Database Users

BT Activesync "No Partnership"

Trying to BT AS from my JasJar to my PC.
PC has activesync service setup on COM6
AS is listening on COM6
JasJar has outgoing COM set to 4
When I start a BT sync reports "Cant find existing Bluetooth Partnership that supports activesync." and asks for a search.
Run through the wizard and select my PC and its serial port. After finishing device will not start a connection.
Go back to activesync and try to connect via bluetooth and gives the "cant find partnership error.
Tried two different adapters on the PC and neither get it to work.
Anyone with any ideas?
Thanks!

Remove all the BT setting you have setup. Just follow the Help file on AS4.1 it works, really!

Tried all that and still not working.
Device just doesnt seem to initiate an outgoing connection.

ActSync connection problem!!
Did you fix the connection problem, think we are living the same case.
If you did fix would you please tell me what was the way?
thanks!

@Dave
From the PC AS, select File>Connection Settings and uncheck USB connection and select the BT COM port for Allow Connections. Then select "Connect" and wait till it tries all the connections and fails. Then selec Cancel and then try to connect from your Universal.
PS - I am assuming you have set-up the BT pairing using the Control Panel on the PC and Added the BT COM port from there as well

Hi,
Tried your suggestion. No luck.
PC is setup correctly. AS listening on COM6 (BT AS port as shown in my local services)
Jas doesnt seem top even initiate an outgoing connection. Get no blue indication on my desktop icon or on the port status item in the control panel.

Sorry to keep asking questions, but when you set-up the pairing between the PC and JJ did you get a Wizard on the PC that identified the ActiveSync service? Does the pairing info on the JJ say the PC provides a ActiveSync service?

I've had the same problem with my M5000, just solved it.
I removed the Toshiba bluetooth Drivers from the system and rebooted. WinXP SP2 found new hardware and proceeded to install what I assume to be standard MS Bluetooth stack. (DellHardWare.jpg)
Next, I deleted the bluetooth partnership from the M5000. I created a new partnership with my laptop, but initiated from the M5000. At this point, the M5000 didn't offer any services to use with the partnership. So, back to the laptop, creating a new incoming COM port (COM8),(DellCom8.jpg) and then set Activesync on the laptop to use that newly created port. (DellAS_connect.jpg)
Back to the M5000 bluetooth partnership, select the newly created partnership and click refresh (M5000btooth.jpg) This Time it offers me the activesync service. Tick the activesync service and then save.
Finally, on the M5000, from activesync select bluetooth connection...and that was it. Still working. Once I've disconnected and soft reset I'll try to make the connection again and report back. I'll also try to use the M5000 as a wireless modem and post results here.

FrankyG, great news. But I think the procedure you described is not that different from the AS44.1 Help file I suggested earlier.

i do it, but i doesn´t runs

Delete all your BT COM in control panel/system/device manager (select view and show hidden devices) by going to safe mode. Afterwhich restart your PC and try to pair again....it's always works for me

Internet over BT @ laptop

Does anyone know how to connect my laptop to internet by Bluetooth at MDA Compact ? I had Bluesoleil drivers at laptop, and MDA.
"Wireless Modem" doesn't works at Bluesoleil drivers.

I'm using MDA Compact 2 (WM5), which I think ought to be the same. You don't need fancy stuff to have it connected. I did it before, and I have some instructions somewhere in this forum.
Anyway, when sync-ing your device (whatever method), try accessing internet on your device. If that is ok, you just need to use your bluetooth to sync your device to have internet connetion. Its an easy job.

It doesn't work. When I sync, my MDA try to access to Internet via laptop.
I need connect my laptop via MDA (GPRS), not MDA via laptop.

If U do a search on this forum, U should be able to find ActiveSync over BT discussion (for me, I use the stock BT driver.) After activesync, U got internet aceess thru activesync.

activesync over bluetooth

will someone please help me in configuring active sync over bluetooth..
i want to connect my jasjar with my pc over bluetooth.
when i search in the bluetooth of my jasjar the computer is shown in the devices but in the service there is no activesync

Hi I was puzzled with this the other day. I found that if you open ActiveSync and click Menu then Connect via Bluetooth. It worked fine then.
Hope this helps
B

Before you can connect, you need to make sure your PC has a bluetooth com port. Then in ActiveSync, enable connection via that com port.
Once that's done, you can use the connect via bluetooth on activesync on your ppc, and you can choose your pc.

Bluetooth GPRS internet sharing from Hermes to PC

The Hermes doesn't support PAN due to its wretched MS BT stack, so how can I share my gprs connection through bluetooth? If impossible, how to share it through usb?
Best regards Johan

Hi, theres an app called PDANet, I use it to connect via usb, but it also is supposed to work over bluetooth and even bluetooth to a mac and share the connection, also you don't have to disable active sync if you use usb to connect to a windows machine

Just create a connexion using bluetooth modem and dialing *99#

Using a modem connection I only get a 633 error, cannot open com port, in windows the modem is set to use COM4, but I only have a incoming com at port 9. I don't know how to fix this, will try pdanet.

I use a widcomm stack on my HP laptop and it works flawlessly; I just had to pair with my tytn and the software automaticely created a generic bluetooth connexion and a generic bluetooth driver. There is only a little trick there; if I start the connexion through windows it won't work; I have to fire it from my bluetooth manager, which realy connect through my phone.

connecting 2020 via bluetooth in activesync

i'm using ivt corporate bluesoleil and qtek 2020 wm5
can't connect via bluetooth
neeeeeeed help plz

http://www.geekzone.co.nz/content.asp?contentid=2417

i said ivt corporate bluesoleil
plz post specific directions

dont know the software you can try to look at the other guides for bluetooth they got on their site
or try the general thing with making a virtuel bluetooth comport and use that for activesync
or try to update the bluetooth software on the pc

...
Hi,
got the same problem with that ugly bluesoleil bluetooth stack; cause I'm running WM6 I had the choice of Com0-Com9, but that bluesoleil stack only delivers com-ports starting from Com11. The Windows Bluetooth stack wasn't available.
Workarounds didn't work. At last I got two correspondending COM Ports but the Connection with Activesync was disabled after a short while.
So I will buy another Bluetooth stick which uses Windows or Widcomm Bluetooth Stack.
So long
HonkBB

I succed to connect via bluetooth with WM6. I use windcomm bluetooth donggle in my PC. When I install the driver,which came with the donggle, the problem begin. I cannot connect my Hima to the PC. Then I delete the driver from windcomm and use only the driver from windows XP sp2.
1. Turn on the bluetooh from your PDA so that your pc can recognize your hima
2. explore your bluetooth connection on your pc, make your incoming port, and remember the port which automatically provide by the pc.
3. Open your active sync from your pc, open the connectio setting. Checkbox the "allow connections to one of the following" anda chose the port that you have just made in steps 2. And press ok
4. Open active sync, and from menu press connect via bluetooth. If your device haven't paired yet, then the next step to make pairing as usual
5. After you finish pairing step, you are ready to sync via bluetooth