Frozen screen with Via Michelin 4.4 and BT 77 GPS - MDA II, XDA II, 2060 General

Hi everybody
Some posts ago I asked questions to find right parameters to connect with my BT 77 bluetooth GPS.
Using VisualGPSce I finally found COM5/38400 as parameters to connect with. Knowing that, I used Via Michelin 4.4 with those parameters and wait ...
Some minutes later I obtained the satellits signals in the GPS test screen of ViaMichelin but after that ViaMichelin got frozen.
I'm near the goal but something is missing.
Thanks for your help.
Appareil QTEK 2020
ROM 1.72.02FRA
RADIO : 1.14.00
PROTOCOLE : 1337.24
EXTROM : 1.72.603

Bluetooth driver Microsoft or Widcomm
I'ts me again
I tried to replace the Microsoft drivers by the Widcomm ones with a .cab found on the net.
1 : Delete of key HKLM\Services\BTIcon to uninstall Microsoft drivers
2 : Install of BluetoothGPS.cab to install Widcomm drivers
It has been great during one hour.
Via Michelin 4.4 was OK with my GPS BT77 on port 7
After that I got "Bttray : "the BT radio failed to turn on due to insufficient driver memory available" and "BTTrayCE BT could not be correctly initialized".
Of course memory is actualy not concerned.
Then it has been impossible to turn bluetooth ON without obtain the message "BTTrayCE BT could not be correctly initialized"
I think the .cab to install Widcomm was not good because during installation I got messages about the fact that e-PocketSetup was not a valid official version.
Is it possible to find a good installation for Widcomm drivers (or others) for Windows CE 2003 ?
The problem is this Microsoft driver for Bluetooth.
How to find another one ?
Thanks

Related

Qtek 2020 , Socketcom GPS Bluetooth issue

I install wireless GPS Bluetooth from Socketcom but after when I run tha "MyNavigator" program I receive a windows with
Warning
Sound files are missing or corrupted.
Please reinstall from CD-ROM
and the program doesnt works.
Could you help me?
thanks

Ipaq Bluetooth headphones

Can somebody be fair to say in which condition they succeed to make it work with XDA II / QTEK 2020. I have tried to install widcomm stack as explained in other thread http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=0
But with 2.2 or 2.06 rom I only get not enough memory when I try to start it.
So which version of Rom, Radio and Extend can be used with widcomm BT stack. and does it really work with HD ipaq BT Headhones ?
Thank you
i dont believe that any of the bluetooth stacks support a2dp which is as far as i know required to get stereo sound to such a headset
Ipaq Bluetooth headphones does work with XDAII
I have made it worked with XDAII, but you have to use either Widcomm stack version 1.0.0.3500 or 1.5.0.2000.
My ROM version is 1.72, Radio 1.17 and my own Customized Ext. ROM. I did try it with 2.2 ROM but the BT stack is a bit unstable (every now and then it reported not enough memory, especially when you have lots of thing loaded on Today screen) so I downgraded back to 1.72.
I also had this headphone worked with PC using IVT Bluesoleil stack.
Thank you I will try to downgrade again to 1.72. rom.
Is it possible to post me the complete reg modification I am not sure that in the thread wher I got the widcomm stack http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=0
it is a complete and I expect to be the reason of the memory trouble ?
Another fact is that I am using a french version of 1.72 ??
Thanks for any help
The complete reg modification is on this page:
http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=50
Cheers,
I finally succeed to install the widcomm stack with Stero Profile . The way I used is :
1) Remove [HKEY_LOCAL_MACHINE\Services\BTIcon]
2) Remove [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Transports\BuiltIn\3]
3) Reset
4) install "Broadcom Widcomm 1.5.0.0801 PPC.cab" which is somewhere in the forum
5) copy all the files of Widcomm 1.5.0.200 in windows directory
6) Install Platformxxx.reg
7) reset
8) Install "Broadcom Corporation BT-PPC AV.cab" included in the file I found in the forum in "Broadcom Corporation BT-PPC AV.zip"
And now I can pair and use HP BT stereo Headphones whitout anyproblem on any version of the Rom.....
Just buttons of the headphones are not working is it the same for all ?
and Headset profile doesn't work anymore whith my BT Headset.
I will try with my BT GPS and BT Stowaway Keyoard and Mouse.

BLUETOOTH PROBLEMS !(for TomTom GPS receiver) HELP ME please

hi guys i'm a newby (this forum is great!)
i'm from Italy
i've a problem for my S100-Jam-Magician smartphone.
The Bluetooth doesn't work...
i tried before to connect a my friend's phone via bluetooth, the magician recognize the phone (i can read the name of the phone in the bluetooth settings) but the communication doesn't work.
i cant't upgrade the phone on clubuimate, (i don't have the time to explain) so i'm here.
now i've bought this GPS receiver (Sirf STAR III) http://www.handnav.co.uk/product_details.php?id=228
and i've installed the tomtom navigator 5 software (it works) with italian Map.
as for the phone The Magician relevate the name of the receiver, but it doesn't work, there are problems and the bluetooth connection go down automatically. (i've tried normal ways e all normal settings combination - port 4 , 5 , but nothing-9
Appears continuosly the message
"Desligue o modo de voo em primeiro lugar!"
i think it's spanish or portoguese, but i don't undestand why, because i have the italian rom. U(maybe because i had installed before another version of tomtom navigator with portoguese map?)
i've read other post about bluetooth but the tools doesnìt work and i haven't founded the .cab file that maybe solve bluetooth problems.
Can you help me ?
i'm in troubles !
SOLUTIONS :
1) some patch to install that resolve bluetooth problems
it should better because the phone works good...
2) upgrade magician ROM
i don't know which is my rom version
during the magician rebooting appear
R 1.05.00 G 1337.39 D 1.06.04 ita
however i think it is old...
with an official (on clubimate) newer version are there bletooth improvings ?
IMPORTANT
a - i'd like a working italian version
b - i have seen the upgrading post for magician and i HAVE NOT UNDERSTOOD ANITHING...because i'm not a tecnich or expert...only a normal user ... forgive me
there is a easier and more detailed tutorial?
is there some italian user that can help me?
my msn accont is [email protected]
thankyou
The ?best? bt patch can be found here: O2 MINI NEW BLUETOOTH STOCK.
http://forum.xda-developers.com/viewtopic.php?t=33532&highlight=magician+stock+bt
Login to be able to download.
Find yourself a rom on the ftp, either shipped-rom (.exe) or image file (.nb1) and give me signal what you've chosen. I'll send you the instructions for the necessary steps.
Cheers, M
Hello!
Before upgrading your Magician, You should test your bt GPS connection with an other little GPS software like cemonitor ( download link--> http://www.gpspassion.com/fr/download.asp?dl=1 )
Try to find your BT GPS com Port normally is com 5. If not I give you a little soft that map the com5 automatically at start. It is "tomtom5patch.exe" that must be on your "\windows\Startup\" folder.
SoftReset your Magician after this install.
In CEmonitor, set the com 5 and look if your GPS communicate.
I forgot to tell you to set the BT GPS on the windows settings, with the correct password. You probably made it before.
Try it and ask again...
nothing to do
the first patch is good but doesn't resolve my problem
that damned write in spanish continues to appaer when i try to make bluetooth work and bluetooth shut down.
the second patch doesn't work, when
i think i have installed a wrong or damnaged software on the PDA in the past that has ruined something...
THANK YOU for the helping,
now i'll try to install a new rom with your help.
have you got any suggestion for the rom to install?
do they work all fine, even in italy? wìhich is the best one in your opinion?
is there the risk to damnage the magician?
There's a 1.12ITA shipped-rom on the ftp under magacian. This is the safest upgrade.
- make a backup of every piece of data you want to keep, especially contacts, calendar, tasks. Everything will be lost & programs need to be reibstalled
- synchronize with outlook via Act.Sync
- Download the ITA1.12 shipped-rom
- execute the downloaded file
- follow instructions on your PC & watch the progress on the magician as well
- when finished, you'll be asked to hard-reset
- hard-reset & enjoy the upgraded magician
- synchronize the outlook data
- reinstall your programs
That's it.
Regards, M
it seems simple...
now i try
grazie !!
thank you all
now al things work perfectly.
You're welcome.
Hi,that message(desligue o modo de....)compare from a few time on my magician.The rom is the same from 8 month,and the messagge compare from 1 month.The only things that I change are the 2 giga sandisk,and I installed 3 different navigator on my device.I don't think the problem comes from rom(1.12 ita),maybe from sd or other navigator?

install MS bluetooth stack in Vista

Hi!
I've googled all day long to find a working tutorial to install the Microsoft bluetoot stack in Vista. I've tried everything but nothing helped. I try to write a bluetooth application to communicate with my pda. It's absolutely necessary to install the MS bluetooth stack so please help me!
Thanks!
i believed it was nativly a part of vista it sure is on my hp laptop
on my thinkpad there's the broadcom but i want to use the ms stack. there are possibilities to change that but i don't exactly know how that works! the problem also is that i can't really chose the driver i want to because the auto installation can't be aborted!
i want to write an application with the 32feet library and i have problems with the communication between the pda and the laptop and i think that it is caused by the wrong stack!
Does nobody have an idea?

[Q] Problems with the Widcomm Bluetooth Stack

For a running project we moved from old HP PDAs to new HTC "Touch 2" smartphones. But unfortunately the bluetooth stack preinstalled on these devices isn't accepted by Labview Mobile applications, and the Widcomm stack in Labview is not compatible with this phone.
I did the following procedure to try and get the program working:
Labview BT stack
Hard reset of device
Turn on bluetooth, set to discoverable
Via LabView/Project Manager/ Windows Mobile 6 Device/ Install / "Support for Widcomm Bluetooth" install BT support on PDA, accept install on PDA.
Soft reset PDA, after reset the message "'BTTrayCE' is not a valid Pocket PC Application" is shown, and it's not possible to turn on BT.
By removing "BtCoreIf.dll" & "BtSdkCE30.dll" from the /Windows dir on the PDA, and soft reset, BT will turn on again.
Start Labview application (StimCom CRE_PDA.exe)
Select 'Search for BT devices'
StimCom CRE_PDA.exe will crash, and WM asks for error reporting
notes: method above installs Widcomm stack for Windows mobile version 3. The program is listed on the PDA as "NI Labview Pocket PC Bluetooth support 7.1". Uninstalling this program from the 'remove programs' will fail.
On the clean HTC image "BtSdkCE50.dll" and "BtSdkCE30.dll" are present in the Windows directory, so I assume that both v3 and v5 of the Widcomm stack are allready installed.
This leads to the conclusion that Widcomm v3 stack is needed, but the one provided with Labview is not compatible to this system, and the version present on the device is not compatible with Labview.
(v4 doesn't exist)
Step 1 till 3 are enough to get the Labview program running on a Sony Erricson Eperia with "Jack v5.0" WM6.5 firmware (the same BT hardware?) and on a HTC Touch with a Dutch WM 6.0.
According to http://zone.ni.com/reference/en-XX/help/372508B-01/lvpdagsm/pda_install_widcomm/ when both the "BtSdkCE30.dll" and "BtSdkCE50.dll" are already present, you must only copy LVBtw.dll into the Windows folder of the device. I tried that as well, but the program still crashed as soon as you try the bluetooth connection.
I also tried to copy "BtCoreIf.dll" & "BtSdkCE30.dll" from the /Windows dir of a Xperia WM6.5 (Custom firmware "Jack v5.0" (International English) because that device also had WM6.5 and the program worked fine on that device. But on the HTC Touch 2 it gave the "'BTTrayCE' is not a valid Pocket PC Application" error.
The same error is given when I try to install the Widcomm stack for x51v ( http://www.mobilitysite.com/boards/...widcomm-axim-x50v-x51v-state-development.html ), and the same error is given if I copy these files from the Broadcomm SDK (BTWCE-1_7_1_5201-SDK.zip)
Firmware of the HTC Touch2 NLD:
R 3.48.25.27
G 61.41t.25.31H
D 1.28.66092
Any suggestions on how to fix the problems with the BT stack?
(install custom firmware is not an option, due to legal issues)
Thanks in advance.
(the question is also asked in the NI developers zone: http://forums.ni.com/t5/LabVIEW/Err...ocket-PC-Application-quot/m-p/1272414#M531155 upto now no answers have been given)

Categories

Resources