Database Users

Pocket Bluetooth Tools Version 1.1.0.0 problems

OK i have install Pocket Bluetooth Tools Version 1.1.0.0 on my SPV M500, but when i pair a device, the menu just flashes up and then disapears and nothing. If i go in to activeSync i also do not have the option like the website shows
Help is needed or do i need to use another version
Thanks
Brian

You will need to unstall the latest version and install the following version:
BTHTools1012.exe
This one works for me!

Panja said:
You will need to unstall the latest version and install the following version:
BTHTools1012.exe
This one works for me!
Click to expand...
Click to collapse
The latest version gives a lot of stability problems on my MDA Compact. After 2 of 3 on/off-switches of bluetooth I have to reset my MDA. After installing the previous version I have no problem anymore.
By the way: there is a way to use the latest version of Pocket Bluetooth: when you pair your device and get the "flashing" screen from Pocket Bluetooth, go to the Today screen before you finish the pairing!
There you will find the Pocket Bluetooth screen. Select the COM-port and finish. Then go back to the bluetooth manager en finish the pairing.
I hope you understand my explanation. It worked for me.
But as said before: the latest version is not stabile, choose the previous.

thanks for your help, will try that
:lol:
Brian

why should one use Pockte BT tools with Magician?
Thought the BT Stack is good enough these days (well: final Himalaya versions were good enough also)

edsub said:
why should one use Pockte BT tools with Magician?
Thought the BT Stack is good enough these days (well: final Himalaya versions were good enough also)
Click to expand...
Click to collapse
I'm using it because I had problems getting active sync to work.
With BT Tools it works after 10 sec

You can use any task manager like MortButtons to switch to the BTTools before finishing the pairing.

thanks
pietrucci said:
The latest version gives a lot of stability problems on my MDA Compact. After 2 of 3 on/off-switches of bluetooth I have to reset my MDA. After installing the previous version I have no problem anymore.
By the way: there is a way to use the latest version of Pocket Bluetooth: when you pair your device and get the "flashing" screen from Pocket Bluetooth, go to the Today screen before you finish the pairing!
There you will find the Pocket Bluetooth screen. Select the COM-port and finish. Then go back to the bluetooth manager en finish the pairing.
I hope you understand my explanation. It worked for me.
But as said before: the latest version is not stabile, choose the previous.
Click to expand...
Click to collapse
thank you - this has worked for me after hours of research!!

Qtek 9100 + MS voice Command

Have a problem, I´m not able to install MS voice command on my 9100.
No problem with S100 runnin W2003.
But Is it it compatible with w2005?
Every time I try to do this is says: cannot install.
Why?
Please help, really want it on my 9100!

which version of voice command are you trying to install?

1.0, and then upgrade to 1.5..
That´s the only files I have. But I cannot get 1.0 to work, so its pretty hard to upgrade to 1.5...
But it worked to do this on S100

I had the same issue. I dont have it in front of me, but here's the process.
Install version 1.0. In the activesync application manager, uncheck version 1.0 so that it uninstalls from the PDA but not from the desktop. Install version 1.50.
After it goes through its install process, make sure that its checked in the activesync app manager.
Hope this helps, I had to do it a couple of times, (check version 1.0 to install, then uncheck again).

cnegron said:
I had the same issue. I dont have it in front of me, but here's the process.
Install version 1.0. In the activesync application manager, uncheck version 1.0 so that it uninstalls from the PDA but not from the desktop. Install version 1.50.
After it goes through its install process, make sure that its checked in the activesync app manager.
Hope this helps, I had to do it a couple of times, (check version 1.0 to install, then uncheck again).
Click to expand...
Click to collapse
Thx so much.. had to install, uninstall about 30 times, but now it works!!
Txh!

Hi!
I've tried voice command 1.5 on a qtek 9100 and it is really slowing everything down so much I had to turn it off. Starting programs, switching between them and using any program is a real pain with Voice Command enabled :-(
Does any of you have the same problem?
Regards,
// aste - writing this on the phone

Sorry no problem for me on a Qtek 9100...

I had Voice command 1.5 on my Magician (MDA Compact) which worked fine, I put it on my Wizard (Vario) and it was slowing it down so I transferred it to Storage card and it appears to be better. Only problem is on soft rest it says voice command cannot be found and you have trouble removing the warning box it sticks around for ages. When installing it also says...won't work properl on storage card, put on phone or something, but it works just fine.

monkeyphonix said:
I had Voice command 1.5 on my Magician (MDA Compact) which worked fine, I put it on my Wizard (Vario) and it was slowing it down so I transferred it to Storage card and it appears to be better.
Click to expand...
Click to collapse
I've got it installed on my Vario (on the phone) and it's not slowing it down at all.
Odd...
Cheers,
AJ

Any one successed to syncing with Vista RTM??

Although it was working with RC2, strangely, it doesn't with RTM, the driver is installed but only the file transfere is working. I can see an icon of my JJ in computer (ex. my computer) and when click on it, i can browse the JJ ram and the storage card only, but there is no any syncing capabilities. Any one has an idea about that problem. May i am going to try the old RC1 trick:
http://www.microsoft.com/downloads/...roductID=7C1FA894-B2C5-41BE-8D97-E145DD2A883B
Still there is no respoonse after 26 viewers, does this mean that there is no one has installed the new vista RTM release or I am asking a selly question?
_____________________________________
JJ with AKU 3.2 1.90.96

Yes, I synced my HERMES with http://www.microsoft.com/downloads/...6a-a72d-4aef-9663-31ce2fefbada&DisplayLang=en this tool, but sometimes don't, lot of crashes...

Just have a try:
disable any Anti-Virus and Firewall softwares.

I tried downloading the sync tools beta, but fiind it hangs outlook (2007).
I'm going to give it a try just running wirelessly and see how I get on.

The same don't know why it's not working...

sergiopi said:
Yes, I synced my HERMES with http://www.microsoft.com/downloads/...6a-a72d-4aef-9663-31ce2fefbada&DisplayLang=en this tool, but sometimes don't, lot of crashes...
Click to expand...
Click to collapse
I tried it, it worked, thanks. The difference is that i followed the trick mentioned above also, i added the registery key WHOS, then installed the WMDC beta program, so, will try to use the WMDC program only without the registery in another installation.

Now I sync 95% of times, I just unchecked in settings-> connections->USB to PC-> use enhanced USB

I have managed to get it working after having reflashed the rom on my phone (probably not required) and re-installing the Windows Mobile Device Centre beta 3.
I think the trick is to make sure your phone can connect to Vista OK before you install the WMDC software and then install the software with the phone connected.
Good luck

Are you also able to flash / upgrade the phone using Vista RTM and MDC beta 3? I'm not

Symantec pcAnywhere mobile on HD

Hi!
Had someone tried to run Symantec pcAnywhere mobile on Touch HD?
I've got the following Problem:
Installed by .cab-File
Started, works great on this huge Display!
...but: After rebooting my PPC the following happens:
If I try to start now, it dosen't work anymore.
It seems, some components are missing.
What can I do?
Thanks,
Nomel

Hi Nomel, i have the save issue's. after several soft and hardreset and different installation of applications, i also find the error in symantec pc anywhere mobile.
i don't know how. but after a hardreset and a clean system i install only pca mobile. works first fine. but if you softreset your hd you cannot anymore run or reinstall it !!!!
yesterday i tested with making a backup before , softreset and the same !!!!!!!!!!!!!!!!!!!
at moment i have no solution.

Symantec pcAnywhere mobile install on HTC Touch HD
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.

I have been using PCAnywhere for months with no problems after many soft resets.

mpconti said:
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.
Click to expand...
Click to collapse
I'm having the same problem. I'm using NFSFAN's custom ROM on my HTC Touch. Only on his later 2 versions does this problem occur. I believe he got the ROM build from the Omnia....
So, the problem could be some kind of conflict between the program and these newest builds of WM 6.1.
Damn....

I have the same problem with rom 1.56 ITA . with the previous version everything was ok even after softreset. with the new one I find the described error during install

htc touchpro2 pcanywhere solution
i have installed pcanywhere 12.5 on my htc touchpro 2 and it worked great until i soft reset it (powered down and up again) and i get the same problem. wont run and wont reinstall. so i threw pcanywhere 11.5 in the ol' cd rom and just installed the moble onto my phone and it works just fine. i still have 12.5 installed on both my machines and the mobile 11.5 connects to my xp box great. not sure about vista or win7. try that guys. hope it works!

This worked for my Touch Pro 2
I found this fix somewhere (don't remember where).
But if you rename
MFC80***.DLL to MFC80***.dll
there are a few of these files in the Windows directory.
I used resco explorer and hit rename and it automatically made the .DLL to lowerecase .dll and voila, pcAnywhere mobile worked.
You may have to do a fresh, new install and then do the rename before a reboot.
I hope this works for you.
(windows directory of the phone)

Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.

kbriaz said:
Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.
Click to expand...
Click to collapse
This is actually the HD forums. You'd be better asking this in HD2 forums

HD2 and TomTom Home

Hello all, I installed TT7 on HD2 and it works very well.
Now I would like to update maps from TomTom Home, but it can recognize HTC HD2...
Is there any tricks for that issue??

i haven't found one yet - also searching! But I can tell u, what the german tomtom-hotline said:
You are the first one with this problem. This phone is too new . He wants to check, if tomtom will start supporting the Leo and give me a reply. I'll keep u up 2 date - but everyone should give them a call, for that they see how many costumers they r loosing...

TomTom Home
I think you need another version of TomTom Home or you have to swap some of the files to get it to recognise your HD2.
I found this information somewhere on the internet, and tried it with my HD and a friend's HD2, which worked... I'll post that information here when I find it...

I'd appreciate that info please.
The cab file I have from my Diamond won't install on the HD2 and TomTom Home doesn't recognise my HD2 at all.

alfakilocharlie said:
I think you need another version of TomTom Home or you have to swap some of the files to get it to recognise your HD2.
I found this information somewhere on the internet, and tried it with my HD and a friend's HD2, which worked... I'll post that information here when I find it...
Click to expand...
Click to collapse
u would make my day

Same here - i have also ran into the same problem. Need Help too...please

Try the instructions from this link:
http://forum.xda-developers.com/showthread.php?t=530792
Hope it works out for you all.
P/S: Lei Chat, try the TomTom installation file from there. It should work, I installed it on my HD, will install it again on my HD2 when it arrives.

Sadly, after changing the tthome.jar tomtomHome doesn't start correctly. I get the following errors:
First:
ERROR: ContentLength not available (not a local URL?)
Stack:
0. file:///C:/Program%20Files/TomTom%20HOME%202/xul/app.jsm:73
} catch (e) { error(e); };
Second:
ERROR: ReferenceError: gApplication is not defined
in chrome://tthome/content/ui/mainwin/mainWin.js:45
Stack:
0. function () chrome://tthome/content/ui/mainwin/mainWin.js:45
gApplication.start();
1. function onLoad() chrome://tthome/content/ui/mainwin/mainWin.js:15
gMainWindow.start();
2. function onload([object Event]) chrome://tthome/content/ui/mainwin/mainWin.xul:1
<?xml version="1.0"?>
Third:
ERROR: ReferenceError: gApplication is not defined
in chrome://tthome/content/ui/mainwin/mainWin.js:48
Stack:
0. function () chrome://tthome/content/ui/mainwin/mainWin.js:48
gApplication.quitApplication(true, false);
1. function onLoad() chrome://tthome/content/ui/mainwin/mainWin.js:15
gMainWindow.start();
2. function onload([object Event]) chrome://tthome/content/ui/mainwin/mainWin.xul:1
<?xml version="1.0"?>
I'm using Win 7 Prof. in german. From the first error I expectet the path to be wrong. The folder in which programs are stored has a german name. So I wanted to create the folder "Program files". This wasn't possible. It already exists. So the german folder seems be named in the english version, but just shows an a german to the users...

Thanks for the response.
That cab file does indeed install but it fails at the download free map stage.
I get the same errors a k82 when replacing the tthome.jar file.
That guide mentions needing to manually install the maps, so it's not really fixing the TomTom Home connection issues.
I know the backup location of my map files as it's possible to access that in TomTom Home, but I've tried copying them onto my memory card on my device but the software doesn't acknowledge they're there, running the activation .cab in the map folder didn't work either.
Will probably just have to wait for TomTom to updated Home and add the HD2 to the supported devices list.

Reply to kollege82
Mmm... I'm sorry, but I don't know why it's not working for you. It could be a language issue, as it is working on my English Windows 7 Home Premium PC. I was using an older version of TT Home when I followed the file swapping instruction, so it may be a TT Home Version Issue.
Reply to LeiChat
Even though the guide explains the process of downloading the initial maps for your device, it does show a solution to getting the HD2 to talk to TomTom Home. I'll try this on another PC, and report back here.
P/S: I have just tried this solution on a newer version of TomTom Home, and it doesn't seem to work anymore... I guess we will need to wait for TomTom then... Sorry for getting your hopes up high...

The mentioned fix of Noiz was actually a fix made bij pmuschi and was not a fix for connection issues indeed.
I tried to make my own fix for the latest TomTom Home using his method:
Modify the file "\content\logic\model\ttNavItem.js" (in the jar) so that the functions canInstallOn() and canUseOnThisDevice() both return zero
Click to expand...
Click to collapse
This will not give the error mentioned by kollege82 in #8, but it still doesn't fix the connection issue

Hi @ all,
I get a connection to TomTom Home - but only with an older Version:
I have TomTom Home Version 1.5 on my PC, and the HD2 will be recognized.
I also have the newest (?) TomTom Home version 2.7, but this version does not recognize my HD2.
I had this problem already a long time ago with another device, that's why I never deleted the old Version 1.5.
Perhaps the new TomTom Home version only works if the storage card is connected directly to the computer?

pinobigbird said:
The mentioned fix of Noiz was actually a fix made bij pmuschi and was not a fix for connection issues indeed.
I tried to make my own fix for the latest TomTom Home using his method:
This will not give the error mentioned by kollege82 in #8, but it still doesn't fix the connection issue
Click to expand...
Click to collapse
That's strange... It seemed to work fine for me, allowed my device to connect and sync with TT Home. In my opinion, I think it's because of the newer TomTom Home Versions that may be causing this problem, like what 'Jolig' has said.

Jolig said:
Hi @ all,
I get a connection to TomTom Home - but only with an older Version:
I have TomTom Home Version 1.5 on my PC, and the HD2 will be recognized.
I also have the newest (?) TomTom Home version 2.7, but this version does not recognize my HD2.
I had this problem already a long time ago with another device, that's why I never deleted the old Version 1.5.
Perhaps the new TomTom Home version only works if the storage card is connected directly to the computer?
Click to expand...
Click to collapse
Could you please upload version 1.5??
Also, did you try to download mapshare with v1.5 + HD2 ??

Lord Spectre said:
Could you please upload version 1.5??
Also, did you try to download mapshare with v1.5 + HD2 ??
Click to expand...
Click to collapse
Yes, I would greatly appreciate that too!!!!

Hi,
I have uploaded Version 1.5 here:
http://www.sendspace.com/file/pn9flo
But remember, we still have the disatvantage that this "old" Version 1.5 recognizes the Leo, but we will not have as many functions as in the new TT Home versions - this also includes NO Map Share, as far as I know....!
Perhaps someone has a bit time to check if it is possible to connect the Micro-SD directly to the computer - will the newest TT Home Version recognize the Micro SD card as a "TomTom device"?
Furthermore; I don't understand why TomTom sells Navigator 7 and it is not recognized by the latest TT Home Version - I can't figure that this only depends on the HTC Leo?? Has perhaps someone contacted TomTom concerning this issue? Of course I also would like to use the latest TT Home version in order to have Map Share and so on...

I contacted TomTom support and they stated that they were working on a new release of TomTom that supported HD2 and that it hopefully would be released before the end of the year. And they couldn't tell if it was a free upgrade or something you needed to pay extra for.
The also said that it was a mistake that their website listed Touch Diamond 2 og Touch Pro 2 as compatible and that they are working on correcting the list and that was a week ago!!!!!

Just to add my experience with TomTom support.
The lady I spoke to seemed to think the HD and Pro 2 were both supported as per their website.
http://www.tomtom.com/products/section.php?ID=898&Section=709&Lid=1&Category=2
No timescale was offered for when an official update to "Navigator 7" or "TomTom Home 2" featuring HD2/Leo compatibility would be available.
I'm not really sure how much use getting Home 1.5 linked to an HD2 would be if you've purchased your maps since the launch of Home 2.
I managed to install the suggested black cab file but adding my map file to the device manually just caused TomTom to prompt for authorisation. Although www.ttcode.com still exists I don't have a product ID for my maps in my tomtom.com account so can't get past step one.
When I rang I was hoping the lady might be able to give me that, but as I've just mentioned, since Home 2, it (apparently) doesn't work that way anymore.

No worries, thanks for trying and letting us know.

I too cant get connected with tomtom home but had the same problem with my xperia x1 when it first came out it took a couple of updates of tomtom home before it recognised the x1.