Related
Dear all, is that possible to activesync mini and pc without USB? Whenever using usb to sync, mini will be charged. Can i prevent this auto charging problem coz lets say the battery in my mini is always full, will it do any harm when it keep charging whenever we activesync? If we can activesync using BT, what is the procedure?
Just go to bluetooth settings and do activesync setup. you will need to re pair your PC. works really well.
rmg, what do u mean by repair the pc, can u provide me with more details and step on doing this, appreciate your help thanks
rmg, i did what u told me, but when i click start button on the "bluetooth activesync setup:" the message box come out "please start bounding with other bluetooth device which support serial port or activesync profile as your activesync partner". i cannot get it done, can u help
how i do is it
1) bond PC and Phone in Bluetooth Settings in windows
2) on phone go to Activesync - tools - Options - Options - Dropdown box
Eather Bluetooth or 19200 default
3)Open active sync pc
4) Active Sync on Phone - Tools - Connect Via Bluetooth
and that is how i connect
In the advanced settings for your BT dongle you will need to check what Bluetooth Serial port number is being used. I found mine under local services. Once you have that go into the proerties for AS and where it lists the serial port to use put the COM Port number of your BT Serial port in that box. Now when you hit the AS button they should be able to connect with each other. Hope that helps.
One of the requirements is for you to have a ActiveSync 3.8.
Once you have that installed a new port will also be installed with the Windows BT stack. When the BT stack is detected a new port will also be available.
Now the next step is to go to the PPC. Hit Start go to Settings, System and then Blue Tooth Settings. Hit the Start button and it should bring you to the BT activation where you turn it on. Have everything checked. Once this is done, start pairing the laptop by having it detect the PPC and set a passkey for protection. Once they are paired, launch ActiveSync in the PC and go to File and Connection Settings. Once in this screen pit a check mark on the Allow Serial... Set it to the new port set by your BT Stack.
Once this is done, on the PPC, hit Start and go to Programs select ActiveSync. Hit Tools and then Connect via Bluetooth. This should then start working.
One bug I did find is that once you connect your device to your charger and initialize the ActiveSync over BT everything will work well. BUt once you remove it from the power conenction, your device will soft reset.
ok i will try, thanks to all of you
Stupid Q. If you're using BT for Activesync, the PC will still act like a pass-thru internet gateway, right? And you can now surf the net via BT (the same way you do it with wifi)?
Thanks.
@MC_Oliver
The answer is yes. If you are doing ActiveSync over Bluetooth it is the same as ActiveSync with a cable. You should have the same icon on the top of your screen. You can even browsse the files in your PPC.
Thanks dre.
Btw, curious if you have the same problem as I do in this thread? Thanks again.
mc_oliver said:
Stupid Q. If you're using BT for Activesync, the PC will still act like a pass-thru internet gateway, right? And you can now surf the net via BT (the same way you do it with wifi)?
Thanks.
Click to expand...
Click to collapse
Is my question stupid? sorry about that coz i am new
mouse said:
Is my question stupid? sorry about that coz i am new
Click to expand...
Click to collapse
No, not at all. I cut my sentence short and it should have read; I have a stupid question. Sorry for the misunderstanding.
Trying to BT AS from my JasJar to my PC.
PC has activesync service setup on COM6
AS is listening on COM6
JasJar has outgoing COM set to 4
When I start a BT sync reports "Cant find existing Bluetooth Partnership that supports activesync." and asks for a search.
Run through the wizard and select my PC and its serial port. After finishing device will not start a connection.
Go back to activesync and try to connect via bluetooth and gives the "cant find partnership error.
Tried two different adapters on the PC and neither get it to work.
Anyone with any ideas?
Thanks!
Remove all the BT setting you have setup. Just follow the Help file on AS4.1 it works, really!
Tried all that and still not working.
Device just doesnt seem to initiate an outgoing connection.
ActSync connection problem!!
Did you fix the connection problem, think we are living the same case.
If you did fix would you please tell me what was the way?
thanks!
@Dave
From the PC AS, select File>Connection Settings and uncheck USB connection and select the BT COM port for Allow Connections. Then select "Connect" and wait till it tries all the connections and fails. Then selec Cancel and then try to connect from your Universal.
PS - I am assuming you have set-up the BT pairing using the Control Panel on the PC and Added the BT COM port from there as well
Hi,
Tried your suggestion. No luck.
PC is setup correctly. AS listening on COM6 (BT AS port as shown in my local services)
Jas doesnt seem top even initiate an outgoing connection. Get no blue indication on my desktop icon or on the port status item in the control panel.
Sorry to keep asking questions, but when you set-up the pairing between the PC and JJ did you get a Wizard on the PC that identified the ActiveSync service? Does the pairing info on the JJ say the PC provides a ActiveSync service?
I've had the same problem with my M5000, just solved it.
I removed the Toshiba bluetooth Drivers from the system and rebooted. WinXP SP2 found new hardware and proceeded to install what I assume to be standard MS Bluetooth stack. (DellHardWare.jpg)
Next, I deleted the bluetooth partnership from the M5000. I created a new partnership with my laptop, but initiated from the M5000. At this point, the M5000 didn't offer any services to use with the partnership. So, back to the laptop, creating a new incoming COM port (COM8),(DellCom8.jpg) and then set Activesync on the laptop to use that newly created port. (DellAS_connect.jpg)
Back to the M5000 bluetooth partnership, select the newly created partnership and click refresh (M5000btooth.jpg) This Time it offers me the activesync service. Tick the activesync service and then save.
Finally, on the M5000, from activesync select bluetooth connection...and that was it. Still working. Once I've disconnected and soft reset I'll try to make the connection again and report back. I'll also try to use the M5000 as a wireless modem and post results here.
FrankyG, great news. But I think the procedure you described is not that different from the AS44.1 Help file I suggested earlier.
i do it, but i doesn´t runs
Delete all your BT COM in control panel/system/device manager (select view and show hidden devices) by going to safe mode. Afterwhich restart your PC and try to pair again....it's always works for me
Hi all,
I have a toshiba portege r200 and I'm simply not able to set up ActiveSync to work through bluetooth. The darn computer only sees my phone as a modem.
I have no clue how to do this.
I really cant' see why this has to be so hard. Both units are running stupid microsoft software. Whey the can't microsoft think that people migh want to connect their ppc's to their laptops via bt and just make it work easily?
Please, someone help.
thanks
zsizsi said:
Hi all,
I have a toshiba portege r200 and I'm simply not able to set up ActiveSync to work through bluetooth. The darn computer only sees my phone as a modem.
I have no clue how to do this.
I really cant' see why this has to be so hard. Both units are running stupid microsoft software. Whey the can't microsoft think that people migh want to connect their ppc's to their laptops via bt and just make it work easily?
Please, someone help.
thanks
Click to expand...
Click to collapse
I agree 100% that this should be easier. But I think ActiveSync is actually a service that the laptop offers, not the phone. So on the phone, go to your BT manager, select your laptop, and then select services. ActiveSync should be one of the choices. After that, you should be able to connect to ActiveSync via BT, but I think you need to initiate the connection from your phone.
Activesync via Bluetooth
1. Install Active sync
2. Connect phone to USB cable and computer and let active Sync run once.
3. Disconnect USB cable.
4. On your Computers Bluetooth software (add a com port) before you detect the phone (very important).
5. On Active Sync on Computer click "connection Settings" and make sure it is using your com port from step 4.
6. Turn on discovery on your computer.
7. On your Phone go to Bluetooth / devices / New and select your computer enter pin on phone and PC.
8. Go to Active Sync on your phone and click "Connect via Bluetooth."
Hope this helps.
thank you all for your input.
i tried everything you guys suggested and it's still not working. my comp only offers a serial connection. is that ok? it has this toshiba bluetooth software on it not the original windows kind.
when i choose connect via bluetooth on my ppc's activesync it sais there's no computer that supports bt.
any ideas?
thanks again
I have Toshiba Bluetooth control software as well. I am certain it's the incorrect or incomplete BT COM port setting on your PC. A few findings (on my notebook) to share, hope this helps.
1. I have a "Bluetooth Local COM" applet on Control Panel
2. By opening "Bluetooth Local COM" applet I have a list of PORTS
3. The CORRECT port I HAVE TO use IS
"COM7 Toshiba BT Port (COM7) LocalCOM-Server[SerialPort(TOSHIBA LOcalCOM)]
NOT
"COM6 Toshiba BT Port (COM6) LocalCOM-Client"
4. If you don't find the Server COM port, do "create a Bluetooth virtual COM port for a Server"
5. Of course enable by checking the "Connection Settings" "allows connections to one of the following COM#" (7 in my case)
After this, try the steps I suggested. Initiate BT Activesyn from your PDA phone.
Good luck.
Hi,
Thanks for all your effort.
I did what you said and it's still not working.
When I'm trying to connect from my phone via bluetooth it satill sais it cannot find existing blueooth partnership with a pc that supports activesync.
what am i doing wrong?
Thanks
IceGoal said:
I have Toshiba Bluetooth control software as well. I am certain it's the incorrect or incomplete BT COM port setting on your PC. A few findings (on my notebook) to share, hope this helps.
1. I have a "Bluetooth Local COM" applet on Control Panel
2. By opening "Bluetooth Local COM" applet I have a list of PORTS
3. The CORRECT port I HAVE TO use IS
"COM7 Toshiba BT Port (COM7) LocalCOM-Server[SerialPort(TOSHIBA LOcalCOM)]
NOT
"COM6 Toshiba BT Port (COM6) LocalCOM-Client"
4. If you don't find the Server COM port, do "create a Bluetooth virtual COM port for a Server"
5. Of course enable by checking the "Connection Settings" "allows connections to one of the following COM#" (7 in my case)
After this, try the steps I suggested. Initiate BT Activesyn from your PDA phone.
Good luck.
Click to expand...
Click to collapse
Phat!! This works for me with my Acer laptop and Bluetooth connection, thanks man!
Sweet, took a few tries, but works like a charm.
Thanks
Bump
I just wanted to bump this to say thanks for posting the bit about using the LocalCOM-Server[SerialPort(TOSHIBA LOcalCOM)] port instead of the client port. Trying to get AS working using the Toshiba stack was driving me around the bend!
My pleasure
I've learned a lot from this wonderful board from a lot of wonderful people. Glad to be part of it!
You're the MAN
Thanks. This also worked for my Cingualr 8125. Many hours wasted. Glad I found this post. Thanks for your help.
this worked on my cingular 8125 as well, zsizsi i think you may have to delete all partnerships that were previously created with handheld on your pc and handheld. if that dosent work then in bluetooth settings go to options and under general tab check box "PAN networking service" that is just something i did while creating partnership not sure if it helps
The only thing that worked for me after 4 days of messing with it was to do a cold boot.
The first thing I did after the boot was to follow the instructions. Voila! ActiveSync magically appeared.
Hi all,
I have exactly the same problem with my qtek9100 and my IBM T43 Laptop.
I tried many times but....still not working!
As zsizsi if I try to make a relationship via PDA, it asks me the pairing key, and I'm blocked.
If I go through PC, I can do pairing, in the services I flag activesync, I configure the same com port that I have on AS (com 8) and when I0'm in the bluetooth wizard on the PDA, related to the PC I can only see 3 services:
hands free
remote connection
serial port
no activesync service to flag.
If I try then with the PDA Menu>BT connection it aswer that there is no relationship with PC supporting AS!!!!What the hell!
The only thing I see is that in my BT config in the local server the BT wizard creates a serial port named My activesync......
I have tried also your suggestion but.....
tinman44 said:
this worked on my cingular 8125 as well, zsizsi i think you may have to delete all partnerships that were previously created with handheld on your pc and handheld. if that dosent work then in bluetooth settings go to options and under general tab check box "PAN networking service" that is just something i did while creating partnership not sure if it helps
Click to expand...
Click to collapse
thank you soo much for that info...enabling the "PAN networking service" finally allowed me to connect with my toshiba qosmio laptop
If the devices are paired... You have to select a service for the pda BT connection
Only when you manage to select the servive Activesync (a comport has to be valid assingd) then a connectin can be astablished.
In active sync you must assign a com port.
See the manual in activesync BT
Yes, I can guess it.
The rpoblem is that the devices are paired, the activesync service is flagged in the PC (while I do the automatic pairing devices withn a wizard).
But I can't still see the service in my PDA.
I can only find:
Hands free
Serial port
remote connection
No activesync service on the PDA relation wizard...
Any other suggestion?
Another issue.
When I look in my BT services, I can't find an activesync service, but only an icon (com plug) called My activesync.
Look at the properties of this icon I can only flag automatic/manual and Secure/unsecure connection, and there is the window manu to select the com port (that is the same selected in Activesync settings).
Is that correct, or I should find a specific activesync icon (like PIM syncronizing ....)
Blinks....
SKID
Re: Activesync via Bluetooth
IceGoal said:
1. Install Active sync
2. Connect phone to USB cable and computer and let active Sync run once.
3. Disconnect USB cable.
4. On your Computers Bluetooth software (add a com port) before you detect the phone (very important).
5. On Active Sync on Computer click "connection Settings" and make sure it is using your com port from step 4.
6. Turn on discovery on your computer.
7. On your Phone go to Bluetooth / devices / New and select your computer enter pin on phone and PC.
8. Go to Active Sync on your phone and click "Connect via Bluetooth."
Hope this helps.
Click to expand...
Click to collapse
FOLLOW THIS STEP BY STEP.... I HAVE DONE IT 3 TIMES FOR MYSELF AND FRIENDS ON DIFFERENT LAPTOPS AND IT WORKED FIRST TIME - EVERYTIME!!!
PS. Delete all existing pairings, relationships, COM ports etc, START FRESH!
THANKS MAN!
Re: Activesync via Bluetooth
IceGoal said:
1. Install Active sync
2. Connect phone to USB cable and computer and let active Sync run once.
3. Disconnect USB cable.
4. On your Computers Bluetooth software (add a com port) before you detect the phone (very important).
5. On Active Sync on Computer click "connection Settings" and make sure it is using your com port from step 4.
6. Turn on discovery on your computer.
7. On your Phone go to Bluetooth / devices / New and select your computer enter pin on phone and PC.
8. Go to Active Sync on your phone and click "Connect via Bluetooth."
Hope this helps.
Click to expand...
Click to collapse
Thanks IceGoal, on my HP laptop it works superb.
But I have to say that those people that work on our mobile network provider company are uncapale, because they said that this is impossible to connect.
Thanks again folks.
Hi,
I have already red more forum on this question.
I have e problem trying to connect to ActiveSync by bluetooth .
When I pair my JasJar to PC not appear the service "ActiveSync", but "Serial Port".
Therefore ActiveSync, on JJ, can't connect to my PC.
I have already configure ActiveSync on PC to connect on right Com port.
Please help me, i have lost some night to try it.
had same problem,you have to get rid of all phantom bt ports there is some stuff on windows support
Thanks for reply,
How can I remove phantom bt port?
Pozzame said:
Hi,
I have already red more forum on this question.
I have e problem trying to connect to ActiveSync by bluetooth .
When I pair my JasJar to PC not appear the service "ActiveSync", but "Serial Port".
Therefore ActiveSync, on JJ, can't connect to my PC.
I have already configure ActiveSync on PC to connect on right Com port.
Please help me, i have lost some night to try it.
Click to expand...
Click to collapse
Please, can someone help me?
On my computer and Universal, I find it easy to setup BT Active Sync if I activate the setup on the Universal first using active sync app. There is an option within the active sync app to sync via BT. The computer will then recognize the device and will ask you if you want to pair it. On the other hand, if I try to pair them beginning with my computer to search for the Universal, after pairing and ticking all necessary boxes, it still won't sync.
After pairing and ticking all necessary boxes. Make sure you reset BOTH your computer and the Universal.
The problem is that when I pair my Universal to PC, not appear the service "ActiveSync", but "Serial Port".
I've already tried to delete everything and reinstall bluetooth pen, with his drivers and with windows drivers, and ActiveSync too.
I've also deleted all pairs and all port on Universal.
But I've not obtained any result.
I don't know what to make.
Can someone help me?
Please.
Nobody has had my same problem?
Any idea, please?
I had the same problem until I upgraded from Toshiba BT stack to Wildcomm BT Drivers stack (4.0.1.700).
Things I have learned:
- If UNI is connected via USB then AS service will not show in device pairing on PPC.
- You need to create an incoming COM port on PC and set AS to allow connections to this port.
raad said:
I had the same problem until I upgraded from Toshiba BT stack to Wildcomm BT Drivers stack (4.0.1.700).
Click to expand...
Click to collapse
I haven't change the bletooth stack.
Until some week it makes worked regularly, but an evening, I was configuring my Laptop to use the JJ like BT modem, when the AciveSync service has begun not to recognize more like such, but like “Serial Port”.
I've already tried to delete everything and reinstall bluetooth pen, with his drivers and with windows drivers, and ActiveSync too.
I've also deleted all pairs and all port on Universal.
But I've not obtained any result.
Yesterday, I have tried the synchronization with an other PC with a fresh installation of windows, but the result has been the same one.
Therefore the problem is on JJ, even in the registry.
I don't know what to make.
Please, can someone help me?
Up
Please help me...
Don't know if this will help and I claim no credit because this solution was written in some other threads. For the universal with a Toshiba bluetooth on your PC:
first, pair your Universal with your PC, you get "serial"
On your PC, create the following "bluetooth local com" (Control panel)
- COM7 Toshiba BT Port (COM7) LocalCOM-Server[SerialPort(TOSHIBA LOcalCOM)]
- COM6 Toshiba BT Port (COM6) LocalCOM-Client
In your activesync, allow connection to COM7
Now comes the fun part. On your universal, go to your bluetooth settings, devices, edit your device and press "Refresh", possibly more than once. Serial Port will change to ActiveSync.
It worked for me.
Eric
Also got to the control panel on PC and delete the bluetooth modem that was created. When u add a new incoming port on PC make sure it's not COM8 because that is used by JJ for USB modem connections.
same on treo 750v
I have the exact same problem on my Palm treo 750v. Searched the whole internet for a solution and found some other people with the same problem but no resolution. The only recommendation that seems to work is to do a hard-reset.
The problem started on my device after I played around with the Soft GPS port. It seems that it screwed up some COM port references for good...
I had the same problem on my notebook with Toshiba's BT drivers. I uninstalled them and connected an external USB BT which fired up the MS default BT stack.
After I completed the pairing using Bluetooth Devices (in control panel) and clicking Add in the devices tab, I used the COM Ports tab and added an incoming port and copied the number of this com port in the AS connection settings.
Now, I initiated the AS over BT from the Jasjar and it said something like "it cannot find the service or whatever and would you like to create one". I clicked yes, when it took me to the list of paired devices. From here I did what leblan has also noted "your device and press "Refresh", possibly more than once. Serial Port will change to ActiveSync." I too found that the serial port changed to ActiveSync. The key, IMHO is to hit that "Refresh" button; i.e. once your device and PC are paired and connected, going to the BT devices and editing (press & hold)the device name (the notebook or PC in this case) you will get the services which will initially say serial port, but when you click refresh, it will change to AS.
jj activesync via microsoft bluetooth stack
both from PC and JJ :
delete eventually existing pair between them;
from PC:
if there isn't create a local service COM port. I created COM8 not protected, automatic start;
from PC activesync:
remove flag both for USB and other connections;
from JJ activesync:
try to connect, it ask for pairing, reply yes;
In "mode" flag on turn on bluetooth & make this device visible;
search for new devices, when PC has discovered complete the pairing;
after paired, you can see a serial port and other PC's services;
stay there;
from PC activesync:
now turn flag on other connections setting COM8;
from JJ:
refresh and You can see that serial port begin activesync;
tip OK for close all bluetooth setting windows, You are redirected in activesync.
enjoy start to sync
15hours of crying and knocking the device. i've successfully fixed it...
i did this (credits to google)..
Delete all paired bluetooth devices from PC and from MOBILE.
CAUTION - USE IT AT YOUR OWN RISK <--- I used a registry editor for the mobile phone (google for regeditSTG2) and opened the Branch "HKLM\SOFTWARE\Microsoft\Bluetooth\ActiveSync" There might be a Key with a hex-String like this "0016cxxxxxx" --> delete it. Change the View to display the values in this Registry Branch, then delete the "LastConnected" Value and set the "Initialized" value to "0"
Turn bluetooth OFF>ON
Pair from PC
Confirm on DEVICE (dont need to select anything just enter code and press OK)
Go START->Active Sync->Connect via Bluetooth
Click to expand...
Click to collapse
Voilla worked for me..
hope this helps someone else
For some reason I can not get Active Sync to work using bluetooth. It used to work before I installed Touch-It 4.4; but I don't think this has anything to do with it.
Paired my device with my laptop. Enable the Activesync BT protocol, set the com port to COM6. Opened Activesync on my laptop, allowed connection via COM 6. Started Activesync on my device and tapped "Connect via Bluetooth" and it asks me to pair a device because he can not find a device with ActiveSync enabled. Tapping my laptop does not sort any effect.
Anyone experience with this, help would be greatly appriciated!
I have the same problem. I read that that the AS BT link has to be first (before adding headphone, gps, etc.) but after deleting all of my connections and re-trying, it still doesn't work. In addition, when I first tried it, none of my other connections would work anymore.... and still don't consistently. I couldn't find a resolution after extensive googling either...
bump - It's been a whil