Qtek 2020 (communication device) - Networking

Hi,
I can't connect to the internet through my Qtek (via bluetooth)! Probably i do not have proper drivers for Mac OS X Panther (10.3.7). Help!
Computer discovered my Pocket PC and Pocket see my PowerBook by bluetooth, but "Could not open the communication device."
Earlyer I used mobile phone Nokia 6310i and everything work correctly.
Pleas help!
Best Regards and Thank You
Gene
p.s.
my computer info:
Machine Model: PowerBook G4 17"
CPU Type: PowerPC G4 (3.3)
Number Of CPUs: 1
CPU Speed: 1 GHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 1 MB
Memory: 1 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.6.2f1

on the pc you default can only do it while being connected to activesync
and let that handle it
i mean by default that the ms bluetooth stack on the xdaII dont support the PAN profile
you can solve it by using the vidcomm bluetooth stack you can find it if you do a search in the forum for vidcomm

THX
I try...
download
http://www.bluwireless.com/Widcomm14210.zip
...but I don't know it is right sollution for my problem. :roll:

Am I right. I have Macintosh only. :?
What shall I do with this software?

well if there is a cab file in the zip then you should install the cab file on your xda

eeeh
ok I try
I have only one file with cab extension "Data1.cab"
gl hf :?

NOT WORKING!!!
I surrender

when cab files are clicked on
on the xda then they autoinstall

Related

Wm2005 : Activesync 4.0 not connecting through usb

Rom Version : 1.50f.blWWE
Is the rom correct?
Also ActiveSync 4.0 - MS Release does not allow the XDA to connect it detects it as Generic RNDIS (Prototype - Remember to Change IDVendor)
I did try to patch the nbf before flashing but the msg was cannot patch.
Please adivce as sync with IR is to slow
Storage 62 Mb
Program 56.34
Nand Disk 14.54
Any Suggestions ??
Thanks

BLUETOOTH PROBLEMS !(for TomTom GPS receiver) HELP ME please

hi guys i'm a newby (this forum is great!)
i'm from Italy
i've a problem for my S100-Jam-Magician smartphone.
The Bluetooth doesn't work...
i tried before to connect a my friend's phone via bluetooth, the magician recognize the phone (i can read the name of the phone in the bluetooth settings) but the communication doesn't work.
i cant't upgrade the phone on clubuimate, (i don't have the time to explain) so i'm here.
now i've bought this GPS receiver (Sirf STAR III) http://www.handnav.co.uk/product_details.php?id=228
and i've installed the tomtom navigator 5 software (it works) with italian Map.
as for the phone The Magician relevate the name of the receiver, but it doesn't work, there are problems and the bluetooth connection go down automatically. (i've tried normal ways e all normal settings combination - port 4 , 5 , but nothing-9
Appears continuosly the message
"Desligue o modo de voo em primeiro lugar!"
i think it's spanish or portoguese, but i don't undestand why, because i have the italian rom. U(maybe because i had installed before another version of tomtom navigator with portoguese map?)
i've read other post about bluetooth but the tools doesnìt work and i haven't founded the .cab file that maybe solve bluetooth problems.
Can you help me ?
i'm in troubles !
SOLUTIONS :
1) some patch to install that resolve bluetooth problems
it should better because the phone works good...
2) upgrade magician ROM
i don't know which is my rom version
during the magician rebooting appear
R 1.05.00 G 1337.39 D 1.06.04 ita
however i think it is old...
with an official (on clubimate) newer version are there bletooth improvings ?
IMPORTANT
a - i'd like a working italian version
b - i have seen the upgrading post for magician and i HAVE NOT UNDERSTOOD ANITHING...because i'm not a tecnich or expert...only a normal user ... forgive me
there is a easier and more detailed tutorial?
is there some italian user that can help me?
my msn accont is [email protected]
thankyou
The ?best? bt patch can be found here: O2 MINI NEW BLUETOOTH STOCK.
http://forum.xda-developers.com/viewtopic.php?t=33532&highlight=magician+stock+bt
Login to be able to download.
Find yourself a rom on the ftp, either shipped-rom (.exe) or image file (.nb1) and give me signal what you've chosen. I'll send you the instructions for the necessary steps.
Cheers, M
Hello!
Before upgrading your Magician, You should test your bt GPS connection with an other little GPS software like cemonitor ( download link--> http://www.gpspassion.com/fr/download.asp?dl=1 )
Try to find your BT GPS com Port normally is com 5. If not I give you a little soft that map the com5 automatically at start. It is "tomtom5patch.exe" that must be on your "\windows\Startup\" folder.
SoftReset your Magician after this install.
In CEmonitor, set the com 5 and look if your GPS communicate.
I forgot to tell you to set the BT GPS on the windows settings, with the correct password. You probably made it before.
Try it and ask again...
nothing to do
the first patch is good but doesn't resolve my problem
that damned write in spanish continues to appaer when i try to make bluetooth work and bluetooth shut down.
the second patch doesn't work, when
i think i have installed a wrong or damnaged software on the PDA in the past that has ruined something...
THANK YOU for the helping,
now i'll try to install a new rom with your help.
have you got any suggestion for the rom to install?
do they work all fine, even in italy? wìhich is the best one in your opinion?
is there the risk to damnage the magician?
There's a 1.12ITA shipped-rom on the ftp under magacian. This is the safest upgrade.
- make a backup of every piece of data you want to keep, especially contacts, calendar, tasks. Everything will be lost & programs need to be reibstalled
- synchronize with outlook via Act.Sync
- Download the ITA1.12 shipped-rom
- execute the downloaded file
- follow instructions on your PC & watch the progress on the magician as well
- when finished, you'll be asked to hard-reset
- hard-reset & enjoy the upgraded magician
- synchronize the outlook data
- reinstall your programs
That's it.
Regards, M
it seems simple...
now i try
grazie !!
thank you all
now al things work perfectly.
You're welcome.
Hi,that message(desligue o modo de....)compare from a few time on my magician.The rom is the same from 8 month,and the messagge compare from 1 month.The only things that I change are the 2 giga sandisk,and I installed 3 different navigator on my device.I don't think the problem comes from rom(1.12 ita),maybe from sd or other navigator?

IDA ARM debuger

Hello!
I try to debug some program on Qtek 8310 with IDA 4.9 Adv+IDA ARM debuger plugin from IDA 5.
My device is sofware unlocked:
1)HKLM\Security\Policies\Policies\00001001 = 2 => 1
2)SDA_Unlock.exe
3)HKLM\init\BootVars\RequireCertMod = 1 => 0
4)HKLM\Security\Policies\Policies\00001005 = 16 => 40 (RAPI)
5)HKLM\Security\Policies\Policies\00001017 = 16 => ??? (CERT)
When I start debuging in IDA, plugin being to run om smartphone, activesync conection go down and ida show message - irs_recv:An existing connection was forcibly closed by the remote host
What I do worth?
Same problem. May be ActiveSync problem? I am using 4.1
BTW, there is already post with same problem: http://forum.xda-developers.com/viewtopic.php?t=48886
I've enabled RAPI, full unlocked - by ActiveSync still crashing (AppName: wcesmgr.exe AppVer: 4.1.4841.0 ModName: wcesmgr.exe
ModVer: 4.1.4841.0 Offset: 00023ed6)
Olostan said:
Same problem. May be ActiveSync problem? I am using 4.1
Click to expand...
Click to collapse
I have activesync 4.0 4.1 and 4.2 - same problem... In device emulator with WM 5.0 Smartphone QVGA works all rights.
here:
Don't work
EnableRAPI.cab don't work on wm5(qtek8310) with error while install (not for this device). I think it is not support wm5.0.

Frozen screen with Via Michelin 4.4 and BT 77 GPS

Hi everybody
Some posts ago I asked questions to find right parameters to connect with my BT 77 bluetooth GPS.
Using VisualGPSce I finally found COM5/38400 as parameters to connect with. Knowing that, I used Via Michelin 4.4 with those parameters and wait ...
Some minutes later I obtained the satellits signals in the GPS test screen of ViaMichelin but after that ViaMichelin got frozen.
I'm near the goal but something is missing.
Thanks for your help.
Appareil QTEK 2020
ROM 1.72.02FRA
RADIO : 1.14.00
PROTOCOLE : 1337.24
EXTROM : 1.72.603
Bluetooth driver Microsoft or Widcomm
I'ts me again
I tried to replace the Microsoft drivers by the Widcomm ones with a .cab found on the net.
1 : Delete of key HKLM\Services\BTIcon to uninstall Microsoft drivers
2 : Install of BluetoothGPS.cab to install Widcomm drivers
It has been great during one hour.
Via Michelin 4.4 was OK with my GPS BT77 on port 7
After that I got "Bttray : "the BT radio failed to turn on due to insufficient driver memory available" and "BTTrayCE BT could not be correctly initialized".
Of course memory is actualy not concerned.
Then it has been impossible to turn bluetooth ON without obtain the message "BTTrayCE BT could not be correctly initialized"
I think the .cab to install Widcomm was not good because during installation I got messages about the fact that e-PocketSetup was not a valid official version.
Is it possible to find a good installation for Widcomm drivers (or others) for Windows CE 2003 ?
The problem is this Microsoft driver for Bluetooth.
How to find another one ?
Thanks

ActiveSync 4.5

I've successfully upgraded my Qtek 9090 to WM6 Pro (5.2.16.20)
-
ROM version: 5.60.00 WWE
ROM date: 03/02/05
Radio version: 1.12.00
Protocol version: 1337.42
All works great, but still I can't connect to ActiveSync 4.5
When I put the Qtek 9090 on cradle it ask to install Activesync 4.5 or newer ... but I've installed (and reinstalled) this tool, downloaded directly from MS site.
I've also Updated all the components on PC (SO, Office, etc ..) with Microsoft Update. But still I've this problem.
Please, could you give me any help ?
Thanks in advance.
Beppe
-
i got the same problem!
my 9090 says:
cannot open the connection usb, this connection is no longer valid ore exist, plz select a diffrent
it worked until now
Sorry, my English is bad. But I try to help because I had the same problem.
Which firewall is installed?
With the change of WM2003 on WM6 new rules must be allocated for ActiveSync.
Several ports (999, 5678 etc.) must be switched free or turn the firewall off for testing!
Simply turning off the network monitor at the Comodo Firewall.
Good luck!
Mathias
My Qtek 9090 ask for Activesync 4.5 or newer while connecting.
I have just tried with another PC with XP on board and a fresh copy of Activesync 4.5 - Same problem (ask for 4.5 or newer)
I'm quite sure the problem is on PDA.
I hope in some suggestion.
Thanks to all.
Beppe
-
do search on the forum.. you'll find what you need..
cheers
evo
check\uncheck in USB to PC - Enable advanced network funkcionality try which one of them will work with your pc
RESOLVED !!! (Yeahhh)
The problem was on network properties of Qtek, when connected.
Right-click (in control-panel/network-connection) the Qtek entry / Then properties
- check only tcp/ip protocol and MS network services
- I've disabled bindings for VPN and packet-trace utility
Activesync 4.5 WORKS GREAT NOW
Have a nice WM6 upgrade.
Beppe
-

Categories

Resources