to help you, even though you don't have a CLUE as to what to do.
** I solemnly swear I will no longer try to use HardSPL or try flashing to a different ROM*. I will use the ROM that came with the phone, and be glad everything is WORKING **
*= at least for until a couple of more months
AND for those who are having this problem (and it's a lot of ppl, based from search results), try a HARD RESET. It helped me anyways.
"and like j-lo's this is a big but"
Glad it worked but I wouldnt allow one bad experiance to turn you off flashing... If I were you I'd still flash hard spl ( in case you find something that you really like). It DOES make it easier to fix "bricks". But just to satisfy your curiosity, go to bootloader and see if it says that you have 2.10 or 2.30 SPL. Also if you want to try flashing, try the sd card method. Its a heap safer (from my experience) than flashing by activesync. Check the wiki for how to do it.
PS. you dot need to reformat the sd card. if you have all the stuff you want on it then just copy the .nbh to the root of the sd card and rename to "hermimg.nbh", it will load as soon as the hermes is put into bootloader and you wont have to re-install anything. Works every time for me and I've done it about 30 or 40 times...Cheers......
ultramag69 said:
1). hard reset will reset it back to factory its true BUT, and like j-lo's this is a big but, it will re install the last os on the phone (wm6) NOT the stock rom...
2). are you installing the .cab files from the computer or copying them to the memory card and installing from there?
If you install the .cab from the memory card it seems to work fairly well (at least from my experience). if its in a .exe format then it runs from the computer and requires activesync. if you have the .cab file then my suggestion is try to run it from the memory card.. Cheers..
Click to expand...
Click to collapse
i think his problem is that he can't install .cab files period. he's having the same problem as me. my first phone had that prob, i updated .net 2.0 and it was fine. got my second phone here, update .net to 3.5, but still can't transfer/execute ANY cab files to my phone. the pc just doesn't recognize the phone period. i can't copy/paste, can't push anything through onto my phone. it's crazy. so what else can we do? i'd like to think i'm pretty tech savvy, but this isn't cool LOL
Hello,
now I cannot execute a 'not signed' .exe from my diamond, because of the 'not signed' error message.
I tried to see the first steps of the android port on the diamond touch. I had to remove the battery to stop the application. Since, it's not possible for me to execute any non-signed application (total commander, putty, ...).
Did you find a clean solution? I prefer not to go through the steps of reinstalling a new firmware (windows isn't accessible on my computer & I have a rather old backup of my diamond's files).
I allready have a hardspl, because my orginal ROM is from SFR (french operator)... and I prefer the original HTC version which is more beautiful & more uptodate.
geh said:
Hello,
now I cannot execute a 'not signed' .exe from my diamond, because of the 'not signed' error message.
I tried to see the first steps of the android port on the diamond touch. I had to remove the battery to stop the application. Since, it's not possible for me to execute any non-signed application (total commander, putty, ...).
Did you find a clean solution? I prefer not to go through the steps of reinstalling a new firmware (windows isn't accessible on my computer & I have a rather old backup of my diamond's files).
I allready have a hardspl, because my orginal ROM is from SFR (french operator)... and I prefer the original HTC version which is more beautiful & more uptodate.
Click to expand...
Click to collapse
I've got the same problem. please help
sascha.egerer said:
I've got the same problem. please help
Click to expand...
Click to collapse
I finally done a hard reset, and now all is OK.
No other solution found.
geh said:
I finally done a hard reset, and now all is OK.
No other solution found.
Click to expand...
Click to collapse
Trying the same thing for my Diamond after trying out Android on it.
Same problem here. Running android 1.0 got me into this trouble.
(Running android 0.8 multiple times did not cause this problem.)
Did anybody find a better solution than hard reset?
Re
Same problem here cant run .cab files after trying run Android 0.8.
Damn , dunno why i tried to run Android 0.8
I tried both version for WM, neither worked. Thanks
The one to download from skype.com worked on mine.
sthoeft said:
The one to download from skype.com worked on mine.
Click to expand...
Click to collapse
same here. fring also worked fine
I`m getting sound on speker ?!?!?
how to change it to headset?
Its working now. Didn't work if download it cab file directly from the website, but setup through pc worked.
Same here, the sound comes out from the speaker on the back, then I put on the headphone, worked like a charm
Skype and Xperia X1
Have tried installing skype (version 2.2045) using both direct pc and .cab file methods. In both cases, I get the error: couldn't find all the necessary files to start skype. please try to install skype again. skype will now close."
No luck after trying again (several times!). Grateful for suggestions.
ndnikoi said:
Have tried installing skype (version 2.2045) using both direct pc and .cab file methods. In both cases, I get the error: couldn't find all the necessary files to start skype. please try to install skype again. skype will now close."
No luck after trying again (several times!). Grateful for suggestions.
Click to expand...
Click to collapse
Which version did you try? http://www.skype.com/intl/en/download/skype/windowsmobile/
Pocket Pc Pro or Standard? The first is for the X1.
hello
you need to install it from PC only as cab file does not work at start up says some files are missing .
Bxsteez said:
same here. fring also worked fine
Click to expand...
Click to collapse
Fring works fine?? Which version did you installed? Is it perfect??
Thanks
It works, but you'll get the sound through speaker. If you want ot solve this, ther is a thread which has a solution for it.
I've got some troubles
1. Downloaded "Skype 2.5 Beta for Windows Mobile" for PC installation exe file from skype.com
2. installation runs properly and soft installed on "\Speicherkarte" (I've got German version of X1).
3. account created, login to skype Ok
4. WiFi up and running
5. skype is running, add contact is fine as well
6. call contact ---> application crash
what to do, how to fix it?
PS. all about this "Current Pocket PC version: 2.5.0.108. Release date: December 9, 2008."
dimi_p said:
I've got some troubles
1. Downloaded "Skype 2.5 Beta for Windows Mobile" for PC installation exe file from skype.com
2. installation runs properly and soft installed on "\Speicherkarte" (I've got German version of X1).
3. account created, login to skype Ok
4. WiFi up and running
5. skype is running, add contact is fine as well
6. call contact ---> application crash
what to do, how to fix it?
PS. all about this "Current Pocket PC version: 2.5.0.108. Release date: December 9, 2008."
Click to expand...
Click to collapse
I got the same problem
damn 2posts :/
Mine works perfectly fine
Downloaded it to my laptop plugged my phone in and installed it
dimi_p said:
I've got some troubles
1. Downloaded "Skype 2.5 Beta for Windows Mobile" for PC installation exe file from skype.com
2. installation runs properly and soft installed on "\Speicherkarte" (I've got German version of X1).
3. account created, login to skype Ok
4. WiFi up and running
5. skype is running, add contact is fine as well
6. call contact ---> application crash
what to do, how to fix it?
PS. all about this "Current Pocket PC version: 2.5.0.108. Release date: December 9, 2008."
Click to expand...
Click to collapse
I have the same problem: I tried the cab and the setup over pc
Have somebody an idea?
I had the same problems on my xperia (application crash). Now i am using skype version 2.2.0.45 and it's working fine. you can download the german version here:
http://download.chip.eu/de/Skype-fuer-Windows-Mobile-2.2.0.45_175554.html
Issues so far:
-splash screen only vga, but app uses full screen
-sound through speaker, have not tried headset yet
norti said:
Which version did you try? http://www.skype.com/intl/en/download/skype/windowsmobile/
Pocket Pc Pro or Standard? The first is for the X1.
Click to expand...
Click to collapse
so when we dl from the link that u listed, we dl the pocket pc version?????
cuz when i checked on the site they said that x1 is a smartphone...
sry im kinda lost..
The last version i tested of skype on X1 worked, called, but sound is being routed to the speaker!
there was one small program, Troca2 (search for it) which will route the voice to the earpiece. but don't leave it running after you finish, as everything will be routed to the earpiece including ringing and notifications.
instead of skype, you can use fring, using your mobile, connect to the internet (WiFi or Active Sync doesn't matter), go to www.fring.com from internet explorer and download the application.
once you set it up, register and do all the configuration correctly of skype, go to the options and check the Use Earpiece option.
Fring is working perfectly for me
cheers
Fring works great for me, too. I am using version 3.34, but I heard there is a 3.5 out there now. The only thing I don't like is that the system lags during login, especially if you have a lot of people on your buddy list.
Fring worked with me as well
Fring worked with me fine as well, and the sound came out of the speaker..