Rom Version : 1.50f.blWWE
Is the rom correct?
Also ActiveSync 4.0 - MS Release does not allow the XDA to connect it detects it as Generic RNDIS (Prototype - Remember to Change IDVendor)
I did try to patch the nbf before flashing but the msg was cannot patch.
Please adivce as sync with IR is to slow
Storage 62 Mb
Program 56.34
Nand Disk 14.54
Any Suggestions ??
Thanks
Related
Hi,
I can't connect to the internet through my Qtek (via bluetooth)! Probably i do not have proper drivers for Mac OS X Panther (10.3.7). Help!
Computer discovered my Pocket PC and Pocket see my PowerBook by bluetooth, but "Could not open the communication device."
Earlyer I used mobile phone Nokia 6310i and everything work correctly.
Pleas help!
Best Regards and Thank You
Gene
p.s.
my computer info:
Machine Model: PowerBook G4 17"
CPU Type: PowerPC G4 (3.3)
Number Of CPUs: 1
CPU Speed: 1 GHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 1 MB
Memory: 1 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.6.2f1
on the pc you default can only do it while being connected to activesync
and let that handle it
i mean by default that the ms bluetooth stack on the xdaII dont support the PAN profile
you can solve it by using the vidcomm bluetooth stack you can find it if you do a search in the forum for vidcomm
THX
I try...
download
http://www.bluwireless.com/Widcomm14210.zip
...but I don't know it is right sollution for my problem. :roll:
Am I right. I have Macintosh only. :?
What shall I do with this software?
well if there is a cab file in the zip then you should install the cab file on your xda
eeeh
ok I try
I have only one file with cab extension "Data1.cab"
gl hf :?
NOT WORKING!!!
I surrender
when cab files are clicked on
on the xda then they autoinstall
B]I have IPAQ 5550 1.00.13 ENG [/B]
I have installed TomTom 5.21 + Benelux Map on it. So i have about 5-10 mbyte free memory left.
when i try to install Rom version 1.00.18 19 Nov 03
and restart the Ipaq its freeze at HP logo at blue screen.
-----------------------------------------------------------------------
I have download ROM Update 1.10 (7Apr 04) from
http://h18007.www1.hp.com/support/files/HandheldiPAQ/us/locate/105_5643.html
I set my Ipaq to flash mode itask+calendar+contact+Reset
[b](My computer is formatted only Windows XP PRO+Activesync+Flash file is installed No firewall is installed, No screen server, no program running at same time)[/b]
I disable Activesync before start flash CTRL+ALT+DEL kill wcescomm.exe
Ok flash starting normal when it is at 28% is does not continue it´s only froze / hang on /stop.
I use Sync/Charge usb cable NEW BUYED
I have try on 4 different Computers.
I have try with USB Cradle + 220 Power connected to cradle.
Same problem flash starting and froze at 28%
Could it be Because before flashing the Rom i must make a hard reset to clear all software and make free memory.
I have also try to edit FUU.BIN + KERNEL_SKUB128_1_10_10.nbf
with Ultraedit (www.ultraedit.com) and crop the first 2 lines and save is at
nk.nb0
And try flash with Multi-Port/USB TTY Ver1.11a (mtty MFC Application HTC)
But the USB Connection dont work, the program make fail....
I have try with Remote USB Update v1.1 (host11.exe)
the program say Lost USB Connection.....
Is here any forum members to fix the problem......
Thanks in advance
[email protected]
IT Help Runner, Denmark
Hi...not sure if I'll be able to offer any insight...
I've an iPAQ h5550 too & have managed to successfully update to the latest ROM & firmware available.
From my recollection, they are all cab files.
Upon running the exe files you downloaded, it will unpack into a local directory & subsequently transfer the cab files to the iPAQ via AS.
Then, you should watch the screen for instruction & follow them to complete the update.
These are updates...not upgrades so they do not need the iPAQ to be placed into bootloader mode.
I think with 5550, they do away with bootloader mode to update the ROM or firmware. Very similar to the Jornada range.
Did you try hard resetting the device?
Simultaneously pressing the iTask, Calendar & reset buttons for 10 secs will do the trick.
Here's the link to the info: http://www.ipaqrepair.co.uk/ipaq_battery.php
After the hard reset, you will have to perform the updates in the right order to bring the firmware to version 1.10 & ROM to version 1.10.
If I'm not mistake, it should be as follows:
Firmware update: 1.00.18
ROM Update: 1.10
Firmware update: 1.10
Hope this helps...
have no sound telephone dont work wlan dont work
many stuff dont work
can be that i have wrong upgraded
now i wana upgrade once more the same rom or other rom but
after i start the update active snyce close automatic and the the upgrade window in my pc say connection error 101
i used:
WM6.1 Pro CE OS 5.2.19209 (Build 19209.1.0.2) - TEST
xplode
What operating system are you using?
David389 said:
What operating system are you using?
Click to expand...
Click to collapse
you mean my smartphone?
i use MDA III
notebook os is windows xp
First of all you need to make sure that you have the latest version of Active Sync.
then follow one of the Wiki Guides
I am using this Rom and have had no problems
http://forum.xda-developers.com/showthread.php?t=403421
Also what Radio version Etc do you have
my problem is i cant upagrde other because the active sync close automaticily and then in the upgrade window say connection error 101
what is radio version ?
waht i can se in my smartphone is only CE 5.2.19209 (build 19209.1.0.2)
radio version 1.13.00
Uninstall and re-install active sync (V4.5)
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/activesync45.mspx
Also make sure that yo have set it to connect.
I had to hard reset
Hold power and push pointer into bottom of device
This site should also have some pointers
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-synch.mspx
Let me know how you get on..
Just thought,
have you added a EXT ROM package ie - one with office and some other programmes
I added one from another user (not ROM Cooker) and had similar problems.
David389 said:
Just thought,
have you added a EXT ROM package ie - one with office and some other programmes
I added one from another user (not ROM Cooker) and had similar problems.
Click to expand...
Click to collapse
This is the EXt ROM I tried and had the same issues
#17 10-05-2008, 02:54 PM
adambomb_13
Junior Member Join Date: Jul 2007
Posts: 21
--------------------------------------------------------------------------------
I just made a KILLER! EXT ROM for this
Here it is :
psshutxp
htcflashlite
Touch ImageViewer and TrueFFS_RGU BA
HTCHome.2.1_1005.722
JbedJava_MIDP_0_0_20070822_1_1_WWE
RDM
S2P-0.40-WM5
WU
SN PIE Download Plugin
Slide_2_Unlock_1.00-WM6_Support_Gif_Pic
Pointui.Home.1.5a.Wm5
PCMKeyboardEN-0.14
WU_enable
Arcsoft_MMS_5.0.31.7
NetworkPlugin_1_0_30468_1
AudioManager
BT_BPP_1_6_1_0
Windows_Live_10.6.0034.0800
MMS_enable
http://rapidshare.com/files/113973503/ExtROM.zip.html
dont work
why active synce lose automaticly?
I am not quite sure
do you have a card reader as there is a ROM on here that can be done with an SD card
i got a crad reader but
do any rom exist
and if i connect it normaly with not wana upgrade activ sync dont close automaticly
and i can transfer data but only if i wana upgrade them then active synce close automaticly
I have double checked and I am wrong, you canot upgrade ROM via SD Card.
Try switching your USB socket and updating drivers.
I wil look and see if there are any other solutions
I lie there is a way
1. Woking blue angel (with WM2003)
2. You need mtty
3. SD Card at least 64MB
Open mtty, put sd card in
Type:
Code:
USB>d2s 70020000 1060000 sd
MTTY is some kind of terminal emulation software, and in this case it is used to communicate to serial and/or USB enabled devices. On the HTC devices (including the Universal) it enables you to issue a selection of commands that allow you to read the status of som eof the components, to clear the bootloader flags, to format the internal flashdisk etc etc
mhh what i need to do?
i put mtty in sd card and sd card in mda III or in notebook?
oh man its so easy press recor button close button and reset button
now bootloadermode^^
and now i can upgrade^^
but thx for your help
I've successfully upgraded my Qtek 9090 to WM6 Pro (5.2.16.20)
-
ROM version: 5.60.00 WWE
ROM date: 03/02/05
Radio version: 1.12.00
Protocol version: 1337.42
All works great, but still I can't connect to ActiveSync 4.5
When I put the Qtek 9090 on cradle it ask to install Activesync 4.5 or newer ... but I've installed (and reinstalled) this tool, downloaded directly from MS site.
I've also Updated all the components on PC (SO, Office, etc ..) with Microsoft Update. But still I've this problem.
Please, could you give me any help ?
Thanks in advance.
Beppe
-
i got the same problem!
my 9090 says:
cannot open the connection usb, this connection is no longer valid ore exist, plz select a diffrent
it worked until now
Sorry, my English is bad. But I try to help because I had the same problem.
Which firewall is installed?
With the change of WM2003 on WM6 new rules must be allocated for ActiveSync.
Several ports (999, 5678 etc.) must be switched free or turn the firewall off for testing!
Simply turning off the network monitor at the Comodo Firewall.
Good luck!
Mathias
My Qtek 9090 ask for Activesync 4.5 or newer while connecting.
I have just tried with another PC with XP on board and a fresh copy of Activesync 4.5 - Same problem (ask for 4.5 or newer)
I'm quite sure the problem is on PDA.
I hope in some suggestion.
Thanks to all.
Beppe
-
do search on the forum.. you'll find what you need..
cheers
evo
check\uncheck in USB to PC - Enable advanced network funkcionality try which one of them will work with your pc
RESOLVED !!! (Yeahhh)
The problem was on network properties of Qtek, when connected.
Right-click (in control-panel/network-connection) the Qtek entry / Then properties
- check only tcp/ip protocol and MS network services
- I've disabled bindings for VPN and packet-trace utility
Activesync 4.5 WORKS GREAT NOW
Have a nice WM6 upgrade.
Beppe
-
guys how do I downgrade from 6.5 to 6.1? 6.5 It locks the Always use the camera does not make me ... when I connect the phone via usb coming out of my window into the 'bottom right corner that tells me that he found the hardware "HTC Magician," but not me active sync detects it and if I go to active sync on my phone tells me: "to Synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC.
If you company supports syncring directly with its Exchange Server you can set up your device to sync with it.
Learn more about synchronizing with a server "
What can I do?
excuse me for my pronunciaiton but i'm italian XD
Just install the 6.1 rom like you've done with 6.5
i've read this totuorial to flashing from sd, but
# download the 1.13BS rom or any other BIG Storage rom-image from the ftp
# get ntrw.exe from the ftp
# Download romupdate from the ftp
# Download the Hexeditor from the ftp
what is ftp?
Here is the xda-developers ftp-link:
ftp://ftp.xda-developers.com/Magician/Tools/Backup_tools1/
There are the programms you need.
EDIT:
Before you try to flash from your SD-Card, flash from your PC. If you need active sync connection, try active sync 4.5.
see a warning box that says:
Avviso
530 permission denied
What does this mean?
Sorry, wrong link,
try this:
ftp://xda:[email protected]/Magician/Tools/Backup_tools1/
and where i can take this?
the 1.13BS rom or any other BIG Storage rom-image
thank you ^^
guys... i've installed with a normal mode WM 6.1, but when i power on my device i see this:
HTCMAG_ROM_WWE_03
by Cotulla
64 RAM
Bad radio
What should I do?
fliz95 said:
guys... i've installed with a normal mode WM 6.1, but when i power on my device i see this:
HTCMAG_ROM_WWE_03
by Cotulla
64 RAM
Bad radio
What should I do?
Click to expand...
Click to collapse
Flash this Radio:
ftp://xda:[email protected]/Magician/Radio/MagicianRadio_1.12.00.zip