Database Users

WM2005 Bluetooth Activesync issue

I've flashed my device with WM2005 yesterdag, and I love it. I don't have any problems yet with unmapped buttons, USB Activesync etc.
But I do have some problems with Bluetooth Activesync. It doesn't work whatever I do.
I've installed ActiveSync 4.0 latest build, and USB sync'n works fine.
I've deleted the partership, and paired the device with my Sitecom Bluetooth USB adapter.
My WM2005 tells me that I've 3 available services (Headset, Serial Port and Dailup Networking). I've selected all of them except Headset. Than I started Activesync on my device and selected Connect via Bluetooth; After that I'm told there are no bluetooth partnerships with a PC that supports Activesync. And I'm asked to set up a partnership.
I did again, deleted the complete partnership on both pc and device; recreated the partnership and tried again. Same problem. After that I manually created incomming and outgoing comports which resulted in the same problems.
The strange thing is, that I see the comport service shortly in my Bluetooth Places but than disappears.
Can someone help me to get Activesync via Bluetooth working?

HotSync & ActiveSync 4 on the same PC

I'm having problem to sync my devices (Treo 650 & iMate JasJar) to the same PC. Each time I try to sync one of these devices, the given device connects to the first BT serial port service defined in BT manager on the PC (Widcom BT stack) whatever the service it is. To be more specific, if I create virtual BT COM5 as a HotSync service and the COM9 as a ActiveSync, both devices try to connect to HotSync (the first BT COM port available). I have also an iPAQ hx4700 and it works ok. I haven't had any problem to sync with ActiveSync 3.8 as well. Anyone with the same problem?
Also I'm having problem to sync some of reoccuring Outlook appointments to the JasJar devices. The are simply ignored by ActiveSync 4. Anyone?

cannot connect internet through bluetooth/IR activesync!!!

I don't know why i cant. I can connect internet through usb activesync.
Before, my O2 Atom, Hp 6828 and dopod 838 pro can.
I tried hardreset but i still have problem.
Anyone have problem?
PS: Dopod D810 Chinese

Create incoming BT port on PC.
Set Activesync on PC to allow connections to that port.
Open up PPC, pair with PC (while NOT connected to USB), make sure ActiveSync service is available on the device.
Remove all proxies from PPC connection settings.
Turn off firewall on PC (just in case).
Connect to PC via BT from PPC ActiveSync. It should work.

thx first
already follow your step, still cannot
my D810 can do bt /irda activesync, only cannot connect internet via bt activesync/irda activesync
i tried bt activesync in my destop and irda activesync in laptop, both have problem~

Activesync (PC) complains when bluetooth isn't ON

I've managed through pain and misery to get Activesync to work through bluetooth (not easy with widcomm stacks as drivers).
When my PC boots up, Activesync (PC) will complain that the bluetooth COM port isn't connected (obviously because my phone isn't connected through bluetooth 24/7)
So everytime I reboot my PC, I have to re-check the COM port connection in the connection options (PC) to make Activesync listen to my bluetooth COM.
Any suggestions?
Also, I know that when my phone is connected via USB, my phone will gain access to the internet (My PC has the internet connection and shares it to the phone). With bluetooth I havent been able to get this to work. Yet both USB & bluetooth work through Activesync. Is there something Im missing?
Thnx! I hope this isn't too specific/complicated like question

I used to have some of the same problems. What I found that usually it was 2 things causing it.
1. Activesync - Installation or Configuration
2. BT Software - Installation, Configuration or Need BT Software upgrade
What fixed my issue was 2 fold: activesync settings & needed to upgrade my dongle's software.
Activesync: When I installed 4.5 it setup a network connection that kept running in. And when I started up my PC I could see the icon running in my sys-tray (and would have troubles on and off again either with bluetooth / USB sync. What I found that worked for activesync was uninstall and make sure you check off allow wireless activesync connection. I've also found it likes to use com 3 for BT activesync.
BT Dongle: I have Motorola PC850 dongle and found that there was a great new BT Stack update that would hold the settings even if I turned my PC off for weeks at a time or removed the dongle to somewhere else. Plus it fixed the issue I had with using my BT stereo headset, to listen to music with out pops and skips. Oh In your BT settings make sure that com 3 or what ever your using is the same as activesync

Hope I can test those few tweaks.
However, after connecting my phone to activesync by USB, now my phone won't even connect by bluetooth to my PC anymore.
STUPID STUPID bluetooth stacks

connecting 2020 via bluetooth in activesync

i'm using ivt corporate bluesoleil and qtek 2020 wm5
can't connect via bluetooth
neeeeeeed help plz

http://www.geekzone.co.nz/content.asp?contentid=2417

i said ivt corporate bluesoleil
plz post specific directions

dont know the software you can try to look at the other guides for bluetooth they got on their site
or try the general thing with making a virtuel bluetooth comport and use that for activesync
or try to update the bluetooth software on the pc

...
Hi,
got the same problem with that ugly bluesoleil bluetooth stack; cause I'm running WM6 I had the choice of Com0-Com9, but that bluesoleil stack only delivers com-ports starting from Com11. The Windows Bluetooth stack wasn't available.
Workarounds didn't work. At last I got two correspondending COM Ports but the Connection with Activesync was disabled after a short while.
So I will buy another Bluetooth stick which uses Windows or Widcomm Bluetooth Stack.
So long
HonkBB

I succed to connect via bluetooth with WM6. I use windcomm bluetooth donggle in my PC. When I install the driver,which came with the donggle, the problem begin. I cannot connect my Hima to the PC. Then I delete the driver from windcomm and use only the driver from windows XP sp2.
1. Turn on the bluetooh from your PDA so that your pc can recognize your hima
2. explore your bluetooth connection on your pc, make your incoming port, and remember the port which automatically provide by the pc.
3. Open your active sync from your pc, open the connectio setting. Checkbox the "allow connections to one of the following" anda chose the port that you have just made in steps 2. And press ok
4. Open active sync, and from menu press connect via bluetooth. If your device haven't paired yet, then the next step to make pairing as usual
5. After you finish pairing step, you are ready to sync via bluetooth