Related
Has anyone managed to activesync the Jam via bt, with xp service pack2 (that needs no drivers for bt)? I have tried a lot, and followed some guides on the internet, but nothing done yet I have a german mda compact, with englidh imate tom 1.03.
Maybe this helps :wink: MOD EDIT: Personalised URL link removed
that's what i have done, but when i press activesync via bluetooth, it sais that cannot connect to this port, because is already in use or not valid
Tonight i have 2 setup all the stuff again because i reinstalled my compu. I'll check if everything in the tutorial is ok... :wink: (I'm almost sure there some wrong things in it :? )
ok thanks
I also have no success with ActiveSync / Bluetooth / WinXP-SP2
Bluetooth works although. Using the WinXP SP2 bluetooth icon (bottom right next to the clock), I can 'Send A File' to the MDA. The file nicely ends up in 'My Documents' in the MDA.
So, Bluetooth on the WinXP-SP2 and MDA machines both work.
But, ActiveSync, no way. Activesync on the pc just does not want to detect the MDA. I already changed the BT com ports to 4 and 5 because I read somewhere ActiveSync only accepts ports from 1 up to 9.
Is there somebody who actually got WinXP-SP2 and the MDA working with Activesync?
i found this, but i have not tried it yet. i will try at noon.
http://www.mobismart.net/forums/Default.aspx?g=posts&m=2276
what a french forum? great! lol
Works fine for me.
Set up a COM port on your computer, then selecdt that port in ActiveSync. Pair the two devices to create a Bluetooth link. Then run ActiveSync->Tools->Connect via Bluetooth... on your Magician.
Skip
Works fine for me 2. So the issue is not SP2. It has more to do with your Bluetooth or ActiveSync configuration I think. Can you pair the devices to start with?
Same here, works perfect on Windows XP SP2 using the previous 3.7.1 and the new 3.8 ActiveSync on bluetooth.
I had gone through much pain with the Widcomm (not sure about spelling anymore) driver installed but without any success in getting my Dopod818 activesync to work.
So I uninstalled it, and let WinXP SP2 detect the USB BT device again and download by itself the SP2 driver. Then followed the steps in Benjamin's MDA Howto article above (with the only exceptions being that you don't need to set the incoming and outgoing serials as com4 and com5 on your PC), now my Dopod818 is activesyncing with my PC flawlessly.
I tried everything both with Widcomm and Microsoft bluetooth
I think the problem is related with my MDA Compact. When I go to ActiveSync on MDA and choose connnect via bluetooth - it does not give any connection message. With IRDA or USB it says "Connecting to host". Probably something wrong with MDA setup. I have T-Mobile English WWE 1.01.00, ROM version - I'l try to upgrade to newer ROM and then check
Re: I tried everything both with Widcomm and Microsoft bluet
vanvan said:
I think the problem is related with my MDA Compact. When I go to ActiveSync on MDA and choose connnect via bluetooth - it does not give any connection message. With IRDA or USB it says "Connecting to host". Probably something wrong with MDA setup. I have T-Mobile English WWE 1.01.00, ROM version - I'l try to upgrade to newer ROM and then check
Click to expand...
Click to collapse
I had a hard time configuring ActiveSync to work through Bluetooth but it finally worked (with XP SP2 and not with Widcomm). I think the trick when using XP SP2 bluetooth stack is in the bluetooth pairing process (which is skipped in the Benjamin's guide).
The problem I think is that when the two devices are paired (the MDA and the PC) the MDA does not recognize the SPP (serial port profile) service of the PC and it does not assign the “Bluetooth Outbound com port” to the SPP service of the PC.
The steps that worked for me are the following:
1) Delete the device pairing from both the PC and the MDA (if you have
done the pairing before).
2) At the MDA go to Settings -> System -> Bluetooth settings and make sure the Outbound COM port checkbox is checked.
3) At the PC: open Bluetooth settings, go to COM ports, and add an incoming port (press the Add button and select incoming - nothing more).
(I call this port COM7 but it could be any other com port that your system assigns to the added port)
4) At the PC: add a new Bluetooth device (start the wizard) and follow the normal steps to pair the PC with the MDA. The MDA will notify you of the new paired device - press OK - do nothing special.
4) At the PC's ActiveSyc connection settings select the proper com port (COM7: the incoming com port created at step 3 above).
5) Run on the MDA the ActiveSyct and select the Connect via Bluetooth...
hope it works
My understanding (although I just got my first Pocket PCs) of the connection process is the following:
The ActiveSync on the MDA opens the "bluetooth outbound com port" (COM5) when you select the "Connect via Bluetooth".
This port must be assigned to a SPP (serial port profile) service of another bluetooth device (in our case the SPP service offered by the PC with the XP SP2 bluetooth stack. Note that the SPP service on the PC is connected to a com port (COM7 in my case)). If the Outbound com port (COM5) on the MDA is not assigned to a remote device then you get that error saying ActiveSyct can not open the port (when you try to Connect via Bluetooth)
Assuming that the MDA's COM5 is assigned to the PC's SPP service, when opening MDA's COM5 ActiveSync gets connected to the com port (COM7) on the PC.
On the other side, the ActiveSync on the PC is set to use COM7 as a connection port and it detectes the connection which is now opened.
The MDA's "bluetooth incoming com port" (COM4) as well as the bluetooth "Outgoing" com port created on the PC seams to play no role in the hole process.
atsois.
just wanna say i got it working with ms drivers and a very cheap bt dongle!
similar to atsois and leskip methods...
i setup the incoming com port in bluetooth settings and assigned activesync to that port BEFORE any pairing took place
i tried pairing from the PC, but no luck.. but when I paired from the phone, it worked!
excellent, thanks for all the help!
Before Activesync 3.8, mine would only work one time per reboot of the desktop PC. After installing Activesync 3.8, Bluetooth Activesync works everytime!
dj_linz6 said:
just wanna say i got it working with ms drivers and a very cheap bt dongle!
similar to atsois and leskip methods...
i setup the incoming com port in bluetooth settings and assigned activesync to that port BEFORE any pairing took place
i tried pairing from the PC, but no luck.. but when I paired from the phone, it worked!
excellent, thanks for all the help!
Click to expand...
Click to collapse
Thank you. I couldn´t make it work, but then I tried to pair the devices from the MDA - and it worked fine!
// Anders
Having installed my BT USB dongle after I installed Activesync on my PC, I didnt have the Connection settings in my PC's BT Settings. after setting up the partnership, AS on the JJ would always say i needed to setup a partnership again.
Baffled me for weeks, but today I fixed it, and its very simple to do....
Code:
In your PC's BT settings find the Local Services BT Serial Port, note the com port, in my case COM5.
In AS on the pc make sure the "Allow connections to one of the following" is checked and set to the same com port as the BT serial settings.
Thats it!!! no incomming or outgoing ports needed on the JJ, just go into AS and goto menu and hit connect via bluetooth, off it went and sync'd up, no questions asked.
This is very pleasing to me and I can now fix my work lappy aswell, which is where this will be really useful.
Yes yes it works. I was spending 2 mins connecting over BT every time i wanted to use AS.
Thanks.
i do it but nothing of nothing
THANKS A MILL!
after many days trying to get this to work, i finally got it nailed, keep up the good work guys
Big problem with Activesync by Bluetooth on JasJar
Hi,
I have already read more forum on this question.
I have e problem trying to connect by bluetooth to ActiveSync.
When I pair my JasJar to PC not appear the service ActiveSync, but Serial Port.
Therefore ActiveSync, on JJ, can't connect to my PC.
I have already configure ActiveSync on PC to connect on right Com port.
Please help me, i have lost some night to try it.
Trying to BT AS from my JasJar to my PC.
PC has activesync service setup on COM6
AS is listening on COM6
JasJar has outgoing COM set to 4
When I start a BT sync reports "Cant find existing Bluetooth Partnership that supports activesync." and asks for a search.
Run through the wizard and select my PC and its serial port. After finishing device will not start a connection.
Go back to activesync and try to connect via bluetooth and gives the "cant find partnership error.
Tried two different adapters on the PC and neither get it to work.
Anyone with any ideas?
Thanks!
Remove all the BT setting you have setup. Just follow the Help file on AS4.1 it works, really!
Tried all that and still not working.
Device just doesnt seem to initiate an outgoing connection.
ActSync connection problem!!
Did you fix the connection problem, think we are living the same case.
If you did fix would you please tell me what was the way?
thanks!
@Dave
From the PC AS, select File>Connection Settings and uncheck USB connection and select the BT COM port for Allow Connections. Then select "Connect" and wait till it tries all the connections and fails. Then selec Cancel and then try to connect from your Universal.
PS - I am assuming you have set-up the BT pairing using the Control Panel on the PC and Added the BT COM port from there as well
Hi,
Tried your suggestion. No luck.
PC is setup correctly. AS listening on COM6 (BT AS port as shown in my local services)
Jas doesnt seem top even initiate an outgoing connection. Get no blue indication on my desktop icon or on the port status item in the control panel.
Sorry to keep asking questions, but when you set-up the pairing between the PC and JJ did you get a Wizard on the PC that identified the ActiveSync service? Does the pairing info on the JJ say the PC provides a ActiveSync service?
I've had the same problem with my M5000, just solved it.
I removed the Toshiba bluetooth Drivers from the system and rebooted. WinXP SP2 found new hardware and proceeded to install what I assume to be standard MS Bluetooth stack. (DellHardWare.jpg)
Next, I deleted the bluetooth partnership from the M5000. I created a new partnership with my laptop, but initiated from the M5000. At this point, the M5000 didn't offer any services to use with the partnership. So, back to the laptop, creating a new incoming COM port (COM8),(DellCom8.jpg) and then set Activesync on the laptop to use that newly created port. (DellAS_connect.jpg)
Back to the M5000 bluetooth partnership, select the newly created partnership and click refresh (M5000btooth.jpg) This Time it offers me the activesync service. Tick the activesync service and then save.
Finally, on the M5000, from activesync select bluetooth connection...and that was it. Still working. Once I've disconnected and soft reset I'll try to make the connection again and report back. I'll also try to use the M5000 as a wireless modem and post results here.
FrankyG, great news. But I think the procedure you described is not that different from the AS44.1 Help file I suggested earlier.
i do it, but i doesn´t runs
Delete all your BT COM in control panel/system/device manager (select view and show hidden devices) by going to safe mode. Afterwhich restart your PC and try to pair again....it's always works for me
Hi,
I have already red more forum on this question.
I have e problem trying to connect to ActiveSync by bluetooth .
When I pair my JasJar to PC not appear the service "ActiveSync", but "Serial Port".
Therefore ActiveSync, on JJ, can't connect to my PC.
I have already configure ActiveSync on PC to connect on right Com port.
Please help me, i have lost some night to try it.
had same problem,you have to get rid of all phantom bt ports there is some stuff on windows support
Thanks for reply,
How can I remove phantom bt port?
Pozzame said:
Hi,
I have already red more forum on this question.
I have e problem trying to connect to ActiveSync by bluetooth .
When I pair my JasJar to PC not appear the service "ActiveSync", but "Serial Port".
Therefore ActiveSync, on JJ, can't connect to my PC.
I have already configure ActiveSync on PC to connect on right Com port.
Please help me, i have lost some night to try it.
Click to expand...
Click to collapse
Please, can someone help me?
On my computer and Universal, I find it easy to setup BT Active Sync if I activate the setup on the Universal first using active sync app. There is an option within the active sync app to sync via BT. The computer will then recognize the device and will ask you if you want to pair it. On the other hand, if I try to pair them beginning with my computer to search for the Universal, after pairing and ticking all necessary boxes, it still won't sync.
After pairing and ticking all necessary boxes. Make sure you reset BOTH your computer and the Universal.
The problem is that when I pair my Universal to PC, not appear the service "ActiveSync", but "Serial Port".
I've already tried to delete everything and reinstall bluetooth pen, with his drivers and with windows drivers, and ActiveSync too.
I've also deleted all pairs and all port on Universal.
But I've not obtained any result.
I don't know what to make.
Can someone help me?
Please.
Nobody has had my same problem?
Any idea, please?
I had the same problem until I upgraded from Toshiba BT stack to Wildcomm BT Drivers stack (4.0.1.700).
Things I have learned:
- If UNI is connected via USB then AS service will not show in device pairing on PPC.
- You need to create an incoming COM port on PC and set AS to allow connections to this port.
raad said:
I had the same problem until I upgraded from Toshiba BT stack to Wildcomm BT Drivers stack (4.0.1.700).
Click to expand...
Click to collapse
I haven't change the bletooth stack.
Until some week it makes worked regularly, but an evening, I was configuring my Laptop to use the JJ like BT modem, when the AciveSync service has begun not to recognize more like such, but like “Serial Port”.
I've already tried to delete everything and reinstall bluetooth pen, with his drivers and with windows drivers, and ActiveSync too.
I've also deleted all pairs and all port on Universal.
But I've not obtained any result.
Yesterday, I have tried the synchronization with an other PC with a fresh installation of windows, but the result has been the same one.
Therefore the problem is on JJ, even in the registry.
I don't know what to make.
Please, can someone help me?
Up
Please help me...
Don't know if this will help and I claim no credit because this solution was written in some other threads. For the universal with a Toshiba bluetooth on your PC:
first, pair your Universal with your PC, you get "serial"
On your PC, create the following "bluetooth local com" (Control panel)
- COM7 Toshiba BT Port (COM7) LocalCOM-Server[SerialPort(TOSHIBA LOcalCOM)]
- COM6 Toshiba BT Port (COM6) LocalCOM-Client
In your activesync, allow connection to COM7
Now comes the fun part. On your universal, go to your bluetooth settings, devices, edit your device and press "Refresh", possibly more than once. Serial Port will change to ActiveSync.
It worked for me.
Eric
Also got to the control panel on PC and delete the bluetooth modem that was created. When u add a new incoming port on PC make sure it's not COM8 because that is used by JJ for USB modem connections.
same on treo 750v
I have the exact same problem on my Palm treo 750v. Searched the whole internet for a solution and found some other people with the same problem but no resolution. The only recommendation that seems to work is to do a hard-reset.
The problem started on my device after I played around with the Soft GPS port. It seems that it screwed up some COM port references for good...
I had the same problem on my notebook with Toshiba's BT drivers. I uninstalled them and connected an external USB BT which fired up the MS default BT stack.
After I completed the pairing using Bluetooth Devices (in control panel) and clicking Add in the devices tab, I used the COM Ports tab and added an incoming port and copied the number of this com port in the AS connection settings.
Now, I initiated the AS over BT from the Jasjar and it said something like "it cannot find the service or whatever and would you like to create one". I clicked yes, when it took me to the list of paired devices. From here I did what leblan has also noted "your device and press "Refresh", possibly more than once. Serial Port will change to ActiveSync." I too found that the serial port changed to ActiveSync. The key, IMHO is to hit that "Refresh" button; i.e. once your device and PC are paired and connected, going to the BT devices and editing (press & hold)the device name (the notebook or PC in this case) you will get the services which will initially say serial port, but when you click refresh, it will change to AS.
jj activesync via microsoft bluetooth stack
both from PC and JJ :
delete eventually existing pair between them;
from PC:
if there isn't create a local service COM port. I created COM8 not protected, automatic start;
from PC activesync:
remove flag both for USB and other connections;
from JJ activesync:
try to connect, it ask for pairing, reply yes;
In "mode" flag on turn on bluetooth & make this device visible;
search for new devices, when PC has discovered complete the pairing;
after paired, you can see a serial port and other PC's services;
stay there;
from PC activesync:
now turn flag on other connections setting COM8;
from JJ:
refresh and You can see that serial port begin activesync;
tip OK for close all bluetooth setting windows, You are redirected in activesync.
enjoy start to sync
15hours of crying and knocking the device. i've successfully fixed it...
i did this (credits to google)..
Delete all paired bluetooth devices from PC and from MOBILE.
CAUTION - USE IT AT YOUR OWN RISK <--- I used a registry editor for the mobile phone (google for regeditSTG2) and opened the Branch "HKLM\SOFTWARE\Microsoft\Bluetooth\ActiveSync" There might be a Key with a hex-String like this "0016cxxxxxx" --> delete it. Change the View to display the values in this Registry Branch, then delete the "LastConnected" Value and set the "Initialized" value to "0"
Turn bluetooth OFF>ON
Pair from PC
Confirm on DEVICE (dont need to select anything just enter code and press OK)
Go START->Active Sync->Connect via Bluetooth
Click to expand...
Click to collapse
Voilla worked for me..
hope this helps someone else
I've managed through pain and misery to get Activesync to work through bluetooth (not easy with widcomm stacks as drivers).
When my PC boots up, Activesync (PC) will complain that the bluetooth COM port isn't connected (obviously because my phone isn't connected through bluetooth 24/7)
So everytime I reboot my PC, I have to re-check the COM port connection in the connection options (PC) to make Activesync listen to my bluetooth COM.
Any suggestions?
Also, I know that when my phone is connected via USB, my phone will gain access to the internet (My PC has the internet connection and shares it to the phone). With bluetooth I havent been able to get this to work. Yet both USB & bluetooth work through Activesync. Is there something Im missing?
Thnx! I hope this isn't too specific/complicated like question
I used to have some of the same problems. What I found that usually it was 2 things causing it.
1. Activesync - Installation or Configuration
2. BT Software - Installation, Configuration or Need BT Software upgrade
What fixed my issue was 2 fold: activesync settings & needed to upgrade my dongle's software.
Activesync: When I installed 4.5 it setup a network connection that kept running in. And when I started up my PC I could see the icon running in my sys-tray (and would have troubles on and off again either with bluetooth / USB sync. What I found that worked for activesync was uninstall and make sure you check off allow wireless activesync connection. I've also found it likes to use com 3 for BT activesync.
BT Dongle: I have Motorola PC850 dongle and found that there was a great new BT Stack update that would hold the settings even if I turned my PC off for weeks at a time or removed the dongle to somewhere else. Plus it fixed the issue I had with using my BT stereo headset, to listen to music with out pops and skips. Oh In your BT settings make sure that com 3 or what ever your using is the same as activesync
Hope I can test those few tweaks.
However, after connecting my phone to activesync by USB, now my phone won't even connect by bluetooth to my PC anymore.
STUPID STUPID bluetooth stacks