hi guys i'm a newby (this forum is great!)
i'm from Italy
i've a problem for my S100-Jam-Magician smartphone.
The Bluetooth doesn't work...
i tried before to connect a my friend's phone via bluetooth, the magician recognize the phone (i can read the name of the phone in the bluetooth settings) but the communication doesn't work.
i cant't upgrade the phone on clubuimate, (i don't have the time to explain) so i'm here.
now i've bought this GPS receiver (Sirf STAR III) http://www.handnav.co.uk/product_details.php?id=228
and i've installed the tomtom navigator 5 software (it works) with italian Map.
as for the phone The Magician relevate the name of the receiver, but it doesn't work, there are problems and the bluetooth connection go down automatically. (i've tried normal ways e all normal settings combination - port 4 , 5 , but nothing-9
Appears continuosly the message
"Desligue o modo de voo em primeiro lugar!"
i think it's spanish or portoguese, but i don't undestand why, because i have the italian rom. U(maybe because i had installed before another version of tomtom navigator with portoguese map?)
i've read other post about bluetooth but the tools doesnìt work and i haven't founded the .cab file that maybe solve bluetooth problems.
Can you help me ?
i'm in troubles !
SOLUTIONS :
1) some patch to install that resolve bluetooth problems
it should better because the phone works good...
2) upgrade magician ROM
i don't know which is my rom version
during the magician rebooting appear
R 1.05.00 G 1337.39 D 1.06.04 ita
however i think it is old...
with an official (on clubimate) newer version are there bletooth improvings ?
IMPORTANT
a - i'd like a working italian version
b - i have seen the upgrading post for magician and i HAVE NOT UNDERSTOOD ANITHING...because i'm not a tecnich or expert...only a normal user ... forgive me
there is a easier and more detailed tutorial?
is there some italian user that can help me?
my msn accont is [email protected]
thankyou
The ?best? bt patch can be found here: O2 MINI NEW BLUETOOTH STOCK.
http://forum.xda-developers.com/viewtopic.php?t=33532&highlight=magician+stock+bt
Login to be able to download.
Find yourself a rom on the ftp, either shipped-rom (.exe) or image file (.nb1) and give me signal what you've chosen. I'll send you the instructions for the necessary steps.
Cheers, M
Hello!
Before upgrading your Magician, You should test your bt GPS connection with an other little GPS software like cemonitor ( download link--> http://www.gpspassion.com/fr/download.asp?dl=1 )
Try to find your BT GPS com Port normally is com 5. If not I give you a little soft that map the com5 automatically at start. It is "tomtom5patch.exe" that must be on your "\windows\Startup\" folder.
SoftReset your Magician after this install.
In CEmonitor, set the com 5 and look if your GPS communicate.
I forgot to tell you to set the BT GPS on the windows settings, with the correct password. You probably made it before.
Try it and ask again...
nothing to do
the first patch is good but doesn't resolve my problem
that damned write in spanish continues to appaer when i try to make bluetooth work and bluetooth shut down.
the second patch doesn't work, when
i think i have installed a wrong or damnaged software on the PDA in the past that has ruined something...
THANK YOU for the helping,
now i'll try to install a new rom with your help.
have you got any suggestion for the rom to install?
do they work all fine, even in italy? wìhich is the best one in your opinion?
is there the risk to damnage the magician?
There's a 1.12ITA shipped-rom on the ftp under magacian. This is the safest upgrade.
- make a backup of every piece of data you want to keep, especially contacts, calendar, tasks. Everything will be lost & programs need to be reibstalled
- synchronize with outlook via Act.Sync
- Download the ITA1.12 shipped-rom
- execute the downloaded file
- follow instructions on your PC & watch the progress on the magician as well
- when finished, you'll be asked to hard-reset
- hard-reset & enjoy the upgraded magician
- synchronize the outlook data
- reinstall your programs
That's it.
Regards, M
it seems simple...
now i try
grazie !!
thank you all
now al things work perfectly.
You're welcome.
Hi,that message(desligue o modo de....)compare from a few time on my magician.The rom is the same from 8 month,and the messagge compare from 1 month.The only things that I change are the 2 giga sandisk,and I installed 3 different navigator on my device.I don't think the problem comes from rom(1.12 ita),maybe from sd or other navigator?
Related
Hi all,
I've just recently upgraded to the above ROM- everything else seems to be fine but I've just realised that the 'Settings' for BT are slightly different to my original rom version.
I can pair the JAM fine with the PC but it won't let me connect. As I look at the BT settings, I can see the following tabs: Mode, Devices and COM Ports; it's the COM ports that has changed. It's got New Outgoing Port and New Incoming Port. When i select either of these I can't assign any port number; the drop down list is blank.
P.S. I was able to connect fine via BT using my original ROM v1.00 or something.
Any help appreciated.
Thanks.
hey man
i just posted another querry regarding the card reader ...
hope u read it !!
getting back to yr problem
follow the instructions on this link and yr problem will be solved (HOPEFULLY)
http://howardforums.com/showthread.php?t=544932
I remember reading that link a while ago but I got the BT working without Pocket Tools software...
Anyway, I've tried both versions from the website but after installing either of them, the connect via bluetooth in Tools of ActiveSync is not there; just the IR. As soon as I uninstall the software it's back there.
I thought I had mastered the myth of Jam and Bluetooth- looks like back to square one!
Sorry - I'm just impatient- reinstalled and re-paired a few times and all is fine now.
Thanks for your help.
reinstalled what may i ask? im having this exact problem at the mo
Instructions from the top of my head (excuse any errors)
1) I removed the Pocket Bluetooth tools from remove programs
2) Perform soft reset and remove any existing paired devices
3) Reinstall the Bluetooth Tools (i used the an earlier version)
4) Select ActiveSync check box
5) The device should be paired
6) Go to to ActiveSync on PPC; go to tools and you should see Connect BT with ***
This should work.
OK i have install Pocket Bluetooth Tools Version 1.1.0.0 on my SPV M500, but when i pair a device, the menu just flashes up and then disapears and nothing. If i go in to activeSync i also do not have the option like the website shows
Help is needed or do i need to use another version
Thanks
Brian
You will need to unstall the latest version and install the following version:
BTHTools1012.exe
This one works for me!
Panja said:
You will need to unstall the latest version and install the following version:
BTHTools1012.exe
This one works for me!
Click to expand...
Click to collapse
The latest version gives a lot of stability problems on my MDA Compact. After 2 of 3 on/off-switches of bluetooth I have to reset my MDA. After installing the previous version I have no problem anymore.
By the way: there is a way to use the latest version of Pocket Bluetooth: when you pair your device and get the "flashing" screen from Pocket Bluetooth, go to the Today screen before you finish the pairing!
There you will find the Pocket Bluetooth screen. Select the COM-port and finish. Then go back to the bluetooth manager en finish the pairing.
I hope you understand my explanation. It worked for me.
But as said before: the latest version is not stabile, choose the previous.
thanks for your help, will try that
:lol:
Brian
why should one use Pockte BT tools with Magician?
Thought the BT Stack is good enough these days (well: final Himalaya versions were good enough also)
edsub said:
why should one use Pockte BT tools with Magician?
Thought the BT Stack is good enough these days (well: final Himalaya versions were good enough also)
Click to expand...
Click to collapse
I'm using it because I had problems getting active sync to work.
With BT Tools it works after 10 sec
You can use any task manager like MortButtons to switch to the BTTools before finishing the pairing.
thanks
pietrucci said:
The latest version gives a lot of stability problems on my MDA Compact. After 2 of 3 on/off-switches of bluetooth I have to reset my MDA. After installing the previous version I have no problem anymore.
By the way: there is a way to use the latest version of Pocket Bluetooth: when you pair your device and get the "flashing" screen from Pocket Bluetooth, go to the Today screen before you finish the pairing!
There you will find the Pocket Bluetooth screen. Select the COM-port and finish. Then go back to the bluetooth manager en finish the pairing.
I hope you understand my explanation. It worked for me.
But as said before: the latest version is not stabile, choose the previous.
Click to expand...
Click to collapse
thank you - this has worked for me after hours of research!!
Has anyone managed to install Destinator 3.075 on Jasjar
Yes, try searching and you'll find your answers!
1. Copy across the "DestinatorApps" directory to the PPC manually using active sync instead of using the installer
2. Copy the "DestDll.dll" into the windows directory of the PPC manually using active sync
Now you have destator installed (almost) the DestDll.dll also needs to be registered!
3. to register the dll I used "regsvr_arm.exe". just copy it onto the device, and run then select the "DestDll.dll" to register it.
4. Run Destinator and active it with you licence code as you would have previously
i had problems with connecting the com ports on destinator....so i just followed these steps:
First you've got to pair your GPS.
Then go to the "COM" tab in the bluetooth manager
Add a new outgoing port with the GPS as device (use a free com port usually try every single port until it accepts it)
And then do this:
5. Copy the "DestinatorApps/Destinator/Destinator.ini" to your desktop
6. Open this in a hex editor and change where it says C.O.M.6 to the com port of your gps. Mine was Com4 so I just changed
the 6 to a 4.
7. Copy the "Destinator.ini" file back onto the PPC
steps 5-7 i dont know if this is necessary coz after i did these steps, i closed the destinator program and then ran it and the "GPS was found automatically"....but when u go to the gps settings on the destinator program its on COM 1....and COM 4 was not on the list......but i didnt bother trying to set it up as per instructions coz its already working for me......just another note, if u turn off your gps receiver while the destinator program is running and then turn on the receiver again ur not going to be able to connect to a gps satellite etc......u have to actually close the destinator program and start it again and it will again automatically connect ur gps......its a bit complicated trying to follow the instructions......but if u follow it properly it will work.......well it worked on my jasjar as well as my XDA II with WM2003SE.....good luck
yes, thanks hadn't thought of that....
of coarse I have tried searching, I have spent 3 hours doing so ... I have found lots of references especially to a post by believer... haven't as yet found the post which gives the actual full answer ...
found one which gave the ini mod for getting around the os check
-------
if anyone else is looking for answers that part is:
modify the [Platforms] section of C:\DestinatorApps\Installer\Console\Default.ini
add the line
P2577V351=ARM
-------
what I haven't found is the issue of the dll being registered.
Now that you have wasted everybodies time and had me write all of this, are you likely to be helpful and provide a link, (as you seem to know where it is) or are you more a smartass without a clue than a geovass.
Thank you irv777 nice to see someone with intelligence
no probs
davidberrysmith said:
Thank you irv777 nice to see someone with intelligence
Click to expand...
Click to collapse
You didnt search correct...
http://buzzdev.net/index.php?option...c=view&id=2529&catid=26&limit=15&limitstart=0
geovass, thanks for the link...
irv777, followed your instructions and the only thing I changed was to install from the consol and disconect the device when I got a error re registration of file. All the rest... Perfect.
Thanks again
Destinator on JasJar and regsvr_arm.exe
Can anybody please point me in the right direction as to find regsvr_arm.exe. I have followed all the directions so far and when I try run destinator I get a Destinator object creation error. The only thing I havn't done is the register bit, please.
here you go
Destinator turns off after some minutes
First of all, thank you everybody who gave instructions for the installation, of the Destinator specially for irv777. I followed the irv777 instructions and I could install the Destinator and configure the GPS perfectly. But I could notice that after using some minutes the Destinator, the screen of my Pocket PC turned off and when I turned it on again (using the light button), the GPS communication was lost because the GPS COM Port was changed. Does anybody have the same problem? Does anyone have any idea of what is happening in my case? I could realize that when I open the registry on HKEY_LOCAL_MACHINE/SOFTWARE/Apps/DestinatorApps of my Pocket PC it is different from the registry of the Pocket PC of my friend who installed the Destinator using the custom metodology (he doesn't have WM5). Is it the cause of that problem? If it is the cause how can I fix it? I don't know how to edit registry.
I havn't found any problems with it on mine. a possible work around for you might be to change the power and light settings so they don't turn off when you are using destinator.....
;-)
good luck
obviously i am doing something wrong here....
copy the destinator apps were in the ppc? i dont have enough memory eventhough my exec is recently formated (ppc 32mb free/destinator apps 36mb).
anybody?
edit: please mates.... i am leaving for a road trip in ten days and i could realy use a gps
Aussie topic - destinator cont'
hi guys,
I followed the instructions:
1. installed destinator on PC
2. copy all files (140MB) of them to the storage card
3. were trying to run ...\ARM\Independent\DestinatorApps\Destinator\Destinator.exe and got the error message described in the discussion
4. registered the dll in the windows directory...
now when trying to run the destinator.exe from the storage card I'm getting nothing (the screen flicker once)...
any ideas? any help would be appriciated.
irv777 said:
1. Copy across the "DestinatorApps" directory to the PPC manually using active sync instead of using the installer
2. Copy the "DestDll.dll" into the windows directory of the PPC manually using active sync
Now you have destator installed (almost) the DestDll.dll also needs to be registered!
3. to register the dll I used "regsvr_arm.exe". just copy it onto the device, and run then select the "DestDll.dll" to register it.
4. Run Destinator and active it with you licence code as you would have previously
i had problems with connecting the com ports on destinator....so i just followed these steps:
First you've got to pair your GPS.
Then go to the "COM" tab in the bluetooth manager
Add a new outgoing port with the GPS as device (use a free com port usually try every single port until it accepts it)
And then do this:
5. Copy the "DestinatorApps/Destinator/Destinator.ini" to your desktop
6. Open this in a hex editor and change where it says C.O.M.6 to the com port of your gps. Mine was Com4 so I just changed
the 6 to a 4.
7. Copy the "Destinator.ini" file back onto the PPC
steps 5-7 i dont know if this is necessary coz after i did these steps, i closed the destinator program and then ran it and the "GPS was found automatically"....but when u go to the gps settings on the destinator program its on COM 1....and COM 4 was not on the list......but i didnt bother trying to set it up as per instructions coz its already working for me......just another note, if u turn off your gps receiver while the destinator program is running and then turn on the receiver again ur not going to be able to connect to a gps satellite etc......u have to actually close the destinator program and start it again and it will again automatically connect ur gps......its a bit complicated trying to follow the instructions......but if u follow it properly it will work.......well it worked on my jasjar as well as my XDA II with WM2003SE.....good luck
Click to expand...
Click to collapse
Is the procedure similar if you have an embedded GPS?
I have a Mio P350 & want to put Destinator 3 on it, do you install the console on the PC first, if so what files & from where do you install on the PDA, & what do you install on the SD card?
Appreciate any help I can get, as the MioMap v3.2 is driving me crazy!
Hi,
I just tested successfully the following procedure:
1) install TT5 using .cab files (transfer to the device & run each one)
2) pair BT unit;
3) configure TT5 using "Other Bluetooth GPS", "max baud rate", "com 0";
4) close TT5;
5) copy the navigator.cfg file (in Programs\Navigator on your device) via Activesync to desktop;
6) open the file with wordpad - DO NOT ALTER anything else but COM0 to COM5;
7) close the file;
7b) save the file modified back to the device;
9) Turn on BT reciever;
10) start TT5, wait a few seconds and...voilà !
Cool
I'm glad to see that someone else has tried it and it works for them too.
thanks Italos !!!
Sorry for asking, is this registered TT5 or <you-must-know-what-I-meant> ?
Because I dont have a registered version, but it is working find with my Magician.
Thanks!
gogol said:
Sorry for asking, is this registered TT5 or <you-must-know-what-I-meant> ?
Because I dont have a registered version, but it is working find with my Magician.
Thanks!
Click to expand...
Click to collapse
We are not talking Magician we are talking Wizard
I had it working fine on my Magician, just like you
But I have upgraded to a Wizard and the above
process is what I had to do to get it work on the Wizard
Yeah I know that. We are talking about WIZARD.
That's why I use but ... meaning: it (my tomtom) is working fine with my Magician, but I dont know if it will work with WIZARD.
That's why I ask "What kind of tomtom do you use?" ... Registered? Or CRACKED one (like mine, in my Magician).
darkwarrior said:
gogol said:
Sorry for asking, is this registered TT5 or <you-must-know-what-I-meant> ?
Because I dont have a registered version, but it is working find with my Magician.
Thanks!
Click to expand...
Click to collapse
We are not talking Magician we are talking Wizard
I had it working fine on my Magician, just like you
But I have upgraded to a Wizard and the above
process is what I had to do to get it work on the Wizard
Click to expand...
Click to collapse
Makes no difference m8 - the problem seems to be "universal"
It should work if you follow those instructions, you have a BTGPS receiver and whatever install of TT5
Hi Guys,
New on this Forum, bought a Qtek 9100 a few days ago.
Have been struggling since to get tomtom 5 to work with my BT GPS, and
I just wanna say big thx to Italos for the instructions, worked like charm.
One thing though, I still got TomTom 5, I tried to install the 5.1 update and ended up in it saying it can´t find any maps...ok so back in version 5 all that was located in the "\My Documents\TomTom\CurrentMap.dat file. SSo I edited that one to point to my map on the storage card.
Fired up TomTom 5.1 again, and still not working, ok then I was not sure I had a real tomtom5 map, so I tried to extract the map from the TomTom5 DVD, well wen´t fine just to extract the cab, but I then ended up with these files.
00000.poi.010
000cline.006
000faces.004
0mapinfo.005
0traffic.009
SCANDI~1.000
SCANDI~1.007
tmccodes.008
I guess it will work if I extrackt these ones and replace those on my card, but how do I go about it?
I have tried with winrar, and that does not work, anyone who knows which program can extract these files?
thx / fahlis
Hi there XDA ppl
I have a HTC P3600 Trinity, the problems that i have with it is that the bluetooth wont work properly. When i start it and try to connect to a pc, it finds the pc but it fails to connect to it, the same for other phones. I managed to send one file to a Nokia E71, but was not able to be found by that phone when it searched for me.
I configured the bluetooth to be visible, and i made sure that receive all incoming beams was selected.
I have Radio Version 1.56.70.11
ROM Version: WM 6.5 SSD Blue(8) 24001 by The.Decoy
I changed the radio ROM with 1.50 and it still didn`t work. Changed the ROM a couple of times... Same result.
Any chance someone could help me?