Database Users

HELP

Hi,
I have tried to upgrade my HTC 3300. I get as far as a white screen on my PDA, but after this i loose the connection with Windows Mobile Center and the machine automatically disconnects.
Then i get the error on my PC:
Error 260
Please help and e-mail to [email protected] if you have a sollution.
Kind regards
Michael

miriedl said:
Hi,
I have tried to upgrade my HTC 3300. I get as far as a white screen on my PDA, but after this i loose the connection with Windows Mobile Center and the machine automatically disconnects.
Then i get the error on my PC:
Error 260
Please help and e-mail to [email protected] if you have a sollution.
Kind regards
Michael
Click to expand...
Click to collapse
Update UPSL v0.1 by Pof
Link here :
http://forum.xda-developers.com/showthread.php?t=311403
And try again..!
Cheers...!

Hmmmm.
What do you mean with:
Update UPSL v0.1 by Pof
Michael

Pof is a user
UPSL is an unlocker utility so you can flash alternative ROM's
check the link - very informative.
reflashing your phone usually takes a weeks worth of reading if you care for your device.

And read it :
http://forum.xda-developers.com/showthread.php?t=312052
maybe it help you..!

Is there an easier way to explain this - Sorry i'm quite good working with my PC, but this was a bit greek:
All you need to do is:
1. Remove your SD card
2. Do a hard reset or clean storage (some programs like battery status block full access to your device)
3. Connect your mobile to PC and make sure that activsync connection is established
4. Start to flash your device with USPL, when DOS part end and your mobile switch to bootloader mode vista will find new device and start instaling new drivers.
5. Wait till vista finish installing new drivers and unplug your device, do a soft reset
6. Next step is to change vista drivers to xp, to do this you need to fallow this instruction:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemi d=27
7. After switching the drivers plug your artemis again and install USPL, there should be no more problems with connection lost (errors 260, 270)
8. When USPL instalation will finish you can flash any rom you want to your arte
Succesfully tested on my T-Mobile MDA UK now I've got WM6 WWE.
Thanks pof for your great release

That explination is about as clear as it gets in 'phone talk'.
Perhaps elaborate a bit on what is exactly, or what step is, throwing you off.

Windows XP
Hi again.
Would i solve the problem if i just installed it from an Windows XP machine at work?
One final thing - Do you know if the GPS will still be working afterwards.
Have a good night from Oslo - Norway
Kind regards
Michael

No sound and cant upgrade HELP

have no sound telephone dont work wlan dont work
many stuff dont work
can be that i have wrong upgraded
now i wana upgrade once more the same rom or other rom but
after i start the update active snyce close automatic and the the upgrade window in my pc say connection error 101
i used:
WM6.1 Pro CE OS 5.2.19209 (Build 19209.1.0.2) - TEST
xplode

What operating system are you using?

David389 said:
What operating system are you using?
Click to expand...
Click to collapse
you mean my smartphone?
i use MDA III
notebook os is windows xp

First of all you need to make sure that you have the latest version of Active Sync.
then follow one of the Wiki Guides
I am using this Rom and have had no problems
http://forum.xda-developers.com/showthread.php?t=403421
Also what Radio version Etc do you have

my problem is i cant upagrde other because the active sync close automaticily and then in the upgrade window say connection error 101
what is radio version ?
waht i can se in my smartphone is only CE 5.2.19209 (build 19209.1.0.2)
radio version 1.13.00

Uninstall and re-install active sync (V4.5)
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/activesync45.mspx
Also make sure that yo have set it to connect.
I had to hard reset
Hold power and push pointer into bottom of device
This site should also have some pointers
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-synch.mspx
Let me know how you get on..

Just thought,
have you added a EXT ROM package ie - one with office and some other programmes
I added one from another user (not ROM Cooker) and had similar problems.

David389 said:
Just thought,
have you added a EXT ROM package ie - one with office and some other programmes
I added one from another user (not ROM Cooker) and had similar problems.
Click to expand...
Click to collapse
This is the EXt ROM I tried and had the same issues
#17 10-05-2008, 02:54 PM
adambomb_13
Junior Member Join Date: Jul 2007
Posts: 21
--------------------------------------------------------------------------------
I just made a KILLER! EXT ROM for this
Here it is :
psshutxp
htcflashlite
Touch ImageViewer and TrueFFS_RGU BA
HTCHome.2.1_1005.722
JbedJava_MIDP_0_0_20070822_1_1_WWE
RDM
S2P-0.40-WM5
WU
SN PIE Download Plugin
Slide_2_Unlock_1.00-WM6_Support_Gif_Pic
Pointui.Home.1.5a.Wm5
PCMKeyboardEN-0.14
WU_enable
Arcsoft_MMS_5.0.31.7
NetworkPlugin_1_0_30468_1
AudioManager
BT_BPP_1_6_1_0
Windows_Live_10.6.0034.0800
MMS_enable
http://rapidshare.com/files/113973503/ExtROM.zip.html

dont work
why active synce lose automaticly?

I am not quite sure
do you have a card reader as there is a ROM on here that can be done with an SD card

i got a crad reader but
do any rom exist
and if i connect it normaly with not wana upgrade activ sync dont close automaticly
and i can transfer data but only if i wana upgrade them then active synce close automaticly

I have double checked and I am wrong, you canot upgrade ROM via SD Card.
Try switching your USB socket and updating drivers.
I wil look and see if there are any other solutions

I lie there is a way
1. Woking blue angel (with WM2003)
2. You need mtty
3. SD Card at least 64MB
Open mtty, put sd card in
Type:
Code:
USB>d2s 70020000 1060000 sd
MTTY is some kind of terminal emulation software, and in this case it is used to communicate to serial and/or USB enabled devices. On the HTC devices (including the Universal) it enables you to issue a selection of commands that allow you to read the status of som eof the components, to clear the bootloader flags, to format the internal flashdisk etc etc

mhh what i need to do?
i put mtty in sd card and sd card in mda III or in notebook?

oh man its so easy press recor button close button and reset button
now bootloadermode^^
and now i can upgrade^^

but thx for your help

Usb sync

Hi. Help me please! I have got x1 but i haven't got a cd. But i want to update my rom, but it is working on Active sync. The problem : my combuter doesn't know the devce, so i can't update my rom and i can't upload Wm 6.5 Please help me. Thanks

use another combuter

switch x1 in drive mode

There is absolutely no need for the original CD, i have one but i have never put in the the computer, i don't know even what's on it
I use my X1 with 2 computers, a Vista and an XP Pro, both recognized the x1 with no special drivers, activesync ok.
to update the ROM, check the X1 ROM forum here, there is a method without PC (the MicroSD method), which i use and is very fast and easy.

Does anyone know whether there are any prog that allow usb host on the xperia? I want to plug my hard drive into it w/o using a computer

It doesn't exist simply becuase xperia doesn't has the hardware to be a usb host.

so
So, thank you for all, but my problem is still. So, I've got windows xp and x1, the usb driver connect is very godd, it is working, but if i choose the Active sync the xp doesn't know the device. I don't know why. Should i have a driver or another program ? I want to update my rom and Wm 6.5. Please help

install xp sp3
remove option something about "advanced network capabilities"
install active sync
then (re)install outlook (2007)

Ethermind said:
install xp sp3
remove option something about "advanced network capabilities"
install active sync
then (re)install outlook (2007)
Click to expand...
Click to collapse
THANK YOU VERY MUCH
The problem was the active sync, I insalled it

glad to know this

needed real help for upgrading 6.5

when i try to upgrade my xda!! with the usb data cable it sometimes sync with system & sometimes not. after sync when i try to upgrade it shows error 101 is there any real heroes who solve this problom !?!?
datacable is ok !

i've v1.3 xda!! it shows usb when connected with pc but not upgrading !!!!!!!
really funny for htc makers ...
it is essential to put power cradle with datacable when upgrading rom !?

where are the rom developers !?!?
hay bro give me some software or tricks which made activesync connection unbrakable coz xda!! ends partnership with pc.

it shows USB when connected with pc but can't runs the upgrade process.
bootloader screen shows USB
v1.03 without lightning screen but not upgrading !!!!

error 101? Thats connection error i think.
Just one thing. Have a look at the n00b guide to upgrading by ather.
SEARCH: himalaya n00b guide
That give details about upgrading on Windows XP Or Vista
flyboy

hay bro i try all that stuffs & guides but cannot get any ideas is there any tricks to make xda2 connected with system without brake it ???

can anyone gives me their sd card headers !?!?!?!?!?
it's possible afterwards putting it on sd card and then create .nbf files.

hay brothers plz help fast yaar before put it to garbage or throwing the device ha ha ha lol :*:*

hi have you downloaded latest activsinc i sometimes need to re down cause it plays up so reinstall it usualy do the trick another thing my device stays dark when i up it

maxoutputuk said:
hi have you downloaded latest activsinc i sometimes need to re down cause it plays up so reinstall it usualy do the trick another thing my device stays dark when i up it
Click to expand...
Click to collapse
nope bro,
the problom is not regarding active sync or system i think it gone out from its age lol..
actually it needs sd card headers from another himalaya... so if u've sd card header then send me...
regards.

flyboyovyick said:
error 101? Thats connection error i think.
Just one thing. Have a look at the n00b guide to upgrading by ather.
SEARCH: himalaya n00b guide
That give details about upgrading on Windows XP Or Vista
flyboy
Click to expand...
Click to collapse
hay bro,
what's up ???
actually i need sd card headers from himalaya, if u've that then send it to me.

Help with upgrading from windows mobile 2003 to 6.5
I have an O2 XDA II with windows mobile 2003 on it.
When in Bootloader Mode it says v1.01
when connected to the PC it says USB so i know its working in its own little way
I am trying to upgrade it to windows mobile 6.5.
I have tried everything so far and searched forums and tried things suggested on them but i just cant seem to do it.
Can someone send me a guide on how to do it please.
id be very greatful.
Thanks in advance.

kaashp: Doesn't your himalaya read sd cards then?
mikeymcmk: iam willing to give you a guide, have you got msn?
i will guide you through it as your doing it.

It reads SD cards but i didnt manage to do it that way either.
I got an error message saying copy to SD card failed.
my MSN is [email protected]
if you email me at [email protected] and let me know when your online and what i need to download, il log onto MSN.
cheers mate, very appreciated.
(i receive my emails on the above email address near enough instantly)

KAASHP said:
nope bro,
the problom is not regarding active sync or system i think it gone out from its age lol..
actually it needs sd card headers from another himalaya... so if u've sd card header then send me...
regards.
Click to expand...
Click to collapse
Okay, from begining
Answer in points like I ask you questions
1. Can you enter bootloader? (serial text on screen without backlight)
2. Which Bootloader version do you have? It is written on screen when in bootloader mode at bottom (like 1.03v)
3. If you put your device into crandle (of course crandle is connected to usb in your pc/laptop) do USB text appear in place where Serial text was already?
4. Which system do you use? (Xp, vista, 7, linux, unix, amiga, commodore)
5. Do you have nk.nbf and Upgrade.exe or HimaUpdate(...).exe in THE SAME folder?
6. What happens if you run update application and click Next?
7. Did you tried to run in administrate mode?
8. Do you have x64 system?
9. Do you have himalaya? put out your battery and check if it is written PH10B or PH10A.
10. Did you tried another PC or another crandle?
11. Which rom you want to flash?
Answer here.

HI,
1. yes
2. v1.01
3. yes USB is displayed
4. windows 7. ( i have XP aswel which i tried and failed also)
5. Yes. Both files in same folder on my desktop.
6. it says checking information on your PDA then says connection failed.
I tried it when not in bootloader mode aswell and it said it was erasing everything off my PDA but then said connection failed straight away.
7. Yes tried it in admin mode but same error messages.
8. no not using x64 system.
9. under the battery it says PH10B
10. Yes, tried my laptop and also my desktop.same errors on both of them.
11. Ive tried a few ROMs. any ROM will do realy. just want to get rid of windows mobile 2003.
Thanks for your quick replies.
ive updated alot of phones from windows 2003 to windows 6.5 but this 1 is just stubbon lol.
could it be the handset is faulty?
im waiting for another handset to come which is identical but originaly on T-Mobile not O2 like this 1.

sorry for not getting back to you im only a noob 2 things may be wrong sounds like faulty socket on phone or faulty cable/cradle try wobbling the cable gently when connected all sounds obvious but we are talking grandad of mobiles you cannot as far as i know go strait from 2003 to 6.5 i just got to 6.5 if you get a stable connection you have to go 2003se then 5 from there went to swampys blue silk now aeroflylubys hybred 6.5 all running perfect also athers memory program came in handy i used microsoft activsync 4.5 for xp win7 is a brill os but xp did it for me

aeroflyluby said:
4. Which system do you use? (Xp, vista, 7, linux, unix, amiga, commodore)
Click to expand...
Click to collapse
ROFL! amiga!!! AMIGA FOREVER!!!!

Ive just had another O2 XDA II and a TMobile MDA II throught the post.
ive just ordered a new cradle today aswell, as the 1 I was using was slightly cracked on the bit that connects to the phone.
So that might of been the problem.
im unable to test until the new cradle comes (hopefully in the morning)
il keep you posted.
cheers

Hey! Mikey! Join our irc channel:
Server: irc.afterx.net
Channel: #himalaya
Or anyone can join who has anything to discuss about the htc himalaya.

[Q]0x85010014 Problem PC Sync

Ok , I Installed a cooked ROM for my HTC:Leo HD2
and now I cant get this thing working ..
how can i transfer music + apps ?
I got american android also .. how can I add apps in there ?
the computer reconizing the phone as an HP camera or not reconizing at all ..
0x85010014
XP SP2

???????????????????????????????????????? some one ?

Please post everything you see in bootloader, what ROM you installed, and what type of HD2 you have EU or TMOUS.

I got T mobile phone
Energy cookie 2.0 rom
Leo radion 2.12 XXX50XXX
American Android ..
and thats it

PLease people .. pleaseeeeeeee

ILPsycho said:
PLease people .. pleaseeeeeeee
Click to expand...
Click to collapse
The following work for WM6, I don't know anything about android versions:
Transfer music: Hook up the phone to the computer and set it to be a storage device. Then open up Windows Media Player and sync your music.
Transfer apps: Hook up the phone to the computer and set it to be a storage device. Then copy the .cab files to the phone and use Total Commander: find the file and click to install.
You don't have to sync your PC to transfer files and applications to the phone. The computer does have to recognize the device as a USB storage device. If that is not happening there may be a problem with your USB port.
It is not the ROM; I am using NRG myself.